* [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format
@ 2021-04-08 17:01 Kiran K
2021-04-08 17:53 ` [v1] " bluez.test.bot
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Kiran K @ 2021-04-08 17:01 UTC (permalink / raw)
To: linux-bluetooth
Cc: ravishankar.srivatsa, chethan.tumkur.narayan, Kiran K, Lokendra Singh
For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.
Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
After fix:
< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x003f
HV1 may be used
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
> HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308
Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308
Status: Success (0x00)
Handle: 257
Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
Link type: eSCO (0x02)
Transmission interval: 0x0c
Retransmission window: 0x04
RX packet length: 60
TX packet length: 60
Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345
Handle: 256
Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
---
net/bluetooth/hci_event.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 016b2999f219..47166cea68bb 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4404,12 +4404,12 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
bt_dev_dbg(hdev, "SCO connected with air mode: %02x", ev->air_mode);
- switch (conn->setting & SCO_AIRMODE_MASK) {
- case SCO_AIRMODE_CVSD:
+ switch (ev->air_mode) {
+ case 0x02:
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_ENABLE_SCO_CVSD);
break;
- case SCO_AIRMODE_TRANSP:
+ case 0x03:
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_ENABLE_SCO_TRANSP);
break;
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: [v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format
2021-04-08 17:01 [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format Kiran K
@ 2021-04-08 17:53 ` bluez.test.bot
2021-04-14 6:04 ` [PATCH v1] " K, Kiran
2021-05-07 8:33 ` Marcel Holtmann
2 siblings, 0 replies; 4+ messages in thread
From: bluez.test.bot @ 2021-04-08 17:53 UTC (permalink / raw)
To: linux-bluetooth, kiran.k
[-- Attachment #1: Type: text/plain, Size: 2840 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=463595
---Test result---
##############################
Test: CheckPatch - FAIL
Bluetooth: Fix alt settings for incoming SCO with transparent coding format
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#11:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
total: 0 errors, 1 warnings, 0 checks, 15 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
"[PATCH] Bluetooth: Fix alt settings for incoming SCO with transparent" has style problems, please review.
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: CheckGitLint - FAIL
Bluetooth: Fix alt settings for incoming SCO with transparent coding format
1: T1 Title exceeds max length (75>72): "Bluetooth: Fix alt settings for incoming SCO with transparent coding format"
##############################
Test: CheckBuildK - PASS
##############################
Test: CheckTestRunner: Setup - PASS
##############################
Test: CheckTestRunner: l2cap-tester - PASS
Total: 40, Passed: 34 (85.0%), Failed: 0, Not Run: 6
##############################
Test: CheckTestRunner: bnep-tester - PASS
Total: 1, Passed: 1 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: mgmt-tester - FAIL
Total: 416, Passed: 394 (94.7%), Failed: 6, Not Run: 16
Failed Test Cases
Set connectable off (LE) - Success 2 Failed 0.028 seconds
