* [PATCH] Bluetooth: Add BT_MODE socket option
@ 2020-03-26 20:22 Luiz Augusto von Dentz
2020-03-27 6:40 ` Marcel Holtmann
0 siblings, 1 reply; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-26 20:22 UTC (permalink / raw)
To: linux-bluetooth
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_MODE socket option which can be used to set L2CAP modes,
including modes only supported over LE which were not supported using
the L2CAP_OPTIONS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/bluetooth.h | 8 ++
net/bluetooth/l2cap_sock.c | 120 +++++++++++++++++++++++++++++-
2 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 1576353a2773..3fa7b1e3c5d9 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,14 @@ struct bt_voice {
#define BT_PHY_LE_CODED_TX 0x00002000
#define BT_PHY_LE_CODED_RX 0x00004000
+#define BT_MODE 15
+
+#define BT_MODE_BASIC 0x00
+#define BT_MODE_ERTM 0x01
+#define BT_MODE_STREAMING 0x02
+#define BT_MODE_LE_FLOWCTL 0x03
+#define BT_MODE_EXT_FLOWCTL 0x04
+
__printf(1, 2)
void bt_info(const char *fmt, ...);
__printf(1, 2)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 117ba20ea194..7c863dc8fe6d 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
return sizeof(struct sockaddr_l2);
}
+static int l2cap_get_mode(struct l2cap_chan *chan)
+{
+ switch (chan->mode) {
+ case L2CAP_MODE_BASIC:
+ return BT_MODE_BASIC;
+ case L2CAP_MODE_ERTM:
+ return BT_MODE_ERTM;
+ case L2CAP_MODE_STREAMING:
+ return BT_MODE_STREAMING;
+ case L2CAP_MODE_LE_FLOWCTL:
+ return BT_MODE_LE_FLOWCTL;
+ case L2CAP_MODE_EXT_FLOWCTL:
+ return BT_MODE_EXT_FLOWCTL;
+ }
+
+ return -EINVAL;
+}
+
static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
char __user *optval, int __user *optlen)
{
@@ -424,6 +442,13 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
break;
}
+ /* L2CAP_MODE_LE_FLOWCTL and L2CAP_MODE_EXT_FLOWCTL are not
+ * supported by L2CAP_OPTIONS.
+ */
+ if (chan->mode == L2CAP_MODE_LE_FLOWCTL ||
+ chan->mode == L2CAP_MODE_EXT_FLOWCTL)
+ return -EINVAL;
+
memset(&opts, 0, sizeof(opts));
opts.imtu = chan->imtu;
opts.omtu = chan->omtu;
@@ -508,7 +533,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
struct bt_security sec;
struct bt_power pwr;
u32 phys;
- int len, err = 0;
+ int len, mode, err = 0;
BT_DBG("sk %p", sk);
@@ -624,6 +649,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
err = -EFAULT;
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ mode = l2cap_get_mode(chan);
+ if (mode < 0) {
+ err = mode;
+ break;
+ }
+
+ if (put_user(mode, (u8 __user *) optval))
+ err = -EFAULT;
+ break;
+
default:
err = -ENOPROTOOPT;
break;
@@ -763,6 +809,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
return err;
}
+static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
+{
+ switch (mode) {
+ case BT_MODE_BASIC:
+ if (bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_BASIC;
+ clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
+ break;
+ case BT_MODE_ERTM:
+ if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_ERTM;
+ break;
+ case BT_MODE_STREAMING:
+ if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_STREAMING;
+ break;
+ case BT_MODE_LE_FLOWCTL:
+ if (!bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_LE_FLOWCTL;
+ break;
+ case BT_MODE_EXT_FLOWCTL:
+ /* TODO: Add support for ECRED PDUs to BR/EDR */
+ if (!bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_EXT_FLOWCTL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ chan->mode = mode;
+
+ return 0;
+}
+
static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, unsigned int optlen)
{
@@ -968,6 +1053,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ BT_DBG("sk->sk_state %u", sk->sk_state);
+
+ if (sk->sk_state != BT_BOUND) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (get_user(opt, (u8 __user *) optval)) {
+ err = -EFAULT;
+ break;
+ }
+
+ BT_DBG("opt %u", opt);
+
+ err = l2cap_set_mode(chan, opt);
+ if (err)
+ break;
+
+ BT_DBG("mode 0x%2.2x", chan->mode);
+
+ break;
+
default:
err = -ENOPROTOOPT;
break;
--
2.21.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] Bluetooth: Add BT_MODE socket option
2020-03-26 20:22 [PATCH] Bluetooth: Add BT_MODE socket option Luiz Augusto von Dentz
@ 2020-03-27 6:40 ` Marcel Holtmann
2020-03-27 18:04 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2020-03-27 6:40 UTC (permalink / raw)
To: Luiz Augusto von Dentz; +Cc: linux-bluetooth
Hi Luiz,
> This adds BT_MODE socket option which can be used to set L2CAP modes,
> including modes only supported over LE which were not supported using
> the L2CAP_OPTIONS.
