Linux-Bluetooth Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses
@ 2019-02-08 15:25 Josua Mayer
  2019-02-08 15:25 ` [PATCH 1/3] bluetooth: 6lowpan: search for destination address in all peers Josua Mayer
                   ` (5 more replies)
  0 siblings, 6 replies; 20+ messages in thread
From: Josua Mayer @ 2019-02-08 15:25 UTC (permalink / raw)
  To: linux-bluetooth; +Cc: Josua Mayer

Dear maintainers,

This patch set deals with an issue I reported earlier this year, where
1) packets addressed to a non-link-local address
2) any packets when at least 2 peers are connected
were not delivered if they matched a direct peer i.e. no routing.

The full explanation of the issue including steps to reproduce are:
https://www.spinics.net/lists/linux-bluetooth/msg78486.html

Please comment if I am on the right track here, especially on the
second patch in this series where I am nto completely sure if I found
the right api call to the neighbour cache.

Josua Mayer (3):
  bluetooth: 6lowpan: search for destination address in all peers
  bluetooth: 6lowpan: check neighbour table for SLAAC
  bluetooth: 6lowpan: always check destination address

 net/bluetooth/6lowpan.c | 40 ++++++++++++++++++++++++----------------
 1 file changed, 24 insertions(+), 16 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, back to index

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-08 15:25 [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses Josua Mayer
2019-02-08 15:25 ` [PATCH 1/3] bluetooth: 6lowpan: search for destination address in all peers Josua Mayer
2019-02-08 15:25 ` [PATCH 2/3] bluetooth: 6lowpan: check neighbour table for SLAAC Josua Mayer
2019-03-07 10:41   ` Johan Hedberg
2019-03-12 16:23     ` Josua Mayer
2019-02-08 15:25 ` [PATCH 3/3] bluetooth: 6lowpan: always check destination address Josua Mayer
2019-02-28 20:00 ` [PATCH 0/3] bluetooth: 6lowpan: multiple peers and addresses Josua Mayer
2019-02-28 20:30   ` Michael Scott
2019-03-06 18:10     ` Michael Scott
2019-03-07  9:16       ` Jukka Rissanen
2019-03-12 19:16 ` [PATCH v2 " Josua Mayer
2019-03-12 19:16   ` [PATCH v2 1/3] bluetooth: 6lowpan: search for destination address in all peers Josua Mayer
2019-03-12 19:16   ` [PATCH v2 2/3] bluetooth: 6lowpan: check neighbour table for SLAAC Josua Mayer
2019-03-12 19:16   ` [PATCH v2 3/3] bluetooth: 6lowpan: always check destination address Josua Mayer
2019-03-30 15:51   ` [PATCH v2 0/3] bluetooth: 6lowpan: multiple peers and addresses Josua Mayer
2019-05-13 10:11   ` [PATCH RESEND v2 1/3] bluetooth: 6lowpan: search for destination address in all peers Josua Mayer
2019-05-13 10:12   ` [PATCH RESEND v2 3/3] bluetooth: 6lowpan: always check destination address Josua Mayer
2019-05-13 10:12   ` [PATCH RESEND v2 2/3] bluetooth: 6lowpan: check neighbour table for SLAAC Josua Mayer
2019-05-13 10:11 ` [PATCH RESEND v2 0/3] bluetooth: 6lowpan: multiple peers and addresses Josua Mayer
2019-07-06 11:11   ` Marcel Holtmann

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git