linux-btrfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Cannot mount hm-smr drive with btrfs
@ 2021-07-30 13:19 Aleksey Utkin
  0 siblings, 0 replies; 4+ messages in thread
From: Aleksey Utkin @ 2021-07-30 13:19 UTC (permalink / raw)
  To: linux-btrfs

[-- Attachment #1: Type: text/plain, Size: 3419 bytes --]

Hello.


I had a problem with the mounting of the BTRFS file system.

Test case description:

1. Operation: Creating btrfs: sudo mkfs.btrfs -O zoned -d single -m 
single -f /dev/sdb
Result: The file system was created successfully

2. Operation: Mount new btrfs: sudo mount /dev/sdb /mnt/sdb
Result: Mounted successfully

3. Operation: Filling a file system data system (copy using MC)
Result: Filling a file system data has passed successfully, the data has 
passed integrity control

4. Operation: Umount file system: sudo umount /mnt/sdb/
Result: Umounted successfully

5. Operation: Mount btrfs: sudo mount /dev/sdb /mnt/sdb
Result: Mounted successfully

6. Operation: rebooted the host with mounted file system BTRFS
Result: Reboot successfully

7. Operation: Checking the btrfs file system: sudo btrfs check /dev/sdb
Result: successfully, console output:
Opening filesystem to check...
Checking filesystem on /dev/sdb
UUID: 4312bf2a-376d-4a44-a69a-6bb112b124f6
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 17978056441856 bytes used, no error found
total csum bytes: 17534343280
total tree bytes: 22888923136
total fs tree bytes: 2191491072
total extent tree bytes: 2166554624
btree space waste bytes: 990047274
file data blocks allocated: 17955167518720
  referenced 17955167518720

8. Operation: Attempt to mount 1: sudo mount /dev/sdb /mnt/sdb
Result: Mounted unsuccessful,
Console output: mount: /mnt/sdb: wrong fs type, bad option, bad 
superblock on /dev/sdb, missing codepage or helper program, or other error.

9. Operation: Attempt to mount 2: sudo mount -t btrfs /dev/sdb /mnt/sdb
Result: unsuccessful, no messages, the HDD activity LED is glow, the 
console frozen, ^C does not interrupt the mount operation, the sudo 
reboot is not performed, the restart of Alt+PRTSCR+B is performed.

Version of the kernel:
$ uname -a
Linux x79zd3 5.14.0-051400rc2-generic #202107182230 SMP Sun Jul 18 
22:34:12 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

$ btrfs --version
btrfs-progs v5.13
from https://github.com/kdave/btrfs-progs

$ btrfs fi show
nothing output

$ btrfs fi df /mnt/sdb
ERROR: not a btrfs filesystem: /mnt/sdb

Device:
$ sudo smartctl -i /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-051400rc2-generic] 
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST18000NM009J-2UW101
Serial Number:    ZL2BH53L
LU WWN Device Id: 5 000c50 0c812bf64
Firmware Version: SE01
User Capacity:    18 000 207 937 536 bytes [18,0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jul 30 14:47:33 2021 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

# nc cwillu.com 10101 < /dev/kmsg
after operations 6,7,8,9 - http://cwillu.com:8080/128.0.141.47/2

$ sudo dmesg | nc termbin.com 9999
https://termbin.com/6g54


Best regards,
Aleksey Utkin


[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 73471 bytes --]

