* nvme double __blk_mq_complete_request() bugs
@ 2020-05-18 4:30 Dongli Zhang
2020-05-18 7:51 ` Sagi Grimberg
0 siblings, 1 reply; 7+ messages in thread
From: Dongli Zhang @ 2020-05-18 4:30 UTC (permalink / raw)
To: linux-nvme; +Cc: linux-block
Hi,
This is to report the below page fault issue for nvme-loop.
[ 235.223975] ==================================================================
[ 235.224878] BUG: KASAN: null-ptr-deref in blk_mq_free_request+0x363/0x510
[ 235.225674] Write of size 4 at addr 0000000000000198 by task swapper/3/0
[ 235.226456]
[ 235.226772] ==================================================================
[ 235.227633] BUG: kernel NULL pointer dereference, address: 0000000000000198
[ 235.228447] #PF: supervisor write access in kernel mode
[ 235.229062] #PF: error_code(0x0002) - not-present page
[ 235.229667] PGD 0 P4D 0
[ 235.229976] Oops: 0002 [#1] SMP KASAN PTI
[ 235.230451] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G B 5.7.0-rc5+ #1
[ 235.231347] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 235.232692] RIP: 0010:blk_mq_free_request+0x367/0x510
[ 235.233286] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
[ 235.235503] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
[ 235.236114] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
[ 235.236941] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
[ 235.237770] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
[ 235.238598] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
[ 235.239424] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
[ 235.240255] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000) knlGS:0000000000000000
[ 235.241192] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 235.241863] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
[ 235.242695] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 235.243523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 235.244349] Call Trace:
[ 235.244645] <IRQ>
[ 235.244890] blk_mq_complete_request+0x266/0x460
[ 235.245432] nvmet_req_complete+0xd/0xb0
[ 235.245898] iomap_dio_bio_end_io+0x336/0x480
[ 235.246409] blk_update_request+0x320/0x960
[ 235.246904] blk_mq_end_request+0x4e/0x4d0
[ 235.247391] blk_mq_complete_request+0x266/0x460
[ 235.247937] virtblk_done+0x164/0x300
[ 235.248372] ? loop_queue_work.cold.44+0x5e/0x5e
[ 235.248915] ? rcu_accelerate_cbs+0x5d/0x1a70
[ 235.249429] ? virtqueue_get_used_addr+0x140/0x140
[ 235.249990] vring_interrupt+0x16d/0x280
[ 235.250454] __handle_irq_event_percpu+0xdd/0x470
[ 235.251010] handle_irq_event_percpu+0x6e/0x130
[ 235.251544] ? rcu_accelerate_cbs_unlocked+0x110/0x110
[ 235.252145] ? __handle_irq_event_percpu+0x470/0x470
[ 235.252729] ? _raw_spin_lock+0x75/0xd0
[ 235.253181] ? _raw_write_lock+0xd0/0xd0
[ 235.253645] handle_irq_event+0xc2/0x158
[ 235.254107] handle_edge_irq+0x1e9/0x7a0
[ 235.254572] do_IRQ+0x94/0x1e0
[ 235.254936] common_interrupt+0xf/0xf
[ 235.255368] </IRQ>
[ 235.255629] RIP: 0010:native_safe_halt+0xe/0x10
[ 235.256162] Code: e9 f2 fe ff ff 48 89 df e8 2f dc f8 fd eb a4 cc cc cc cc cc cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d a4 7d 4a 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 94 7d 4a 00 f4 c3 cc cc 41 56 41 55
[ 235.258314] RSP: 0018:ffff8881f61ffdd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
[ 235.259194] RAX: ffffffff83bc59f0 RBX: dffffc0000000000 RCX: ffffffff83bc6639
[ 235.260022] RDX: 1ffff1103ec398e8 RSI: 0000000000000008 RDI: ffff8881f61cc740
[ 235.260850] RBP: 0000000000000003 R08: ffffed103ec398e9 R09: ffffed103ec398e9
[ 235.261681] R10: ffff8881f61cc747 R11: ffffed103ec398e8 R12: ffffffff84e5c4c0
[ 235.262508] R13: 0000000000000003 R14: 1ffff1103ec3ffc4 R15: 0000000000000000
[ 235.263338] ? __cpuidle_text_start+0x8/0x8
[ 235.263832] ? default_idle_call+0x29/0x60
[ 235.264315] ? tsc_verify_tsc_adjust+0x68/0x1f0
[ 235.264849] default_idle+0x1a/0x2b0
[ 235.265273] do_idle+0x2fd/0x3b0
[ 235.265658] ? arch_cpu_idle_exit+0x40/0x40
[ 235.266151] ? schedule_idle+0x56/0x90
[ 235.266595] cpu_startup_entry+0x14/0x20
[ 235.267057] start_secondary+0x2a6/0x340
[ 235.267522] ? set_cpu_sibling_map+0x1fb0/0x1fb0
[ 235.268066] secondary_startup_64+0xb6/0xc0
[ 235.268561] Modules linked in:
[ 235.268929] CR2: 0000000000000198
[ 235.269330] ---[ end trace f8fa823705a3dbe7 ]---
[ 235.269875] RIP: 0010:blk_mq_free_request+0x367/0x510
[ 235.270466] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
[ 235.272622] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
[ 235.273230] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
[ 235.274063] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
[ 235.274890] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
[ 235.275717] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
[ 235.276545] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
[ 235.277371] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000) knlGS:0000000000000000
[ 235.278307] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 235.278977] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
[ 235.279805] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 235.280632] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 235.281459] Kernel panic - not syncing: Fatal exception in interrupt
[ 235.282474] Kernel Offset: 0x400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 235.283695] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is because of double __blk_mq_complete_request() when resetting nvme-loop.
# echo 1 > /sys/block/nvme1n1/device/nvme1/reset_controller
nvme_loop_queue_response()
-> nvme_end_request()
-> blk_mq_complete_request()
nvme_loop_reset_ctrl_work()
-> nvme_stop_queues(&ctrl->ctrl)
-> blk_mq_tagset_busy_iter(&ctrl->tag_set,
nvme_cancel_request, &ctrl->ctrl);
-> nvme_cancel_request(): state is not MQ_RQ_COMPLETE()
-> blk_mq_complete_request()
-> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
-> __blk_mq_complete_request()
-> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
After code analysis, I think this is for nvme-pci as well.
nvme_process_cq()
-> nvme_handle_cqe()
-> nvme_end_request()
-> blk_mq_complete_request()
nvme_reset_work()
-> nvme_dev_disable()
-> nvme_reap_pending_cqes()
-> nvme_process_cq()
-> nvme_handle_cqe()
-> nvme_end_request()
-> blk_mq_complete_request()
-> __blk_mq_complete_request()
-> __blk_mq_complete_request()
I did not check if nvme-tcp/nvme-fc/nvme-rdma would have the similar issue. Was
there already any fix or discussion for above issue? That is, when resetting
the device, a blk_mq_complete_request() is already in progress.
Thank you very much!
Dongli Zhang
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-18 4:30 nvme double __blk_mq_complete_request() bugs Dongli Zhang
@ 2020-05-18 7:51 ` Sagi Grimberg
2020-05-24 14:33 ` Dongli Zhang
0 siblings, 1 reply; 7+ messages in thread
From: Sagi Grimberg @ 2020-05-18 7:51 UTC (permalink / raw)
To: Dongli Zhang, linux-nvme; +Cc: linux-block
On 5/17/20 9:30 PM, Dongli Zhang wrote:
> Hi,
>
> This is to report the below page fault issue for nvme-loop.
>
> [ 235.223975] ==================================================================
> [ 235.224878] BUG: KASAN: null-ptr-deref in blk_mq_free_request+0x363/0x510
> [ 235.225674] Write of size 4 at addr 0000000000000198 by task swapper/3/0
> [ 235.226456]
> [ 235.226772] ==================================================================
> [ 235.227633] BUG: kernel NULL pointer dereference, address: 0000000000000198
> [ 235.228447] #PF: supervisor write access in kernel mode
> [ 235.229062] #PF: error_code(0x0002) - not-present page
> [ 235.229667] PGD 0 P4D 0
> [ 235.229976] Oops: 0002 [#1] SMP KASAN PTI
> [ 235.230451] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G B 5.7.0-rc5+ #1
> [ 235.231347] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
> [ 235.232692] RIP: 0010:blk_mq_free_request+0x367/0x510
> [ 235.233286] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
> [ 235.235503] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
> [ 235.236114] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
> [ 235.236941] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
> [ 235.237770] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
> [ 235.238598] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
> [ 235.239424] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
> [ 235.240255] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000) knlGS:0000000000000000
> [ 235.241192] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 235.241863] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
> [ 235.242695] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 235.243523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 235.244349] Call Trace:
> [ 235.244645] <IRQ>
> [ 235.244890] blk_mq_complete_request+0x266/0x460
> [ 235.245432] nvmet_req_complete+0xd/0xb0
> [ 235.245898] iomap_dio_bio_end_io+0x336/0x480
> [ 235.246409] blk_update_request+0x320/0x960
> [ 235.246904] blk_mq_end_request+0x4e/0x4d0
> [ 235.247391] blk_mq_complete_request+0x266/0x460
> [ 235.247937] virtblk_done+0x164/0x300
> [ 235.248372] ? loop_queue_work.cold.44+0x5e/0x5e
> [ 235.248915] ? rcu_accelerate_cbs+0x5d/0x1a70
> [ 235.249429] ? virtqueue_get_used_addr+0x140/0x140
> [ 235.249990] vring_interrupt+0x16d/0x280
> [ 235.250454] __handle_irq_event_percpu+0xdd/0x470
> [ 235.251010] handle_irq_event_percpu+0x6e/0x130
> [ 235.251544] ? rcu_accelerate_cbs_unlocked+0x110/0x110
> [ 235.252145] ? __handle_irq_event_percpu+0x470/0x470
> [ 235.252729] ? _raw_spin_lock+0x75/0xd0
> [ 235.253181] ? _raw_write_lock+0xd0/0xd0
> [ 235.253645] handle_irq_event+0xc2/0x158
> [ 235.254107] handle_edge_irq+0x1e9/0x7a0
> [ 235.254572] do_IRQ+0x94/0x1e0
> [ 235.254936] common_interrupt+0xf/0xf
> [ 235.255368] </IRQ>
> [ 235.255629] RIP: 0010:native_safe_halt+0xe/0x10
> [ 235.256162] Code: e9 f2 fe ff ff 48 89 df e8 2f dc f8 fd eb a4 cc cc cc cc cc cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d a4 7d 4a 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 94 7d 4a 00 f4 c3 cc cc 41 56 41 55
> [ 235.258314] RSP: 0018:ffff8881f61ffdd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde
> [ 235.259194] RAX: ffffffff83bc59f0 RBX: dffffc0000000000 RCX: ffffffff83bc6639
> [ 235.260022] RDX: 1ffff1103ec398e8 RSI: 0000000000000008 RDI: ffff8881f61cc740
> [ 235.260850] RBP: 0000000000000003 R08: ffffed103ec398e9 R09: ffffed103ec398e9
> [ 235.261681] R10: ffff8881f61cc747 R11: ffffed103ec398e8 R12: ffffffff84e5c4c0
> [ 235.262508] R13: 0000000000000003 R14: 1ffff1103ec3ffc4 R15: 0000000000000000
> [ 235.263338] ? __cpuidle_text_start+0x8/0x8
> [ 235.263832] ? default_idle_call+0x29/0x60
> [ 235.264315] ? tsc_verify_tsc_adjust+0x68/0x1f0
> [ 235.264849] default_idle+0x1a/0x2b0
> [ 235.265273] do_idle+0x2fd/0x3b0
> [ 235.265658] ? arch_cpu_idle_exit+0x40/0x40
> [ 235.266151] ? schedule_idle+0x56/0x90
> [ 235.266595] cpu_startup_entry+0x14/0x20
> [ 235.267057] start_secondary+0x2a6/0x340
> [ 235.267522] ? set_cpu_sibling_map+0x1fb0/0x1fb0
> [ 235.268066] secondary_startup_64+0xb6/0xc0
> [ 235.268561] Modules linked in:
> [ 235.268929] CR2: 0000000000000198
> [ 235.269330] ---[ end trace f8fa823705a3dbe7 ]---
> [ 235.269875] RIP: 0010:blk_mq_free_request+0x367/0x510
> [ 235.270466] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
> [ 235.272622] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
> [ 235.273230] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
> [ 235.274063] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
> [ 235.274890] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
> [ 235.275717] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
> [ 235.276545] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
> [ 235.277371] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000) knlGS:0000000000000000
> [ 235.278307] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 235.278977] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
> [ 235.279805] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 235.280632] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 235.281459] Kernel panic - not syncing: Fatal exception in interrupt
> [ 235.282474] Kernel Offset: 0x400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
> [ 235.283695] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
>
>
> This is because of double __blk_mq_complete_request() when resetting nvme-loop.
>
> # echo 1 > /sys/block/nvme1n1/device/nvme1/reset_controller
>
>
> nvme_loop_queue_response()
> -> nvme_end_request()
> -> blk_mq_complete_request()
> nvme_loop_reset_ctrl_work()
> -> nvme_stop_queues(&ctrl->ctrl)
> -> blk_mq_tagset_busy_iter(&ctrl->tag_set,
> nvme_cancel_request, &ctrl->ctrl);
> -> nvme_cancel_request(): state is not MQ_RQ_COMPLETE()
> -> blk_mq_complete_request()
> -> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
> -> __blk_mq_complete_request()
> -> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
Yes, your analysis is correct, we should destroy the nvmet_sq before
calling the cancel tag iter..
>
>
>
> After code analysis, I think this is for nvme-pci as well.
>
> nvme_process_cq()
> -> nvme_handle_cqe()
> -> nvme_end_request()
> -> blk_mq_complete_request()
> nvme_reset_work()
> -> nvme_dev_disable()
> -> nvme_reap_pending_cqes()
> -> nvme_process_cq()
> -> nvme_handle_cqe()
> -> nvme_end_request()
> -> blk_mq_complete_request()
> -> __blk_mq_complete_request()
> -> __blk_mq_complete_request()
nvme_dev_disable will first disable the queues before reaping the
pending cqes so
it shouldn't have this issue.
>
>
> I did not check if nvme-tcp/nvme-fc/nvme-rdma would have the similar issue. Was
> there already any fix or discussion for above issue? That is, when resetting
> the device, a blk_mq_complete_request() is already in progress.
Also nvme-tcp and nvme-rdma will stop the transport queues (assuring
there will be no completion
pending) prior to canceling the pending requests. So unless there is a
bug hidden there it shouldn't
happen.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-18 7:51 ` Sagi Grimberg
@ 2020-05-24 14:33 ` Dongli Zhang
2020-05-25 16:45 ` Keith Busch
0 siblings, 1 reply; 7+ messages in thread
From: Dongli Zhang @ 2020-05-24 14:33 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme; +Cc: linux-block
Hi Sagi,
On 5/18/20 12:51 AM, Sagi Grimberg wrote:
>
>
> On 5/17/20 9:30 PM, Dongli Zhang wrote:
>> Hi,
>>
>> This is to report the below page fault issue for nvme-loop.
>>
>> [ 235.223975] ==================================================================
>> [ 235.224878] BUG: KASAN: null-ptr-deref in blk_mq_free_request+0x363/0x510
>> [ 235.225674] Write of size 4 at addr 0000000000000198 by task swapper/3/0
>> [ 235.226456]
>> [ 235.226772] ==================================================================
>> [ 235.227633] BUG: kernel NULL pointer dereference, address: 0000000000000198
>> [ 235.228447] #PF: supervisor write access in kernel mode
>> [ 235.229062] #PF: error_code(0x0002) - not-present page
>> [ 235.229667] PGD 0 P4D 0
>> [ 235.229976] Oops: 0002 [#1] SMP KASAN PTI
>> [ 235.230451] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G B
>> 5.7.0-rc5+ #1
>> [ 235.231347] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
>> rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
>> [ 235.232692] RIP: 0010:blk_mq_free_request+0x367/0x510
>> [ 235.233286] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d
>> ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff
>> 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
>> [ 235.235503] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
>> [ 235.236114] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
>> [ 235.236941] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
>> [ 235.237770] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
>> [ 235.238598] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
>> [ 235.239424] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
>> [ 235.240255] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
>> knlGS:0000000000000000
>> [ 235.241192] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 235.241863] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
>> [ 235.242695] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 235.243523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>> [ 235.244349] Call Trace:
>> [ 235.244645] <IRQ>
>> [ 235.244890] blk_mq_complete_request+0x266/0x460
>> [ 235.245432] nvmet_req_complete+0xd/0xb0
>> [ 235.245898] iomap_dio_bio_end_io+0x336/0x480
>> [ 235.246409] blk_update_request+0x320/0x960
>> [ 235.246904] blk_mq_end_request+0x4e/0x4d0
>> [ 235.247391] blk_mq_complete_request+0x266/0x460
>> [ 235.247937] virtblk_done+0x164/0x300
>> [ 235.248372] ? loop_queue_work.cold.44+0x5e/0x5e
>> [ 235.248915] ? rcu_accelerate_cbs+0x5d/0x1a70
>> [ 235.249429] ? virtqueue_get_used_addr+0x140/0x140
>> [ 235.249990] vring_interrupt+0x16d/0x280
>> [ 235.250454] __handle_irq_event_percpu+0xdd/0x470
>> [ 235.251010] handle_irq_event_percpu+0x6e/0x130
>> [ 235.251544] ? rcu_accelerate_cbs_unlocked+0x110/0x110
>> [ 235.252145] ? __handle_irq_event_percpu+0x470/0x470
>> [ 235.252729] ? _raw_spin_lock+0x75/0xd0
>> [ 235.253181] ? _raw_write_lock+0xd0/0xd0
>> [ 235.253645] handle_irq_event+0xc2/0x158
>> [ 235.254107] handle_edge_irq+0x1e9/0x7a0
>> [ 235.254572] do_IRQ+0x94/0x1e0
>> [ 235.254936] common_interrupt+0xf/0xf
>> [ 235.255368] </IRQ>
>> [ 235.255629] RIP: 0010:native_safe_halt+0xe/0x10
>> [ 235.256162] Code: e9 f2 fe ff ff 48 89 df e8 2f dc f8 fd eb a4 cc cc cc cc
>> cc cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d a4 7d 4a 00 fb f4 <c3> 90
>> e9 07 00 00 00 0f 00 2d 94 7d 4a 00 f4 c3 cc cc 41 56 41 55
>> [ 235.258314] RSP: 0018:ffff8881f61ffdd8 EFLAGS: 00000246 ORIG_RAX:
>> ffffffffffffffde
>> [ 235.259194] RAX: ffffffff83bc59f0 RBX: dffffc0000000000 RCX: ffffffff83bc6639
>> [ 235.260022] RDX: 1ffff1103ec398e8 RSI: 0000000000000008 RDI: ffff8881f61cc740
>> [ 235.260850] RBP: 0000000000000003 R08: ffffed103ec398e9 R09: ffffed103ec398e9
>> [ 235.261681] R10: ffff8881f61cc747 R11: ffffed103ec398e8 R12: ffffffff84e5c4c0
>> [ 235.262508] R13: 0000000000000003 R14: 1ffff1103ec3ffc4 R15: 0000000000000000
>> [ 235.263338] ? __cpuidle_text_start+0x8/0x8
>> [ 235.263832] ? default_idle_call+0x29/0x60
>> [ 235.264315] ? tsc_verify_tsc_adjust+0x68/0x1f0
>> [ 235.264849] default_idle+0x1a/0x2b0
>> [ 235.265273] do_idle+0x2fd/0x3b0
>> [ 235.265658] ? arch_cpu_idle_exit+0x40/0x40
>> [ 235.266151] ? schedule_idle+0x56/0x90
>> [ 235.266595] cpu_startup_entry+0x14/0x20
>> [ 235.267057] start_secondary+0x2a6/0x340
>> [ 235.267522] ? set_cpu_sibling_map+0x1fb0/0x1fb0
>> [ 235.268066] secondary_startup_64+0xb6/0xc0
>> [ 235.268561] Modules linked in:
>> [ 235.268929] CR2: 0000000000000198
>> [ 235.269330] ---[ end trace f8fa823705a3dbe7 ]---
>> [ 235.269875] RIP: 0010:blk_mq_free_request+0x367/0x510
>> [ 235.270466] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d
>> ba 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff
>> 8a 98 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
>> [ 235.272622] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
>> [ 235.273230] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
>> [ 235.274063] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
>> [ 235.274890] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
>> [ 235.275717] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
>> [ 235.276545] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
>> [ 235.277371] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
>> knlGS:0000000000000000
>> [ 235.278307] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 235.278977] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
>> [ 235.279805] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>> [ 235.280632] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>> [ 235.281459] Kernel panic - not syncing: Fatal exception in interrupt
>> [ 235.282474] Kernel Offset: 0x400000 from 0xffffffff81000000 (relocation
>> range: 0xffffffff80000000-0xffffffffbfffffff)
>> [ 235.283695] ---[ end Kernel panic - not syncing: Fatal exception in
>> interrupt ]---
>>
>>
>> This is because of double __blk_mq_complete_request() when resetting nvme-loop.