>
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> ---
> include/net/bluetooth/bluetooth.h | 8 ++
> net/bluetooth/l2cap_sock.c | 120 +++++++++++++++++++++++++++++-
> 2 files changed, 127 insertions(+), 1 deletion(-)
>
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 1576353a2773..3fa7b1e3c5d9 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -139,6 +139,14 @@ struct bt_voice {
> #define BT_PHY_LE_CODED_TX 0x00002000
> #define BT_PHY_LE_CODED_RX 0x00004000
>
> +#define BT_MODE 15
> +
> +#define BT_MODE_BASIC 0x00
> +#define BT_MODE_ERTM 0x01
> +#define BT_MODE_STREAMING 0x02
> +#define BT_MODE_LE_FLOWCTL 0x03
> +#define BT_MODE_EXT_FLOWCTL 0x04
> +
> __printf(1, 2)
> void bt_info(const char *fmt, ...);
> __printf(1, 2)
> diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> index 117ba20ea194..7c863dc8fe6d 100644
> --- a/net/bluetooth/l2cap_sock.c
> +++ b/net/bluetooth/l2cap_sock.c
> @@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
> return sizeof(struct sockaddr_l2);
> }
>
> +static int l2cap_get_mode(struct l2cap_chan *chan)
> +{
> + switch (chan->mode) {
> + case L2CAP_MODE_BASIC:
> + return BT_MODE_BASIC;
> + case L2CAP_MODE_ERTM:
> + return BT_MODE_ERTM;
> + case L2CAP_MODE_STREAMING:
> + return BT_MODE_STREAMING;
> + case L2CAP_MODE_LE_FLOWCTL:
> + return BT_MODE_LE_FLOWCTL;
> + case L2CAP_MODE_EXT_FLOWCTL:
> + return BT_MODE_EXT_FLOWCTL;
> + }
> +
> + return -EINVAL;
> +}
> +
> static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> char __user *optval, int __user *optlen)
> {
> @@ -424,6 +442,13 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> break;
> }
>
> + /* L2CAP_MODE_LE_FLOWCTL and L2CAP_MODE_EXT_FLOWCTL are not
> + * supported by L2CAP_OPTIONS.
> + */
> + if (chan->mode == L2CAP_MODE_LE_FLOWCTL ||
> + chan->mode == L2CAP_MODE_EXT_FLOWCTL)
> + return -EINVAL;
> +
I might have done a positive check here.
switch (chan->mode) {
case L2CAP_MODE_BASIC:
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
break;
default:
return -EINVAL;
}
Anyhow, I also realized that in l2cap_sock_setsockopt_old we are allowing L2CAP_MODE_LE_FLOWCTL. I think we want to make that one return EINVAL as well. However that should be a separate patch just in case we need to revert it.
That said, I would leave L2CAP_MODE_LE_FLOWCTL in here initially and then remove it with the same patch that removes it from setsockopt_old. Lets check our userspace first if it handles this all correctly for LE connections (not that L2CAP LE connection oriented channels are used much).
