* [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine)
@ 2019-07-12 11:05 mangoblues
2019-07-12 12:18 ` Qu Wenruo
0 siblings, 1 reply; 4+ messages in thread
From: mangoblues @ 2019-07-12 11:05 UTC (permalink / raw)
To: linux-btrfs
Hi,
After updating to kernel 5.2 (archlinux): 2 out of my 7 btrfs drives
fail to mount on boot.
Error: can't read superblock on /dev/sdb1 and /dev/sdc1.
Going back to kernel 5.1.16 (and 4.19 also) fixes the problem. Btrfsck
reports the 2 drives are OK.
What can I do to fix this ?
Thanks.
$ btrfs fi show
Label: 'disk3' uuid: 37d68257-a2bf-44e4-82e6-7bda35d3af3c
Total devices 1 FS bytes used 1.77TiB
devid 1 size 1.82TiB used 1.82TiB path /dev/sdb1
Label: 'disk4' uuid: 8b72d7bd-603c-41c0-a395-a763ffe0de8b
Total devices 1 FS bytes used 2.67TiB
devid 1 size 2.73TiB used 2.73TiB path /dev/sdc1
Label: 'disk5' uuid: 1728d60b-bdf2-4baa-8372-de7014d85e1d
Total devices 1 FS bytes used 3.59TiB
devid 1 size 3.64TiB used 3.64TiB path /dev/sdg1
Label: 'disk7' uuid: 5e9437b5-bf53-4135-8b25-52539cfc491e
Total devices 1 FS bytes used 6.66TiB
devid 1 size 7.28TiB used 7.23TiB path /dev/sde1
Label: 'disk6' uuid: ce325155-0922-4c62-9f5d-70cbc1726b5c
Total devices 1 FS bytes used 3.47TiB
devid 1 size 3.64TiB used 3.63TiB path /dev/sdd1
Label: 'disk1' uuid: b9c65214-b1dc-4a97-b798-dc9639177880
Total devices 1 FS bytes used 3.31TiB
devid 1 size 3.64TiB used 3.62TiB path /dev/sdh1
Label: 'disk2' uuid: d77e4116-de32-4ff4-938c-9c6eea6cdd42
Total devices 1 FS bytes used 6.83TiB
devid 1 size 7.28TiB used 7.26TiB path /dev/sdf1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine)
2019-07-12 11:05 [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine) mangoblues
@ 2019-07-12 12:18 ` Qu Wenruo
2019-07-12 12:21 ` Qu Wenruo
2019-07-16 10:48 ` mangoblues
0 siblings, 2 replies; 4+ messages in thread
From: Qu Wenruo @ 2019-07-12 12:18 UTC (permalink / raw)
To: mangoblues, linux-btrfs
[-- Attachment #1.1: Type: text/plain, Size: 1713 bytes --]
On 2019/7/12 下午7:05, mangoblues@gmail.com wrote:
> Hi,
>
> After updating to kernel 5.2 (archlinux): 2 out of my 7 btrfs drives
> fail to mount on boot.
>
> Error: can't read superblock on /dev/sdb1 and /dev/sdc1.
Pull dmesg output please.
Thanks,
Qu
>
> Going back to kernel 5.1.16 (and 4.19 also) fixes the problem. Btrfsck
> reports the 2 drives are OK.
>
> What can I do to fix this ?
>
> Thanks.
>
> $ btrfs fi show
>
> Label: 'disk3' uuid: 37d68257-a2bf-44e4-82e6-7bda35d3af3c
> Total devices 1 FS bytes used 1.77TiB
> devid 1 size 1.82TiB used 1.82TiB path /dev/sdb1
>
> Label: 'disk4' uuid: 8b72d7bd-603c-41c0-a395-a763ffe0de8b
> Total devices 1 FS bytes used 2.67TiB
> devid 1 size 2.73TiB used 2.73TiB path /dev/sdc1
>
> Label: 'disk5' uuid: 1728d60b-bdf2-4baa-8372-de7014d85e1d
> Total devices 1 FS bytes used 3.59TiB
> devid 1 size 3.64TiB used 3.64TiB path /dev/sdg1
>
> Label: 'disk7' uuid: 5e9437b5-bf53-4135-8b25-52539cfc491e
> Total devices 1 FS bytes used 6.66TiB
> devid 1 size 7.28TiB used 7.23TiB path /dev/sde1
>
> Label: 'disk6' uuid: ce325155-0922-4c62-9f5d-70cbc1726b5c
> Total devices 1 FS bytes used 3.47TiB
> devid 1 size 3.64TiB used 3.63TiB path /dev/sdd1
>
> Label: 'disk1' uuid: b9c65214-b1dc-4a97-b798-dc9639177880
> Total devices 1 FS bytes used 3.31TiB
> devid 1 size 3.64TiB used 3.62TiB path /dev/sdh1
>
> Label: 'disk2' uuid: d77e4116-de32-4ff4-938c-9c6eea6cdd42
> Total devices 1 FS bytes used 6.83TiB
> devid 1 size 7.28TiB used 7.26TiB path /dev/sdf1
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine)
2019-07-12 12:18 ` Qu Wenruo
@ 2019-07-12 12:21 ` Qu Wenruo
2019-07-16 10:48 ` mangoblues
1 sibling, 0 replies; 4+ messages in thread
From: Qu Wenruo @ 2019-07-12 12:21 UTC (permalink / raw)
To: mangoblues, linux-btrfs
[-- Attachment #1.1: Type: text/plain, Size: 1830 bytes --]
On 2019/7/12 下午8:18, Qu Wenruo wrote:
>
>
> On 2019/7/12 下午7:05, mangoblues@gmail.com wrote:
>> Hi,
>>
>> After updating to kernel 5.2 (archlinux): 2 out of my 7 btrfs drives
>> fail to mount on boot.
