* [PATCH BlueZ v2 1/4] mesh: use static node_comp instead of the pointer
2020-01-30 14:34 [PATCH BlueZ v2 0/4] Allow to reattach with new composition data Jakub Witowski
@ 2020-01-30 14:34 ` Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 2/4] mesh: add cid/pid/vid setter Jakub Witowski
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jakub Witowski @ 2020-01-30 14:34 UTC (permalink / raw)
To: linux-bluetooth
There is no need to use the pointer to the node_comp data.
This pach uses static node_comp instead.
---
mesh/node.c | 56 +++++++++++++++++++++++------------------------------
1 file changed, 24 insertions(+), 32 deletions(-)
diff --git a/mesh/node.c b/mesh/node.c
index de6e74c4f..6fe70742d 100644
--- a/mesh/node.c
+++ b/mesh/node.c
@@ -90,7 +90,7 @@ struct mesh_node {
uint32_t seq_number;
bool provisioner;
uint16_t primary;
- struct node_composition *comp;
+ struct node_composition comp;
struct {
uint16_t interval;
uint8_t cnt;
@@ -336,7 +336,6 @@ static void free_node_resources(void *data)
free_node_dbus_resources(node);
mesh_net_free(node->net);
- l_free(node->comp);
l_free(node->storage_dir);
l_free(node);
}
@@ -503,11 +502,10 @@ static bool init_from_storage(struct mesh_config_node *db_node,
l_queue_push_tail(nodes, node);
- node->comp = l_new(struct node_composition, 1);
- node->comp->cid = db_node->cid;
- node->comp->pid = db_node->pid;
- node->comp->vid = db_node->vid;
- node->comp->crpl = db_node->crpl;
+ node->comp.cid = db_node->cid;
+ node->comp.pid = db_node->pid;
+ node->comp.vid = db_node->vid;
+ node->comp.crpl = db_node->crpl;
node->lpn = db_node->modes.lpn;
node->proxy = db_node->modes.proxy;
@@ -753,7 +751,7 @@ uint16_t node_get_crpl(struct mesh_node *node)
if (!node)
return 0;
- return node->comp->crpl;
+ return node->comp.crpl;
}
uint8_t node_relay_mode_get(struct mesh_node *node, uint8_t *count,
@@ -886,18 +884,18 @@ uint16_t node_generate_comp(struct mesh_node *node, uint8_t *buf, uint16_t sz)
uint16_t num_ele = 0;
const struct l_queue_entry *ele_entry;
- if (!node || !node->comp || sz < MIN_COMP_SIZE)
+ if (!node || sz < MIN_COMP_SIZE)
return 0;
n = 0;
- l_put_le16(node->comp->cid, buf + n);
+ l_put_le16(node->comp.cid, buf + n);
n += 2;
- l_put_le16(node->comp->pid, buf + n);
+ l_put_le16(node->comp.pid, buf + n);
n += 2;
- l_put_le16(node->comp->vid, buf + n);
+ l_put_le16(node->comp.vid, buf + n);
n += 2;
- l_put_le16(node->comp->crpl, buf + n);
+ l_put_le16(node->comp.crpl, buf + n);
n += 2;
features = 0;
@@ -1198,10 +1196,10 @@ static void convert_node_to_storage(struct mesh_node *node,
{
const struct l_queue_entry *entry;
- db_node->cid = node->comp->cid;
- db_node->pid = node->comp->pid;
- db_node->vid = node->comp->vid;
- db_node->crpl = node->comp->crpl;
+ db_node->cid = node->comp.cid;
+ db_node->pid = node->comp.pid;
+ db_node->vid = node->comp.vid;
+ db_node->crpl = node->comp.crpl;
db_node->modes.lpn = node->lpn;
db_node->modes.proxy = node->proxy;
@@ -1285,29 +1283,28 @@ static bool get_app_properties(struct mesh_node *node, const char *path,
l_debug("path %s", path);
- node->comp = l_new(struct node_composition, 1);
- node->comp->crpl = mesh_get_crpl();
+ node->comp.crpl = mesh_get_crpl();
while (l_dbus_message_iter_next_entry(properties, &key, &variant)) {
if (!cid && !strcmp(key, "CompanyID")) {
if (!l_dbus_message_iter_get_variant(&variant, "q",
- &node->comp->cid))
- goto fail;
+ &node->comp.cid))
+ return false;
cid = true;
continue;
}
if (!pid && !strcmp(key, "ProductID")) {
if (!l_dbus_message_iter_get_variant(&variant, "q",
- &node->comp->pid))
- goto fail;
+ &node->comp.pid))
+ return false;
pid = true;
continue;
}
if (!vid && !strcmp(key, "VersionID")) {
if (!l_dbus_message_iter_get_variant(&variant, "q",
- &node->comp->vid))
+ &node->comp.vid))
return false;
vid = true;
continue;
@@ -1315,21 +1312,16 @@ static bool get_app_properties(struct mesh_node *node, const char *path,
if (!strcmp(key, "CRPL")) {
if (!l_dbus_message_iter_get_variant(&variant, "q",
- &node->comp->crpl))
- goto fail;
+ &node->comp.crpl))
+ return false;
continue;
}
}
if (!cid || !pid || !vid)
- goto fail;
+ return false;
return true;
-fail:
- l_free(node->comp);
- node->comp = NULL;
-
- return false;
}
static bool add_local_node(struct mesh_node *node, uint16_t unicast, bool kr,
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH BlueZ v2 2/4] mesh: add cid/pid/vid setter
2020-01-30 14:34 [PATCH BlueZ v2 0/4] Allow to reattach with new composition data Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 1/4] mesh: use static node_comp instead of the pointer Jakub Witowski
@ 2020-01-30 14:34 ` Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 3/4] mesh: remove unused node_set_device_key() Jakub Witowski
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Jakub Witowski @ 2020-01-30 14:34 UTC (permalink / raw)
To: linux-bluetooth
This patch adds the setter for the CID PID and VID.
---
mesh/mesh-config-json.c | 40 ++++++++++++++++++++++++++++++++--------
mesh/mesh-config.h | 2 ++
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/mesh/mesh-config-json.c b/mesh/mesh-config-json.c
index 5855149e3..0574c166e 100644
--- a/mesh/mesh-config-json.c
+++ b/mesh/mesh-config-json.c
@@ -1456,6 +1456,24 @@ static bool write_mode(json_object *jobj, const char *keyword, int value)
return true;
}
+static bool write_comp_id(json_object *jobj, uint16_t cid, uint16_t pid,
+ uint16_t vid)
+{
+ if (!jobj)
+ return false;
+
+ if (!write_uint16_hex(jobj, "cid", cid))
+ return false;
+
+ if (!write_uint16_hex(jobj, "pid", pid))
+ return false;
+
+ if (!write_uint16_hex(jobj, "vid", vid))
+ return false;
+
+ return true;
+}
+
bool mesh_config_write_mode(struct mesh_config *cfg, const char *keyword,
int value)
{
@@ -1595,16 +1613,10 @@ static struct mesh_config *create_config(const char *cfg_path,
jnode = json_object_new_object();
- /* CID, PID, VID, crpl */
- if (!write_uint16_hex(jnode, "cid", node->cid))
- return NULL;
-
- if (!write_uint16_hex(jnode, "pid", node->pid))
- return NULL;
-
- if (!write_uint16_hex(jnode, "vid", node->vid))
+ if (!write_comp_id(jnode, node->cid, node->pid, node->vid))
return NULL;
+ /* CRPL */
if (!write_uint16_hex(jnode, "crpl", node->crpl))
return NULL;
@@ -2052,6 +2064,18 @@ bool mesh_config_write_ttl(struct mesh_config *cfg, uint8_t ttl)
return save_config(cfg->jnode, cfg->node_dir_path);
}
+bool mesh_config_write_comp_id(struct mesh_config *cfg, uint16_t cid,
+ uint16_t pid, uint16_t vid)
+{
+ if (!cfg)
+ return false;
+
+ if (!write_comp_id(cfg->jnode, cid, pid, vid))
+ return false;
+
+ return true;
+}
+
static bool load_node(const char *fname, const uint8_t uuid[16],
