* [BlueZ PATCH] tools: userchan-tester: Add test case for the closing channel
@ 2021-08-20 4:56 Tedd Ho-Jeong An
2021-08-20 5:36 ` [BlueZ] " bluez.test.bot
0 siblings, 1 reply; 4+ messages in thread
From: Tedd Ho-Jeong An @ 2021-08-20 4:56 UTC (permalink / raw)
To: linux-bluetooth
From: Tedd Ho-Jeong An <tedd.an@intel.com>
This patch adds a test casse for checking the controller power state
after closing the user channel.
When the user channel is closed, the controller should be powered down
state.
---
tools/userchan-tester.c | 70 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/tools/userchan-tester.c b/tools/userchan-tester.c
index c17644fb8..ab95c0044 100644
--- a/tools/userchan-tester.c
+++ b/tools/userchan-tester.c
@@ -40,6 +40,8 @@ struct test_data {
enum hciemu_type hciemu_type;
const void *test_data;
unsigned int remove_id;
+ struct bt_hci *hci;
+ uint32_t current_settings;
};
static void mgmt_debug(const char *str, void *user_data)
@@ -81,6 +83,8 @@ static void read_info_callback(uint8_t status, uint16_t length,
tester_print(" Name: %s", rp->name);
tester_print(" Short name: %s", rp->short_name);
+ data->current_settings = current_settings;
+
if (strcmp(hciemu_get_address(data->hciemu), addr)) {
tester_pre_setup_failed();
return;
@@ -291,6 +295,69 @@ static void test_open_failed(const void *test_data)
tester_test_failed();
}
+static void close_read_info_callback(uint8_t status, uint16_t length,
+ const void *param, void *user_data)
+{
+ const struct mgmt_rp_read_info *rp = param;
+ uint32_t current_settings;
+
+ tester_print("Read Info callback");
+ tester_print(" Status: 0x%02x", status);
+
+ if (status || !param) {
+ tester_test_failed();
+ return;
+ }
+
+ current_settings = btohl(rp->current_settings);
+
+ if (!(current_settings & MGMT_SETTING_POWERED)) {
+ tester_print("Controller is powered");
+ tester_test_failed();
+ return;
+ }
+
+ tester_test_passed();
+}
+
+static void setup_channel_open(const void *test_data)
+{
+ struct test_data *data = tester_get_data();
+
+ /* Check power off */
+ if (data->current_settings & MGMT_SETTING_POWERED) {
+ tester_print("Controller is powered");
+ tester_setup_failed();
+ return;
+ }
+
+ /* Open Channel */
+ data->hci = bt_hci_new_user_channel(data->mgmt_index);
+ if (!data->hci) {
+ mgmt_unregister(data->mgmt, data->remove_id);
+ data->remove_id = 0;
+
+ tester_setup_failed();
+ return;
+ }
+
+ tester_print("User Channel Opened");
+
+ tester_setup_complete();
+}
+
+static void test_close_success(const void *test_data)
+{
+ struct test_data *data = tester_get_data();
+
+ tester_print("Close User Channel");
+ bt_hci_unref(data->hci);
+
+ /* Check if power is off */
+ mgmt_send(data->mgmt, MGMT_OP_READ_INFO, data->mgmt_index, 0, NULL,
+ close_read_info_callback, NULL, NULL);
+}
+
#define test_user(name, data, setup, func) \
do { \
struct test_data *user; \
@@ -316,6 +383,9 @@ int main(int argc, char *argv[])
setup_powered, test_open_failed);
test_user("User channel open - Power Toggle Success", INT_TO_PTR(true),
toggle_powered, test_open_success);
+ test_user("User channel close - Success", NULL,
+ setup_channel_open, test_close_success);
+
return tester_run();
}
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: [BlueZ] tools: userchan-tester: Add test case for the closing channel
2021-08-20 4:56 [BlueZ PATCH] tools: userchan-tester: Add test case for the closing channel Tedd Ho-Jeong An
@ 2021-08-20 5:36 ` bluez.test.bot
0 siblings, 0 replies; 4+ messages in thread
From: bluez.test.bot @ 2021-08-20 5:36 UTC (permalink / raw)
To: linux-bluetooth, hj.tedd.an
[-- Attachment #1: Type: text/plain, Size: 1953 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534641
---Test result---
Test Summary:
CheckPatch PASS 0.38 seconds
GitLint PASS 0.13 seconds
Prep - Setup ELL PASS 50.36 seconds
Build - Prep PASS 0.15 seconds
Build - Configure PASS 9.09 seconds
Build - Make PASS 220.21 seconds
Make Check PASS 9.07 seconds
Make Distcheck PASS 258.98 seconds
Build w/ext ELL - Configure PASS 8.71 seconds
Build w/ext ELL - Make PASS 207.69 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [BlueZ] tools: userchan-tester: Add test case for the closing channel
2021-08-20 5:35 ` [BlueZ] " bluez.test.bot
@ 2021-09-17 20:32 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 4+ messages in thread
From: Luiz Augusto von Dentz @ 2021-09-17 20:32 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Tedd Ho-Jeong An
Hi Tedd,
On Thu, Aug 19, 2021 at 11:00 PM <bluez.test.bot@gmail.com> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534645
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.40 seconds
> GitLint PASS 0.12 seconds
> Prep - Setup ELL PASS 48.16 seconds
> Build - Prep PASS 0.14 seconds
> Build - Configure PASS 8.45 seconds
> Build - Make PASS 203.34 seconds
> Make Check PASS 9.51 seconds
> Make Distcheck PASS 238.94 seconds
> Build w/ext ELL - Configure PASS 7.95 seconds
> Build w/ext ELL - Make PASS 190.48 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Distcheck - PASS
> Desc: Run distcheck to check the distribution
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
>
>
>
> ---
> Regards,
> Linux Bluetooth
Applied, thanks.
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [BlueZ] tools: userchan-tester: Add test case for the closing channel
2021-08-20 5:07 [BlueZ PATCH] " Tedd Ho-Jeong An
@ 2021-08-20 5:35 ` bluez.test.bot
2021-09-17 20:32 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 4+ messages in thread
From: bluez.test.bot @ 2021-08-20 5:35 UTC (permalink / raw)
To: linux-bluetooth, hj.tedd.an
[-- Attachment #1: Type: text/plain, Size: 1953 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=534645
---Test result---
Test Summary:
CheckPatch PASS 0.40 seconds
GitLint PASS 0.12 seconds
Prep - Setup ELL PASS 48.16 seconds
Build - Prep PASS 0.14 seconds
Build - Configure PASS 8.45 seconds
Build - Make PASS 203.34 seconds
Make Check PASS 9.51 seconds
Make Distcheck PASS 238.94 seconds
Build w/ext ELL - Configure PASS 7.95 seconds
Build w/ext ELL - Make PASS 190.48 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Distcheck - PASS
Desc: Run distcheck to check the distribution
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-09-17 20:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-20 4:56 [BlueZ PATCH] tools: userchan-tester: Add test case for the closing channel Tedd Ho-Jeong An
2021-08-20 5:36 ` [BlueZ] " bluez.test.bot
2021-08-20 5:07 [BlueZ PATCH] " Tedd Ho-Jeong An
2021-08-20 5:35 ` [BlueZ] " bluez.test.bot
2021-09-17 20:32 ` Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).