Set connectable off (LE) - Success 3 Failed 0.032 seconds
Set connectable off (LE) - Success 4 Failed 0.028 seconds
Add Advertising - Success 13 (ADV_SCAN_IND) Failed 0.028 seconds
Add Advertising - Success 14 (ADV_NONCONN_IND) Failed 0.024 seconds
Add Advertising - Success 17 (Connectable -> off) Failed 0.024 seconds
##############################
Test: CheckTestRunner: rfcomm-tester - PASS
Total: 9, Passed: 9 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: sco-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: smp-tester - PASS
Total: 8, Passed: 8 (100.0%), Failed: 0, Not Run: 0
##############################
Test: CheckTestRunner: userchan-tester - PASS
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
---
Regards,
Linux Bluetooth
[-- Attachment #2: l2cap-tester.log --]
[-- Type: application/octet-stream, Size: 43337 bytes --]
[-- Attachment #3: bnep-tester.log --]
[-- Type: application/octet-stream, Size: 3531 bytes --]
[-- Attachment #4: mgmt-tester.log --]
[-- Type: application/octet-stream, Size: 547117 bytes --]
[-- Attachment #5: rfcomm-tester.log --]
[-- Type: application/octet-stream, Size: 11651 bytes --]
[-- Attachment #6: sco-tester.log --]
[-- Type: application/octet-stream, Size: 9887 bytes --]
[-- Attachment #7: smp-tester.log --]
[-- Type: application/octet-stream, Size: 11798 bytes --]
[-- Attachment #8: userchan-tester.log --]
[-- Type: application/octet-stream, Size: 5428 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format
2021-04-08 17:01 [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format Kiran K
2021-04-08 17:53 ` [v1] " bluez.test.bot
@ 2021-04-14 6:04 ` K, Kiran
2021-05-07 8:33 ` Marcel Holtmann
2 siblings, 0 replies; 4+ messages in thread
From: K, Kiran @ 2021-04-14 6:04 UTC (permalink / raw)
To: K, Kiran, linux-bluetooth
Cc: Srivatsa, Ravishankar, Tumkur Narayan, Chethan, Singh, Lokendra
Hi Marcel,
Gentle reminder.
Thanks,
Kiran
> -----Original Message-----
> From: Kiran K <kiran.k@intel.com>
> Sent: Thursday, April 8, 2021 10:32 PM
> To: linux-bluetooth@vger.kernel.org
> Cc: Srivatsa, Ravishankar <ravishankar.srivatsa@intel.com>; Tumkur
> Narayan, Chethan <chethan.tumkur.narayan@intel.com>; K, Kiran
> <kiran.k@intel.com>; Singh, Lokendra <lokendra.singh@intel.com>
> Subject: [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with
> transparent coding format
>
> For incoming SCO connection with transparent coding format, alt setting of
> CVSD is getting applied instead of Transparent.
>
> Before fix:
> < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0]
> 321.342548
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Transmit bandwidth: 8000
> Receive bandwidth: 8000
> Max latency: 13
> Setting: 0x0003
> Input Coding: Linear
> Input Data Format: 1's complement
> Input Sample Size: 8-bit
> # of bits padding at MSB: 0
> Air Coding Format: Transparent Data
> Retransmission effort: Optimize for link quality (0x02)
> Packet type: 0x003f
> HV1 may be used
> HV2 may be used
> HV3 may be used
> EV3 may be used
> EV4 may be used
> EV5 may be used
> > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
> Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
> Status: Success (0x00)
> > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0]
> > 321.351666
> Status: Success (0x00)
> Handle: 257
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Link type: eSCO (0x02)
> Transmission interval: 0x0c
> Retransmission window: 0x04
> RX packet length: 60
> TX packet length: 60
> Air mode: Transparent (0x03)
> ........
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
> > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
>
> After fix:
>
> < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0]
> 49.439693
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Transmit bandwidth: 8000
> Receive bandwidth: 8000
> Max latency: 13
> Setting: 0x0003
> Input Coding: Linear
> Input Data Format: 1's complement
> Input Sample Size: 8-bit
> # of bits padding at MSB: 0
> Air Coding Format: Transparent Data
> Retransmission effort: Optimize for link quality (0x02)
> Packet type: 0x003f
> HV1 may be used
> HV2 may be used
> HV3 may be used
> EV3 may be used
> EV4 may be used
> EV5 may be used
> > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308
> Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
> Status: Success (0x00)
> > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0]
> > 49.449308
> Status: Success (0x00)
> Handle: 257
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Link type: eSCO (0x02)
> Transmission interval: 0x0c
> Retransmission window: 0x04
> RX packet length: 60
> TX packet length: 60
> Air mode: Transparent (0x03)
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927
> > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345
> Handle: 256
> Max slots: 5
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304
> > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311
>
> Signed-off-by: Kiran K <kiran.k@intel.com>
> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
> ---
> net/bluetooth/hci_event.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index
> 016b2999f219..47166cea68bb 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -4404,12 +4404,12 @@ static void hci_sync_conn_complete_evt(struct
> hci_dev *hdev,
>
> bt_dev_dbg(hdev, "SCO connected with air mode: %02x", ev-
> >air_mode);
>
> - switch (conn->setting & SCO_AIRMODE_MASK) {
> - case SCO_AIRMODE_CVSD:
> + switch (ev->air_mode) {
> + case 0x02:
> if (hdev->notify)
> hdev->notify(hdev,
> HCI_NOTIFY_ENABLE_SCO_CVSD);
> break;
> - case SCO_AIRMODE_TRANSP:
> + case 0x03:
> if (hdev->notify)
> hdev->notify(hdev,
> HCI_NOTIFY_ENABLE_SCO_TRANSP);
> break;
> --
> 2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format
2021-04-08 17:01 [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format Kiran K
2021-04-08 17:53 ` [v1] " bluez.test.bot
2021-04-14 6:04 ` [PATCH v1] " K, Kiran
@ 2021-05-07 8:33 ` Marcel Holtmann
2 siblings, 0 replies; 4+ messages in thread
From: Marcel Holtmann @ 2021-05-07 8:33 UTC (permalink / raw)
To: Kiran K
Cc: Bluetooth Kernel Mailing List, Srivatsa, Ravishankar,
chethan.tumkur.narayan, Lokendra Singh
Hi Kiran,
> For incoming SCO connection with transparent coding format, alt setting
> of CVSD is getting applied instead of Transparent.
>
> Before fix:
> < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Transmit bandwidth: 8000
> Receive bandwidth: 8000
> Max latency: 13
> Setting: 0x0003
> Input Coding: Linear
> Input Data Format: 1's complement
> Input Sample Size: 8-bit
> # of bits padding at MSB: 0
> Air Coding Format: Transparent Data
> Retransmission effort: Optimize for link quality (0x02)
> Packet type: 0x003f
> HV1 may be used
> HV2 may be used
> HV3 may be used
> EV3 may be used
> EV4 may be used
> EV5 may be used
>> HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585
> Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
> Status: Success (0x00)
>> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666
> Status: Success (0x00)
> Handle: 257
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Link type: eSCO (0x02)
> Transmission interval: 0x0c
> Retransmission window: 0x04
> RX packet length: 60
> TX packet length: 60
> Air mode: Transparent (0x03)
> ........
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630
>> SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674
>
> After fix:
>
> < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Transmit bandwidth: 8000
> Receive bandwidth: 8000
> Max latency: 13
> Setting: 0x0003
> Input Coding: Linear
> Input Data Format: 1's complement
> Input Sample Size: 8-bit
> # of bits padding at MSB: 0
> Air Coding Format: Transparent Data
> Retransmission effort: Optimize for link quality (0x02)
> Packet type: 0x003f
> HV1 may be used
> HV2 may be used
> HV3 may be used
> EV3 may be used
> EV4 may be used
> EV5 may be used
>> HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308
> Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
> Status: Success (0x00)
>> HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308
> Status: Success (0x00)
> Handle: 257
> Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
> Link type: eSCO (0x02)
> Transmission interval: 0x0c
> Retransmission window: 0x04
> RX packet length: 60
> TX packet length: 60
> Air mode: Transparent (0x03)
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927
>> HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345
> Handle: 256
> Max slots: 5
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303
> < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304
>> SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311
>
> Signed-off-by: Kiran K <kiran.k@intel.com>
> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
> ---
> net/bluetooth/hci_event.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-07 8:33 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08 17:01 [PATCH v1] Bluetooth: Fix alt settings for incoming SCO with transparent coding format Kiran K
2021-04-08 17:53 ` [v1] " bluez.test.bot
2021-04-14 6:04 ` [PATCH v1] " K, Kiran
2021-05-07 8:33 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).