From: Marcel Holtmann <marcel@holtmann.org>
To: Alain Michaud <alainm@chromium.org>
Cc: linux-bluetooth <linux-bluetooth@vger.kernel.org>,
Sonny Sasaka <sonnysasaka@chromium.org>
Subject: Re: [Bluez PATCH] main: adding configurable eir_max_name_len
Date: Tue, 28 Jul 2020 08:58:29 +0200 [thread overview]
Message-ID: <17DA93F5-AB77-4C40-A5F2-38D8FE6C98A3@holtmann.org> (raw)
In-Reply-To: <20200727173720.2700327-1-alainm@chromium.org>
Hi Alain,
> This change adds support for a configurable eir_max_name_len for
> platforms which requires a larger than 48 bytes complete name in EIR.
>
> From bluetoothctl:
> [bluetooth]# system-alias
> 012345678901234567890123456789012345678901234567890123456789
> Changing 012345678901234567890123456789012345678901234567890123456789
> succeeded
> [CHG] Controller DC:71:96:69:02:89 Alias:
> 012345678901234567890123456789012345678901234567890123456789
>
> From btmon:
> < HCI Command: Write Local Name (0x03|0x0013) plen 248 #109
> [hci0] 88.567990
> Name:
> 012345678901234567890123456789012345678901234567890123456789
>> HCI Event: Command Complete (0x0e) plen 4
> #110 [hci0] 88.663854
> Write Local Name (0x03|0x0013) ncmd 1
> Status: Success (0x00)
> @ MGMT Event: Local Name Changed (0x0008) plen 260
> {0x0004} [hci0] 88.663948
> Name:
> 012345678901234567890123456789012345678901234567890123456789
> Short name:
> < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241
> FEC: Not required (0x00)
> Name (complete):
> 012345678901234567890123456789012345678901234567890123456789
> TX power: 12 dBm
> Device ID: Bluetooth SIG assigned (0x0001)
> Vendor: Google (224)
> Product: 0xc405
> Version: 0.5.6 (0x0056)
> 16-bit Service UUIDs (complete): 7 entries
> Generic Access Profile (0x1800)
> Generic Attribute Profile (0x1801)
> Device Information (0x180a)
> A/V Remote Control (0x110e)
> A/V Remote Control Target (0x110c)
> Handsfree Audio Gateway (0x111f)
> Audio Source (0x110a)
>> HCI Event: Command Complete (0x0e) plen 4
> Write Extended Inquiry Response (0x03|0x0052) ncmd 1
> Status: Success (0x00)
>
> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
> Signed-off-by: Alain Michaud <alainm@chromium.org>
> ---
>
> doc/mgmt-api.txt | 1 +
> src/adapter.c | 10 +++++++++-
> src/hcid.h | 1 +
> src/main.c | 5 +++++
> src/main.conf | 5 +++++
> 5 files changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
> index ca0d38469..1bc0f0c12 100644
> --- a/doc/mgmt-api.txt
> +++ b/doc/mgmt-api.txt
> @@ -3279,6 +3279,7 @@ Read Default System Configuration Command
> 0x0019 LE Connection Latency
> 0x001a LE Connection Supervision Timeout
> 0x001b LE Autoconnect Timeout
> + 0x001c Max EIR Name Length
we can certainly do this, but I prefer that do this for LE and BR/EDR and name it that way as well.
>
> This command can be used at any time and will return a list of
> supported default parameters as well as their current value.
> diff --git a/src/adapter.c b/src/adapter.c
> index 5e896a9f0..3adc67b63 100644
> --- a/src/adapter.c
> +++ b/src/adapter.c
> @@ -2375,7 +2375,7 @@ static bool parse_pathloss(DBusMessageIter *value,
> return true;
> }
>
> -static bool parse_transport(DBusMessageIter *value,
> +static bool parse_transport(DBusMessageIter *value,
> struct discovery_filter *filter)
> {
> char *transport_str;
> @@ -4435,6 +4435,14 @@ static void load_default_system_params(struct btd_adapter *adapter)
> len += sizeof(params[i].u16);
> }
>
> + if (main_opts.default_params.eir_max_name_len) {
> + params[i].entry.type = 0x001c;
> + params[i].entry.length = sizeof(params[i].u16);
> + params[i].u16 = main_opts.default_params.eir_max_name_len;
> + ++i;
> + len += sizeof(params[i].u16);
> + }
> +
Do you really want to keep it as uint16_t or is that just laziness since changing the kernel to support anything other than uint16_t is complicated?
On a side note, you need to provide a uint16_t value in little endian to the MGMT wire protocol.
> err = mgmt_send(adapter->mgmt, MGMT_OP_SET_DEF_SYSTEM_CONFIG,
> adapter->dev_id, len, params, NULL, NULL, NULL);
> if (!err)
> diff --git a/src/hcid.h b/src/hcid.h
> index 5f249ebf9..c9b59a374 100644
> --- a/src/hcid.h
> +++ b/src/hcid.h
> @@ -93,6 +93,7 @@ struct main_opts {
> uint16_t le_conn_latency;
> uint16_t le_conn_lsto;
> uint16_t le_autoconnect_timeout;
> + uint16_t eir_max_name_len;
> } default_params;
>
>
> diff --git a/src/main.c b/src/main.c
> index ec7a9fbd7..74876e01d 100644
> --- a/src/main.c
> +++ b/src/main.c
> @@ -123,6 +123,7 @@ static const char *controller_options[] = {
> "LEConnectionLatency",
> "LEConnectionSupervisionTimeout",
> "LEAutoconnecttimeout",
> + "EirMaxNameLength",
> NULL
> };
>
> @@ -433,6 +434,10 @@ static void parse_controller_config(GKeyFile *config)
> &main_opts.default_params.le_autoconnect_timeout,
> 0x0001,
> 0x4000},
> + { "EirMaxNameLength",
> + &main_opts.default_params.eir_max_name_len,
> + 0x0001,
> + 0x00EE},
> };
> uint16_t i;
>
> diff --git a/src/main.conf b/src/main.conf
> index f41203b96..7ecac5930 100644
> --- a/src/main.conf
> +++ b/src/main.conf
> @@ -148,6 +148,11 @@
> #LEConnectionSupervisionTimeout=
> #LEAutoconnecttimeout=
>
> +# EIR Max Name. This is the maximum length for the COMPLETE_NAME EIR section.
> +# If the name length exceeds this size, a SHORT_NAME section is used.
> +# Default: 48
> +#EirMaxNameLength = 48
> +
> [GATT]
> # GATT attribute cache.
> # Possible values:
Regards
Marcel
next prev parent reply other threads:[~2020-07-28 6:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 17:37 [Bluez PATCH] main: adding configurable eir_max_name_len Alain Michaud
2020-07-28 6:58 ` Marcel Holtmann [this message]
2020-07-28 13:10 ` Alain Michaud
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17DA93F5-AB77-4C40-A5F2-38D8FE6C98A3@holtmann.org \
--to=marcel@holtmann.org \
--cc=alainm@chromium.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=sonnysasaka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).