>>
>> Error: can't read superblock on /dev/sdb1 and /dev/sdc1.
>
> Pull dmesg output please.
s/Pull/Full/
>
> Thanks,
> Qu
>
>>
>> Going back to kernel 5.1.16 (and 4.19 also) fixes the problem. Btrfsck
>> reports the 2 drives are OK.
>>
>> What can I do to fix this ?
>>
>> Thanks.
>>
>> $ btrfs fi show
>>
>> Label: 'disk3' uuid: 37d68257-a2bf-44e4-82e6-7bda35d3af3c
>> Total devices 1 FS bytes used 1.77TiB
>> devid 1 size 1.82TiB used 1.82TiB path /dev/sdb1
>>
>> Label: 'disk4' uuid: 8b72d7bd-603c-41c0-a395-a763ffe0de8b
>> Total devices 1 FS bytes used 2.67TiB
>> devid 1 size 2.73TiB used 2.73TiB path /dev/sdc1
>>
>> Label: 'disk5' uuid: 1728d60b-bdf2-4baa-8372-de7014d85e1d
>> Total devices 1 FS bytes used 3.59TiB
>> devid 1 size 3.64TiB used 3.64TiB path /dev/sdg1
>>
>> Label: 'disk7' uuid: 5e9437b5-bf53-4135-8b25-52539cfc491e
>> Total devices 1 FS bytes used 6.66TiB
>> devid 1 size 7.28TiB used 7.23TiB path /dev/sde1
>>
>> Label: 'disk6' uuid: ce325155-0922-4c62-9f5d-70cbc1726b5c
>> Total devices 1 FS bytes used 3.47TiB
>> devid 1 size 3.64TiB used 3.63TiB path /dev/sdd1
>>
>> Label: 'disk1' uuid: b9c65214-b1dc-4a97-b798-dc9639177880
>> Total devices 1 FS bytes used 3.31TiB
>> devid 1 size 3.64TiB used 3.62TiB path /dev/sdh1
>>
>> Label: 'disk2' uuid: d77e4116-de32-4ff4-938c-9c6eea6cdd42
>> Total devices 1 FS bytes used 6.83TiB
>> devid 1 size 7.28TiB used 7.26TiB path /dev/sdf1
>>
>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine)
2019-07-12 12:18 ` Qu Wenruo
2019-07-12 12:21 ` Qu Wenruo
@ 2019-07-16 10:48 ` mangoblues
1 sibling, 0 replies; 4+ messages in thread
From: mangoblues @ 2019-07-16 10:48 UTC (permalink / raw)
To: Qu Wenruo; +Cc: linux-btrfs
Hi,
I have now updated to kernel 5.2.1 and btrfs-progs 5.2, it didn't
change anything. (reverting back to kernels prior to 5.2 fixes the
problem)
dmesg shows:
---start cut---
[ 9.499103] BTRFS: device label disk1 devid 1 transid 564351 /dev/sdh1
[ 9.549915] BTRFS info (device sdh1): enabling auto defrag
[ 9.549919] BTRFS info (device sdh1): disk space caching is enabled
[ 11.040906] BTRFS critical (device sdb1): corrupt leaf: root=5
block=3210507616256 slot=24 ino=265, invalid inode generation: has
140000853721088 expect [0, 50548]
[ 11.040912] BTRFS error (device sdb1): block=3210507616256 read
time tree block corruption detected
[ 11.734989] audit: type=1130 audit(1563271482.275:8): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=emergency comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 11.810131] audit: type=1130 audit(1563271482.348:9): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 11.828681] audit: type=1127 audit(1563271482.368:10): pid=598
uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp"
exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=?
terminal=? res=success'
[ 11.833931] audit: type=1130 audit(1563271482.372:11): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 12.227881] audit: type=1130 audit(1563271482.765:12): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 13.781261] BTRFS critical (device sdc1): corrupt leaf: root=5
block=5051749396480 slot=24 ino=265, invalid inode generation: has
140471277748224 expect [0, 71589]
[ 13.781268] BTRFS error (device sdc1): block=5051749396480 read
time tree block corruption detected
---end---
btrfsck shows everything is fine:
Opening filesystem to check...
Checking filesystem on /dev/sdb1
UUID: 37d68257-a2bf-44e4-82e6-7bda35d3af3c
found 1944732672000 bytes used, no error found
total csum bytes: 1828991772
total tree bytes: 2113806336
total fs tree bytes: 10858496
total extent tree bytes: 65564672
btree space waste bytes: 117676730
file data blocks allocated: 2099709243392
referenced 1941403754496
Opening filesystem to check...
Checking filesystem on /dev/sdc1
UUID: 8b72d7bd-603c-41c0-a395-a763ffe0de8b
found 2917632086016 bytes used, no error found
total csum bytes: 2820778500
total tree bytes: 3325902848
total fs tree bytes: 26071040
total extent tree bytes: 114151424
btree space waste bytes: 238316653
file data blocks allocated: 3056736382976
referenced 2913002852352
And finally, here is the full dmesg if you need more info:
[ 0.000000] microcode: microcode updated early to revision 0x25,
date = 2019-02-26
[ 0.000000] Linux version 5.2.1-arch1-1-ARCH
(builduser@heftig-55221) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Sun
Jul 14 14:52:52 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=c4835a50-8ef0-4342-80e2-4296f5ecc5a2 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c61dbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c61dc000-0x00000000c61e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c61e3000-0x00000000d9a73fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9a74000-0x00000000d9b07fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9b08000-0x00000000d9b21fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9b22000-0x00000000d9c8afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9c8b000-0x00000000d9f6bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f6c000-0x00000000d9ffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xd9b0d000 ACPI 2.0=0xd9b0d000 SMBIOS=0xd9f6a518
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: /D34010WYK, BIOS WYLPT10H.86A.0043.2016.1116.1449
11/16/2016
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1695.955 MHz processor
[ 0.000148] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000150] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000160] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000166] MTRR default type: uncachable
[ 0.000168] MTRR fixed ranges enabled:
[ 0.000169] 00000-9FFFF write-back
[ 0.000171] A0000-EFFFF uncachable
[ 0.000172] F0000-FFFFF write-protect
[ 0.000173] MTRR variable ranges enabled:
[ 0.000175] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000177] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000178] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000179] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000181] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000182] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000183] 6 disabled
[ 0.000183] 7 disabled
[ 0.000184] 8 disabled
[ 0.000185] 9 disabled
[ 0.001307] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001556] total RAM covered: 8110M
[ 0.001987] Found optimal setting for mtrr clean up
[ 0.001989] gran_size: 64K chunk_size: 128M num_reg: 8
lose cover RAM: 0G
[ 0.007887] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.007894] last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.020624] check: Scanning 1 areas for low memory corruption
[ 0.020629] Using GB pages for direct mapping
[ 0.020632] BRK [0x1ae001000, 0x1ae001fff] PGTABLE
[ 0.020635] BRK [0x1ae002000, 0x1ae002fff] PGTABLE
[ 0.020636] BRK [0x1ae003000, 0x1ae003fff] PGTABLE
[ 0.020697] BRK [0x1ae004000, 0x1ae004fff] PGTABLE
[ 0.020699] BRK [0x1ae005000, 0x1ae005fff] PGTABLE
[ 0.021000] BRK [0x1ae006000, 0x1ae006fff] PGTABLE
[ 0.021072] BRK [0x1ae007000, 0x1ae007fff] PGTABLE
[ 0.021287] BRK [0x1ae008000, 0x1ae008fff] PGTABLE
[ 0.021391] BRK [0x1ae009000, 0x1ae009fff] PGTABLE
[ 0.021491] Secure boot could not be determined
[ 0.021493] RAMDISK: [mem 0x36973000-0x374b0fff]
[ 0.021501] ACPI: Early table checksum verification disabled
[ 0.021505] ACPI: RSDP 0x00000000D9B0D000 000024 (v02 INTEL )
[ 0.021510] ACPI: XSDT 0x00000000D9B0D088 00008C (v01 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021517] ACPI: FACP 0x00000000D9B1CD18 00010C (v05 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021524] ACPI: DSDT 0x00000000D9B0D1A0 00FB78 (v02 INTEL
D34010WY 0000002B INTL 20120711)
[ 0.021528] ACPI: FACS 0x00000000D9C8AF80 000040
[ 0.021532] ACPI: APIC 0x00000000D9B1CE28 000072 (v03 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021535] ACPI: FPDT 0x00000000D9B1CEA0 000044 (v01 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021539] ACPI: FIDT 0x00000000D9B1CEE8 00009C (v01 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021543] ACPI: SSDT 0x00000000D9B1CF88 0004B5 (v01 INTEL
D34010WY 0000002B INTL 20120711)
[ 0.021547] ACPI: SSDT 0x00000000D9B1D440 000AD8 (v01 INTEL
D34010WY 0000002B INTL 20120711)
[ 0.021550] ACPI: MCFG 0x00000000D9B1DF18 00003C (v01 INTEL
D34010WY 0000002B MSFT 00000097)
[ 0.021554] ACPI: HPET 0x00000000D9B1DF58 000038 (v01 INTEL
D34010WY 0000002B AMI. 00000005)
[ 0.021558] ACPI: SSDT 0x00000000D9B1DF90 000315 (v01 INTEL
D34010WY 0000002B INTL 20120711)
[ 0.021562] ACPI: SSDT 0x00000000D9B1E2A8 0030DF (v01 INTEL
D34010WY 0000002B INTL 20091112)
[ 0.021565] ACPI: BGRT 0x00000000D9B21388 000038 (v00 INTEL
D34010WY 0000002B AMI 00010013)
[ 0.021569] ACPI: DMAR 0x00000000D9B213C0 0001AC (v01 INTEL
D34010WY 0000002B INTL 00000001)
[ 0.021573] ACPI: CSRT 0x00000000D9B21570 0000C4 (v01 INTEL
D34010WY 0000002B INTL 20100528)
[ 0.021582] ACPI: Local APIC address 0xfee00000
[ 0.021691] No NUMA configuration found
[ 0.021692] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.021697] NODE_DATA(0) allocated [mem 0x21fdfc000-0x21fdfffff]
[ 0.021727] Zone ranges:
[ 0.021728] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.021729] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.021731] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.021732] Device empty
[ 0.021733] Movable zone start for each node
[ 0.021734] Early memory node ranges
[ 0.021735] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.021737] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.021738] node 0: [mem 0x0000000000100000-0x00000000c61dbfff]
[ 0.021739] node 0: [mem 0x00000000c61e3000-0x00000000d9a73fff]
[ 0.021739] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.021740] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.021942] Zeroed struct page in unavailable ranges: 26102 pages
[ 0.021943] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.021945] On node 0 totalpages: 2070538
[ 0.021947] DMA zone: 64 pages used for memmap
[ 0.021947] DMA zone: 22 pages reserved
[ 0.021949] DMA zone: 3996 pages, LIFO batch:0
[ 0.022018] DMA32 zone: 13866 pages used for memmap
[ 0.022020] DMA32 zone: 887406 pages, LIFO batch:63
[ 0.037460] Normal zone: 18424 pages used for memmap
[ 0.037462] Normal zone: 1179136 pages, LIFO batch:63
[ 0.056723] Reserving Intel graphics memory at [mem 0xdb200000-0xdf1fffff]
[ 0.056814] ACPI: PM-Timer IO Port: 0x1808
[ 0.056817] ACPI: Local APIC address 0xfee00000
[ 0.056825] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.056839] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.056842] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.056844] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.056845] ACPI: IRQ0 used by override.
