* [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS
@ 2021-05-13 10:18 hildawu
2021-05-13 11:13 ` bluez.test.bot
2021-05-13 15:12 ` [PATCH] " Marcel Holtmann
0 siblings, 2 replies; 4+ messages in thread
From: hildawu @ 2021-05-13 10:18 UTC (permalink / raw)
To: marcel
Cc: johan.hedberg, luiz.dentz, linux-bluetooth, linux-kernel,
max.chou, alex_lu, kidman
From: hildawu <hildawu@realtek.com>
Because mSBC frames do not need to be aligned to the SCO packet
boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
data satisfy 60 Bytes avoid payload unaligned situation and fixed
some headset no voise issue.
USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
Signed-off-by: hildawu <hildawu@realtek.com>
---
drivers/bluetooth/btusb.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 6f253378e893..872034e7a232 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1752,6 +1752,13 @@ static void btusb_work(struct work_struct *work)
* which work with WBS at all.
*/
new_alts = btusb_find_altsetting(data, 6) ? 6 : 1;
+ /* Because mSBC frames do not need to be aligned to the
+ * SCO packet boundary. If support the Alt 3, use the
+ * Alt 3 for HCI payload >= 60 Bytes let air packet
+ * data satisfy 60 bytes.
+ */
+ if ((new_alts == 1) && (btusb_find_altsetting(data, 3)))
+ new_alts = 3;
}
if (btusb_switch_alt_setting(hdev, new_alts) < 0)
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: Bluetooth: btusb: Add support USB ALT 3 for WBS
2021-05-13 10:18 [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS hildawu
@ 2021-05-13 11:13 ` bluez.test.bot
2021-05-13 15:12 ` [PATCH] " Marcel Holtmann
1 sibling, 0 replies; 4+ messages in thread
From: bluez.test.bot @ 2021-05-13 11:13 UTC (permalink / raw)
To: linux-bluetooth, hildawu
[-- Attachment #1: Type: text/plain, Size: 2630 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=481767
---Test result---
Test Summary:
CheckPatch PASS 0.55 seconds
GitLint PASS 0.12 seconds
BuildKernel PASS 586.21 seconds
TestRunner: Setup PASS 384.10 seconds
TestRunner: l2cap-tester PASS 2.74 seconds
TestRunner: bnep-tester PASS 2.02 seconds
TestRunner: mgmt-tester PASS 28.52 seconds
TestRunner: rfcomm-tester PASS 2.23 seconds
TestRunner: sco-tester PASS 2.13 seconds
TestRunner: smp-tester PASS 2.35 seconds
TestRunner: userchan-tester PASS 2.06 seconds
Details
##############################
Test: CheckPatch - PASS - 0.55 seconds
Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS - 0.12 seconds
Run gitlint with rule in .gitlint
##############################
Test: BuildKernel - PASS - 586.21 seconds
Build Kernel with minimal configuration supports Bluetooth
##############################
Test: TestRunner: Setup - PASS - 384.10 seconds
Setup environment for running Test Runner
##############################
Test: TestRunner: l2cap-tester - PASS - 2.74 seconds
Run test-runner with l2cap-tester
Total: 40, Passed: 40 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: bnep-tester - PASS - 2.02 seconds
Run test-runner with bnep-tester
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: mgmt-tester - PASS - 28.52 seconds
Run test-runner with mgmt-tester
Total: 416, Passed: 403 (96.9%), Failed: 0, Not Run: 13
##############################
Test: TestRunner: rfcomm-tester - PASS - 2.23 seconds
Run test-runner with rfcomm-tester
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: sco-tester - PASS - 2.13 seconds
Run test-runner with sco-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: smp-tester - PASS - 2.35 seconds
Run test-runner with smp-tester
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: TestRunner: userchan-tester - PASS - 2.06 seconds
Run test-runner with userchan-tester
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 44230 bytes --]
[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3557 bytes --]
[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 546745 bytes --]
[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11677 bytes --]
[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9912 bytes --]
[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11823 bytes --]
[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5454 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS
2021-05-13 10:18 [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS hildawu
2021-05-13 11:13 ` bluez.test.bot
@ 2021-05-13 15:12 ` Marcel Holtmann
2021-05-14 2:31 ` Hilda Wu
1 sibling, 1 reply; 4+ messages in thread
From: Marcel Holtmann @ 2021-05-13 15:12 UTC (permalink / raw)
To: Hilda Wu
Cc: Johan Hedberg, Luiz Augusto von Dentz,
Bluetooth Kernel Mailing List, open list, max.chou, alex_lu,
kidman
Hi Hilda,
> Because mSBC frames do not need to be aligned to the SCO packet
> boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
> data satisfy 60 Bytes avoid payload unaligned situation and fixed
> some headset no voise issue.
>
> USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
>
> Signed-off-by: hildawu <hildawu@realtek.com>
please use real name here.
> ---
> drivers/bluetooth/btusb.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 6f253378e893..872034e7a232 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -1752,6 +1752,13 @@ static void btusb_work(struct work_struct *work)
> * which work with WBS at all.
> */
> new_alts = btusb_find_altsetting(data, 6) ? 6 : 1;
> + /* Because mSBC frames do not need to be aligned to the
> + * SCO packet boundary. If support the Alt 3, use the
> + * Alt 3 for HCI payload >= 60 Bytes let air packet
> + * data satisfy 60 bytes.
> + */
> + if ((new_alts == 1) && (btusb_find_altsetting(data, 3)))
> + new_alts = 3;
if (new_alts == 1 && btusb_find_altsetting(..))
..
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS
2021-05-13 15:12 ` [PATCH] " Marcel Holtmann
@ 2021-05-14 2:31 ` Hilda Wu
0 siblings, 0 replies; 4+ messages in thread
From: Hilda Wu @ 2021-05-14 2:31 UTC (permalink / raw)
To: Marcel Holtmann
Cc: Johan Hedberg, Luiz Augusto von Dentz,
Bluetooth Kernel Mailing List, open list, Max Chou, alex_lu,
KidmanLee
Hi Marcel,
Thank you!
I will propose a patch v2.
Regards,
Hilda
-----Original Message-----
From: Marcel Holtmann <marcel@holtmann.org>
Sent: Thursday, May 13, 2021 11:13 PM
To: Hilda Wu <hildawu@realtek.com>
Cc: Johan Hedberg <johan.hedberg@gmail.com>; Luiz Augusto von Dentz <luiz.dentz@gmail.com>; Bluetooth Kernel Mailing List <linux-bluetooth@vger.kernel.org>; open list <linux-kernel@vger.kernel.org>; Max Chou <max.chou@realtek.com>; alex_lu@realsil.com.cn; KidmanLee <kidman@realtek.com>
Subject: Re: [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS
Hi Hilda,
> Because mSBC frames do not need to be aligned to the SCO packet
> boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC data
> satisfy 60 Bytes avoid payload unaligned situation and fixed some
> headset no voise issue.
>
> USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
>
> Signed-off-by: hildawu <hildawu@realtek.com>
please use real name here.
> ---
> drivers/bluetooth/btusb.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 6f253378e893..872034e7a232 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -1752,6 +1752,13 @@ static void btusb_work(struct work_struct *work)
> * which work with WBS at all.
> */
> new_alts = btusb_find_altsetting(data, 6) ? 6 : 1;
> + /* Because mSBC frames do not need to be aligned to the
> + * SCO packet boundary. If support the Alt 3, use the
> + * Alt 3 for HCI payload >= 60 Bytes let air packet
> + * data satisfy 60 bytes.
> + */
> + if ((new_alts == 1) && (btusb_find_altsetting(data, 3)))
> + new_alts = 3;
if (new_alts == 1 && btusb_find_altsetting(..))
..
Regards
Marcel
------Please consider the environment before printing this e-mail.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-14 2:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-13 10:18 [PATCH] Bluetooth: btusb: Add support USB ALT 3 for WBS hildawu
2021-05-13 11:13 ` bluez.test.bot
2021-05-13 15:12 ` [PATCH] " Marcel Holtmann
2021-05-14 2:31 ` Hilda Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).