[    0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14
[    0.000000] Linux version 5.14.0-051400rc2-generic (kernel@kathleen) (gcc (Ubuntu 10.3.0-6ubuntu1) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.36.90.20210712) #202107182230 SMP Sun Jul 18 22:34:12 UTC 2021
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-051400rc2-generic root=UUID=957581cc-6dd3-4cf5-8363-7c84a7a0aa4e ro quiet splash libata.force=3.0 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000953ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000095400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ba49fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ba4a000-0x000000007bbf5fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bbf6000-0x000000007bee5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007bee6000-0x000000007c7d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c7d4000-0x000000007cc98fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cc99000-0x000000007cffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./X79-ZD3, BIOS 4.6.5 12/24/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2600.147 MHz processor
[    0.001398] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001402] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001408] last_pfn = 0x1080000 max_arch_pfn = 0x400000000
[    0.001564] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002520] total RAM covered: 65504M
[    0.002846] Found optimal setting for mtrr clean up
[    0.002847]  gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
[    0.003330] e820: update [mem 0x7e000000-0xffffffff] usable ==> reserved
[    0.003334] last_pfn = 0x7ba4a max_arch_pfn = 0x400000000
[    0.014791] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf]
[    0.014810] Using GB pages for direct mapping
[    0.015086] RAMDISK: [mem 0x30653000-0x34320fff]
[    0.015093] ACPI: Early table checksum verification disabled
[    0.015097] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.015102] ACPI: XSDT 0x000000007BE06080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.015109] ACPI: FACP 0x000000007BE0EC70 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.015116] ACPI: DSDT 0x000000007BE06190 008AD9 (v02 ALASKA A M I    00000017 INTL 20051117)
[    0.015120] ACPI: FACS 0x000000007BEDDF80 000040
[    0.015123] ACPI: APIC 0x000000007BE0ED80 000138 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.015127] ACPI: FPDT 0x000000007BE0EEB8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.015131] ACPI: FIDT 0x000000007BE0EF00 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.015134] ACPI: MCFG 0x000000007BE0EFA0 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
[    0.015139] ACPI: HPET 0x000000007BE0EFE0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.015142] ACPI: SSDT 0x000000007BE0F018 0CD380 (v02 INTEL  CpuPm    00004000 INTL 20051117)
[    0.015146] ACPI: EINJ 0x000000007BEDC398 000130 (v01 AMI    AMI EINJ 00000000      00000000)
[    0.015150] ACPI: ERST 0x000000007BEDC4C8 000230 (v01 AMIER  AMI ERST 00000000      00000000)
[    0.015154] ACPI: HEST 0x000000007BEDC6F8 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
[    0.015158] ACPI: BERT 0x000000007BEDC7A0 000030 (v01 AMI    AMI BERT 00000000      00000000)
[    0.015160] ACPI: Reserving FACP table memory at [mem 0x7be0ec70-0x7be0ed7b]
[    0.015162] ACPI: Reserving DSDT table memory at [mem 0x7be06190-0x7be0ec68]
[    0.015163] ACPI: Reserving FACS table memory at [mem 0x7beddf80-0x7beddfbf]
[    0.015165] ACPI: Reserving APIC table memory at [mem 0x7be0ed80-0x7be0eeb7]
[    0.015166] ACPI: Reserving FPDT table memory at [mem 0x7be0eeb8-0x7be0eefb]
[    0.015167] ACPI: Reserving FIDT table memory at [mem 0x7be0ef00-0x7be0ef9b]
[    0.015168] ACPI: Reserving MCFG table memory at [mem 0x7be0efa0-0x7be0efdb]
[    0.015169] ACPI: Reserving HPET table memory at [mem 0x7be0efe0-0x7be0f017]
[    0.015170] ACPI: Reserving SSDT table memory at [mem 0x7be0f018-0x7bedc397]
[    0.015171] ACPI: Reserving EINJ table memory at [mem 0x7bedc398-0x7bedc4c7]
[    0.015172] ACPI: Reserving ERST table memory at [mem 0x7bedc4c8-0x7bedc6f7]
[    0.015173] ACPI: Reserving HEST table memory at [mem 0x7bedc6f8-0x7bedc79f]
[    0.015174] ACPI: Reserving BERT table memory at [mem 0x7bedc7a0-0x7bedc7cf]
[    0.015231] No NUMA configuration found
[    0.015232] Faking a node at [mem 0x0000000000000000-0x000000107fffffff]
[    0.015244] NODE_DATA(0) allocated [mem 0x107ffd6000-0x107fffffff]
[    0.015759] Zone ranges:
[    0.015761]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.015763]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.015765]   Normal   [mem 0x0000000100000000-0x000000107fffffff]
[    0.015767]   Device   empty
[    0.015768] Movable zone start for each node
[    0.015772] Early memory node ranges
[    0.015773]   node   0: [mem 0x0000000000001000-0x0000000000094fff]
[    0.015774]   node   0: [mem 0x0000000000100000-0x000000007ba49fff]
[    0.015776]   node   0: [mem 0x0000000100000000-0x000000107fffffff]
[    0.015784] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
[    0.015790] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.015832] On node 0, zone DMA: 107 pages in unavailable ranges
[    0.198311] On node 0, zone Normal: 17846 pages in unavailable ranges
[    0.198615] ACPI: PM-Timer IO Port: 0x408
[    0.198628] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.198630] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.198632] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.198633] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.198633] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.198634] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.198635] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.198636] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.198637] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.198638] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.198639] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.198640] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.198641] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.198642] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.198643] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.198644] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.198656] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.198662] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[    0.198664] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.198667] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.198672] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.198674] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.198680] TSC deadline timer available
[    0.198681] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[    0.198696] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.198698] PM: hibernation: Registered nosave memory: [mem 0x00095000-0x00095fff]
[    0.198699] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x0009ffff]
[    0.198701] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.198701] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.198703] PM: hibernation: Registered nosave memory: [mem 0x7ba4a000-0x7bbf5fff]
[    0.198704] PM: hibernation: Registered nosave memory: [mem 0x7bbf6000-0x7bee5fff]
[    0.198705] PM: hibernation: Registered nosave memory: [mem 0x7bee6000-0x7c7d3fff]
[    0.198706] PM: hibernation: Registered nosave memory: [mem 0x7c7d4000-0x7cc98fff]
[    0.198707] PM: hibernation: Registered nosave memory: [mem 0x7cc99000-0x7cffffff]
[    0.198708] PM: hibernation: Registered nosave memory: [mem 0x7d000000-0x7fffffff]
[    0.198709] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[    0.198710] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
[    0.198711] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[    0.198712] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[    0.198713] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.198715] [mem 0x90000000-0xfed1bfff] available for PCI devices
[    0.198717] Booting paravirtualized kernel on bare hardware
[    0.198720] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.198728] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.199204] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u262144
[    0.199211] pcpu-alloc: s196608 r8192 d28672 u262144 alloc=1*2097152
[    0.199214] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.199252] Built 1 zonelists, mobility grouping on.  Total pages: 16497248
[    0.199254] Policy zone: Normal
[    0.199256] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-051400rc2-generic root=UUID=957581cc-6dd3-4cf5-8363-7c84a7a0aa4e ro quiet splash libata.force=3.0 vt.handoff=7
[    0.199341] Unknown command line parameters: splash BOOT_IMAGE=/boot/vmlinuz-5.14.0-051400rc2-generic
[    0.204504] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
[    0.207233] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.207422] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.382588] Memory: 65713764K/67037048K available (16393K kernel code, 3518K rwdata, 10596K rodata, 2900K init, 5716K bss, 1323024K reserved, 0K cma-reserved)
[    0.382597] random: get_random_u64 called from kmem_cache_open+0x23/0x230 with crng_init=0
[    0.382779] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.382795] Kernel/User page tables isolation: enabled
[    0.382822] ftrace: allocating 52116 entries in 204 pages
[    0.402267] ftrace: allocated 204 pages with 4 groups
[    0.402420] rcu: Hierarchical RCU implementation.
[    0.402422] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.402424] 	Rude variant of Tasks RCU enabled.
[    0.402424] 	Tracing variant of Tasks RCU enabled.
[    0.402425] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.402426] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.407348] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
[    0.407588] random: crng done (trusting CPU's manufacturer)
[    0.407621] Console: colour dummy device 80x25
[    0.407635] printk: console [tty0] enabled
[    0.407662] ACPI: Core revision 20210604
[    0.408426] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.408453] APIC: Switch to symmetric I/O mode setup
[    0.408546] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.408592] Switched APIC routing to physical flat.
[    0.409076] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.428441] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257ac6bd610, max_idle_ns: 440795231169 ns
[    0.428448] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.29 BogoMIPS (lpj=10400588)
[    0.428451] pid_max: default: 32768 minimum: 301
[    0.428481] LSM: Security Framework initializing
[    0.428492] Yama: becoming mindful.
[    0.428516] AppArmor: AppArmor initialized
[    0.428672] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.428809] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.429100] CPU0: Thermal monitoring enabled (TM1)
[    0.429173] process: using mwait in idle threads
[    0.429176] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.429177] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
[    0.429181] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.429183] Spectre V2 : Mitigation: Full generic retpoline
[    0.429184] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.429185] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.429187] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.429188] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.429189] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.429192] MDS: Mitigation: Clear CPU buffers
[    0.434300] Freeing SMP alternatives memory: 40K
[    0.435967] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1220
[    0.435975] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (family: 0x6, model: 0x3e, stepping: 0x4)
[    0.436138] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.436147] ... version:                3
[    0.436148] ... bit width:              48
[    0.436148] ... generic registers:      4
[    0.436149] ... value mask:             0000ffffffffffff
[    0.436150] ... max period:             00007fffffffffff
[    0.436151] ... fixed-purpose events:   3
[    0.436152] ... event mask:             000000070000000f
[    0.436286] rcu: Hierarchical SRCU implementation.
[    0.436445] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.436445] smp: Bringing up secondary CPUs ...
[    0.436445] x86: Booting SMP configuration:
[    0.436445] .... node  #0, CPUs:        #1
[    0.440293] TSC synchronization [CPU#0 -> CPU#1]:
[    0.440298] Measured 182538 cycles TSC warp between CPUs, turning off TSC clock.
[    0.440300] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.440564]   #2  #3  #4  #5  #6  #7  #8
[    0.453589] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.453589]   #9 #10 #11 #12 #13 #14 #15
[    0.461407] smp: Brought up 1 node, 16 CPUs
[    0.461407] smpboot: Max logical packages: 1
[    0.461407] smpboot: Total of 16 processors activated (83204.70 BogoMIPS)
[    0.468188] devtmpfs: initialized
[    0.468188] x86/mm: Memory block size: 2048MB
[    0.468778] ACPI: PM: Registering ACPI NVS region [mem 0x7bbf6000-0x7bee5fff] (3080192 bytes)
[    0.468778] ACPI: PM: Registering ACPI NVS region [mem 0x7c7d4000-0x7cc98fff] (5001216 bytes)
[    0.468778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.468778] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.468778] pinctrl core: initialized pinctrl subsystem
[    0.468878] PM: RTC time: 12:55:31, date: 2021-07-30
[    0.469040] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.469468] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.469798] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.470126] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.470135] audit: initializing netlink subsys (disabled)
[    0.470144] audit: type=2000 audit(1627649731.064:1): state=initialized audit_enabled=0 res=1
[    0.470144] thermal_sys: Registered thermal governor 'fair_share'
[    0.470144] thermal_sys: Registered thermal governor 'bang_bang'
[    0.470144] thermal_sys: Registered thermal governor 'step_wise'
[    0.470144] thermal_sys: Registered thermal governor 'user_space'
[    0.470144] thermal_sys: Registered thermal governor 'power_allocator'
[    0.470144] EISA bus registered
[    0.470144] cpuidle: using governor ladder
[    0.470144] cpuidle: using governor menu
[    0.470144] ACPI: bus type PCI registered
[    0.470144] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.470144] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[    0.470144] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
[    0.470144] PCI: Using configuration type 1 for base access
[    0.470144] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.472955] Kprobes globally optimized
[    0.472961] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.472961] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.472961] ACPI: PRMT not present
[    0.472961] PRM: found 4294967277 modules
[    0.472961] ACPI: Added _OSI(Module Device)
[    0.472961] ACPI: Added _OSI(Processor Device)
[    0.472961] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.472961] ACPI: Added _OSI(Processor Aggregator Device)
[    0.472961] ACPI: Added _OSI(Linux-Dell-Video)
[    0.472961] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.472961] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.664728] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.691092] ACPI: Interpreter enabled
[    0.691112] ACPI: PM: (supports S0 S1 S4 S5)
[    0.691113] ACPI: Using IOAPIC for interrupt routing
[    0.691201] HEST: Table parsing has been initialized.
[    0.691205] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.691832] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.713796] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.713804] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.714032] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.714244] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.714667] PCI host bridge to bus 0000:00
[    0.714669] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.714672] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.714673] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.714674] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.714676] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.714678] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.714679] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]
[    0.714681] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.714706] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
[    0.714782] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.714916] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
[    0.715004] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.715180] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400
[    0.715266] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.715432] pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
[    0.715519] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.715685] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
[    0.715720] pci 0000:00:03.0: enabling Extended Tags
[    0.715778] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.715940] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
[    0.716088] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
[    0.716231] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
[    0.716243] pci 0000:00:05.4: reg 0x10: [mem 0xfb408000-0xfb408fff]
[    0.716406] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[    0.716514] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[    0.716683] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[    0.716699] pci 0000:00:1a.0: reg 0x10: [mem 0xfb407000-0xfb4073ff]
[    0.716782] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.716904] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
[    0.716921] pci 0000:00:1b.0: reg 0x10: [mem 0xfb400000-0xfb403fff 64bit]
[    0.716997] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.717099] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[    0.717188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.717326] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
[    0.717415] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.717550] pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
[    0.717639] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.717778] pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
[    0.717867] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.718009] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[    0.718025] pci 0000:00:1d.0: reg 0x10: [mem 0xfb406000-0xfb4063ff]
[    0.718108] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.718226] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.718392] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[    0.718605] pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400
[    0.718618] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.718625] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.718632] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.718640] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.718647] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.718654] pci 0000:00:1f.2: reg 0x24: [mem 0xfb405000-0xfb4057ff]
[    0.718693] pci 0000:00:1f.2: PME# supported from D3hot
[    0.718805] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[    0.718822] pci 0000:00:1f.3: reg 0x10: [mem 0xfb404000-0xfb4040ff 64bit]
[    0.718842] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.718995] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.719036] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.719078] pci 0000:00:02.0: PCI bridge to [bus 03]
[    0.719131] pci 0000:04:00.0: [10de:1c02] type 00 class 0x030000
[    0.719142] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.719152] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.719162] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.719168] pci 0000:04:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.719175] pci 0000:04:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.719181] pci 0000:04:00.0: enabling Extended Tags
[    0.719270] pci 0000:04:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    0.719315] pci 0000:04:00.1: [10de:10f1] type 00 class 0x040300
[    0.719326] pci 0000:04:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.719362] pci 0000:04:00.1: enabling Extended Tags
[    0.719459] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.719462] pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
[    0.719466] pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.719470] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.719512] pci 0000:00:11.0: PCI bridge to [bus 05]
[    0.719559] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.719634] pci 0000:07:00.0: [8086:2526] type 00 class 0x028000
[    0.719669] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb303fff 64bit]
[    0.719847] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.719972] pci 0000:00:1c.1: PCI bridge to [bus 07]
[    0.719978] pci 0000:00:1c.1:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.720052] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
[    0.720077] pci 0000:08:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.720110] pci 0000:08:00.0: reg 0x18: [mem 0xfb204000-0xfb204fff 64bit]
[    0.720131] pci 0000:08:00.0: reg 0x20: [mem 0xfb200000-0xfb203fff 64bit]
[    0.720263] pci 0000:08:00.0: supports D1 D2
[    0.720264] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.720411] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.720414] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.720418] pci 0000:00:1c.2:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.720482] pci 0000:09:00.0: [1106:3483] type 00 class 0x0c0330
[    0.720511] pci 0000:09:00.0: reg 0x10: [mem 0xfb100000-0xfb100fff 64bit]
[    0.720634] pci 0000:09:00.0: PME# supported from D0 D3cold
[    0.720720] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.720725] pci 0000:00:1c.3:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.720746] pci_bus 0000:0a: extended config space not accessible
[    0.720795] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.720804] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.720806] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.720807] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.720809] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.720810] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.720812] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.720813] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode)
[    0.721412] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[    0.721418] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.721451] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.721523] PCI host bridge to bus 0000:ff
[    0.721525] pci_bus 0000:ff: root bus resource [bus ff]
[    0.721537] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
[    0.721593] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
[    0.721643] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
[    0.721690] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
[    0.721733] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
[    0.721777] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
[    0.721821] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
[    0.721861] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
[    0.721907] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
[    0.721948] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
[    0.721992] pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
[    0.722032] pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
[    0.722074] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
[    0.722116] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
[    0.722156] pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
[    0.722197] pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
[    0.722244] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
[    0.722289] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
[    0.722339] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
[    0.722399] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
[    0.722458] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
[    0.722518] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
[    0.722579] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
[    0.722638] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
[    0.722702] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
[    0.722763] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
[    0.722823] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
[    0.722882] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
[    0.722940] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
[    0.723000] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
[    0.723060] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
[    0.723119] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
[    0.723181] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
[    0.723222] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
[    0.723265] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
[    0.723308] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
[    0.723353] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
[    0.723394] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
[    0.723435] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
[    0.723626] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.723697] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.723766] ACPI: PCI: Interrupt link LNKC configured for IRQ 3
[    0.723835] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.723903] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.723971] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.724040] ACPI: PCI: Interrupt link LNKG configured for IRQ 5
[    0.724108] ACPI: PCI: Interrupt link LNKH configured for IRQ 7
[    0.726383] iommu: Default domain type: Translated 
[    0.726383] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.726383] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.726383] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.726383] vgaarb: loaded
[    0.726383] SCSI subsystem initialized
[    0.726383] libata version 3.00 loaded.
[    0.726383] ACPI: bus type USB registered
[    0.726383] usbcore: registered new interface driver usbfs
[    0.726383] usbcore: registered new interface driver hub
[    0.726383] usbcore: registered new device driver usb
[    0.726383] pps_core: LinuxPPS API ver. 1 registered
[    0.726383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.726383] PTP clock support registered
[    0.726383] EDAC MC: Ver: 3.0.0
[    0.726383] NetLabel: Initializing
[    0.726383] NetLabel:  domain hash size = 128
[    0.726383] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.726383] NetLabel:  unlabeled traffic allowed by default
[    0.726383] PCI: Using ACPI for IRQ routing
[    0.733398] PCI: pci_cache_line_size set to 64 bytes
[    0.733492] e820: reserve RAM buffer [mem 0x00095400-0x0009ffff]
[    0.733495] e820: reserve RAM buffer [mem 0x7ba4a000-0x7bffffff]
[    0.733501] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.733501] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.736504] clocksource: Switched to clocksource hpet
[    0.747155] VFS: Disk quotas dquot_6.6.0
[    0.747174] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.747295] AppArmor: AppArmor Filesystem Enabled
[    0.747336] pnp: PnP ACPI init
[    0.747446] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.747450] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.747452] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
[    0.747454] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[    0.747455] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
[    0.747457] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
[    0.747693] system 00:01: [io  0x0a00-0x0a0f] has been reserved
[    0.747696] system 00:01: [io  0x0a10-0x0a1f] has been reserved
[    0.747697] system 00:01: [io  0x0a20-0x0a2f] has been reserved
[    0.748000] pnp 00:02: [dma 0 disabled]
[    0.748150] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.748467] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.748469] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.748474] system 00:05: [io  0x1180-0x119f] has been reserved
[    0.748475] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.748477] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.748479] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.748481] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.748483] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.748583] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.749135] pnp: PnP ACPI: found 7 devices
[    0.755267] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.755331] NET: Registered PF_INET protocol family
[    0.755554] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.757886] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.758341] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.759047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.759128] TCP: Hash tables configured (established 524288 bind 65536)
[    0.759376] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear)
[    0.759694] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.759894] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.760064] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.760070] NET: Registered PF_XDP protocol family
[    0.760087] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.760098] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.760107] pci 0000:00:02.0: PCI bridge to [bus 03]
[    0.760116] pci 0000:00:03.0: PCI bridge to [bus 04]
[    0.760118] pci 0000:00:03.0:   bridge window [io  0xe000-0xefff]
[    0.760122] pci 0000:00:03.0:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.760125] pci 0000:00:03.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.760130] pci 0000:00:11.0: PCI bridge to [bus 05]
[    0.760142] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.760153] pci 0000:00:1c.1: PCI bridge to [bus 07]
[    0.760157] pci 0000:00:1c.1:   bridge window [mem 0xfb300000-0xfb3fffff]
[    0.760164] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.760167] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.760171] pci 0000:00:1c.2:   bridge window [mem 0xfb200000-0xfb2fffff]
[    0.760179] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.760183] pci 0000:00:1c.3:   bridge window [mem 0xfb100000-0xfb1fffff]
[    0.760190] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.760201] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.760203] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.760204] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.760206] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.760207] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.760209] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.760210] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfbffffff window]
[    0.760212] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.760214] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.760215] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.760217] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff]
[    0.760219] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.760220] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff]
[    0.760222] pci_bus 0000:09: resource 1 [mem 0xfb100000-0xfb1fffff]
[    0.760223] pci_bus 0000:0a: resource 4 [io  0x0000-0x03af window]
[    0.760225] pci_bus 0000:0a: resource 5 [io  0x03e0-0x0cf7 window]
[    0.760226] pci_bus 0000:0a: resource 6 [io  0x03b0-0x03df window]
[    0.760227] pci_bus 0000:0a: resource 7 [io  0x0d00-0xffff window]
[    0.760229] pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.760230] pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.760232] pci_bus 0000:0a: resource 10 [mem 0x80000000-0xfbffffff window]
[    0.760314] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28]
[    0.784564] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x120 took 23668 usecs
[    0.808559] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x120 took 23409 usecs
[    0.808585] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.808617] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[    0.808869] PCI: CLS 64 bytes, default 64
[    0.808877] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.808878] software IO TLB: mapped [mem 0x0000000077a4a000-0x000000007ba4a000] (64MB)
[    0.808932] Trying to unpack rootfs image as initramfs...
[    0.809944] Initialise system trusted keyrings
[    0.809958] Key type blacklist registered
[    0.810002] workingset: timestamp_bits=36 max_order=24 bucket_order=0
[    0.811174] zbud: loaded
[    0.811496] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.811648] fuse: init (API version 7.34)
[    0.811819] integrity: Platform Keyring initialized
[    0.822867] Key type asymmetric registered
[    0.822871] Asymmetric key parser 'x509' registered
[    0.822889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.822945] io scheduler mq-deadline registered
[    0.823473] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[    0.823548] pcieport 0000:00:01.0: AER: enabled with IRQ 25
[    0.823777] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.823843] pcieport 0000:00:01.1: AER: enabled with IRQ 26
[    0.824066] pcieport 0000:00:02.0: PME: Signaling with IRQ 28
[    0.824140] pcieport 0000:00:02.0: AER: enabled with IRQ 28
[    0.824361] pcieport 0000:00:03.0: PME: Signaling with IRQ 30
[    0.824440] pcieport 0000:00:03.0: AER: enabled with IRQ 30
[    0.824664] pcieport 0000:00:11.0: PME: Signaling with IRQ 31
[    0.824736] pcieport 0000:00:11.0: AER: enabled with IRQ 31
[    0.824951] pcieport 0000:00:1c.0: PME: Signaling with IRQ 32
[    0.825145] pcieport 0000:00:1c.1: PME: Signaling with IRQ 33
[    0.825336] pcieport 0000:00:1c.2: PME: Signaling with IRQ 34
[    0.825452] pcieport 0000:00:1c.3: PME: Signaling with IRQ 35
[    0.825589] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.825656] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.825659] vesafb: scrolling: redraw
[    0.825660] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.825675] vesafb: framebuffer at 0xf1000000, mapped to 0x000000009bc8a364, using 1216k, total 1216k
[    0.825725] fbcon: Deferring console take-over
[    0.825726] fb0: VESA VGA frame buffer device
[    0.825866] Monitor-Mwait will be used to enter C-1 state
[    0.825870] Monitor-Mwait will be used to enter C-2 state
[    0.825874] ACPI: \_SB_.SCK0.C000: Found 2 idle states
[    0.828657] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.828701] ACPI: button: Power Button [PWRB]
[    0.828745] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.828771] ACPI: button: Power Button [PWRF]
[    0.852624] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.852630] pstore: Registered erst as persistent store backend
[    0.852755] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[    0.852928] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.873429] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.875961] Linux agpgart interface v0.103
[    0.886809] loop: module loaded
[    0.887186] libphy: Fixed MDIO Bus: probed
[    0.887188] tun: Universal TUN/TAP device driver, 1.6
[    0.887254] PPP generic driver version 2.4.2
[    0.887324] VFIO - User Level meta-driver version: 0.3
[    0.887460] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.887464] ehci-pci: EHCI PCI platform driver
[    0.887654] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.887662] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.887675] ehci-pci 0000:00:1a.0: debug port 2
[    0.891591] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb407000
[    0.904478] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.904547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.904551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.904552] usb usb1: Product: EHCI Host Controller
[    0.904554] usb usb1: Manufacturer: Linux 5.14.0-051400rc2-generic ehci_hcd
[    0.904555] usb usb1: SerialNumber: 0000:00:1a.0
[    0.904710] hub 1-0:1.0: USB hub found
[    0.904718] hub 1-0:1.0: 2 ports detected
[    0.905037] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.905044] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.905055] ehci-pci 0000:00:1d.0: debug port 2
[    0.908987] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb406000
[    0.924472] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.924538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    0.924541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.924543] usb usb2: Product: EHCI Host Controller
[    0.924544] usb usb2: Manufacturer: Linux 5.14.0-051400rc2-generic ehci_hcd
[    0.924546] usb usb2: SerialNumber: 0000:00:1d.0
[    0.924704] hub 2-0:1.0: USB hub found
[    0.924712] hub 2-0:1.0: 2 ports detected
[    0.924890] ehci-platform: EHCI generic platform driver
[    0.924908] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.924912] ohci-pci: OHCI PCI platform driver
[    0.924928] ohci-platform: OHCI generic platform driver
[    0.924934] uhci_hcd: USB Universal Host Controller Interface driver
[    0.924979] i8042: PNP: No PS/2 controller found.
[    0.925072] mousedev: PS/2 mouse device common for all mice
[    0.925188] rtc_cmos 00:03: RTC can wake from S4
[    0.925421] rtc_cmos 00:03: registered as rtc0
[    0.925496] rtc_cmos 00:03: setting system clock to 2021-07-30T12:55:31 UTC (1627649731)
[    0.925516] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.925525] i2c /dev entries driver
[    0.925869] device-mapper: uevent: version 1.0.3
[    0.925924] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.925950] platform eisa.0: Probing EISA bus 0
[    0.925953] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.925954] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.925956] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.925957] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.925958] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.925959] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.925961] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.925962] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.925963] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.925964] platform eisa.0: EISA: Detected 0 cards
[    0.925970] intel_pstate: Intel P-state driver initializing
[    0.927091] ledtrig-cpu: registered to indicate activity on CPUs
[    0.927230] drop_monitor: Initializing network drop monitor service