mesh_config_node_func_t cb, void *user_data)
{
diff --git a/mesh/mesh-config.h b/mesh/mesh-config.h
index a5b12bbad..9a5d6e57a 100644
--- a/mesh/mesh-config.h
+++ b/mesh/mesh-config.h
@@ -135,6 +135,8 @@ bool mesh_config_write_unicast(struct mesh_config *cfg, uint16_t unicast);
bool mesh_config_write_relay_mode(struct mesh_config *cfg, uint8_t mode,
uint8_t count, uint16_t interval);
bool mesh_config_write_ttl(struct mesh_config *cfg, uint8_t ttl);
+bool mesh_config_write_comp_id(struct mesh_config *cfg, uint16_t cid,
+ uint16_t pid, uint16_t vid);
bool mesh_config_write_mode(struct mesh_config *cfg, const char *keyword,
int value);
bool mesh_config_model_binding_add(struct mesh_config *cfg, uint16_t ele_addr,
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH BlueZ v2 3/4] mesh: remove unused node_set_device_key()
2020-01-30 14:34 [PATCH BlueZ v2 0/4] Allow to reattach with new composition data Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 1/4] mesh: use static node_comp instead of the pointer Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 2/4] mesh: add cid/pid/vid setter Jakub Witowski
@ 2020-01-30 14:34 ` Jakub Witowski
2020-01-30 14:34 ` [PATCH BlueZ v2 4/4] mesh: allow to reattach with new composition data Jakub Witowski
2020-01-31 18:30 ` [PATCH BlueZ v2 0/4] Allow " Gix, Brian
4 siblings, 0 replies; 6+ messages in thread
From: Jakub Witowski @ 2020-01-30 14:34 UTC (permalink / raw)
To: linux-bluetooth
This patch removes node_set_device_key() function,
because it is unused.
---
mesh/node.c | 5 -----
mesh/node.h | 1 -
2 files changed, 6 deletions(-)
diff --git a/mesh/node.c b/mesh/node.c
index 6fe70742d..d4be070fa 100644
--- a/mesh/node.c
+++ b/mesh/node.c
@@ -628,11 +628,6 @@ uint16_t node_get_primary(struct mesh_node *node)
return node->primary;
}
-void node_set_device_key(struct mesh_node *node, uint8_t key[16])
-{
- memcpy(node->dev_key, key, 16);
-}
-
const uint8_t *node_get_device_key(struct mesh_node *node)
{
if (!node)
diff --git a/mesh/node.h b/mesh/node.h
index a6bc4a2a6..38aea138f 100644
--- a/mesh/node.h
+++ b/mesh/node.h
@@ -46,7 +46,6 @@ uint16_t node_get_primary(struct mesh_node *node);
uint16_t node_get_primary_net_idx(struct mesh_node *node);
void node_set_token(struct mesh_node *node, uint8_t token[8]);
const uint8_t *node_get_token(struct mesh_node *node);
-void node_set_device_key(struct mesh_node *node, uint8_t key[16]);
const uint8_t *node_get_device_key(struct mesh_node *node);
void node_set_num_elements(struct mesh_node *node, uint8_t num_ele);
uint8_t node_get_num_elements(struct mesh_node *node);
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH BlueZ v2 4/4] mesh: allow to reattach with new composition data
2020-01-30 14:34 [PATCH BlueZ v2 0/4] Allow to reattach with new composition data Jakub Witowski
` (2 preceding siblings ...)
2020-01-30 14:34 ` [PATCH BlueZ v2 3/4] mesh: remove unused node_set_device_key() Jakub Witowski
@ 2020-01-30 14:34 ` Jakub Witowski
2020-01-31 18:30 ` [PATCH BlueZ v2 0/4] Allow " Gix, Brian
4 siblings, 0 replies; 6+ messages in thread
From: Jakub Witowski @ 2020-01-30 14:34 UTC (permalink / raw)
To: linux-bluetooth
This patch allows to change the CIP/PID/VID data when
reattaching. Additionally the device key is verified
during those change.
