Linux-Bluetooth Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx
@ 2020-08-02 14:56 Tamás Szűcs
  2020-08-02 18:00 ` Marcel Holtmann
  0 siblings, 1 reply; 2+ messages in thread
From: Tamás Szűcs @ 2020-08-02 14:56 UTC (permalink / raw)
  To: Marcel Holtmann, Johan Hedberg, linux-bluetooth, linux-kernel
  Cc: Tamás Szűcs

SD89xx devices use identical card register settings. Make sure a single common
instance is used to describe them.

Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
---
 drivers/bluetooth/btmrvl_sdio.c | 54 +++------------------------------
 1 file changed, 4 insertions(+), 50 deletions(-)

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index cfb9f9db44a0..92b28ff331b4 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -215,30 +215,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
 	.fw_dump_end = 0xea,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
+static const struct btmrvl_sdio_card_reg btmrvl_reg_89xx = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
 	.host_intstatus = 0x0c,
@@ -261,29 +238,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
 	.fw_dump_end = 0xf8,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -332,7 +286,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8977_combo_v2.bin",
-	.reg            = &btmrvl_reg_8977,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,
@@ -341,7 +295,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8987_uapsta.bin",
-	.reg		= &btmrvl_reg_8987,
+	.reg		= &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl	= 256,
 	.supports_fw_dump = true,
@@ -350,7 +304,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8997_combo_v4.bin",
-	.reg            = &btmrvl_reg_8997,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,
-- 
2.20.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-02 14:56 [PATCH] Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx Tamás Szűcs
2020-08-02 18:00 ` Marcel Holtmann

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git