[    0.927399] NET: Registered PF_INET6 protocol family
[    0.965926] Freeing initrd memory: 62264K
[    0.976511] Segment Routing with IPv6
[    0.976543] NET: Registered PF_PACKET protocol family
[    0.976600] Key type dns_resolver registered
[    0.978127] microcode: sig=0x306e4, pf=0x1, revision=0x42e
[    0.978350] microcode: Microcode Update Driver: v2.2.
[    0.978356] IPI shorthand broadcast: enabled
[    0.978431] registered taskstats version 1
[    0.978680] Loading compiled-in X.509 certificates
[    0.979564] Loaded X.509 cert 'Build time autogenerated kernel key: 73e1e8ccf95978ddbf430f7d6ab7c5a583d39b43'
[    0.980329] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    0.981392] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    0.981395] blacklist: Loading compiled-in revocation X.509 certificates
[    0.981428] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    0.982206] zswap: loaded using pool lzo/zbud
[    0.982484] Key type ._fscrypt registered
[    0.982485] Key type .fscrypt registered
[    0.982486] Key type fscrypt-provisioning registered
[    0.982562] pstore: Using crash dump compression: deflate
[    0.985914] Key type encrypted registered
[    0.985920] AppArmor: AppArmor sha1 policy hashing enabled
[    0.985932] ima: No TPM chip found, activating TPM-bypass!
[    0.985938] Loading compiled-in module X.509 certificates
[    0.986681] Loaded X.509 cert 'Build time autogenerated kernel key: 73e1e8ccf95978ddbf430f7d6ab7c5a583d39b43'
[    0.986684] ima: Allocated hash algorithm: sha1
[    0.986693] ima: No architecture policies found
[    0.986702] evm: Initialising EVM extended attributes:
[    0.986703] evm: security.selinux
[    0.986704] evm: security.SMACK64
[    0.986705] evm: security.SMACK64EXEC
[    0.986706] evm: security.SMACK64TRANSMUTE
[    0.986707] evm: security.SMACK64MMAP
[    0.986707] evm: security.apparmor
[    0.986708] evm: security.ima
[    0.986709] evm: security.capability
[    0.986709] evm: HMAC attrs: 0x1
[    0.987042] PM:   Magic number: 13:424:937
[    0.987056] misc lightnvm: hash matches
[    0.987100] platform PNP0103:00: hash matches
[    0.987134] acpi PNP0103:00: hash matches
[    0.987289] RAS: Correctable Errors collector initialized.
[    0.987299] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    0.988775] Freeing unused decrypted memory: 2036K
[    0.989152] Freeing unused kernel image (initmem) memory: 2900K
[    1.036532] Write protecting the kernel read-only data: 30720k
[    1.037090] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.037461] Freeing unused kernel image (rodata/data gap) memory: 1692K
[    1.094449] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.094451] x86/mm: Checking user space page tables
[    1.147343] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.147348] Run /init as init process
[    1.147350]   with arguments:
[    1.147351]     /init
[    1.147352]     splash
[    1.147353]   with environment:
[    1.147354]     HOME=/
[    1.147355]     TERM=linux
[    1.147355]     BOOT_IMAGE=/boot/vmlinuz-5.14.0-051400rc2-generic
[    1.164467] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.184466] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.275251] xhci_hcd 0000:09:00.0: xHCI Host Controller
[    1.275263] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 3
[    1.275385] xhci_hcd 0000:09:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
[    1.275545] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.275801] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[    1.275805] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.275807] usb usb3: Product: xHCI Host Controller
[    1.275808] usb usb3: Manufacturer: Linux 5.14.0-051400rc2-generic xhci-hcd
[    1.275809] usb usb3: SerialNumber: 0000:09:00.0
[    1.275918] hub 3-0:1.0: USB hub found
[    1.275927] hub 3-0:1.0: 1 port detected
[    1.276085] xhci_hcd 0000:09:00.0: xHCI Host Controller
[    1.276090] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 4
[    1.276093] xhci_hcd 0000:09:00.0: Host supports USB 3.0 SuperSpeed
[    1.276152] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14
[    1.276155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276156] usb usb4: Product: xHCI Host Controller
[    1.276157] usb usb4: Manufacturer: Linux 5.14.0-051400rc2-generic xhci-hcd
[    1.276159] usb usb4: SerialNumber: 0000:09:00.0
[    1.276187] ahci 0000:00:1f.2: version 3.0
[    1.276246] hub 4-0:1.0: USB hub found
[    1.276257] hub 4-0:1.0: 4 ports detected
[    1.276589] i2c i2c-0: 4/8 memory slots populated (from DMI)
[    1.276592] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
[    1.286553] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl RAID mode
[    1.286559] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    1.294717] libphy: r8169: probed
[    1.294907] r8169 0000:08:00.0 eth0: RTL8168h/8111h, 00:e0:1d:68:2b:db, XID 541, IRQ 38
[    1.294912] r8169 0000:08:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.296018] r8169 0000:08:00.0 enp8s0: renamed from eth0
[    1.297003] scsi host0: ahci
[    1.297228] scsi host1: ahci
[    1.297471] scsi host2: ahci
[    1.297646] scsi host3: ahci
[    1.297840] scsi host4: ahci
[    1.297990] scsi host5: ahci
[    1.298034] ata1: DUMMY
[    1.298037] ata2: FORCE: PHY spd limit set to 3.0Gbps
[    1.298039] ata2: SATA max UDMA/133 abar m2048@0xfb405000 port 0xfb405180 irq 37
[    1.298041] ata3: FORCE: PHY spd limit set to 3.0Gbps
[    1.298042] ata3: SATA max UDMA/133 abar m2048@0xfb405000 port 0xfb405200 irq 37
[    1.298043] ata4: DUMMY
[    1.298044] ata5: DUMMY
[    1.298045] ata6: DUMMY
[    1.328820] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.328824] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.329092] hub 1-1:1.0: USB hub found
[    1.329141] hub 1-1:1.0: 6 ports detected
[    1.348761] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.348766] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.348915] hub 2-1:1.0: USB hub found
[    1.349010] hub 2-1:1.0: 8 ports detected
[    1.532512] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.611490] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[    1.615435] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[    1.617065] ata2.00: supports DRM functions and may not be fully accessible
[    1.617932] ata2.00: disabling queued TRIM support
[    1.617942] ata2.00: ATA-9: Samsung SSD 850 EVO M.2 250GB, EMT21B6Q, max UDMA/133
[    1.617945] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.620261] ata2.00: supports DRM functions and may not be fully accessible
[    1.620498] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    1.621030] ata2.00: disabling queued TRIM support
[    1.623068] ata2.00: configured for UDMA/133
[    1.623283] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.623678] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.623730] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.623743] sd 1:0:0:0: [sda] Write Protect is off
[    1.623745] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.623760] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.637349]  sda: sda1 sda2 sda3 < sda5 >
[    1.657052] sd 1:0:0:0: [sda] supports TCG Opal
[    1.657057] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.687107] usb 3-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    1.687117] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.687121] usb 3-1: Product: USB2.0 Hub
[    1.688383] hub 3-1:1.0: USB hub found
[    1.688655] hub 3-1:1.0: 4 ports detected
[    1.734846] usb 1-1.3: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
[    1.734850] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.867933] ata3.00: ATA-11: ST18000NM009J-2UW101, SE01, max UDMA/133
[    1.867938] ata3.00: 35156656128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.911607] ata3.00: configured for UDMA/133
[    1.911858] scsi 2:0:0:0: Direct-Access-ZBC ATA      ST18000NM009J-2U SE01 PQ: 0 ANSI: 7
[    1.912099] sd 2:0:0:0: Attached scsi generic sg1 type 20
[    1.912164] sd 2:0:0:0: [sdb] Host-managed zoned block device
[    1.912359] sd 2:0:0:0: [sdb] 35156656128 512-byte logical blocks: (18.0 TB/16.4 TiB)
[    1.912362] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.912375] sd 2:0:0:0: [sdb] Write Protect is off
[    1.912377] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.912394] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.067617] sd 2:0:0:0: [sdb] 67056 zones of 524288 logical blocks
[    2.106728] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.412450] raid6: sse2x4   gen() 13157 MB/s
[    2.480451] raid6: sse2x4   xor()  7140 MB/s
[    2.548450] raid6: sse2x2   gen() 13181 MB/s
[    2.616451] raid6: sse2x2   xor()  7256 MB/s
[    2.684451] raid6: sse2x1   gen() 11061 MB/s
[    2.752452] raid6: sse2x1   xor()  6585 MB/s
[    2.752453] raid6: using algorithm sse2x2 gen() 13181 MB/s
[    2.752454] raid6: .... xor() 7256 MB/s, rmw enabled
[    2.752456] raid6: using ssse3x2 recovery algorithm
[    2.753538] xor: automatically using best checksumming function   avx       
[    2.754542] async_tx: api initialized (async)
[    2.804419] fbcon: Taking over console
[    2.804505] Console: switching to colour frame buffer device 80x30
[    2.833057] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    2.978116] systemd[1]: Inserted module 'autofs4'
[    2.999241] systemd[1]: systemd 247.3-3ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    3.016577] systemd[1]: Detected architecture x86-64.
[    3.049537] systemd[1]: Set hostname to <x79zd3>.
[    4.214601] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    4.257329] systemd[1]: Queued start job for default target Graphical Interface.
[    4.274835] systemd[1]: Created slice system-modprobe.slice.
[    4.275222] systemd[1]: Created slice system-postfix.slice.
[    4.275574] systemd[1]: Created slice User and Session Slice.
[    4.275668] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.275863] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.275926] systemd[1]: Reached target Remote File Systems.
[    4.275950] systemd[1]: Reached target Slices.
[    4.276091] systemd[1]: Listening on multipathd control socket.
[    4.277060] systemd[1]: Listening on Syslog Socket.
[    4.277970] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.278045] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.278266] systemd[1]: Listening on Journal Audit Socket.
[    4.278388] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.278526] systemd[1]: Listening on Journal Socket.
[    4.278928] systemd[1]: Listening on udev Control Socket.
[    4.279043] systemd[1]: Listening on udev Kernel Socket.
[    4.279960] systemd[1]: Mounting Huge Pages File System...
[    4.280935] systemd[1]: Mounting POSIX Message Queue File System...
[    4.281996] systemd[1]: Mounting Kernel Debug File System...
[    4.282950] systemd[1]: Mounting Kernel Trace File System...
[    4.284578] systemd[1]: Starting Journal Service...
[    4.285850] systemd[1]: Starting Set the console keyboard layout...
[    4.287024] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.288061] systemd[1]: Starting Load Kernel Module configfs...
[    4.289201] systemd[1]: Starting Load Kernel Module drm...
[    4.290155] systemd[1]: Starting Load Kernel Module fuse...
[    4.290938] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.290987] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    4.293027] systemd[1]: Starting Load Kernel Modules...
[    4.294013] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.294978] systemd[1]: Starting Coldplug All udev Devices...
[    4.295926] systemd[1]: Starting Uncomplicated firewall...
[    4.298143] systemd[1]: Mounted Huge Pages File System.
[    4.298266] systemd[1]: Mounted POSIX Message Queue File System.
[    4.298372] systemd[1]: Mounted Kernel Debug File System.
[    4.298477] systemd[1]: Mounted Kernel Trace File System.
[    4.298966] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    4.299288] systemd[1]: modprobe@configfs.service: Succeeded.
[    4.299654] systemd[1]: Finished Load Kernel Module configfs.
[    4.299918] systemd[1]: modprobe@fuse.service: Succeeded.
[    4.300271] systemd[1]: Finished Load Kernel Module fuse.
[    4.300867] systemd[1]: Finished Uncomplicated firewall.
[    4.301913] systemd[1]: Mounting FUSE Control File System...
[    4.302925] systemd[1]: Mounting Kernel Configuration File System...
[    4.303797] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    4.305945] systemd[1]: modprobe@drm.service: Succeeded.
[    4.306329] systemd[1]: Finished Load Kernel Module drm.
[    4.306887] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.307038] systemd[1]: Mounted FUSE Control File System.
[    4.307146] systemd[1]: Mounted Kernel Configuration File System.
[    4.307995] systemd[1]: Activating swap /swapfile...
