Linux-Bluetooth Archive on
 help / color / Atom feed
* [PATCH BlueZ 0/1] mesh: Add strings for SIG Model IDs.
@ 2020-08-01  4:28 Michael N. Moran
  0 siblings, 0 replies; only message in thread
From: Michael N. Moran @ 2020-08-01  4:28 UTC (permalink / raw)
  To: linux-bluetooth

My first BlueZ patch.

This patch adds a utility function returning a string
describing a SIG Model ID and uses this function
for in the mesh-cfgclient in the list-nodes command
output and in the display of received composition data.

The strings were taken directly from the Bluetooth Mesh Profile
and Mesh Model specifications.

Michael N. Moran (1):
   Add strings for SIG Model IDs.

  tools/mesh/cfgcli.c |  3 ++-
  tools/mesh/remote.c |  5 ++--
  tools/mesh/util.c   | 64 
  tools/mesh/util.h   |  1 +
  4 files changed, 70 insertions(+), 3 deletions(-)


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-01  4:28 [PATCH BlueZ 0/1] mesh: Add strings for SIG Model IDs Michael N. Moran

Linux-Bluetooth Archive on

Archives are clonable:
	git clone --mirror linux-bluetooth/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-bluetooth linux-bluetooth/ \
	public-inbox-index linux-bluetooth

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone