* [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
@ 2021-08-30 23:35 Max Gurtovoy
2021-09-01 3:38 ` Feng Li
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Max Gurtovoy @ 2021-08-30 23:35 UTC (permalink / raw)
To: hch, mst, virtualization, kvm, stefanha
Cc: israelr, nitzanc, oren, linux-block, axboe, Max Gurtovoy
No need to pre-allocate a big buffer for the IO SGL anymore. If a device
has lots of deep queues, preallocation for the sg list can consume
substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
can be 64 or 128 and each queue's depth might be 128. This means the
resulting preallocation for the data SGLs is big.
Switch to runtime allocation for SGL for lists longer than 2 entries.
This is the approach used by NVMe drivers so it should be reasonable for
virtio block as well. Runtime SGL allocation has always been the case
for the legacy I/O path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
---
drivers/block/virtio_blk.c | 37 ++++++++++++++++++++++---------------
1 file changed, 22 insertions(+), 15 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 77e8468e8593..9a4c5d428b58 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -24,6 +24,12 @@
/* The maximum number of sg elements that fit into a virtqueue */
#define VIRTIO_BLK_MAX_SG_ELEMS 32768
+#ifdef CONFIG_ARCH_NO_SG_CHAIN
+#define VIRTIO_BLK_INLINE_SG_CNT 0
+#else
+#define VIRTIO_BLK_INLINE_SG_CNT 2
+#endif
+
static int virtblk_queue_count_set(const char *val,
const struct kernel_param *kp)
{
@@ -99,7 +105,7 @@ struct virtio_blk {
struct virtblk_req {
struct virtio_blk_outhdr out_hdr;
u8 status;
- struct scatterlist sg[];
+ struct sg_table sg_table;
};
static inline blk_status_t virtblk_result(struct virtblk_req *vbr)
@@ -188,6 +194,8 @@ static inline void virtblk_request_done(struct request *req)
{
struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
+ sg_free_table_chained(&vbr->sg_table, VIRTIO_BLK_INLINE_SG_CNT);
+
if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
kfree(page_address(req->special_vec.bv_page) +
req->special_vec.bv_offset);
@@ -291,7 +299,15 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
return BLK_STS_RESOURCE;
}
- num = blk_rq_map_sg(hctx->queue, req, vbr->sg);
+ vbr->sg_table.sgl = (struct scatterlist *)(vbr + 1);
+ err = sg_alloc_table_chained(&vbr->sg_table,
+ blk_rq_nr_phys_segments(req),
+ vbr->sg_table.sgl,
+ VIRTIO_BLK_INLINE_SG_CNT);
+ if (err)
+ return BLK_STS_RESOURCE;
+
+ num = blk_rq_map_sg(hctx->queue, req, vbr->sg_table.sgl);
if (num) {
if (rq_data_dir(req) == WRITE)
vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT);
@@ -300,7 +316,7 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
}
spin_lock_irqsave(&vblk->vqs[qid].lock, flags);
- err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg, num);
+ err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg_table.sgl, num);
if (err) {
virtqueue_kick(vblk->vqs[qid].vq);
/* Don't stop the queue if -ENOMEM: we may have failed to
@@ -309,6 +325,8 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
if (err == -ENOSPC)
blk_mq_stop_hw_queue(hctx);
spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
+ sg_free_table_chained(&vbr->sg_table,
+ VIRTIO_BLK_INLINE_SG_CNT);
switch (err) {
case -ENOSPC:
return BLK_STS_DEV_RESOURCE;
@@ -687,16 +705,6 @@ static const struct attribute_group *virtblk_attr_groups[] = {
NULL,
};
-static int virtblk_init_request(struct blk_mq_tag_set *set, struct request *rq,
- unsigned int hctx_idx, unsigned int numa_node)
-{
- struct virtio_blk *vblk = set->driver_data;
- struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq);
-
- sg_init_table(vbr->sg, vblk->sg_elems);
- return 0;
-}
-
static int virtblk_map_queues(struct blk_mq_tag_set *set)
{
struct virtio_blk *vblk = set->driver_data;
@@ -709,7 +717,6 @@ static const struct blk_mq_ops virtio_mq_ops = {
.queue_rq = virtio_queue_rq,
.commit_rqs = virtio_commit_rqs,
.complete = virtblk_request_done,
- .init_request = virtblk_init_request,
.map_queues = virtblk_map_queues,
};
@@ -805,7 +812,7 @@ static int virtblk_probe(struct virtio_device *vdev)
vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
vblk->tag_set.cmd_size =
sizeof(struct virtblk_req) +
- sizeof(struct scatterlist) * sg_elems;
+ sizeof(struct scatterlist) * VIRTIO_BLK_INLINE_SG_CNT;
vblk->tag_set.driver_data = vblk;
vblk->tag_set.nr_hw_queues = vblk->num_vqs;
--
2.18.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
2021-08-30 23:35 [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data Max Gurtovoy
@ 2021-09-01 3:38 ` Feng Li
2021-09-01 10:19 ` Max Gurtovoy
2021-09-01 6:18 ` Christoph Hellwig
2021-09-27 11:53 ` Christoph Hellwig
2 siblings, 1 reply; 6+ messages in thread
From: Feng Li @ 2021-09-01 3:38 UTC (permalink / raw)
To: Max Gurtovoy
Cc: hch, mst, virtualization, kvm, stefanha, israelr, nitzanc, oren,
linux-block, Jens Axboe
Does this hurt the performance of virtio-blk?