>>
>> # echo 1 > /sys/block/nvme1n1/device/nvme1/reset_controller
>>
>>
>> nvme_loop_queue_response()
>> -> nvme_end_request()
>> -> blk_mq_complete_request()
>> nvme_loop_reset_ctrl_work()
>> -> nvme_stop_queues(&ctrl->ctrl)
>> -> blk_mq_tagset_busy_iter(&ctrl->tag_set,
>> nvme_cancel_request, &ctrl->ctrl);
>> -> nvme_cancel_request(): state is not MQ_RQ_COMPLETE()
>> -> blk_mq_complete_request()
>> -> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
>> ->
>> __blk_mq_complete_request()
>> ->
>> WRITE_ONCE(rq->state, MQ_RQ_COMPLETE);
>
> Yes, your analysis is correct, we should destroy the nvmet_sq before calling the
> cancel tag iter..
>
>>
>>
>>
>> After code analysis, I think this is for nvme-pci as well.
>>
>> nvme_process_cq()
>> -> nvme_handle_cqe()
>> -> nvme_end_request()
>> -> blk_mq_complete_request()
>> nvme_reset_work()
>> -> nvme_dev_disable()
>> -> nvme_reap_pending_cqes()
>> -> nvme_process_cq()
>> -> nvme_handle_cqe()
>> -> nvme_end_request()
>> -> blk_mq_complete_request()
>> -> __blk_mq_complete_request()
>> -> __blk_mq_complete_request()
>
> nvme_dev_disable will first disable the queues before reaping the pending cqes so
> it shouldn't have this issue.
>
Would you mind help explain how nvme_dev_disable() would avoid this issue?
nvme_dev_disable() would:
1. freeze all the queues so that new request would not enter and submit
2. NOT wait for freezing during live reset so that q->q_usage_counter is not
guaranteed to be zero.
3. quiesce all the queues so that new request would not dispatch
4. delete the queue and free irq
However, I do not find a mechanism to prevent if a nvme_end_request() is already
in progress.
E.g., suppose __blk_mq_complete_request() is already triggered on cpu 3 and
waiting for its first line "WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)" to be
executed ... while another cpu is doing live reset. I do not see how to prevent
such race.
Thank you very much!
Dongli Zhang
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-24 14:33 ` Dongli Zhang
@ 2020-05-25 16:45 ` Keith Busch
2020-05-27 1:04 ` Dongli Zhang
0 siblings, 1 reply; 7+ messages in thread
From: Keith Busch @ 2020-05-25 16:45 UTC (permalink / raw)
To: Dongli Zhang; +Cc: Sagi Grimberg, linux-nvme, linux-block
On Sun, May 24, 2020 at 07:33:02AM -0700, Dongli Zhang wrote:
> >> After code analysis, I think this is for nvme-pci as well.
> >>
> >> nvme_process_cq()
> >> -> nvme_handle_cqe()
> >> -> nvme_end_request()
> >> -> blk_mq_complete_request()
> >> nvme_reset_work()
> >> -> nvme_dev_disable()
> >> -> nvme_reap_pending_cqes()
> >> -> nvme_process_cq()
> >> -> nvme_handle_cqe()
> >> -> nvme_end_request()
> >> -> blk_mq_complete_request()
> >> -> __blk_mq_complete_request()
> >> -> __blk_mq_complete_request()
> >
> > nvme_dev_disable will first disable the queues before reaping the pending cqes so
> > it shouldn't have this issue.
> >
>
> Would you mind help explain how nvme_dev_disable() would avoid this issue?
>
> nvme_dev_disable() would:
>
> 1. freeze all the queues so that new request would not enter and submit
> 2. NOT wait for freezing during live reset so that q->q_usage_counter is not
> guaranteed to be zero.
> 3. quiesce all the queues so that new request would not dispatch
> 4. delete the queue and free irq
>
> However, I do not find a mechanism to prevent if a nvme_end_request() is already
> in progress.
>
> E.g., suppose __blk_mq_complete_request() is already triggered on cpu 3 and
> waiting for its first line "WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)" to be
> executed ... while another cpu is doing live reset. I do not see how to prevent
> such race.
The queues and their interrupts are torn and synchronized down before the reset
reclaims uncompleted requests. There's no other context that can be running
completions at that point.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-25 16:45 ` Keith Busch
@ 2020-05-27 1:04 ` Dongli Zhang
2020-05-27 3:36 ` Keith Busch
2020-05-27 4:14 ` Dongli Zhang
0 siblings, 2 replies; 7+ messages in thread
From: Dongli Zhang @ 2020-05-27 1:04 UTC (permalink / raw)
To: Keith Busch; +Cc: Sagi Grimberg, linux-nvme, linux-block
Hi Keith,
On 5/25/20 9:45 AM, Keith Busch wrote:
> On Sun, May 24, 2020 at 07:33:02AM -0700, Dongli Zhang wrote:
>>>> After code analysis, I think this is for nvme-pci as well.
>>>>
>>>> nvme_process_cq()
>>>> -> nvme_handle_cqe()
>>>> -> nvme_end_request()
>>>> -> blk_mq_complete_request()
>>>> nvme_reset_work()
>>>> -> nvme_dev_disable()
>>>> -> nvme_reap_pending_cqes()
>>>> -> nvme_process_cq()
>>>> -> nvme_handle_cqe()
>>>> -> nvme_end_request()
>>>> -> blk_mq_complete_request()
>>>> -> __blk_mq_complete_request()
>>>> -> __blk_mq_complete_request()
>>>
>>> nvme_dev_disable will first disable the queues before reaping the pending cqes so
>>> it shouldn't have this issue.
>>>
>>
>> Would you mind help explain how nvme_dev_disable() would avoid this issue?
>>
>> nvme_dev_disable() would:
>>
>> 1. freeze all the queues so that new request would not enter and submit
>> 2. NOT wait for freezing during live reset so that q->q_usage_counter is not
>> guaranteed to be zero.
>> 3. quiesce all the queues so that new request would not dispatch
>> 4. delete the queue and free irq
>>
>> However, I do not find a mechanism to prevent if a nvme_end_request() is already
>> in progress.
>>
>> E.g., suppose __blk_mq_complete_request() is already triggered on cpu 3 and
>> waiting for its first line "WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)" to be
>> executed ... while another cpu is doing live reset. I do not see how to prevent
>> such race.
>
> The queues and their interrupts are torn and synchronized down before the reset
> reclaims uncompleted requests. There's no other context that can be running
> completions at that point.
Thank you very much for the clarification.
There are 3 cases for a nvme request to complete.
1. In the context of irq.
While I did not test with source code, I think it is because
nvme_suspend_queue()-->pci_free_irq() which would wait for all infligh IRQ
handler with __synchronize_hardirq().
2. In the context of irq thread when threaded irq is involved.
The nvme_suspend_queue()-->pci_free_irq() would finally wait for the stop of irq
thread by kthread_stop(action->thread). Therefore, there is not any IRQ handler
running in kernel thread.
3. In the context of blk_poll().
I do not find a mechanism to protect the race in this case.
By adding mdelay() to code, I am able to reproduce the below race on purpose.
[ 235.223975] ==================================================================
[ 235.224878] BUG: KASAN: null-ptr-deref in blk_mq_free_request+0x363/0x510
[ 235.225674] Write of size 4 at addr 0000000000000198 by task swapper/3/0
[ 235.226456]
[ 235.226772] ==================================================================
[ 235.227633] BUG: kernel NULL pointer dereference, address: 0000000000000198
[ 235.228447] #PF: supervisor write access in kernel mode
[ 235.229062] #PF: error_code(0x0002) - not-present page
[ 235.229667] PGD 0 P4D 0
[ 235.229976] Oops: 0002 [#1] SMP KASAN PTI
[ 235.230451] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G B
5.7.0-rc5+ #1
[ 235.231347] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 235.232692] RIP: 0010:blk_mq_free_request+0x367/0x510
[ 235.233286] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba
98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98
01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
[ 235.235503] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
[ 235.236114] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
[ 235.236941] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
[ 235.237770] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
[ 235.238598] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
[ 235.239424] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
[ 235.240255] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
knlGS:0000000000000000
[ 235.241192] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 235.241863] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
[ 235.242695] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 235.243523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 235.244349] Call Trace:
[ 235.244645] <IRQ>
[ 235.244890] blk_mq_complete_request+0x266/0x460
[ 235.245432] nvmet_req_complete+0xd/0xb0
[ 235.245898] iomap_dio_bio_end_io+0x336/0x480
[ 235.246409] blk_update_request+0x320/0x960
[ 235.246904] blk_mq_end_request+0x4e/0x4d0
[ 235.247391] blk_mq_complete_request+0x266/0x460
[ 235.247937] virtblk_done+0x164/0x300
[ 235.248372] ? loop_queue_work.cold.44+0x5e/0x5e
[ 235.248915] ? rcu_accelerate_cbs+0x5d/0x1a70
[ 235.249429] ? virtqueue_get_used_addr+0x140/0x140
[ 235.249990] vring_interrupt+0x16d/0x280
[ 235.250454] __handle_irq_event_percpu+0xdd/0x470
[ 235.251010] handle_irq_event_percpu+0x6e/0x130
[ 235.251544] ? rcu_accelerate_cbs_unlocked+0x110/0x110
[ 235.252145] ? __handle_irq_event_percpu+0x470/0x470
[ 235.252729] ? _raw_spin_lock+0x75/0xd0
[ 235.253181] ? _raw_write_lock+0xd0/0xd0
[ 235.253645] handle_irq_event+0xc2/0x158
[ 235.254107] handle_edge_irq+0x1e9/0x7a0
[ 235.254572] do_IRQ+0x94/0x1e0
[ 235.254936] common_interrupt+0xf/0xf
[ 235.255368] </IRQ>
[ 235.255629] RIP: 0010:native_safe_halt+0xe/0x10
[ 235.256162] Code: e9 f2 fe ff ff 48 89 df e8 2f dc f8 fd eb a4 cc cc cc cc cc
cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d a4 7d 4a 00 fb f4 <c3> 90 e9 07
00 00 00 0f 00 2d 94 7d 4a 00 f4 c3 cc cc 41 56 41 55
[ 235.258314] RSP: 0018:ffff8881f61ffdd8 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffffde
[ 235.259194] RAX: ffffffff83bc59f0 RBX: dffffc0000000000 RCX: ffffffff83bc6639
[ 235.260022] RDX: 1ffff1103ec398e8 RSI: 0000000000000008 RDI: ffff8881f61cc740
[ 235.260850] RBP: 0000000000000003 R08: ffffed103ec398e9 R09: ffffed103ec398e9
[ 235.261681] R10: ffff8881f61cc747 R11: ffffed103ec398e8 R12: ffffffff84e5c4c0
[ 235.262508] R13: 0000000000000003 R14: 1ffff1103ec3ffc4 R15: 0000000000000000
[ 235.263338] ? __cpuidle_text_start+0x8/0x8
[ 235.263832] ? default_idle_call+0x29/0x60
[ 235.264315] ? tsc_verify_tsc_adjust+0x68/0x1f0
[ 235.264849] default_idle+0x1a/0x2b0
[ 235.265273] do_idle+0x2fd/0x3b0
[ 235.265658] ? arch_cpu_idle_exit+0x40/0x40
[ 235.266151] ? schedule_idle+0x56/0x90
[ 235.266595] cpu_startup_entry+0x14/0x20
[ 235.267057] start_secondary+0x2a6/0x340
[ 235.267522] ? set_cpu_sibling_map+0x1fb0/0x1fb0
[ 235.268066] secondary_startup_64+0xb6/0xc0
[ 235.268561] Modules linked in:
[ 235.268929] CR2: 0000000000000198
[ 235.269330] ---[ end trace f8fa823705a3dbe7 ]---
[ 235.269875] RIP: 0010:blk_mq_free_request+0x367/0x510
[ 235.270466] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba
98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98
01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
[ 235.272622] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
[ 235.273230] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
[ 235.274063] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
[ 235.274890] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
[ 235.275717] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
[ 235.276545] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
[ 235.277371] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
knlGS:0000000000000000
[ 235.278307] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 235.278977] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
[ 235.279805] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 235.280632] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 235.281459] Kernel panic - not syncing: Fatal exception in interrupt
[ 235.282474] Kernel Offset: 0x400000 from 0xffffffff81000000 (relocation
range: 0xffffffff80000000-0xffffffffbfffffff)
[ 235.283695] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
]---
I have sent the below for feedback.