[ 0.056847] ACPI: IRQ9 used by override.
[ 0.056849] Using ACPI (MADT) for SMP configuration information
[ 0.056852] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.056865] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.056897] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.056899] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.056901] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.056902] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.056905] PM: Registered nosave memory: [mem 0xc61dc000-0xc61e2fff]
[ 0.056907] PM: Registered nosave memory: [mem 0xd9a74000-0xd9b07fff]
[ 0.056908] PM: Registered nosave memory: [mem 0xd9b08000-0xd9b21fff]
[ 0.056909] PM: Registered nosave memory: [mem 0xd9b22000-0xd9c8afff]
[ 0.056910] PM: Registered nosave memory: [mem 0xd9c8b000-0xd9f6bfff]
[ 0.056910] PM: Registered nosave memory: [mem 0xd9f6c000-0xd9ffefff]
[ 0.056913] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.056914] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.056915] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.056915] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.056916] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.056917] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.056918] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.056919] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.056919] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.056920] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.056921] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.056922] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.056923] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.056924] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.056926] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.056928] Booting paravirtualized kernel on bare hardware
[ 0.056931] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.273022] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320
nr_cpu_ids:4 nr_node_ids:1
[ 0.273387] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.273397] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.273399] pcpu-alloc: [0] 0 1 2 3
[ 0.273426] Built 1 zonelists, mobility grouping on. Total pages: 2038162
[ 0.273427] Policy zone: Normal
[ 0.273430] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux
root=UUID=c4835a50-8ef0-4342-80e2-4296f5ecc5a2 rw quiet
[ 0.280978] Calgary: detecting Calgary via BIOS EBDA area
[ 0.280979] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.318779] Memory: 7968876K/8282152K available (12291K kernel
code, 1320K rwdata, 3888K rodata, 1612K init, 2880K bss, 313276K
reserved, 0K cma-reserved)
[ 0.318954] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.318967] Kernel/User page tables isolation: enabled
[ 0.318987] ftrace: allocating 37370 entries in 146 pages
[ 0.341363] rcu: Preemptible hierarchical RCU implementation.
[ 0.341365] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.341366] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.341367] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.341368] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.341369] Tasks RCU enabled.
[ 0.341370] rcu: RCU calculated value of scheduler-enlistment delay
is 30 jiffies.
[ 0.341371] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.343973] NR_IRQS: 20736, nr_irqs: 728, preallocated irqs: 16
[ 0.344150] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.344236] random: get_random_bytes called from
start_kernel+0x37e/0x559 with crng_init=0
[ 0.344267] Console: colour dummy device 80x25
[ 0.344273] printk: console [tty0] enabled
[ 0.344298] ACPI: Core revision 20190509
[ 0.344583] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.344591] hpet clockevent registered
[ 0.344597] APIC: Switch to symmetric I/O mode setup
[ 0.344599] DMAR: Host address width 39
[ 0.344601] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.344607] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
c0000020660462 ecap f0101a
[ 0.344608] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.344613] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008020660462 ecap f010da
[ 0.344614] DMAR: RMRR base: 0x000000d9eb0000 end: 0x000000d9ebefff
[ 0.344615] DMAR: RMRR base: 0x000000db000000 end: 0x000000df1fffff
[ 0.344617] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.344618] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.344618] DMAR: ANDD device: 3 name: \_SB.PCI0.SPI0
[ 0.344619] DMAR: ANDD device: 4 name: \_SB.PCI0.SPI1
[ 0.344620] DMAR: ANDD device: 5 name: \_SB.PCI0.UA00
[ 0.344620] DMAR: ANDD device: 6 name: \_SB.PCI0.UA01
[ 0.344621] DMAR: ANDD device: 7 name: \_SB.PCI0.SDHC
[ 0.344624] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.344625] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.344626] DMAR-IR: Queued invalidation will be enabled to support
x2apic and Intr-remapping.
[ 0.345406] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.345407] x2apic enabled
[ 0.345413] Switched APIC routing to cluster x2apic.
[ 0.346055] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.361270] clocksource: tsc-early: mask: 0xffffffffffffffff
max_cycles: 0x18723a249bb, max_idle_ns: 440795273391 ns
[ 0.361275] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3393.23 BogoMIPS (lpj=5653183)
[ 0.361278] pid_max: default: 32768 minimum: 301
[ 0.365394] LSM: Security Framework initializing
[ 0.365399] Yama: becoming mindful.
[ 0.367329] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.368319] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.368365] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.368395] Mountpoint-cache hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.368598] *** VALIDATE proc ***
[ 0.368663] *** VALIDATE cgroup1 ***
[ 0.368664] *** VALIDATE cgroup2 ***
[ 0.368725] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.368740] process: using mwait in idle threads
[ 0.368743] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.368744] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.368747] Spectre V2 : Mitigation: Full generic retpoline
[ 0.368747] Spectre V2 : Spectre v2 / SpectreRSB mitigation:
Filling RSB on context switch
[ 0.368748] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.368751] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.368752] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.368754] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.368758] MDS: Mitigation: Clear CPU buffers
[ 0.368995] Freeing SMP alternatives memory: 32K
[ 0.370399] TSC deadline timer enabled
[ 0.370402] smpboot: CPU0: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz
(family: 0x6, model: 0x45, stepping: 0x1)
[ 0.387948] Performance Events: PEBS fmt2+, Haswell events, 16-deep
LBR, full-width counters, Intel PMU driver.