I think a fio result is needed here.
On Tue, Aug 31, 2021 at 7:36 AM Max Gurtovoy <mgurtovoy@nvidia.com> wrote:
>
> No need to pre-allocate a big buffer for the IO SGL anymore. If a device
> has lots of deep queues, preallocation for the sg list can consume
> substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
> can be 64 or 128 and each queue's depth might be 128. This means the
> resulting preallocation for the data SGLs is big.
>
> Switch to runtime allocation for SGL for lists longer than 2 entries.
> This is the approach used by NVMe drivers so it should be reasonable for
> virtio block as well. Runtime SGL allocation has always been the case
> for the legacy I/O path so this is nothing new.
>
> The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
> support SG_CHAIN, use only runtime allocation for the SGL.
>
> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
> Reviewed-by: Israel Rukshin <israelr@nvidia.com>
> ---
> drivers/block/virtio_blk.c | 37 ++++++++++++++++++++++---------------
> 1 file changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> index 77e8468e8593..9a4c5d428b58 100644
> --- a/drivers/block/virtio_blk.c
> +++ b/drivers/block/virtio_blk.c
> @@ -24,6 +24,12 @@
> /* The maximum number of sg elements that fit into a virtqueue */
> #define VIRTIO_BLK_MAX_SG_ELEMS 32768
>
> +#ifdef CONFIG_ARCH_NO_SG_CHAIN
> +#define VIRTIO_BLK_INLINE_SG_CNT 0
> +#else
> +#define VIRTIO_BLK_INLINE_SG_CNT 2
> +#endif
> +
> static int virtblk_queue_count_set(const char *val,
> const struct kernel_param *kp)
> {
> @@ -99,7 +105,7 @@ struct virtio_blk {
> struct virtblk_req {
> struct virtio_blk_outhdr out_hdr;
> u8 status;
> - struct scatterlist sg[];
> + struct sg_table sg_table;
> };
>
> static inline blk_status_t virtblk_result(struct virtblk_req *vbr)
> @@ -188,6 +194,8 @@ static inline void virtblk_request_done(struct request *req)
> {
> struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
>
> + sg_free_table_chained(&vbr->sg_table, VIRTIO_BLK_INLINE_SG_CNT);
> +
> if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
> kfree(page_address(req->special_vec.bv_page) +
> req->special_vec.bv_offset);
> @@ -291,7 +299,15 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
> return BLK_STS_RESOURCE;
> }
>
> - num = blk_rq_map_sg(hctx->queue, req, vbr->sg);
> + vbr->sg_table.sgl = (struct scatterlist *)(vbr + 1);
> + err = sg_alloc_table_chained(&vbr->sg_table,
> + blk_rq_nr_phys_segments(req),
> + vbr->sg_table.sgl,
> + VIRTIO_BLK_INLINE_SG_CNT);
> + if (err)
> + return BLK_STS_RESOURCE;
> +
> + num = blk_rq_map_sg(hctx->queue, req, vbr->sg_table.sgl);
> if (num) {
> if (rq_data_dir(req) == WRITE)
> vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT);
> @@ -300,7 +316,7 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
> }
>
> spin_lock_irqsave(&vblk->vqs[qid].lock, flags);
> - err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg, num);
> + err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg_table.sgl, num);
> if (err) {
> virtqueue_kick(vblk->vqs[qid].vq);
> /* Don't stop the queue if -ENOMEM: we may have failed to
> @@ -309,6 +325,8 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
> if (err == -ENOSPC)
> blk_mq_stop_hw_queue(hctx);
> spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
> + sg_free_table_chained(&vbr->sg_table,
> + VIRTIO_BLK_INLINE_SG_CNT);
> switch (err) {
> case -ENOSPC:
> return BLK_STS_DEV_RESOURCE;