> memset(&opts, 0, sizeof(opts));
> opts.imtu = chan->imtu;
> opts.omtu = chan->omtu;
> @@ -508,7 +533,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> struct bt_security sec;
> struct bt_power pwr;
> u32 phys;
> - int len, err = 0;
> + int len, mode, err = 0;
>
> BT_DBG("sk %p", sk);
>
> @@ -624,6 +649,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> err = -EFAULT;
> break;
>
> + case BT_MODE:
> + if (!enable_ecred) {
> + err = -ENOPROTOOPT;
> + break;
> + }
> +
> + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> + err = -EINVAL;
> + break;
> + }
> +
> + mode = l2cap_get_mode(chan);
> + if (mode < 0) {
> + err = mode;
> + break;
> + }
> +
> + if (put_user(mode, (u8 __user *) optval))
> + err = -EFAULT;
> + break;
> +
> default:
> err = -ENOPROTOOPT;
> break;
> @@ -763,6 +809,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
> return err;
> }
>
> +static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
> +{
> + switch (mode) {
> + case BT_MODE_BASIC:
> + if (bdaddr_type_is_le(chan->src_type))
> + return -EINVAL;
> + mode = L2CAP_MODE_BASIC;
> + clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
> + break;
> + case BT_MODE_ERTM:
> + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> + return -EINVAL;
> + mode = L2CAP_MODE_ERTM;
> + break;
> + case BT_MODE_STREAMING:
> + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> + return -EINVAL;
> + mode = L2CAP_MODE_STREAMING;
> + break;
> + case BT_MODE_LE_FLOWCTL:
> + if (!bdaddr_type_is_le(chan->src_type))
> + return -EINVAL;
> + mode = L2CAP_MODE_LE_FLOWCTL;
> + break;
> + case BT_MODE_EXT_FLOWCTL:
> + /* TODO: Add support for ECRED PDUs to BR/EDR */
> + if (!bdaddr_type_is_le(chan->src_type))
> + return -EINVAL;
> + mode = L2CAP_MODE_EXT_FLOWCTL;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + chan->mode = mode;
> +
> + return 0;
> +}
> +
> static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
> char __user *optval, unsigned int optlen)
> {
> @@ -968,6 +1053,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
>
> break;
>
> + case BT_MODE:
> + if (!enable_ecred) {
> + err = -ENOPROTOOPT;
> + break;
> + }
> +
> + BT_DBG("sk->sk_state %u", sk->sk_state);
> +
> + if (sk->sk_state != BT_BOUND) {
> + err = -EINVAL;
> + break;
> + }
> +
> + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> + err = -EINVAL;
> + break;
> + }
> +
> + if (get_user(opt, (u8 __user *) optval)) {
> + err = -EFAULT;
> + break;
> + }
> +
> + BT_DBG("opt %u", opt);
> +
> + err = l2cap_set_mode(chan, opt);
> + if (err)
> + break;
> +
> + BT_DBG("mode 0x%2.2x", chan->mode);
> +
> + break;
> +
> default:
> err = -ENOPROTOOPT;
> break;
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] Bluetooth: Add BT_MODE socket option
2020-03-27 6:40 ` Marcel Holtmann
@ 2020-03-27 18:04 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-27 18:04 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth
Hi Marcel,
On Thu, Mar 26, 2020 at 11:40 PM Marcel Holtmann <marcel@holtmann.org> wrote:
>
> Hi Luiz,
>
> > This adds BT_MODE socket option which can be used to set L2CAP modes,
> > including modes only supported over LE which were not supported using
> > the L2CAP_OPTIONS.
> >
> > Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> > ---
> > include/net/bluetooth/bluetooth.h | 8 ++
> > net/bluetooth/l2cap_sock.c | 120 +++++++++++++++++++++++++++++-
> > 2 files changed, 127 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> > index 1576353a2773..3fa7b1e3c5d9 100644
> > --- a/include/net/bluetooth/bluetooth.h
> > +++ b/include/net/bluetooth/bluetooth.h
> > @@ -139,6 +139,14 @@ struct bt_voice {
> > #define BT_PHY_LE_CODED_TX 0x00002000
> > #define BT_PHY_LE_CODED_RX 0x00004000
> >
> > +#define BT_MODE 15
> > +
> > +#define BT_MODE_BASIC 0x00
> > +#define BT_MODE_ERTM 0x01
> > +#define BT_MODE_STREAMING 0x02
> > +#define BT_MODE_LE_FLOWCTL 0x03
> > +#define BT_MODE_EXT_FLOWCTL 0x04
> > +
>
> > __printf(1, 2)
> > void bt_info(const char *fmt, ...);
> > __printf(1, 2)
> > diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> > index 117ba20ea194..7c863dc8fe6d 100644
> > --- a/net/bluetooth/l2cap_sock.c
> > +++ b/net/bluetooth/l2cap_sock.c
> > @@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
> > return sizeof(struct sockaddr_l2);
> > }
> >
> > +static int l2cap_get_mode(struct l2cap_chan *chan)
> > +{
> > + switch (chan->mode) {
> > + case L2CAP_MODE_BASIC:
> > + return BT_MODE_BASIC;
> > + case L2CAP_MODE_ERTM:
> > + return BT_MODE_ERTM;
> > + case L2CAP_MODE_STREAMING:
> > + return BT_MODE_STREAMING;
> > + case L2CAP_MODE_LE_FLOWCTL:
> > + return BT_MODE_LE_FLOWCTL;
> > + case L2CAP_MODE_EXT_FLOWCTL:
> > + return BT_MODE_EXT_FLOWCTL;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> > char __user *optval, int __user *optlen)
> > {
> > @@ -424,6 +442,13 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> > break;
> > }
> >
> > + /* L2CAP_MODE_LE_FLOWCTL and L2CAP_MODE_EXT_FLOWCTL are not
> > + * supported by L2CAP_OPTIONS.