https://lore.kernel.org/linux-nvme/20200527004955.19463-1-dongli.zhang@oracle.com/T/#u
Thank you very much!
Dongli Zhang
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-27 1:04 ` Dongli Zhang
@ 2020-05-27 3:36 ` Keith Busch
2020-05-27 4:14 ` Dongli Zhang
1 sibling, 0 replies; 7+ messages in thread
From: Keith Busch @ 2020-05-27 3:36 UTC (permalink / raw)
To: Dongli Zhang; +Cc: Sagi Grimberg, linux-nvme, linux-block
On Tue, May 26, 2020 at 06:04:27PM -0700, Dongli Zhang wrote:
> On 5/25/20 9:45 AM, Keith Busch wrote:
> > On Sun, May 24, 2020 at 07:33:02AM -0700, Dongli Zhang wrote:
> 3. In the context of blk_poll().
>
> I do not find a mechanism to protect the race in this case.
>
> By adding mdelay() to code, I am able to reproduce the below race on purpose.
Yeah, there's no other way to synchronize with a potential polling
thread, so locking within the driver looks like the right thing to do
for now.
It'd be great if we could temporarily halt polling while resetting,
though, as that is potentially a lot of wasted cpu cycles if requests
are requeued while the controller resets. But that's a different issue
than what you're addressing.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: nvme double __blk_mq_complete_request() bugs
2020-05-27 1:04 ` Dongli Zhang
2020-05-27 3:36 ` Keith Busch
@ 2020-05-27 4:14 ` Dongli Zhang
1 sibling, 0 replies; 7+ messages in thread
From: Dongli Zhang @ 2020-05-27 4:14 UTC (permalink / raw)
To: Keith Busch; +Cc: Sagi Grimberg, linux-nvme, linux-block
On 5/26/20 6:04 PM, Dongli Zhang wrote:
> Hi Keith,
>
> On 5/25/20 9:45 AM, Keith Busch wrote:
>> On Sun, May 24, 2020 at 07:33:02AM -0700, Dongli Zhang wrote:
>>>>> After code analysis, I think this is for nvme-pci as well.
>>>>>
>>>>> nvme_process_cq()
>>>>> -> nvme_handle_cqe()
>>>>> -> nvme_end_request()
>>>>> -> blk_mq_complete_request()
>>>>> nvme_reset_work()
>>>>> -> nvme_dev_disable()
>>>>> -> nvme_reap_pending_cqes()
>>>>> -> nvme_process_cq()
>>>>> -> nvme_handle_cqe()
>>>>> -> nvme_end_request()
>>>>> -> blk_mq_complete_request()
>>>>> -> __blk_mq_complete_request()
>>>>> -> __blk_mq_complete_request()
>>>>
>>>> nvme_dev_disable will first disable the queues before reaping the pending cqes so
>>>> it shouldn't have this issue.
>>>>
>>>
>>> Would you mind help explain how nvme_dev_disable() would avoid this issue?
>>>
>>> nvme_dev_disable() would:
>>>
>>> 1. freeze all the queues so that new request would not enter and submit
>>> 2. NOT wait for freezing during live reset so that q->q_usage_counter is not
>>> guaranteed to be zero.
>>> 3. quiesce all the queues so that new request would not dispatch
>>> 4. delete the queue and free irq
>>>
>>> However, I do not find a mechanism to prevent if a nvme_end_request() is already
>>> in progress.
>>>
>>> E.g., suppose __blk_mq_complete_request() is already triggered on cpu 3 and
>>> waiting for its first line "WRITE_ONCE(rq->state, MQ_RQ_COMPLETE)" to be
>>> executed ... while another cpu is doing live reset. I do not see how to prevent
>>> such race.
>>
>> The queues and their interrupts are torn and synchronized down before the reset
>> reclaims uncompleted requests. There's no other context that can be running
>> completions at that point.
>
> Thank you very much for the clarification.
>
> There are 3 cases for a nvme request to complete.
>
> 1. In the context of irq.
>
> While I did not test with source code, I think it is because
> nvme_suspend_queue()-->pci_free_irq() which would wait for all infligh IRQ
> handler with __synchronize_hardirq().
>
> 2. In the context of irq thread when threaded irq is involved.
>
> The nvme_suspend_queue()-->pci_free_irq() would finally wait for the stop of irq
> thread by kthread_stop(action->thread). Therefore, there is not any IRQ handler
> running in kernel thread.
>
> 3. In the context of blk_poll().
>
> I do not find a mechanism to protect the race in this case.
>
> By adding mdelay() to code, I am able to reproduce the below race on purpose.