---
mesh/node.c | 39 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/mesh/node.c b/mesh/node.c
index d4be070fa..86102d1da 100644
--- a/mesh/node.c
+++ b/mesh/node.c
@@ -47,6 +47,9 @@
#define MIN_COMP_SIZE 14
+/* COMP_ID_SIZE consists of length of the CID, PID and VID */
+#define COMP_ID_SIZE 6
+
#define MESH_NODE_PATH_PREFIX "/node"
/* Default values for a new locally created node */
@@ -1389,15 +1392,49 @@ static bool check_req_node(struct managed_obj_request *req)
uint16_t attach_len = node_generate_comp(req->attach,
attach_comp, sizeof(attach_comp));
+ uint8_t keyring_dev_key[16];
+
/* Ignore feature bits in Composition Compare */
node_comp[8] = 0;
attach_comp[8] = 0;
+ /* Ignore CID, PID, VID in Composition Compare */
if (node_len != attach_len ||
- memcmp(node_comp, attach_comp, node_len)) {
+ memcmp(node_comp + COMP_ID_SIZE,
+ attach_comp + COMP_ID_SIZE,
+ node_len - COMP_ID_SIZE)) {
l_debug("Failed to verify app's composition data");
return false;
}
+
+ /* Compare CID, VID and PID */
+ if (!memcmp(node_comp, attach_comp, COMP_ID_SIZE))
+ return true;
+
+ /* Verify the device key */
+ keyring_get_remote_dev_key(req->attach, req->attach->primary,
+ keyring_dev_key);
+
+ if (memcmp(keyring_dev_key,
+ node_get_device_key(req->attach), 16))
+ return false;
+
+ if (!mesh_config_write_comp_id(req->attach->cfg,
+ req->node->comp.cid,
+ req->node->comp.pid,
+ req->node->comp.vid)) {
+ l_debug("Failed to update comp id data");
+ return false;
+ }
+
+ if (!mesh_config_save(req->attach->cfg, true, NULL, NULL)) {
+ l_debug("Failed to store comp id");
+ return false;
+ }
+
+ memcpy(&req->attach->comp, &req->node->comp,
+ sizeof(struct node_composition) -
+ sizeof(req->node->comp.crpl));
}
return true;
--
2.20.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH BlueZ v2 0/4] Allow to reattach with new composition data
2020-01-30 14:34 [PATCH BlueZ v2 0/4] Allow to reattach with new composition data Jakub Witowski
` (3 preceding siblings ...)
2020-01-30 14:34 ` [PATCH BlueZ v2 4/4] mesh: allow to reattach with new composition data Jakub Witowski
@ 2020-01-31 18:30 ` Gix, Brian
4 siblings, 0 replies; 6+ messages in thread
From: Gix, Brian @ 2020-01-31 18:30 UTC (permalink / raw)
To: jakub.witowski, linux-bluetooth
Hi Jakub,
On Thu, 2020-01-30 at 15:34 +0100, Jakub Witowski wrote:
> This patch allows the application to modify the CID, PID and VID in the composition data.
>
> Version 2: Do not allow to change CRPL in the composition data.
> Additionaly verify the device key when updating comp data and remove
> unused function in the 3rd patch.
>
> Version 1: According the Mesh Profile (2.3.4 Elements) the modification of fields
> other than "Elements" is not prohibited.
>
> Also in my opinion (as you can see in the 1st patch), there is no need to use pointer to
> the node_composition struct. The static is more clear and less problematic.
>
> Jakub Witowski (4):
> mesh: use static node_comp instead of the pointer
> mesh: add cid/pid/vid setter
> mesh: remove unused node_set_device_key()
> mesh: allow to reattach with new composition data
Patches 1 and 3 of this patchset have been applied, as they are non-controversial.
I would like to wait a little while, as the Working group weighs in, on modifying composition data.
I am actually ready today to allow an App to Attach to an existing node, with modifications to it's CID/PID/VID
(drop daemon validation) with the understanding that the composition stored in node.json is not changed. But
anything that changes OTA behavior, I would like blessed by the WG and the SIG.
>
> mesh/mesh-config-json.c | 40 ++++++++++++----
> mesh/mesh-config.h | 2 +
> mesh/node.c | 100 +++++++++++++++++++++++++---------------
> mesh/node.h | 1 -
> 4 files changed, 96 insertions(+), 47 deletions(-)
>
^ permalink raw reply [flat|nested] 6+ messages in thread