[    4.309195] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.309288] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.310147] systemd[1]: Starting Load/Save Random Seed...
[    4.311361] systemd[1]: Starting Create System Users...
[    4.313163] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[    4.313280] systemd[1]: Activated swap /swapfile.
[    4.313366] systemd[1]: Reached target Swap.
[    4.314880] lp: driver loaded but no devices found
[    4.318195] ppdev: user-space parallel port driver
[    4.321291] parport0: PC-style at 0x378 (0x778)
[    4.321890] systemd[1]: Finished Load/Save Random Seed.
[    4.322055] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    4.327635] systemd[1]: Finished Create System Users.
[    4.328677] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.339777] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.341365] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    4.357482] systemd[1]: Finished Set the console keyboard layout.
[    4.391703] systemd[1]: Started Journal Service.
[    4.396569] systemd-journald[429]: Received client request to flush runtime journal.
[    4.461218]  [PCSPP,TRISTATE,EPP]
[    4.541166] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.541603] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.548666] lp0: using parport0 (polling).
[    4.602284] Bluetooth: Core ver 2.22
[    4.602305] NET: Registered PF_BLUETOOTH protocol family
[    4.602306] Bluetooth: HCI device and connection manager initialized
[    4.602309] Bluetooth: HCI socket layer initialized
[    4.602311] Bluetooth: L2CAP socket layer initialized
[    4.602314] Bluetooth: SCO socket layer initialized
[    4.605402] Intel(R) Wireless WiFi driver for Linux
[    4.633018] iwlwifi 0000:07:00.0: WRT: Overriding region id 0
[    4.633024] iwlwifi 0000:07:00.0: WRT: Overriding region id 1
[    4.633028] iwlwifi 0000:07:00.0: WRT: Overriding region id 2
[    4.633030] iwlwifi 0000:07:00.0: WRT: Overriding region id 3
[    4.633032] iwlwifi 0000:07:00.0: WRT: Overriding region id 4
[    4.633035] iwlwifi 0000:07:00.0: WRT: Overriding region id 6
[    4.633037] iwlwifi 0000:07:00.0: WRT: Overriding region id 8
[    4.633039] iwlwifi 0000:07:00.0: WRT: Overriding region id 9
[    4.633041] iwlwifi 0000:07:00.0: WRT: Overriding region id 10
[    4.633043] iwlwifi 0000:07:00.0: WRT: Overriding region id 11
[    4.633045] iwlwifi 0000:07:00.0: WRT: Overriding region id 15
[    4.633048] iwlwifi 0000:07:00.0: WRT: Overriding region id 16
[    4.633050] iwlwifi 0000:07:00.0: WRT: Overriding region id 18
[    4.633052] iwlwifi 0000:07:00.0: WRT: Overriding region id 19
[    4.633054] iwlwifi 0000:07:00.0: WRT: Overriding region id 20
[    4.633057] iwlwifi 0000:07:00.0: WRT: Overriding region id 21
[    4.633059] iwlwifi 0000:07:00.0: WRT: Overriding region id 28
[    4.633434] iwlwifi 0000:07:00.0: loaded firmware version 46.6f9f215c.0 9260-th-b0-jf-b0-46.ucode op_mode iwlmvm
[    4.636386] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[    4.636389] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    4.636390] RAPL PMU: hw unit of domain package 2^-16 Joules
[    4.639272] cryptd: max_cpu_qlen set to 1000
[    4.651299] AVX version of gcm_enc/dec engaged.
[    4.651351] AES CTR mode by8 optimization enabled
[    4.717469] nct6775: Found NCT6779D or compatible chip at 0x2e:0xa10
[    4.736749] snd_hda_intel 0000:04:00.1: Disabling MSI
[    4.736760] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[    4.754933] iwlwifi 0000:07:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    4.760873] usbcore: registered new interface driver btusb
[    4.761769] Bluetooth: hci0: Firmware revision 0.1 build 168 week 48 2020
[    4.763925] snd_hda_codec_realtek hdaudioC0D0: ALC662 rev3: SKU not ready 0x00000100
[    4.764471] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=3 (0x14/0x16/0x15/0x0/0x0) type:line
[    4.764477] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.764481] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.764484] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.764486] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    4.764488] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.764490] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.764493] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.764495] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.764497] snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
[    4.765113] thermal thermal_zone0: failed to read out thermal zone (-61)
[    4.766475] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input2
[    4.766558] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input3
[    4.766651] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input4
[    4.766726] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input5
[    4.766797] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input6
[    4.766866] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card1/input7
[    4.773845] Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
[    4.773882] Bluetooth: hci0: Boot Address: 0x40800
[    4.773884] Bluetooth: hci0: Firmware Version: 168-48.20
[    4.773887] Bluetooth: hci0: Firmware already loaded
[    4.805282] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.805337] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.805378] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.805428] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.805474] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.805515] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    4.805559] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    4.805658] iwlwifi 0000:07:00.0: base HW address: 54:8d:5a:46:f7:cb
[    4.817949] EDAC sbridge: Seeking for: PCI ID 8086:0ea0
[    4.817967] EDAC sbridge: Seeking for: PCI ID 8086:0ea0
[    4.817973] EDAC sbridge: Seeking for: PCI ID 8086:0e60
[    4.817978] EDAC sbridge: Seeking for: PCI ID 8086:0ea8
[    4.817983] EDAC sbridge: Seeking for: PCI ID 8086:0ea8
[    4.817986] EDAC sbridge: Seeking for: PCI ID 8086:0e71
[    4.817991] EDAC sbridge: Seeking for: PCI ID 8086:0e71
[    4.817994] EDAC sbridge: Seeking for: PCI ID 8086:0eaa
[    4.817999] EDAC sbridge: Seeking for: PCI ID 8086:0eaa
[    4.818002] EDAC sbridge: Seeking for: PCI ID 8086:0eab
[    4.818007] EDAC sbridge: Seeking for: PCI ID 8086:0eab
[    4.818010] EDAC sbridge: Seeking for: PCI ID 8086:0eac
[    4.818015] EDAC sbridge: Seeking for: PCI ID 8086:0eac
[    4.818017] EDAC sbridge: Seeking for: PCI ID 8086:0ead
[    4.818024] EDAC sbridge: Seeking for: PCI ID 8086:0ead
[    4.818026] EDAC sbridge: Seeking for: PCI ID 8086:0e68
[    4.818031] EDAC sbridge: Seeking for: PCI ID 8086:0e79
[    4.818036] EDAC sbridge: Seeking for: PCI ID 8086:0e6a
[    4.818041] EDAC sbridge: Seeking for: PCI ID 8086:0e6b
[    4.818046] EDAC sbridge: Seeking for: PCI ID 8086:0e6c
[    4.818051] EDAC sbridge: Seeking for: PCI ID 8086:0e6d
[    4.818055] EDAC sbridge: Seeking for: PCI ID 8086:0eb8
[    4.818060] EDAC sbridge: Seeking for: PCI ID 8086:0ebc
[    4.818066] EDAC sbridge: Seeking for: PCI ID 8086:0ec8
[    4.818072] EDAC sbridge: Seeking for: PCI ID 8086:0ec8
[    4.818073] EDAC sbridge: Seeking for: PCI ID 8086:0ec9
[    4.818079] EDAC sbridge: Seeking for: PCI ID 8086:0ec9
[    4.818081] EDAC sbridge: Seeking for: PCI ID 8086:0eca
[    4.818087] EDAC sbridge: Seeking for: PCI ID 8086:0eca
[    4.818198] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
[    4.818201] EDAC sbridge:  Ver: 1.1.2 
[    4.823450] intel_rapl_common: Found RAPL domain package
[    4.823452] intel_rapl_common: Found RAPL domain core
[    4.833821] Bluetooth: hci0: MSFT filter_enable is already on
[    4.873787] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.876643] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[    4.965844] alua: device handler registered
[    4.966925] emc: device handler registered
[    4.968180] rdac: device handler registered
[    5.006131] loop0: detected capacity change from 0 to 113560
[    5.044680] loop1: detected capacity change from 0 to 113544
[    5.044746] loop2: detected capacity change from 0 to 133320
[    5.044854] loop3: detected capacity change from 0 to 66144
[    5.076621] loop4: detected capacity change from 0 to 104536
[    5.124651] loop5: detected capacity change from 0 to 132648
[    5.156598] loop6: detected capacity change from 0 to 337424
[    5.196629] loop7: detected capacity change from 0 to 448496
[    5.244611] loop8: detected capacity change from 0 to 66120
[    5.344998] loop9: detected capacity change from 0 to 448512
[    5.368868] loop10: detected capacity change from 0 to 104360
[    5.448829] loop11: detected capacity change from 0 to 333552
[    5.522537] audit: type=1400 audit(1627649736.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=789 comm="apparmor_parser"
[    5.522775] audit: type=1400 audit(1627649736.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=791 comm="apparmor_parser"
[    5.522811] audit: type=1400 audit(1627649736.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=786 comm="apparmor_parser"
[    5.523885] audit: type=1400 audit(1627649736.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=779 comm="apparmor_parser"
[    5.523891] audit: type=1400 audit(1627649736.092:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=792 comm="apparmor_parser"
[    5.523895] audit: type=1400 audit(1627649736.092:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=790 comm="apparmor_parser"
[    5.523899] audit: type=1400 audit(1627649736.092:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=790 comm="apparmor_parser"
[    5.523997] audit: type=1400 audit(1627649736.092:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=783 comm="apparmor_parser"
[    5.524003] audit: type=1400 audit(1627649736.092:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=783 comm="apparmor_parser"
[    5.524007] audit: type=1400 audit(1627649736.092:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=783 comm="apparmor_parser"
[    5.901244] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.901248] Bluetooth: BNEP filters: protocol multicast
[    5.901252] Bluetooth: BNEP socket layer initialized
[    5.915518] NET: Registered PF_ALG protocol family
[    6.060486] Generic FE-GE Realtek PHY r8169-800:00: attached PHY driver (mii_bus:phy_addr=r8169-800:00, irq=MAC)
[    6.260598] r8169 0000:08:00.0 enp8s0: Link is Down
[    6.457248] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.457253] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.457255] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.457256] ACPI: \: failed to evaluate _DSM (0x1001)
[    6.560855] loop12: detected capacity change from 0 to 8
[    9.317861] r8169 0000:08:00.0 enp8s0: Link is Up - 1Gbps/Full - flow control rx/tx
[    9.317884] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[   19.256813] rfkill: input handler disabled
[   23.393487] wlp7s0: authenticate with 2c:4d:54:83:78:14
[   23.395501] wlp7s0: send auth to 2c:4d:54:83:78:14 (try 1/3)
[   23.541254] wlp7s0: send auth to 2c:4d:54:83:78:14 (try 2/3)
[   23.606377] wlp7s0: authenticated
[   23.608505] wlp7s0: associate with 2c:4d:54:83:78:14 (try 1/3)
[   23.713581] wlp7s0: associate with 2c:4d:54:83:78:14 (try 2/3)
[   23.774945] wlp7s0: RX AssocResp from 2c:4d:54:83:78:14 (capab=0x511 status=0 aid=103)
[   23.778229] wlp7s0: associated
[   28.044808] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[   31.006976] wlp7s0: deauthenticated from 2c:4d:54:83:78:14 (Reason: 2=PREV_AUTH_NOT_VALID)
[   32.534794] wlp7s0: authenticate with 2c:4d:54:83:78:14
[   32.542571] wlp7s0: send auth to 2c:4d:54:83:78:14 (try 1/3)
[   32.585991] wlp7s0: authenticated
[   32.588506] wlp7s0: associate with 2c:4d:54:83:78:14 (try 1/3)
[   32.592104] wlp7s0: RX AssocResp from 2c:4d:54:83:78:14 (capab=0x511 status=0 aid=104)
[   32.596156] wlp7s0: associated
[   41.790238] Bluetooth: RFCOMM TTY layer initialized
[   41.790247] Bluetooth: RFCOMM socket layer initialized
[   41.790252] Bluetooth: RFCOMM ver 1.11
[   78.049241] wlp7s0: deauthenticating from 2c:4d:54:83:78:14 by local choice (Reason: 3=DEAUTH_LEAVING)
[   81.647470] wlp7s0: authenticate with 2c:4d:54:83:78:14
[   81.650606] wlp7s0: send auth to 2c:4d:54:83:78:14 (try 1/3)
[   81.690015] wlp7s0: authenticated
[   81.692513] wlp7s0: associate with 2c:4d:54:83:78:14 (try 1/3)
[   81.799675] wlp7s0: associate with 2c:4d:54:83:78:14 (try 2/3)
[   81.885627] wlp7s0: RX AssocResp from 2c:4d:54:83:78:14 (capab=0x511 status=0 aid=105)
[   81.888927] wlp7s0: associated
[ 1054.626456] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
[ 1054.705975] BTRFS: device fsid 4312bf2a-376d-4a44-a69a-6bb112b124f6 devid 1 transid 4672 /dev/sdb scanned by mount (1926)
[ 1054.855944] BTRFS info (device sdb): has skinny extents
[ 1055.315175] BTRFS info (device sdb): host-managed zoned block device /dev/sdb, 67056 zones of 268435456 bytes
[ 1057.219336] BTRFS info (device sdb): zoned mode enabled with zone size 268435456