> > + */
> > + if (chan->mode == L2CAP_MODE_LE_FLOWCTL ||
> > + chan->mode == L2CAP_MODE_EXT_FLOWCTL)
> > + return -EINVAL;
> > +
>
> I might have done a positive check here.
Right, that means any new mode we introduced is not automatically
handled, got it.
> switch (chan->mode) {
> case L2CAP_MODE_BASIC:
> case L2CAP_MODE_ERTM:
> case L2CAP_MODE_STREAMING:
> break;
> default:
> return -EINVAL;
> }
>
> Anyhow, I also realized that in l2cap_sock_setsockopt_old we are allowing L2CAP_MODE_LE_FLOWCTL. I think we want to make that one return EINVAL as well. However that should be a separate patch just in case we need to revert it.
Yep, previously it did not validate the mode being set, which indeed
seems to be a bug.
> That said, I would leave L2CAP_MODE_LE_FLOWCTL in here initially and then remove it with the same patch that removes it from setsockopt_old. Lets check our userspace first if it handles this all correctly for LE connections (not that L2CAP LE connection oriented channels are used much).
Actually there is a check preventing L2CAP_OPTIONS to work with LE
addresses, so applications should not be able to use it in that case,
except for BR/EDR though I would consider that to be a bug since
L2CAP_MODE_LE_FLOWCTL obviously should not work in that case.
> > memset(&opts, 0, sizeof(opts));
> > opts.imtu = chan->imtu;
> > opts.omtu = chan->omtu;
> > @@ -508,7 +533,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> > struct bt_security sec;
> > struct bt_power pwr;
> > u32 phys;
> > - int len, err = 0;
> > + int len, mode, err = 0;
> >
> > BT_DBG("sk %p", sk);
> >
> > @@ -624,6 +649,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> > err = -EFAULT;
> > break;
> >
> > + case BT_MODE:
> > + if (!enable_ecred) {
> > + err = -ENOPROTOOPT;
> > + break;
> > + }
> > +
> > + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + mode = l2cap_get_mode(chan);
> > + if (mode < 0) {
> > + err = mode;
> > + break;
> > + }
> > +
> > + if (put_user(mode, (u8 __user *) optval))
> > + err = -EFAULT;
> > + break;
> > +
> > default:
> > err = -ENOPROTOOPT;
> > break;
> > @@ -763,6 +809,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
> > return err;
> > }
> >
> > +static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
> > +{
> > + switch (mode) {
> > + case BT_MODE_BASIC:
> > + if (bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_BASIC;
> > + clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
> > + break;
> > + case BT_MODE_ERTM:
> > + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_ERTM;
> > + break;
> > + case BT_MODE_STREAMING:
> > + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_STREAMING;
> > + break;
> > + case BT_MODE_LE_FLOWCTL:
> > + if (!bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_LE_FLOWCTL;
> > + break;
> > + case BT_MODE_EXT_FLOWCTL:
> > + /* TODO: Add support for ECRED PDUs to BR/EDR */
> > + if (!bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_EXT_FLOWCTL;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + chan->mode = mode;
> > +
> > + return 0;
> > +}
> > +
> > static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
> > char __user *optval, unsigned int optlen)
> > {
> > @@ -968,6 +1053,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
> >
> > break;
> >
> > + case BT_MODE:
> > + if (!enable_ecred) {
> > + err = -ENOPROTOOPT;
> > + break;
> > + }
> > +
> > + BT_DBG("sk->sk_state %u", sk->sk_state);
> > +
> > + if (sk->sk_state != BT_BOUND) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + if (get_user(opt, (u8 __user *) optval)) {
> > + err = -EFAULT;
> > + break;
> > + }
> > +
> > + BT_DBG("opt %u", opt);
> > +
> > + err = l2cap_set_mode(chan, opt);
> > + if (err)
> > + break;
> > +
> > + BT_DBG("mode 0x%2.2x", chan->mode);
> > +
> > + break;
> > +
> > default:
> > err = -ENOPROTOOPT;
> > break;
>
> Regards
>
> Marcel
>
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] Bluetooth: Add BT_MODE socket option
@ 2020-03-27 18:32 Luiz Augusto von Dentz
0 siblings, 0 replies; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2020-03-27 18:32 UTC (permalink / raw)
To: linux-bluetooth
From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_MODE socket option which can be used to set L2CAP modes,
