Load Broadcom firmware patch for 413c:8197

Load Broadcom firmware patch for 413c:8197

[Ian Mackinnon]

413c:8197 is a Dell-branded Broadcom BCM20702 device which requires
the patch `BCM20702A1-413c-8197.hcd`[1] to be loaded in order for
HSP/HFP functionality to work.

Currently this device is listed early on in `btusb_table` as not
requiring patchram. If that entry is removed the device is correctly
handled by the later `USB_VENDOR_AND_INTERFACE_INFO` entry marking all
Dell (413c) devices as requiring patchram.

Patch:

--
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 5cbfbd948f6..2d24231f898 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -119,9 +119,6 @@ static const struct usb_device_id btusb_table[] = {
  /* Canyon CN-BTU1 with HID interfaces */
  { USB_DEVICE(0x0c10, 0x0000) },

- /* Broadcom BCM20702A0 */
- { USB_DEVICE(0x413c, 0x8197) },
-
  /* Broadcom BCM20702B0 (Dynex/Insignia) */
  { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },

--

Relevant slice of `/sys/kernel/debug/usb/devices`:

--
T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=74E54354F609
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
--


[1]: https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM20702A1-413c-8197.hcd

Re: Load Broadcom firmware patch for 413c:8197

[Marcel Holtmann]

Hi Ian,

> 413c:8197 is a Dell-branded Broadcom BCM20702 device which requires
> the patch `BCM20702A1-413c-8197.hcd`[1] to be loaded in order for
> HSP/HFP functionality to work.
> 
> Currently this device is listed early on in `btusb_table` as not
> requiring patchram. If that entry is removed the device is correctly
> handled by the later `USB_VENDOR_AND_INTERFACE_INFO` entry marking all
> Dell (413c) devices as requiring patchram.
> 
> Patch:
> 
> --
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 5cbfbd948f6..2d24231f898 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -119,9 +119,6 @@ static const struct usb_device_id btusb_table[] = {
>  /* Canyon CN-BTU1 with HID interfaces */
>  { USB_DEVICE(0x0c10, 0x0000) },
> 
> - /* Broadcom BCM20702A0 */
> - { USB_DEVICE(0x413c, 0x8197) },
> -
>  /* Broadcom BCM20702B0 (Dynex/Insignia) */
>  { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
> 
> --
> 
> Relevant slice of `/sys/kernel/debug/usb/devices`:
> 
> --
> T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=413c ProdID=8197 Rev= 1.12
> S:  Manufacturer=Broadcom Corp
> S:  Product=BCM20702A0
> S:  SerialNumber=74E54354F609
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
> E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
> E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
> I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
> --
> 
> 
> [1]: https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM20702A1-413c-8197.hcd

please create a complete patch and full commit message via git format-patch that we can merge.

Regards

Marcel