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Cannot mount hm-smr drive with btrfs
  2021-07-30 13:30 Aleksey Utkin
  2021-08-09  9:35 ` Damien Le Moal
@ 2021-08-09  9:54 ` Johannes Thumshirn
  1 sibling, 0 replies; 4+ messages in thread
From: Johannes Thumshirn @ 2021-08-09  9:54 UTC (permalink / raw)
  To: Aleksey Utkin, linux-btrfs

Sorry for replying so late, the mail must have slipped through the cracks while I was on vacation.

On 30/07/2021 15:31, Aleksey Utkin wrote:
> 8. Operation: Attempt to mount 1: sudo mount /dev/sdb /mnt/sdb
> Result: Mounted unsuccessful,
> Console output: mount: /mnt/sdb: wrong fs type, bad option, bad 
> superblock on /dev/sdb, missing codepage or helper program, or other error.

This sounds like an old libblkid.

> 9. Operation: Attempt to mount 2: sudo mount -t btrfs /dev/sdb /mnt/sdb
> Result: unsuccessful, no messages, the HDD activity LED is glow, the 
> console frozen, ^C does not interrupt the mount operation, the sudo 
> reboot is not performed, the restart of Alt+PRTSCR+B is performed.

This OTOH should have worked. But looking at the dmesg output from [1]
it looks like it did work:
[ 1054.626456] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
[ 1054.705975] BTRFS: device fsid 4312bf2a-376d-4a44-a69a-6bb112b124f6 devid 1 transid 4672 /dev/sdb scanned by mount (1926)
[ 1054.855944] BTRFS info (device sdb): has skinny extents
[ 1055.315175] BTRFS info (device sdb): host-managed zoned block device /dev/sdb, 67056 zones of 268435456 bytes
[ 1057.219336] BTRFS info (device sdb): zoned mode enabled with zone size 268435456

So I'm not really sure what happened here.