[ 0.387994] ... version: 3
[ 0.387994] ... bit width: 48
[ 0.387995] ... generic registers: 4
[ 0.387996] ... value mask: 0000ffffffffffff
[ 0.387997] ... max period: 00007fffffffffff
[ 0.387998] ... fixed-purpose events: 3
[ 0.387999] ... event mask: 000000070000000f
[ 0.394610] rcu: Hierarchical SRCU implementation.
[ 0.418091] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.424618] smp: Bringing up secondary CPUs ...
[ 0.464626] x86: Booting SMP configuration:
[ 0.464627] .... node #0, CPUs: #1 #2
[ 0.505094] MDS CPU bug present and SMT on, data leak possible. See
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
for more details.
[ 0.544627] #3
[ 0.545068] smp: Brought up 1 node, 4 CPUs
[ 0.545068] smpboot: Max logical packages: 1
[ 0.545068] smpboot: Total of 4 processors activated (13573.95 BogoMIPS)
[ 0.548266] devtmpfs: initialized
[ 0.548266] x86/mm: Memory block size: 128MB
[ 0.548916] PM: Registering ACPI NVS region [mem
0xc61dc000-0xc61e2fff] (28672 bytes)
[ 0.548916] PM: Registering ACPI NVS region [mem
0xd9b22000-0xd9c8afff] (1478656 bytes)
[ 0.548916] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.548916] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.548916] pinctrl core: initialized pinctrl subsystem
[ 0.548916] PM: RTC time: 10:04:31, date: 2019-07-16
[ 0.548916] NET: Registered protocol family 16
[ 0.548916] audit: initializing netlink subsys (disabled)
[ 0.548916] audit: type=2000 audit(1563271470.203:1):
state=initialized audit_enabled=0 res=1
[ 0.548916] cpuidle: using governor ladder
[ 0.548916] cpuidle: using governor menu
[ 0.548916] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.548916] ACPI: bus type PCI registered
[ 0.548916] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.548916] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.548916] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.548916] PCI: Using configuration type 1 for base access
[ 0.548916] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.552069] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.552069] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.554750] ACPI: Added _OSI(Module Device)
[ 0.554751] ACPI: Added _OSI(Processor Device)
[ 0.554752] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.554753] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.554755] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.554756] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.554757] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.574676] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.578479] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.579957] ACPI: Dynamic OEM Table Load:
[ 0.579964] ACPI: SSDT 0xFFFF8CA616286400 0003D3 (v01 PmRef
Cpu0Cst 00003001 INTL 20120711)
[ 0.580852] ACPI: Dynamic OEM Table Load:
[ 0.580858] ACPI: SSDT 0xFFFF8CA61623B000 0005AA (v01 PmRef ApIst
00003000 INTL 20120711)
[ 0.581815] ACPI: Dynamic OEM Table Load:
[ 0.581820] ACPI: SSDT 0xFFFF8CA615C8D000 000119 (v01 PmRef ApCst
00003000 INTL 20120711)
[ 0.584098] ACPI: Interpreter enabled
[ 0.584138] ACPI: (supports S0 S3 S4 S5)
[ 0.584139] ACPI: Using IOAPIC for interrupt routing
[ 0.584182] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.584835] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.606093] ACPI: Power Resource [FN00] (off)
[ 0.606225] ACPI: Power Resource [FN01] (off)
[ 0.606350] ACPI: Power Resource [FN02] (off)
[ 0.606479] ACPI: Power Resource [FN03] (off)
[ 0.606602] ACPI: Power Resource [FN04] (off)
[ 0.607888] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.607895] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.609138] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug
SHPCHotplug PME AER PCIeCapability LTR]
[ 0.609140] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.609898] PCI host bridge to bus 0000:00
[ 0.609901] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.609903] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.609905] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.609909] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000c3fff window]
[ 0.609911] pci_bus 0000:00: root bus resource [mem
0x000c4000-0x000c7fff window]
[ 0.609912] pci_bus 0000:00: root bus resource [mem
0x000c8000-0x000cbfff window]
[ 0.609914] pci_bus 0000:00: root bus resource [mem
0x000cc000-0x000cffff window]
[ 0.609915] pci_bus 0000:00: root bus resource [mem
0x000d0000-0x000d3fff window]
[ 0.609917] pci_bus 0000:00: root bus resource [mem
0x000d4000-0x000d7fff window]
[ 0.609918] pci_bus 0000:00: root bus resource [mem
0x000d8000-0x000dbfff window]
[ 0.609920] pci_bus 0000:00: root bus resource [mem
0x000dc000-0x000dffff window]
[ 0.609921] pci_bus 0000:00: root bus resource [mem
0x000e0000-0x000e3fff window]
[ 0.609923] pci_bus 0000:00: root bus resource [mem
0x000e4000-0x000e7fff window]
[ 0.609924] pci_bus 0000:00: root bus resource [mem
0x000e8000-0x000ebfff window]
[ 0.609926] pci_bus 0000:00: root bus resource [mem
0x000ec000-0x000effff window]
[ 0.609927] pci_bus 0000:00: root bus resource [mem
0xdf200000-0xfeafffff window]
[ 0.609929] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.609939] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.610115] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.610131] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.610139] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff
64bit pref]
[ 0.610145] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.610162] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.610302] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.610314] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[ 0.610487] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.610509] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 0.610574] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.610712] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.610737] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e01f 64bit]
[ 0.610812] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.610949] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
[ 0.610969] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.610977] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[ 0.610985] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.611048] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.611185] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.611204] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[ 0.611269] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.611418] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.611518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.611756] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.611862] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.612088] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.612112] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[ 0.612205] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.612346] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.612592] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.612609] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.612617] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.612624] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.612632] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.612639] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.612647] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff]
[ 0.612686] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.612815] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.612834] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit]
[ 0.612855] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.613093] acpiphp: Slot [1] registered
[ 0.613106] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.613223] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.613276] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.613623] pci 0000:02:00.0: supports D1
[ 0.613624] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.613816] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.613821] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.615546] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.615646] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.615740] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.615833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.615926] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.616017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.616110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.616202] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12
14 15) *0, disabled.