including modes only supported over LE which were not supported using
the L2CAP_OPTIONS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
include/net/bluetooth/bluetooth.h | 8 ++
net/bluetooth/l2cap_sock.c | 120 +++++++++++++++++++++++++++++-
2 files changed, 127 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 1576353a2773..3fa7b1e3c5d9 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,14 @@ struct bt_voice {
#define BT_PHY_LE_CODED_TX 0x00002000
#define BT_PHY_LE_CODED_RX 0x00004000
+#define BT_MODE 15
+
+#define BT_MODE_BASIC 0x00
+#define BT_MODE_ERTM 0x01
+#define BT_MODE_STREAMING 0x02
+#define BT_MODE_LE_FLOWCTL 0x03
+#define BT_MODE_EXT_FLOWCTL 0x04
+
__printf(1, 2)
void bt_info(const char *fmt, ...);
__printf(1, 2)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 117ba20ea194..7c863dc8fe6d 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
return sizeof(struct sockaddr_l2);
}
+static int l2cap_get_mode(struct l2cap_chan *chan)
+{
+ switch (chan->mode) {
+ case L2CAP_MODE_BASIC:
+ return BT_MODE_BASIC;
+ case L2CAP_MODE_ERTM:
+ return BT_MODE_ERTM;
+ case L2CAP_MODE_STREAMING:
+ return BT_MODE_STREAMING;
+ case L2CAP_MODE_LE_FLOWCTL:
+ return BT_MODE_LE_FLOWCTL;
+ case L2CAP_MODE_EXT_FLOWCTL:
+ return BT_MODE_EXT_FLOWCTL;
+ }
+
+ return -EINVAL;
+}
+
static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
char __user *optval, int __user *optlen)
{
@@ -424,6 +442,13 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
break;
}
+ /* L2CAP_MODE_LE_FLOWCTL and L2CAP_MODE_EXT_FLOWCTL are not
+ * supported by L2CAP_OPTIONS.
+ */
+ if (chan->mode == L2CAP_MODE_LE_FLOWCTL ||
+ chan->mode == L2CAP_MODE_EXT_FLOWCTL)
+ return -EINVAL;
+
memset(&opts, 0, sizeof(opts));
opts.imtu = chan->imtu;
opts.omtu = chan->omtu;
@@ -508,7 +533,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
struct bt_security sec;
struct bt_power pwr;
u32 phys;
- int len, err = 0;
+ int len, mode, err = 0;
BT_DBG("sk %p", sk);
@@ -624,6 +649,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
err = -EFAULT;
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ mode = l2cap_get_mode(chan);
+ if (mode < 0) {
+ err = mode;
+ break;
+ }
+
+ if (put_user(mode, (u8 __user *) optval))
+ err = -EFAULT;
+ break;
+
default:
err = -ENOPROTOOPT;
break;
@@ -763,6 +809,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
return err;
}
+static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
+{
+ switch (mode) {
+ case BT_MODE_BASIC:
+ if (bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_BASIC;
+ clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
+ break;
+ case BT_MODE_ERTM:
+ if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_ERTM;
+ break;
+ case BT_MODE_STREAMING:
+ if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_STREAMING;
+ break;
+ case BT_MODE_LE_FLOWCTL:
+ if (!bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_LE_FLOWCTL;
+ break;
+ case BT_MODE_EXT_FLOWCTL:
+ /* TODO: Add support for ECRED PDUs to BR/EDR */
+ if (!bdaddr_type_is_le(chan->src_type))
+ return -EINVAL;
+ mode = L2CAP_MODE_EXT_FLOWCTL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ chan->mode = mode;
+
+ return 0;
+}
+
static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, unsigned int optlen)
{
@@ -968,6 +1053,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
break;
+ case BT_MODE:
+ if (!enable_ecred) {
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ BT_DBG("sk->sk_state %u", sk->sk_state);
+
+ if (sk->sk_state != BT_BOUND) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+ err = -EINVAL;
+ break;
+ }
+
+ if (get_user(opt, (u8 __user *) optval)) {
+ err = -EFAULT;
+ break;
+ }
+
+ BT_DBG("opt %u", opt);
+
+ err = l2cap_set_mode(chan, opt);
+ if (err)
+ break;
+
+ BT_DBG("mode 0x%2.2x", chan->mode);
+
+ break;
+
default:
err = -ENOPROTOOPT;
break;
--
2.21.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-27 18:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-26 20:22 [PATCH] Bluetooth: Add BT_MODE socket option Luiz Augusto von Dentz
2020-03-27 6:40 ` Marcel Holtmann
2020-03-27 18:04 ` Luiz Augusto von Dentz
2020-03-27 18:32 Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).