> @@ -687,16 +705,6 @@ static const struct attribute_group *virtblk_attr_groups[] = {
> NULL,
> };
>
> -static int virtblk_init_request(struct blk_mq_tag_set *set, struct request *rq,
> - unsigned int hctx_idx, unsigned int numa_node)
> -{
> - struct virtio_blk *vblk = set->driver_data;
> - struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq);
> -
> - sg_init_table(vbr->sg, vblk->sg_elems);
> - return 0;
> -}
> -
> static int virtblk_map_queues(struct blk_mq_tag_set *set)
> {
> struct virtio_blk *vblk = set->driver_data;
> @@ -709,7 +717,6 @@ static const struct blk_mq_ops virtio_mq_ops = {
> .queue_rq = virtio_queue_rq,
> .commit_rqs = virtio_commit_rqs,
> .complete = virtblk_request_done,
> - .init_request = virtblk_init_request,
> .map_queues = virtblk_map_queues,
> };
>
> @@ -805,7 +812,7 @@ static int virtblk_probe(struct virtio_device *vdev)
> vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
> vblk->tag_set.cmd_size =
> sizeof(struct virtblk_req) +
> - sizeof(struct scatterlist) * sg_elems;
> + sizeof(struct scatterlist) * VIRTIO_BLK_INLINE_SG_CNT;
> vblk->tag_set.driver_data = vblk;
> vblk->tag_set.nr_hw_queues = vblk->num_vqs;
>
> --
> 2.18.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
2021-08-30 23:35 [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data Max Gurtovoy
2021-09-01 3:38 ` Feng Li
@ 2021-09-01 6:18 ` Christoph Hellwig
2021-09-27 11:53 ` Christoph Hellwig
2 siblings, 0 replies; 6+ messages in thread
From: Christoph Hellwig @ 2021-09-01 6:18 UTC (permalink / raw)
To: Max Gurtovoy
Cc: hch, mst, virtualization, kvm, stefanha, israelr, nitzanc, oren,
linux-block, axboe
On Tue, Aug 31, 2021 at 02:35:00AM +0300, Max Gurtovoy wrote:
> No need to pre-allocate a big buffer for the IO SGL anymore. If a device
> has lots of deep queues, preallocation for the sg list can consume
> substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
> can be 64 or 128 and each queue's depth might be 128. This means the
> resulting preallocation for the data SGLs is big.
>
> Switch to runtime allocation for SGL for lists longer than 2 entries.
> This is the approach used by NVMe drivers so it should be reasonable for
> virtio block as well. Runtime SGL allocation has always been the case
> for the legacy I/O path so this is nothing new.
>
> The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
> support SG_CHAIN, use only runtime allocation for the SGL.
>
> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
> Reviewed-by: Israel Rukshin <israelr@nvidia.com>
> ---
> drivers/block/virtio_blk.c | 37 ++++++++++++++++++++++---------------
> 1 file changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> index 77e8468e8593..9a4c5d428b58 100644
> --- a/drivers/block/virtio_blk.c
> +++ b/drivers/block/virtio_blk.c
> @@ -24,6 +24,12 @@
> /* The maximum number of sg elements that fit into a virtqueue */
> #define VIRTIO_BLK_MAX_SG_ELEMS 32768
>
> +#ifdef CONFIG_ARCH_NO_SG_CHAIN
> +#define VIRTIO_BLK_INLINE_SG_CNT 0
> +#else
> +#define VIRTIO_BLK_INLINE_SG_CNT 2
> +#endif
> +
> static int virtblk_queue_count_set(const char *val,
> const struct kernel_param *kp)
> {
> @@ -99,7 +105,7 @@ struct virtio_blk {
> struct virtblk_req {
> struct virtio_blk_outhdr out_hdr;
> u8 status;
> - struct scatterlist sg[];
> + struct sg_table sg_table;
Please keep the sg flexible array member here instead of the pointer
arithmetics that is added instead below.
> + err = sg_alloc_table_chained(&vbr->sg_table,
> + blk_rq_nr_phys_segments(req),
> + vbr->sg_table.sgl,
> + VIRTIO_BLK_INLINE_SG_CNT);
> + if (err)
> + return BLK_STS_RESOURCE;
> +
This will BUG() for requests without segments (fush and discard). You
probably want a separate helper to actually map data in the, extending
the big switch on the op. While we're at it, the blk_mq_start_request
should also move as close as possible to the actual sending of the
request to the host.
You'll also need to select SG_POOL now that you're using these
functions.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
2021-09-01 3:38 ` Feng Li
@ 2021-09-01 10:19 ` Max Gurtovoy
0 siblings, 0 replies; 6+ messages in thread
From: Max Gurtovoy @ 2021-09-01 10:19 UTC (permalink / raw)
To: Feng Li
Cc: hch, mst, virtualization, kvm, stefanha, israelr, nitzanc, oren,
linux-block, Jens Axboe
On 9/1/2021 6:38 AM, Feng Li wrote:
> Does this hurt the performance of virtio-blk?
> I think a fio result is needed here.
No, we use this mechanism in NVMe/NVMf for few years already and didn't
see any performance issues.
Also with the fio tests I run with our NVIDIA's Virtio-blk SNAP devices
showed same perf numbers.
I can add it to v2.
>
> On Tue, Aug 31, 2021 at 7:36 AM Max Gurtovoy <mgurtovoy@nvidia.com> wrote:
>> No need to pre-allocate a big buffer for the IO SGL anymore. If a device
>> has lots of deep queues, preallocation for the sg list can consume
>> substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
>> can be 64 or 128 and each queue's depth might be 128. This means the
>> resulting preallocation for the data SGLs is big.
>>
>> Switch to runtime allocation for SGL for lists longer than 2 entries.
>> This is the approach used by NVMe drivers so it should be reasonable for
>> virtio block as well. Runtime SGL allocation has always been the case
>> for the legacy I/O path so this is nothing new.
>>
>> The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
>> support SG_CHAIN, use only runtime allocation for the SGL.
>>
>> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
>> Reviewed-by: Israel Rukshin <israelr@nvidia.com>
>> ---
>> drivers/block/virtio_blk.c | 37 ++++++++++++++++++++++---------------
>> 1 file changed, 22 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
>> index 77e8468e8593..9a4c5d428b58 100644
>> --- a/drivers/block/virtio_blk.c
>> +++ b/drivers/block/virtio_blk.c
>> @@ -24,6 +24,12 @@
>> /* The maximum number of sg elements that fit into a virtqueue */
>> #define VIRTIO_BLK_MAX_SG_ELEMS 32768
>>
>> +#ifdef CONFIG_ARCH_NO_SG_CHAIN
>> +#define VIRTIO_BLK_INLINE_SG_CNT 0
>> +#else
>> +#define VIRTIO_BLK_INLINE_SG_CNT 2
>> +#endif
>> +
>> static int virtblk_queue_count_set(const char *val,
>> const struct kernel_param *kp)
>> {
>> @@ -99,7 +105,7 @@ struct virtio_blk {
>> struct virtblk_req {
>> struct virtio_blk_outhdr out_hdr;
>> u8 status;
>> - struct scatterlist sg[];
>> + struct sg_table sg_table;
>> };
>>
>> static inline blk_status_t virtblk_result(struct virtblk_req *vbr)
>> @@ -188,6 +194,8 @@ static inline void virtblk_request_done(struct request *req)
>> {
>> struct virtblk_req *vbr = blk_mq_rq_to_pdu(req);
>>
>> + sg_free_table_chained(&vbr->sg_table, VIRTIO_BLK_INLINE_SG_CNT);
>> +
>> if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
>> kfree(page_address(req->special_vec.bv_page) +
>> req->special_vec.bv_offset);
>> @@ -291,7 +299,15 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
>> return BLK_STS_RESOURCE;
>> }
>>
>> - num = blk_rq_map_sg(hctx->queue, req, vbr->sg);
>> + vbr->sg_table.sgl = (struct scatterlist *)(vbr + 1);
>> + err = sg_alloc_table_chained(&vbr->sg_table,
>> + blk_rq_nr_phys_segments(req),
>> + vbr->sg_table.sgl,
>> + VIRTIO_BLK_INLINE_SG_CNT);
>> + if (err)
>> + return BLK_STS_RESOURCE;
>> +
>> + num = blk_rq_map_sg(hctx->queue, req, vbr->sg_table.sgl);
>> if (num) {
>> if (rq_data_dir(req) == WRITE)
>> vbr->out_hdr.type |= cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_OUT);
>> @@ -300,7 +316,7 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
>> }
>>
>> spin_lock_irqsave(&vblk->vqs[qid].lock, flags);
>> - err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg, num);
>> + err = virtblk_add_req(vblk->vqs[qid].vq, vbr, vbr->sg_table.sgl, num);
>> if (err) {
>> virtqueue_kick(vblk->vqs[qid].vq);
>> /* Don't stop the queue if -ENOMEM: we may have failed to
>> @@ -309,6 +325,8 @@ static blk_status_t virtio_queue_rq(struct blk_mq_hw_ctx *hctx,
>> if (err == -ENOSPC)
>> blk_mq_stop_hw_queue(hctx);
>> spin_unlock_irqrestore(&vblk->vqs[qid].lock, flags);
>> + sg_free_table_chained(&vbr->sg_table,
>> + VIRTIO_BLK_INLINE_SG_CNT);
>> switch (err) {
>> case -ENOSPC:
>> return BLK_STS_DEV_RESOURCE;
>> @@ -687,16 +705,6 @@ static const struct attribute_group *virtblk_attr_groups[] = {
>> NULL,
>> };
>>
>> -static int virtblk_init_request(struct blk_mq_tag_set *set, struct request *rq,
>> - unsigned int hctx_idx, unsigned int numa_node)
>> -{
>> - struct virtio_blk *vblk = set->driver_data;
>> - struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq);
>> -
>> - sg_init_table(vbr->sg, vblk->sg_elems);
>> - return 0;
>> -}
>> -
>> static int virtblk_map_queues(struct blk_mq_tag_set *set)
>> {
>> struct virtio_blk *vblk = set->driver_data;
>> @@ -709,7 +717,6 @@ static const struct blk_mq_ops virtio_mq_ops = {
>> .queue_rq = virtio_queue_rq,
>> .commit_rqs = virtio_commit_rqs,
>> .complete = virtblk_request_done,
>> - .init_request = virtblk_init_request,
>> .map_queues = virtblk_map_queues,
>> };
>>
>> @@ -805,7 +812,7 @@ static int virtblk_probe(struct virtio_device *vdev)
>> vblk->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
>> vblk->tag_set.cmd_size =
>> sizeof(struct virtblk_req) +
>> - sizeof(struct scatterlist) * sg_elems;
>> + sizeof(struct scatterlist) * VIRTIO_BLK_INLINE_SG_CNT;
>> vblk->tag_set.driver_data = vblk;
>> vblk->tag_set.nr_hw_queues = vblk->num_vqs;
>>
>> --
>> 2.18.1
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
2021-08-30 23:35 [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data Max Gurtovoy
2021-09-01 3:38 ` Feng Li
2021-09-01 6:18 ` Christoph Hellwig
@ 2021-09-27 11:53 ` Christoph Hellwig
2021-09-27 11:54 ` Christoph Hellwig
2 siblings, 1 reply; 6+ messages in thread
From: Christoph Hellwig @ 2021-09-27 11:53 UTC (permalink / raw)
To: Max Gurtovoy
Cc: hch, mst, virtualization, kvm, stefanha, israelr, nitzanc, oren,
linux-block, axboe
Looks good,
Reviewed-by: Christoph Hellwig <hch@lst.de>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data
2021-09-27 11:53 ` Christoph Hellwig
@ 2021-09-27 11:54 ` Christoph Hellwig
0 siblings, 0 replies; 6+ messages in thread
From: Christoph Hellwig @ 2021-09-27 11:54 UTC (permalink / raw)
To: Max Gurtovoy
Cc: hch, mst, virtualization, kvm, stefanha, israelr, nitzanc, oren,
linux-block, axboe
On Mon, Sep 27, 2021 at 12:53:14PM +0100, Christoph Hellwig wrote:
> Looks good,
>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
Err, sorry. This was supposed to go to the lastest iteration, I'll
add it there.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-09-27 11:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-30 23:35 [PATCH 1/1] virtio-blk: avoid preallocating big SGL for data Max Gurtovoy
2021-09-01 3:38 ` Feng Li
2021-09-01 10:19 ` Max Gurtovoy
2021-09-01 6:18 ` Christoph Hellwig
2021-09-27 11:53 ` Christoph Hellwig
2021-09-27 11:54 ` Christoph Hellwig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).