[ 0.616870] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.616870] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.616870] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.616870] vgaarb: loaded
[ 0.616870] ACPI: bus type USB registered
[ 0.616870] usbcore: registered new interface driver usbfs
[ 0.616870] usbcore: registered new interface driver hub
[ 0.616870] usbcore: registered new device driver usb
[ 0.616870] pps_core: LinuxPPS API ver. 1 registered
[ 0.616870] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[ 0.616870] PTP clock support registered
[ 0.616870] EDAC MC: Ver: 3.0.0
[ 0.616870] Registered efivars operations
[ 0.621382] PCI: Using ACPI for IRQ routing
[ 0.622770] PCI: pci_cache_line_size set to 64 bytes
[ 0.622823] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.622824] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.622825] e820: reserve RAM buffer [mem 0xc61dc000-0xc7ffffff]
[ 0.622827] e820: reserve RAM buffer [mem 0xd9a74000-0xdbffffff]
[ 0.622829] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.622830] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.622959] NetLabel: Initializing
[ 0.622960] NetLabel: domain hash size = 128
[ 0.622961] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.622979] NetLabel: unlabeled traffic allowed by default
[ 0.624976] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.624982] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.627994] clocksource: Switched to clocksource tsc-early
[ 0.644156] VFS: Disk quotas dquot_6.6.0
[ 0.644175] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.644211] *** VALIDATE hugetlbfs ***
[ 0.644268] pnp: PnP ACPI init
[ 0.644416] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.644423] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.644750] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.644752] system 00:01: [io 0xffff] has been reserved
[ 0.644754] system 00:01: [io 0xffff] has been reserved
[ 0.644756] system 00:01: [io 0xffff] has been reserved
[ 0.644758] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.644759] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.644761] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.644763] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.644765] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.644766] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.644771] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.644804] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.644881] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.644886] system 00:03: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.645063] system 00:04: [io 0x0a00-0x0a1f] has been reserved
[ 0.645065] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.645069] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.645256] pnp 00:05: Plug and Play ACPI device, IDs NTN0530 (disabled)
[ 0.645325] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.645329] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.646240] system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.646242] system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.646244] system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.646246] system 00:07: [mem 0xfe108000-0xfe108fff] has been reserved
[ 0.646248] system 00:07: [mem 0xfe10a000-0xfe10afff] has been reserved
[ 0.646250] system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
[ 0.646252] system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 0.646254] system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
[ 0.646256] system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
[ 0.646258] system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
[ 0.646263] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.646884] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.646886] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.646888] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.646890] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.646892] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.646893] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.646896] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.646897] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.646899] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.646902] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.646903] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.646905] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.646910] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.647341] pnp: PnP ACPI: found 9 devices
[ 0.653543] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.653555] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.653576] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.653581] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.653591] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.653593] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.653595] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.653596] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.653598] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.653599] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.653601] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.653603] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.653604] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.653606] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.653608] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.653609] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.653611] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.653612] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.653614] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.653616] pci_bus 0000:00: resource 19 [mem 0xdf200000-0xfeafffff window]
[ 0.653618] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.653844] NET: Registered protocol family 2
[ 0.654015] tcp_listen_portaddr_hash hash table entries: 4096
(order: 4, 65536 bytes)
[ 0.654058] TCP established hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.654208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.654398] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.654436] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.654468] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.654563] NET: Registered protocol family 1
[ 0.654571] NET: Registered protocol family 44
[ 0.654583] pci 0000:00:02.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[ 0.674757] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x649
took 19364 usecs
[ 0.674781] PCI: CLS 64 bytes, default 64
[ 0.674826] Trying to unpack rootfs image as initramfs...
[ 0.858767] Freeing initrd memory: 11512K
[ 0.858813] DMAR: ACPI device "INT33C2:00" under DMAR at fed91000 as 00:15.1
[ 0.858817] DMAR: ACPI device "INT33C3:00" under DMAR at fed91000 as 00:15.2
[ 0.858820] DMAR: ACPI device "INT33C0:00" under DMAR at fed91000 as 00:15.3
[ 0.858823] DMAR: ACPI device "INT33C1:00" under DMAR at fed91000 as 00:15.4
[ 0.858826] DMAR: ACPI device "INT33C4:00" under DMAR at fed91000 as 00:15.5
[ 0.858829] DMAR: ACPI device "INT33C5:00" under DMAR at fed91000 as 00:15.6
[ 0.858832] DMAR: ACPI device "INT33C6:00" under DMAR at fed91000 as 00:17.0
[ 0.877980] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.877983] software IO TLB: mapped [mem 0xd1261000-0xd5261000] (64MB)
[ 0.878129] check: Scanning for low memory corruption every 60 seconds
[ 0.878903] Initialise system trusted keyrings
[ 0.878915] Key type blacklist registered
[ 0.878971] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.880800] zbud: loaded
[ 0.883200] Key type asymmetric registered
[ 0.883202] Asymmetric key parser 'x509' registered
[ 0.883214] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 244)
[ 0.883262] io scheduler mq-deadline registered
[ 0.883263] io scheduler kyber registered
[ 0.883327] io scheduler bfq registered
[ 0.883796] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[ 0.884083] pcieport 0000:00:1c.3: PME: Signaling with IRQ 43
[ 0.884173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.884279] efifb: probing for efifb
[ 0.884300] efifb: showing boot graphics
[ 0.885692] efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
[ 0.885693] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.885694] efifb: scrolling: redraw
[ 0.885696] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.885751] fbcon: Deferring console take-over
[ 0.885753] fb0: EFI VGA frame buffer device
[ 0.885765] intel_idle: MWAIT substates: 0x11142120
[ 0.885766] intel_idle: v0.4.1 model 0x45
[ 0.886081] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.886180] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.887991] ACPI: Power Button [PWRB]
[ 0.888064] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.891324] ACPI: Power Button [PWRF]
[ 0.892610] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.892612] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.893016] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.893017] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.893355] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.914151] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud =
115200) is a 16550A
[ 0.915594] usbcore: registered new interface driver usbserial_generic
[ 0.915600] usbserial: USB Serial support registered for generic
[ 0.915623] rtc_cmos 00:02: RTC can wake from S4
[ 0.915800] rtc_cmos 00:02: registered as rtc0
[ 0.915822] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 0.915892] intel_pstate: Intel P-state driver initializing
[ 0.916102] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.916676] NET: Registered protocol family 10
[ 0.937722] Segment Routing with IPv6
[ 0.937784] NET: Registered protocol family 17
[ 0.938228] mce: Using 7 MCE banks
[ 0.938244] RAS: Correctable Errors collector initialized.
[ 0.938317] microcode: sig=0x40651, pf=0x40, revision=0x25
[ 0.938404] microcode: Microcode Update Driver: v2.2.
[ 0.938419] sched_clock: Marking stable (937969138,
429094)->(943988668, -5590436)
[ 0.938719] registered taskstats version 1
[ 0.938728] Loading compiled-in X.509 certificates
[ 0.944329] Loaded X.509 cert 'Build time autogenerated kernel key:
bc1e682951c6d55a59900fd12108abe436332297'
[ 0.944358] zswap: loaded using pool lzo/zbud
[ 0.955121] Key type big_key registered
[ 0.955824] PM: Magic number: 11:779:72
[ 0.955958] rtc_cmos 00:02: setting system clock to
2019-07-16T10:04:31 UTC (1563271471)
[ 0.957718] Freeing unused decrypted memory: 2040K
[ 0.958167] Freeing unused kernel image memory: 1612K
[ 0.978130] Write protecting the kernel read-only data: 18432k
[ 0.979426] Freeing unused kernel image memory: 2012K
[ 0.979679] Freeing unused kernel image memory: 208K
[ 1.002812] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.002813] x86/mm: Checking user space page tables
[ 1.017743] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.017746] Run /init as init process
[ 1.056386] fbcon: Taking over console
[ 1.056481] Console: switching to colour frame buffer device 240x67
[ 1.177862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.180275] ehci-pci: EHCI PCI platform driver
[ 1.180590] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.180602] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 1.180619] ehci-pci 0000:00:1d.0: debug port 2
[ 1.184540] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.184569] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3b000
[ 1.189718] SCSI subsystem initialized
[ 1.194731] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.194814] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.02
[ 1.194817] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.194820] usb usb1: Product: EHCI Host Controller
[ 1.194823] usb usb1: Manufacturer: Linux 5.2.1-arch1-1-ARCH ehci_hcd
[ 1.194825] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.195070] hub 1-0:1.0: USB hub found
[ 1.195085] hub 1-0:1.0: 2 ports detected
[ 1.195442] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.195456] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 1.196539] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci
version 0x100 quirks 0x000000000004b810
[ 1.196549] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.196984] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002, bcdDevice= 5.02
[ 1.196988] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.196991] usb usb2: Product: xHCI Host Controller
[ 1.196994] usb usb2: Manufacturer: Linux 5.2.1-arch1-1-ARCH xhci-hcd
[ 1.196996] usb usb2: SerialNumber: 0000:00:14.0
[ 1.197429] hub 2-0:1.0: USB hub found
[ 1.197453] hub 2-0:1.0: 9 ports detected
[ 1.202431] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.202440] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 3
[ 1.202446] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.202526] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0003, bcdDevice= 5.02
[ 1.202530] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.202532] usb usb3: Product: xHCI Host Controller
[ 1.202535] usb usb3: Manufacturer: Linux 5.2.1-arch1-1-ARCH xhci-hcd
[ 1.202538] usb usb3: SerialNumber: 0000:00:14.0
[ 1.203042] hub 3-0:1.0: USB hub found
[ 1.203061] hub 3-0:1.0: 4 ports detected
[ 1.204067] libata version 3.00 loaded.
[ 1.211258] ahci 0000:00:1f.2: version 3.0
[ 1.211646] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6
Gbps 0x8 impl SATA mode
[ 1.211652] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio
slum part deso sadm sds apst
[ 1.213929] scsi host0: ahci
[ 1.214194] scsi host1: ahci
[ 1.214373] scsi host2: ahci
[ 1.214508] scsi host3: ahci
[ 1.214583] ata1: DUMMY
[ 1.214584] ata2: DUMMY
[ 1.214585] ata3: DUMMY
[ 1.214589] ata4: SATA max UDMA/133 abar m2048@0xf7d3a000 port
0xf7d3a280 irq 45
[ 1.524713] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.532114] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.532825] ata4.00: supports DRM functions and may not be fully accessible
[ 1.533056] ata4.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133
[ 1.533062] ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.533977] ata4.00: Trusted Computing capability qword not valid!