>
>
> [ 235.223975] ==================================================================
> [ 235.224878] BUG: KASAN: null-ptr-deref in blk_mq_free_request+0x363/0x510
> [ 235.225674] Write of size 4 at addr 0000000000000198 by task swapper/3/0
> [ 235.226456]
> [ 235.226772] ==================================================================
> [ 235.227633] BUG: kernel NULL pointer dereference, address: 0000000000000198
> [ 235.228447] #PF: supervisor write access in kernel mode
> [ 235.229062] #PF: error_code(0x0002) - not-present page
> [ 235.229667] PGD 0 P4D 0
> [ 235.229976] Oops: 0002 [#1] SMP KASAN PTI
> [ 235.230451] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G B
> 5.7.0-rc5+ #1
> [ 235.231347] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
> rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
> [ 235.232692] RIP: 0010:blk_mq_free_request+0x367/0x510
> [ 235.233286] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba
> 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98
> 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
> [ 235.235503] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
> [ 235.236114] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
> [ 235.236941] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
> [ 235.237770] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
> [ 235.238598] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
> [ 235.239424] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
> [ 235.240255] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
> knlGS:0000000000000000
> [ 235.241192] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 235.241863] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
> [ 235.242695] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 235.243523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 235.244349] Call Trace:
> [ 235.244645] <IRQ>
> [ 235.244890] blk_mq_complete_request+0x266/0x460
> [ 235.245432] nvmet_req_complete+0xd/0xb0
> [ 235.245898] iomap_dio_bio_end_io+0x336/0x480
> [ 235.246409] blk_update_request+0x320/0x960
> [ 235.246904] blk_mq_end_request+0x4e/0x4d0
> [ 235.247391] blk_mq_complete_request+0x266/0x460
> [ 235.247937] virtblk_done+0x164/0x300
> [ 235.248372] ? loop_queue_work.cold.44+0x5e/0x5e
> [ 235.248915] ? rcu_accelerate_cbs+0x5d/0x1a70
> [ 235.249429] ? virtqueue_get_used_addr+0x140/0x140
> [ 235.249990] vring_interrupt+0x16d/0x280
> [ 235.250454] __handle_irq_event_percpu+0xdd/0x470
> [ 235.251010] handle_irq_event_percpu+0x6e/0x130
> [ 235.251544] ? rcu_accelerate_cbs_unlocked+0x110/0x110
> [ 235.252145] ? __handle_irq_event_percpu+0x470/0x470
> [ 235.252729] ? _raw_spin_lock+0x75/0xd0
> [ 235.253181] ? _raw_write_lock+0xd0/0xd0
> [ 235.253645] handle_irq_event+0xc2/0x158
> [ 235.254107] handle_edge_irq+0x1e9/0x7a0
> [ 235.254572] do_IRQ+0x94/0x1e0
> [ 235.254936] common_interrupt+0xf/0xf
> [ 235.255368] </IRQ>
> [ 235.255629] RIP: 0010:native_safe_halt+0xe/0x10
> [ 235.256162] Code: e9 f2 fe ff ff 48 89 df e8 2f dc f8 fd eb a4 cc cc cc cc cc
> cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d a4 7d 4a 00 fb f4 <c3> 90 e9 07
> 00 00 00 0f 00 2d 94 7d 4a 00 f4 c3 cc cc 41 56 41 55
> [ 235.258314] RSP: 0018:ffff8881f61ffdd8 EFLAGS: 00000246 ORIG_RAX:
> ffffffffffffffde
> [ 235.259194] RAX: ffffffff83bc59f0 RBX: dffffc0000000000 RCX: ffffffff83bc6639
> [ 235.260022] RDX: 1ffff1103ec398e8 RSI: 0000000000000008 RDI: ffff8881f61cc740
> [ 235.260850] RBP: 0000000000000003 R08: ffffed103ec398e9 R09: ffffed103ec398e9
> [ 235.261681] R10: ffff8881f61cc747 R11: ffffed103ec398e8 R12: ffffffff84e5c4c0
> [ 235.262508] R13: 0000000000000003 R14: 1ffff1103ec3ffc4 R15: 0000000000000000
> [ 235.263338] ? __cpuidle_text_start+0x8/0x8
> [ 235.263832] ? default_idle_call+0x29/0x60
> [ 235.264315] ? tsc_verify_tsc_adjust+0x68/0x1f0
> [ 235.264849] default_idle+0x1a/0x2b0
> [ 235.265273] do_idle+0x2fd/0x3b0
> [ 235.265658] ? arch_cpu_idle_exit+0x40/0x40
> [ 235.266151] ? schedule_idle+0x56/0x90
> [ 235.266595] cpu_startup_entry+0x14/0x20
> [ 235.267057] start_secondary+0x2a6/0x340
> [ 235.267522] ? set_cpu_sibling_map+0x1fb0/0x1fb0
> [ 235.268066] secondary_startup_64+0xb6/0xc0
> [ 235.268561] Modules linked in:
> [ 235.268929] CR2: 0000000000000198
> [ 235.269330] ---[ end trace f8fa823705a3dbe7 ]---
> [ 235.269875] RIP: 0010:blk_mq_free_request+0x367/0x510
> [ 235.270466] Code: 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 a2 dc ff ff 48 8d ba
> 98 01 00 00 be 04 00 00 00 48 89 14 24 e8 fd 69 9a ff 48 8b 14 24 <f0> ff 8a 98
> 01 00 00 e9 e2 fe ff ff 48 83 c4 08 48 89 ef be 03 00
> [ 235.272622] RSP: 0018:ffff8881f7389be0 EFLAGS: 00010046
> [ 235.273230] RAX: 0000000000000000 RBX: ffff8881f21b9680 RCX: ffffffff816e05b1
> [ 235.274063] RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000046
> [ 235.274890] RBP: 0000000000000001 R08: fffffbfff0af5869 R09: fffffbfff0af5869
> [ 235.275717] R10: ffffffff857ac347 R11: fffffbfff0af5868 R12: ffff8881f21b969c
> [ 235.276545] R13: ffff8881f0f62738 R14: ffffe8ffffd884c0 R15: ffff8881f21b9698
> [ 235.277371] FS: 0000000000000000(0000) GS:ffff8881f7380000(0000)
> knlGS:0000000000000000
> [ 235.278307] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 235.278977] CR2: 0000000000000198 CR3: 00000001eb886004 CR4: 0000000000360ee0
> [ 235.279805] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 235.280632] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [ 235.281459] Kernel panic - not syncing: Fatal exception in interrupt
> [ 235.282474] Kernel Offset: 0x400000 from 0xffffffff81000000 (relocation
> range: 0xffffffff80000000-0xffffffffbfffffff)
> [ 235.283695] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
> ]---
I copied the wrong callstack for another issue.
Here is the callstack I reproduced for "nvme-pci: avoid race between
nvme_reap_pending_cqes() and nvme_poll()".
[ 432.997264] ------------[ cut here ]------------
[ 432.997265] refcount_t: underflow; use-after-free.
