* [PATCH AUTOSEL 4.4 28/31] Bluetooth: Fix the HCI to MGMT status conversion table
[not found] <20210706112931.2066397-1-sashal@kernel.org>
@ 2021-07-06 11:29 ` Sasha Levin
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 29/31] Bluetooth: Shutdown controller after workqueues are flushed or cancelled Sasha Levin
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 30/31] Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-07-06 11:29 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yu Liu, Miao-chen Chou, Marcel Holtmann, Sasha Levin,
linux-bluetooth, netdev
From: Yu Liu <yudiliu@google.com>
[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]
0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/mgmt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ee761fb09559..4a95c89d8506 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -212,12 +212,15 @@ static u8 mgmt_status_table[] = {
MGMT_STATUS_TIMEOUT, /* Instant Passed */
MGMT_STATUS_NOT_SUPPORTED, /* Pairing Not Supported */
MGMT_STATUS_FAILED, /* Transaction Collision */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_INVALID_PARAMS, /* Unacceptable Parameter */
MGMT_STATUS_REJECTED, /* QoS Rejected */
MGMT_STATUS_NOT_SUPPORTED, /* Classification Not Supported */
MGMT_STATUS_REJECTED, /* Insufficient Security */
MGMT_STATUS_INVALID_PARAMS, /* Parameter Out Of Range */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_BUSY, /* Role Switch Pending */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_FAILED, /* Slot Violation */
MGMT_STATUS_FAILED, /* Role Switch Failed */
MGMT_STATUS_INVALID_PARAMS, /* EIR Too Large */
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH AUTOSEL 4.4 29/31] Bluetooth: Shutdown controller after workqueues are flushed or cancelled
[not found] <20210706112931.2066397-1-sashal@kernel.org>
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 28/31] Bluetooth: Fix the HCI to MGMT status conversion table Sasha Levin
@ 2021-07-06 11:29 ` Sasha Levin
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 30/31] Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-07-06 11:29 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kai-Heng Feng, Marcel Holtmann, Sasha Levin, linux-bluetooth, netdev
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 545.660350] usb 3-10: device descriptor read/64, error -110
[ 561.283530] usb 3-10: device descriptor read/64, error -110
[ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865] ? skb_release_head_state+0x5e/0x80
[ 2048.663873] kfree_skb+0x2f/0xb0
[ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954] ? __cond_resched+0x1a/0x50
[ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007] rfkill_set_block+0x98/0x170
[ 2048.664016] rfkill_fop_write+0x136/0x1e0
[ 2048.664022] vfs_write+0xc7/0x260
[ 2048.664030] ksys_write+0xb1/0xe0
[ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042] __x64_sys_write+0x1a/0x20
[ 2048.664048] do_syscall_64+0x40/0xb0
[ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff
So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/hci_core.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 041e719543fe..c478924198d5 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1666,14 +1666,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
BT_DBG("%s %p", hdev->name, hdev);
- if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
- !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
- test_bit(HCI_UP, &hdev->flags)) {
- /* Execute vendor specific shutdown routine */
- if (hdev->shutdown)
- hdev->shutdown(hdev);
- }
-
cancel_delayed_work(&hdev->power_off);
hci_req_cancel(hdev, ENODEV);
@@ -1746,6 +1738,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
clear_bit(HCI_INIT, &hdev->flags);
}
+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ test_bit(HCI_UP, &hdev->flags)) {
+ /* Execute vendor specific shutdown routine */
+ if (hdev->shutdown)
+ hdev->shutdown(hdev);
+ }
+
/* flush cmd work */
flush_work(&hdev->cmd_work);
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH AUTOSEL 4.4 30/31] Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
[not found] <20210706112931.2066397-1-sashal@kernel.org>
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 28/31] Bluetooth: Fix the HCI to MGMT status conversion table Sasha Levin
2021-07-06 11:29 ` [PATCH AUTOSEL 4.4 29/31] Bluetooth: Shutdown controller after workqueues are flushed or cancelled Sasha Levin
@ 2021-07-06 11:29 ` Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-07-06 11:29 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tim Jiang, Marcel Holtmann, Sasha Levin, linux-bluetooth
From: Tim Jiang <tjiang@codeaurora.org>
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]
This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.
Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7039a58a6a4e..3d62f17111cb 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2555,6 +2555,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
sent += size;
count -= size;
+ /* ep2 need time to switch from function acl to function dfu,
+ * so we add 20ms delay here.
+ */
+ msleep(20);
+
while (count) {
size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread