Linux-Bluetooth Archive on lore.kernel.org
 help / Atom feed
* [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address
@ 2018-12-28 12:07 Balakrishna Godavarthi
  2019-01-07 14:46 ` Balakrishna Godavarthi
  0 siblings, 1 reply; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-12-28 12:07 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
	Balakrishna Godavarthi

This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
 drivers/bluetooth/btqca.h   |  8 +++++++-
 drivers/bluetooth/hci_qca.c |  5 ++++-
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup);
 
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
 
 #define EDL_PATCH_CMD_OPCODE		(0xFC00)
 #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
 	return -EOPNOTSUPP;
 }
 
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
 
 	return ret;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address
  2018-12-28 12:07 [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address Balakrishna Godavarthi
@ 2019-01-07 14:46 ` Balakrishna Godavarthi
  0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2019-01-07 14:46 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm

Hi Marcel,

On 2018-12-28 17:37, Balakrishna Godavarthi wrote:
> This patch add qca_set_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
> 
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>  drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
>  drivers/bluetooth/btqca.h   |  8 +++++++-
>  drivers/bluetooth/hci_qca.c |  5 ++++-
>  3 files changed, 30 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ec9e03a6b778..612268574fc7 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
> baudrate,
>  }
>  EXPORT_SYMBOL_GPL(qca_uart_setup);
> 
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> +{
> +	struct sk_buff *skb;
> +	int err;
> +
> +	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
> +				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
> +		return err;
> +	}
> +
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(qca_set_bdaddr);
> +
>  MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
>  MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver
> " VERSION);
>  MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 0c01f375fe83..c72c56ea7480 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -20,6 +20,7 @@
> 
>  #define EDL_PATCH_CMD_OPCODE		(0xFC00)
>  #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
> +#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
>  #define EDL_PATCH_CMD_LEN		(1)
>  #define EDL_PATCH_VER_REQ_CMD		(0x19)
>  #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
> @@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
> const bdaddr_t *bdaddr);
>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  		   enum qca_btsoc_type soc_type, u32 soc_ver);
>  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
> -
> +int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>  #else
> 
>  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const
> bdaddr_t *bdaddr)
> @@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct
> hci_dev *hdev, u32 *soc_version)
>  	return -EOPNOTSUPP;
>  }
> 
> +static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t 
> *bdaddr)
> +{
> +	return -EOPNOTSUPP;
> +}
> +
>  #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f036c8f98ea3..53ac5ade532b 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
>  	}
> 
>  	/* Setup bdaddr */
> -	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> +	if (qcadev->btsoc_type == QCA_WCN3990)
> +		hu->hdev->set_bdaddr = qca_set_bdaddr;
> +	else
> +		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> 
>  	return ret;
>  }


Can you pls review this change.

-- 
Regards
Balakrishna.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
  2019-01-16 12:31 [RESEND " Balakrishna Godavarthi
@ 2019-01-18  9:10 ` Marcel Holtmann
  0 siblings, 0 replies; 6+ messages in thread
From: Marcel Holtmann @ 2019-01-18  9:10 UTC (permalink / raw)
  To: Balakrishna Godavarthi
  Cc: Johan Hedberg, mka, linux-kernel, linux-bluetooth, hemantg,
	linux-arm-msm

Hi Balakrishna,

> This patch add qca_set_bdaddr() to set the device
> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
> 
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
> drivers/bluetooth/btqca.h   |  8 +++++++-
> drivers/bluetooth/hci_qca.c |  5 ++++-
> 3 files changed, 30 insertions(+), 2 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
@ 2019-01-16 12:31 " Balakrishna Godavarthi
  2019-01-18  9:10 ` Marcel Holtmann
  0 siblings, 1 reply; 6+ messages in thread
From: Balakrishna Godavarthi @ 2019-01-16 12:31 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
	Balakrishna Godavarthi

This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
 drivers/bluetooth/btqca.h   |  8 +++++++-
 drivers/bluetooth/hci_qca.c |  5 ++++-
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup);
 
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
 
 #define EDL_PATCH_CMD_OPCODE		(0xFC00)
 #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
 	return -EOPNOTSUPP;
 }
 
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
 
 	return ret;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address
@ 2018-12-11 15:34 Balakrishna Godavarthi
  0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-12-11 15:34 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
	Balakrishna Godavarthi

This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
 drivers/bluetooth/btqca.h   |  8 +++++++-
 drivers/bluetooth/hci_qca.c |  5 ++++-
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup);
 
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
 
 #define EDL_PATCH_CMD_OPCODE		(0xFC00)
 #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
 	return -EOPNOTSUPP;
 }
 
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
 
 	return ret;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [RESEND v2] Bluetooth: hci_qca: Add helper to set device address.
@ 2018-11-14 12:34 Balakrishna Godavarthi
  0 siblings, 0 replies; 6+ messages in thread
From: Balakrishna Godavarthi @ 2018-11-14 12:34 UTC (permalink / raw)
  To: marcel, johan.hedberg
  Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
	Balakrishna Godavarthi

This patch add qca_set_bdaddr() to set the device
address for latest Qualcomm Bluetooth chipset wcn3990 and above.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/bluetooth/btqca.c   | 19 +++++++++++++++++++
 drivers/bluetooth/btqca.h   |  8 +++++++-
 drivers/bluetooth/hci_qca.c |  5 ++++-
 3 files changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ec9e03a6b778..612268574fc7 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -391,6 +391,25 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup);
 
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 0c01f375fe83..c72c56ea7480 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -20,6 +20,7 @@
 
 #define EDL_PATCH_CMD_OPCODE		(0xFC00)
 #define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
 #define EDL_PATCH_CMD_LEN		(1)
 #define EDL_PATCH_VER_REQ_CMD		(0x19)
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
@@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
-
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -159,4 +160,9 @@ static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version)
 	return -EOPNOTSUPP;
 }
 
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
 #endif
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f036c8f98ea3..53ac5ade532b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	if (qcadev->btsoc_type == QCA_WCN3990)
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
 
 	return ret;
 }
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-28 12:07 [RESEND, v2] Bluetooth: hci_qca: Add helper to set device address Balakrishna Godavarthi
2019-01-07 14:46 ` Balakrishna Godavarthi
  -- strict thread matches above, loose matches on Subject: below --
2019-01-16 12:31 [RESEND " Balakrishna Godavarthi
2019-01-18  9:10 ` Marcel Holtmann
2018-12-11 15:34 Balakrishna Godavarthi
2018-11-14 12:34 Balakrishna Godavarthi

Linux-Bluetooth Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-bluetooth/0 linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ https://lore.kernel.org/linux-bluetooth \
		linux-bluetooth@vger.kernel.org linux-bluetooth@archiver.kernel.org
	public-inbox-index linux-bluetooth


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-bluetooth


AGPL code for this site: git clone https://public-inbox.org/ public-inbox