* [BlueZ PATCH v1] device: Reply to connect request if SDP search failed
@ 2021-04-19 23:36 Miao-chen Chou
2021-04-20 0:03 ` [BlueZ,v1] " bluez.test.bot
0 siblings, 1 reply; 3+ messages in thread
From: Miao-chen Chou @ 2021-04-19 23:36 UTC (permalink / raw)
To: Bluetooth Kernel Mailing List
Cc: Alain Michaud, Sonny Sasaka, Marcel Holtmann,
Luiz Augusto von Dentz, Miao-chen Chou
SDP request can be initiated during BR/EDR connection. This fixes a
missing reply to the method call to prevent generic error message for
no reply.
The following test steps were performed:
(1) Put Bose QC35 into pairing mode, start scanning on bluetoothctl
(2) Turn off the headphones and connect to the headphones
(3) Verify that error should returns immediately to bluetoothctl
---
src/device.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/src/device.c b/src/device.c
index df440ce09..516ffe2e7 100644
--- a/src/device.c
+++ b/src/device.c
@@ -4966,6 +4966,7 @@ static void search_cb(sdp_list_t *recs, int err, gpointer user_data)
{
struct browse_req *req = user_data;
struct btd_device *device = req->device;
+ DBusMessage *reply;
GSList *primaries;
char addr[18];
@@ -5009,6 +5010,18 @@ static void search_cb(sdp_list_t *recs, int err, gpointer user_data)
DEVICE_INTERFACE, "UUIDs");
send_reply:
+ /* If SDP search failed during an ongoing connection request, we should
+ * reply to D-Bus method call.
+ */
+ if (err < 0 && device->connect) {
+ DBG("SDP failed during connection");
+ reply = btd_error_failed(device->connect,
+ strerror(-err));
+ g_dbus_send_message(dbus_conn, reply);
+ dbus_message_unref(device->connect);
+ device->connect = NULL;
+ }
+
device_svc_resolved(device, BROWSE_SDP, BDADDR_BREDR, err);
}
--
2.31.1.368.gbe11c130af-goog
^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: [BlueZ,v1] device: Reply to connect request if SDP search failed
2021-04-19 23:36 [BlueZ PATCH v1] device: Reply to connect request if SDP search failed Miao-chen Chou
@ 2021-04-20 0:03 ` bluez.test.bot
2021-04-21 0:01 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 3+ messages in thread
From: bluez.test.bot @ 2021-04-20 0:03 UTC (permalink / raw)
To: linux-bluetooth, mcchou
[-- Attachment #1: Type: text/plain, Size: 2296 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=469903
---Test result---
Test Summary:
CheckPatch PASS 0.32 seconds
GitLint PASS 0.10 seconds
Prep - Setup ELL PASS 44.34 seconds
Build - Prep PASS 0.10 seconds
Build - Configure PASS 7.74 seconds
Build - Make PASS 184.91 seconds
Make Check PASS 8.96 seconds
Make Dist PASS 11.44 seconds
Make Dist - Configure PASS 4.77 seconds
Make Dist - Make PASS 76.05 seconds
Build w/ext ELL - Configure PASS 7.68 seconds
Build w/ext ELL - Make PASS 176.90 seconds
Details
##############################
Test: CheckPatch - PASS
Desc: Run checkpatch.pl script with rule in .checkpatch.conf
##############################
Test: GitLint - PASS
Desc: Run gitlint with rule in .gitlint
##############################
Test: Prep - Setup ELL - PASS
Desc: Clone, build, and install ELL
##############################
Test: Build - Prep - PASS
Desc: Prepare environment for build
##############################
Test: Build - Configure - PASS
Desc: Configure the BlueZ source tree
##############################
Test: Build - Make - PASS
Desc: Build the BlueZ source tree
##############################
Test: Make Check - PASS
Desc: Run 'make check'
##############################
Test: Make Dist - PASS
Desc: Run 'make dist' and build the distribution tarball
##############################
Test: Make Dist - Configure - PASS
Desc: Configure the source from distribution tarball
##############################
Test: Make Dist - Make - PASS
Desc: Build the source from distribution tarball
##############################
Test: Build w/ext ELL - Configure - PASS
Desc: Configure BlueZ source with '--enable-external-ell' configuration
##############################
Test: Build w/ext ELL - Make - PASS
Desc: Build BlueZ source with '--enable-external-ell' configuration
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [BlueZ,v1] device: Reply to connect request if SDP search failed
2021-04-20 0:03 ` [BlueZ,v1] " bluez.test.bot
@ 2021-04-21 0:01 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 3+ messages in thread
From: Luiz Augusto von Dentz @ 2021-04-21 0:01 UTC (permalink / raw)
To: linux-bluetooth; +Cc: Miao-chen Chou
Hi Miao,
On Mon, Apr 19, 2021 at 5:04 PM <bluez.test.bot@gmail.com> wrote:
>
> This is automated email and please do not reply to this email!
>
> Dear submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=469903
>
> ---Test result---
>
> Test Summary:
> CheckPatch PASS 0.32 seconds
> GitLint PASS 0.10 seconds
> Prep - Setup ELL PASS 44.34 seconds
> Build - Prep PASS 0.10 seconds
> Build - Configure PASS 7.74 seconds
> Build - Make PASS 184.91 seconds
> Make Check PASS 8.96 seconds
> Make Dist PASS 11.44 seconds
> Make Dist - Configure PASS 4.77 seconds
> Make Dist - Make PASS 76.05 seconds
> Build w/ext ELL - Configure PASS 7.68 seconds
> Build w/ext ELL - Make PASS 176.90 seconds
>
> Details
> ##############################
> Test: CheckPatch - PASS
> Desc: Run checkpatch.pl script with rule in .checkpatch.conf
>
> ##############################
> Test: GitLint - PASS
> Desc: Run gitlint with rule in .gitlint
>
> ##############################
> Test: Prep - Setup ELL - PASS
> Desc: Clone, build, and install ELL
>
> ##############################
> Test: Build - Prep - PASS
> Desc: Prepare environment for build
>
> ##############################
> Test: Build - Configure - PASS
> Desc: Configure the BlueZ source tree
>
> ##############################
> Test: Build - Make - PASS
> Desc: Build the BlueZ source tree
>
> ##############################
> Test: Make Check - PASS
> Desc: Run 'make check'
>
> ##############################
> Test: Make Dist - PASS
> Desc: Run 'make dist' and build the distribution tarball
>
> ##############################
> Test: Make Dist - Configure - PASS
> Desc: Configure the source from distribution tarball
>
> ##############################
> Test: Make Dist - Make - PASS
> Desc: Build the source from distribution tarball
>
> ##############################
> Test: Build w/ext ELL - Configure - PASS
> Desc: Configure BlueZ source with '--enable-external-ell' configuration
>
> ##############################
> Test: Build w/ext ELL - Make - PASS
> Desc: Build BlueZ source with '--enable-external-ell' configuration
Applied, thanks.
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-04-21 0:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-19 23:36 [BlueZ PATCH v1] device: Reply to connect request if SDP search failed Miao-chen Chou
2021-04-20 0:03 ` [BlueZ,v1] " bluez.test.bot
2021-04-21 0:01 ` Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).