[1] https://termbin.com/6g54


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Cannot mount hm-smr drive with btrfs
  2021-07-30 13:30 Aleksey Utkin
@ 2021-08-09  9:35 ` Damien Le Moal
  2021-08-09  9:54 ` Johannes Thumshirn
  1 sibling, 0 replies; 4+ messages in thread
From: Damien Le Moal @ 2021-08-09  9:35 UTC (permalink / raw)
  To: Aleksey Utkin, linux-btrfs; +Cc: Johannes Thumshirn, Naohiro Aota

On 2021/07/30 22:31, Aleksey Utkin wrote:
> Hello.
> 
> 
> I had a problem with the mounting of the BTRFS file system.
> 
> Test case description:
> 
> 1. Operation: Creating btrfs: sudo mkfs.btrfs -O zoned -d single -m 
> single -f /dev/sdb
> Result: The file system was created successfully
> 
> 2. Operation: Mount new btrfs: sudo mount /dev/sdb /mnt/sdb
> Result: Mounted successfully
> 
> 3. Operation: Filling a file system data system (copy using MC)
> Result: Filling a file system data has passed successfully, the data has 
> passed integrity control
> 
> 4. Operation: Umount file system: sudo umount /mnt/sdb/
> Result: Umounted successfully
> 
> 5. Operation: Mount btrfs: sudo mount /dev/sdb /mnt/sdb
> Result: Mounted successfully
> 
> 6. Operation: rebooted the host with mounted file system BTRFS
> Result: Reboot successfully
> 
> 7. Operation: Checking the btrfs file system: sudo btrfs check /dev/sdb
> Result: successfully, console output:
> Opening filesystem to check...
> Checking filesystem on /dev/sdb
> UUID: 4312bf2a-376d-4a44-a69a-6bb112b124f6
> [1/7] checking root items
> [2/7] checking extents
> [3/7] checking free space cache
> [4/7] checking fs roots
> [5/7] checking only csums items (without verifying data)
> [6/7] checking root refs
> [7/7] checking quota groups skipped (not enabled on this FS)
> found 17978056441856 bytes used, no error found
> total csum bytes: 17534343280
> total tree bytes: 22888923136
> total fs tree bytes: 2191491072
> total extent tree bytes: 2166554624
> btree space waste bytes: 990047274
> file data blocks allocated: 17955167518720
>   referenced 17955167518720
> 
> 8. Operation: Attempt to mount 1: sudo mount /dev/sdb /mnt/sdb
> Result: Mounted unsuccessful,
> Console output: mount: /mnt/sdb: wrong fs type, bad option, bad 
> superblock on /dev/sdb, missing codepage or helper program, or other error.
> 
> 9. Operation: Attempt to mount 2: sudo mount -t btrfs /dev/sdb /mnt/sdb
> Result: unsuccessful, no messages, the HDD activity LED is glow, the 
> console frozen, ^C does not interrupt the mount operation, the sudo 
> reboot is not performed, the restart of Alt+PRTSCR+B is performed.
> 
> Version of the kernel:
> $ uname -a
> Linux x79zd3 5.14.0-051400rc2-generic #202107182230 SMP Sun Jul 18 
> 22:34:12 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
> 
> $ btrfs --version
> btrfs-progs v5.13
> from https://github.com/kdave/btrfs-progs

Did you also install the latest libblkid from util-linux tree ? There are
modifications to it for zoned btrfs to find the super block. These modifications
are not yet in any tagged version of libblkid but they are in the master branch
of the util-linux tree upstream.

> 
> $ btrfs fi show
> nothing output
> 
> $ btrfs fi df /mnt/sdb
> ERROR: not a btrfs filesystem: /mnt/sdb
> 
> Device:
> $ sudo smartctl -i /dev/sdb
> smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-051400rc2-generic] 
> (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
> 
> === START OF INFORMATION SECTION ===
> Device Model:     ST18000NM009J-2UW101
> Serial Number:    ZL2BH53L
> LU WWN Device Id: 5 000c50 0c812bf64
> Firmware Version: SE01
> User Capacity:    18 000 207 937 536 bytes [18,0 TB]
> Sector Sizes:     512 bytes logical, 4096 bytes physical
> Rotation Rate:    7200 rpm
> Form Factor:      3.5 inches
> Device is:        Not in smartctl database [for details use: -P showall]
> ATA Version is:   ACS-4 (minor revision not indicated)
> SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is:    Fri Jul 30 14:47:33 2021 MSK
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> 
> # nc cwillu.com 10101 < /dev/kmsg
> after operations 6,7,8,9 - http://cwillu.com:8080/128.0.141.47/2
> 
> $ sudo dmesg | nc termbin.com 9999
> https://termbin.com/6g54
> 
> 
> Best regards,
> Aleksey Utkin
> 
> 
> 
> 


-- 
Damien Le Moal
Western Digital Research

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Cannot mount hm-smr drive with btrfs
@ 2021-07-30 13:30 Aleksey Utkin
  2021-08-09  9:35 ` Damien Le Moal
  2021-08-09  9:54 ` Johannes Thumshirn
  0 siblings, 2 replies; 4+ messages in thread
From: Aleksey Utkin @ 2021-07-30 13:30 UTC (permalink / raw)
  To: linux-btrfs

Hello.


I had a problem with the mounting of the BTRFS file system.

Test case description:

1. Operation: Creating btrfs: sudo mkfs.btrfs -O zoned -d single -m 
single -f /dev/sdb
Result: The file system was created successfully

2. Operation: Mount new btrfs: sudo mount /dev/sdb /mnt/sdb
Result: Mounted successfully

3. Operation: Filling a file system data system (copy using MC)
Result: Filling a file system data has passed successfully, the data has 
passed integrity control

4. Operation: Umount file system: sudo umount /mnt/sdb/
Result: Umounted successfully

5. Operation: Mount btrfs: sudo mount /dev/sdb /mnt/sdb
Result: Mounted successfully

6. Operation: rebooted the host with mounted file system BTRFS
Result: Reboot successfully

7. Operation: Checking the btrfs file system: sudo btrfs check /dev/sdb
Result: successfully, console output:
Opening filesystem to check...
Checking filesystem on /dev/sdb
UUID: 4312bf2a-376d-4a44-a69a-6bb112b124f6
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 17978056441856 bytes used, no error found
total csum bytes: 17534343280
total tree bytes: 22888923136
total fs tree bytes: 2191491072
total extent tree bytes: 2166554624
btree space waste bytes: 990047274
file data blocks allocated: 17955167518720
  referenced 17955167518720

8. Operation: Attempt to mount 1: sudo mount /dev/sdb /mnt/sdb
Result: Mounted unsuccessful,
Console output: mount: /mnt/sdb: wrong fs type, bad option, bad 
superblock on /dev/sdb, missing codepage or helper program, or other error.

9. Operation: Attempt to mount 2: sudo mount -t btrfs /dev/sdb /mnt/sdb
Result: unsuccessful, no messages, the HDD activity LED is glow, the 
console frozen, ^C does not interrupt the mount operation, the sudo 
reboot is not performed, the restart of Alt+PRTSCR+B is performed.

Version of the kernel:
$ uname -a
Linux x79zd3 5.14.0-051400rc2-generic #202107182230 SMP Sun Jul 18 
22:34:12 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

$ btrfs --version
btrfs-progs v5.13
from https://github.com/kdave/btrfs-progs

$ btrfs fi show
nothing output

$ btrfs fi df /mnt/sdb
ERROR: not a btrfs filesystem: /mnt/sdb

Device:
$ sudo smartctl -i /dev/sdb
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.0-051400rc2-generic] 
(local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST18000NM009J-2UW101
Serial Number:    ZL2BH53L
LU WWN Device Id: 5 000c50 0c812bf64
Firmware Version: SE01
User Capacity:    18 000 207 937 536 bytes [18,0 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Jul 30 14:47:33 2021 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

# nc cwillu.com 10101 < /dev/kmsg
after operations 6,7,8,9 - http://cwillu.com:8080/128.0.141.47/2

$ sudo dmesg | nc termbin.com 9999
https://termbin.com/6g54


Best regards,
Aleksey Utkin




^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-08-09  9:54 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-30 13:19 Cannot mount hm-smr drive with btrfs Aleksey Utkin
2021-07-30 13:30 Aleksey Utkin
2021-08-09  9:35 ` Damien Le Moal
2021-08-09  9:54 ` Johannes Thumshirn

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).