[ 432.997303] WARNING: CPU: 2 PID: 836 at lib/refcount.c:28
refcount_warn_saturate+0xb0/0x150
[ 432.997304] Modules linked in:
[ 432.997313] CPU: 2 PID: 836 Comm: fio Not tainted 5.7.0-rc7+ #22
[ 432.997315] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 432.997320] RIP: 0010:refcount_warn_saturate+0xb0/0x150
[ 432.997323] Code: 4b 84 d9 02 01 e8 ae 8f 4d ff 0f 0b eb d0 80 3d 39 84 d9 02
00 75 c7 48 c7 c7 60 9f 75 b3 c6 05 29 84 d9 02 01 e8 8e 8f 4d ff <0f> 0b eb b0
80 3d 17 84 d9 02 00 75 a7 48 c7 c7 20 a0 75 b3 c6 05
[ 432.997324] RSP: 0018:ffff8881e18173c8 EFLAGS: 00010282
[ 432.997326] RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
[ 432.997327] RDX: 0000000000000002 RSI: 0000000000000007 RDI: ffffffffb4d70de0
[ 432.997328] RBP: ffff8881f08a63d0 R08: ffffed103ee64501 R09: ffffed103ee64501
[ 432.997330] R10: ffff8881f7322803 R11: ffffed103ee64500 R12: ffffe8ffffc00500
[ 432.997331] R13: 0000000000000000 R14: ffff8881f08a6300 R15: ffff8881f589d3c0
[ 432.997333] FS: 00007f2257ba8ec0(0000) GS:ffff8881f7300000(0000)
knlGS:0000000000000000
[ 432.997334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 432.997335] CR2: 00007ffb53b82010 CR3: 00000001f38d6001 CR4: 0000000000360ee0
[ 432.997338] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 432.997339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 432.997340] Call Trace:
[ 432.997349] blk_mq_complete_request+0x135/0x490
[ 432.997353] nvme_poll+0x49a/0xa80
[ 432.997356] blk_poll+0x5b0/0xb90
[ 432.997359] ? blk_mq_alloc_request_hctx+0x310/0x310
[ 432.997361] ? submit_bio+0x97/0x370
[ 432.997362] ? generic_make_request+0x8e0/0x8e0
[ 432.997371] ? unlock_page+0x3a/0x60
[ 432.997374] ? bio_release_pages.part.45+0x165/0x2d0
[ 432.997377] ? memset+0x1f/0x40
[ 432.997380] __blkdev_direct_IO_simple+0x515/0x7d0
[ 432.997384] ? blkdev_write_iter+0x3f0/0x3f0
[ 432.997388] ? __sched_text_start+0x8/0x8
[ 432.997390] ? __switch_to_asm+0x40/0x70
[ 432.997392] ? __switch_to_asm+0x34/0x70
[ 432.997393] ? __switch_to_asm+0x40/0x70
[ 432.997395] ? apic_timer_interrupt+0xa/0x20
[ 432.997399] ? blkdev_iopoll+0x160/0x160
[ 432.997401] ? filemap_check_errors+0x4b/0xd0
[ 432.997403] blkdev_direct_IO+0xdaf/0x1160
[ 432.997404] ? __schedule+0x815/0x16a0
[ 432.997406] ? __sched_text_start+0x8/0x8
[ 432.997410] ? deref_stack_reg+0xab/0xe0
[ 432.997411] ? blkdev_write_end+0x70/0x70
[ 432.997413] ? apic_timer_interrupt+0xa/0x20
[ 432.997414] ? apic_timer_interrupt+0xa/0x20
[ 432.997417] ? bio_release_pages.part.45+0x165/0x2d0
[ 432.997420] generic_file_read_iter+0x251/0x1b70
[ 432.997424] ? _raw_spin_unlock_irq+0x3b/0x60
[ 432.997426] ? __switch_to_asm+0x34/0x70
[ 432.997428] ? __schedule+0x815/0x16a0
[ 432.997429] ? __switch_to_asm+0x34/0x70
[ 432.997431] ? __sched_text_start+0x8/0x8
[ 432.997433] ? pagecache_get_page+0x520/0x520
[ 432.997434] ? apic_timer_interrupt+0xa/0x20
[ 432.997436] ? apic_timer_interrupt+0xa/0x20
[ 432.997437] ? apic_timer_interrupt+0xa/0x20
[ 432.997440] do_iter_readv_writev+0x485/0x6e0
[ 432.997442] ? no_seek_end_llseek_size+0x20/0x20
[ 432.997445] ? security_file_permission+0x19a/0x390
[ 432.997447] do_iter_read+0x1e5/0x590
[ 432.997450] vfs_readv+0xc7/0x130
[ 432.997451] ? __switch_to_asm+0x34/0x70
[ 432.997453] ? compat_rw_copy_check_uvector+0x300/0x300
[ 432.997455] ? __switch_to_asm+0x40/0x70
[ 432.997456] ? __switch_to_asm+0x40/0x70
[ 432.997458] ? __switch_to_asm+0x34/0x70
[ 432.997459] ? __switch_to_asm+0x40/0x70
[ 432.997461] ? __switch_to_asm+0x34/0x70
[ 432.997462] ? __switch_to_asm+0x40/0x70
[ 432.997464] ? _raw_spin_unlock_irq+0x3b/0x60
[ 432.997466] ? apic_timer_interrupt+0xa/0x20
[ 432.997467] ? apic_timer_interrupt+0xa/0x20
[ 432.997470] do_preadv+0x14c/0x1f0
[ 432.997472] ? __ia32_sys_readv+0xa0/0xa0
[ 432.997475] do_syscall_64+0x91/0x330
[ 432.997477] ? prepare_exit_to_usermode+0xfc/0x1d0
[ 432.997479] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 432.997486] RIP: 0033:0x7f2255a55950
[ 432.997488] Code: 66 2e 0f 1f 84 00 00 00 00 00 e8 ab 9d 01 00 41 89 d9 41 89
c7 45 31 c0 4d 89 f2 44 89 ea 4c 89 e6 89 ef b8 47 01 00 00 0f 05 <48> 3d 00 f0
ff ff 77 32 44 89 ff 48 89 44 24 08 e8 db 9d 01 00 48
[ 432.997489] RSP: 002b:00007ffd0051ce10 EFLAGS: 00000246 ORIG_RAX:
0000000000000147
[ 432.997491] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f2255a55950
[ 432.997492] RDX: 0000000000000001 RSI: 000055e73f7f78b0 RDI: 0000000000000003
[ 432.997493] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[ 432.997494] R10: 0000000043ac2000 R11: 0000000000000246 R12: 000055e73f7f78b0
[ 432.997494] R13: 0000000000000001 R14: 0000000043ac2000 R15: 0000000000000000
[ 432.997497] ---[ end trace 276357d6d1512fac ]---
Dongli Zhang
>
>
>
> I have sent the below for feedback.
>
> https://lore.kernel.org/linux-nvme/20200527004955.19463-1-dongli.zhang@oracle.com/T/#u
>
> Thank you very much!
>
> Dongli Zhang
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-05-27 4:14 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-18 4:30 nvme double __blk_mq_complete_request() bugs Dongli Zhang
2020-05-18 7:51 ` Sagi Grimberg
2020-05-24 14:33 ` Dongli Zhang
2020-05-25 16:45 ` Keith Busch
2020-05-27 1:04 ` Dongli Zhang
2020-05-27 3:36 ` Keith Busch
2020-05-27 4:14 ` Dongli Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).