[ 1.534861] ata4.00: supports DRM functions and may not be fully accessible
[ 1.534890] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 1.535729] ata4.00: Trusted Computing capability qword not valid!
[ 1.535741] ata4.00: configured for UDMA/133
[ 1.536411] scsi 3:0:0:0: Direct-Access ATA KINGSTON
SUV500M 56RI PQ: 0 ANSI: 5
[ 1.550483] sd 3:0:0:0: [sda] 468862128 512-byte logical blocks:
(240 GB/224 GiB)
[ 1.550489] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 1.550520] sd 3:0:0:0: [sda] Write Protect is off
[ 1.550525] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.550574] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.553115] sda: sda1 sda2
[ 1.553772] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.653171] random: fast init done
[ 1.675054] usb 1-1: New USB device found, idVendor=8087,
idProduct=8000, bcdDevice= 0.04
[ 1.675058] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.675402] hub 1-1:1.0: USB hub found
[ 1.675536] hub 1-1:1.0: 8 ports detected
[ 1.677930] usb 2-1: New USB device found, idVendor=046d,
idProduct=c52b, bcdDevice=12.03
[ 1.677936] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.677958] usb 2-1: Product: USB Receiver
[ 1.677962] usb 2-1: Manufacturer: Logitech
[ 1.688270] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.695861] usbcore: registered new interface driver usbhid
[ 1.695862] usbhid: USB HID core driver
[ 1.737876] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 1.798125] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.817172] usb 3-3: New USB device found, idVendor=174c,
idProduct=3074, bcdDevice= 1.00
[ 1.817175] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.817177] usb 3-3: Product: ASM107x
[ 1.817179] usb 3-3: Manufacturer: Asmedia
[ 1.817180] usb 3-3: SerialNumber: 0000000A0016
[ 1.818473] hub 3-3:1.0: USB hub found
[ 1.818621] hub 3-3:1.0: 4 ports detected
[ 1.891308] tsc: Refined TSC clocksource calibration: 1696.075 MHz
[ 1.891318] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1872ab846c0, max_idle_ns: 440795273396 ns
[ 1.891348] clocksource: Switched to clocksource tsc
[ 1.898885] systemd[1]: systemd 242.32-3-arch running in system
mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP
+LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS
+KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.914866] systemd[1]: Detected architecture x86-64.
[ 1.919708] systemd[1]: Set hostname to <HDA>.
[ 1.937986] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[ 2.081045] usb 2-3: New USB device found, idVendor=174c,
idProduct=2074, bcdDevice= 1.00
[ 2.081048] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.081050] usb 2-3: Product: ASM107x
[ 2.081052] usb 2-3: Manufacturer: Asmedia
[ 2.081053] usb 2-3: SerialNumber: 0000000A0016
[ 2.081822] hub 2-3:1.0: USB hub found
[ 2.082113] hub 2-3:1.0: 4 ports detected
[ 2.083896] systemd[1]:
/usr/lib/systemd/system/fail2ban.service:13: PIDFile= references a
path below legacy directory /var/run/, updating
/var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please
update the unit file accordingly.
[ 2.091058] systemd[1]: Created slice system-netctl.slice.
[ 2.091437] systemd[1]: Created slice User and Session Slice.
[ 2.091635] systemd[1]: Listening on Journal Socket.
[ 2.092752] systemd[1]: Starting Create list of required static
device nodes for the current kernel...
[ 2.094735] systemd[1]: Starting Load Kernel Modules...
[ 2.094925] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 2.125272] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 2.134664] fuse: init (API version 7.31)
[ 2.141895] random: lvm: uninitialized urandom read (4 bytes read)
[ 2.154659] usb 3-3.3: new SuperSpeed Gen 1 USB device number 3
using xhci_hcd
[ 2.173583] usb 3-3.3: New USB device found, idVendor=174c,
idProduct=3074, bcdDevice= 1.00
[ 2.173587] usb 3-3.3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 2.173590] usb 3-3.3: Product: ASM107x
[ 2.173593] usb 3-3.3: Manufacturer: Asmedia
[ 2.173596] usb 3-3.3: SerialNumber: 0000000A0018
[ 2.173878] random: systemd-random-: uninitialized urandom read
(512 bytes read)
[ 2.175113] hub 3-3.3:1.0: USB hub found
[ 2.175447] hub 3-3.3:1.0: 4 ports detected
[ 2.297960] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 2.438664] usb 2-7: New USB device found, idVendor=0cf3,
idProduct=3005, bcdDevice= 0.01
[ 2.438667] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.511399] usb 3-3.4: new SuperSpeed Gen 1 USB device number 4
using xhci_hcd
[ 2.530257] usb 3-3.4: New USB device found, idVendor=174c,
idProduct=3074, bcdDevice= 1.00
[ 2.530260] usb 3-3.4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 2.530263] usb 3-3.4: Product: ASM107x
[ 2.530266] usb 3-3.4: Manufacturer: Asmedia
[ 2.530268] usb 3-3.4: SerialNumber: 0000000A0012
[ 2.547375] hub 3-3.4:1.0: USB hub found
[ 2.547772] hub 3-3.4:1.0: 4 ports detected
[ 2.596249] audit: type=1130 audit(1563271473.135:2): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-journald
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 2.611852] systemd-journald[266]: Received request to flush
runtime journal from PID 1
[ 2.672914] audit: type=1130 audit(1563271473.212:3): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 2.762787] audit: type=1130 audit(1563271473.302:4): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 2.827838] nuvoton-cir 00:05: [io 0x0240-0x024f]
[ 2.827910] nuvoton-cir 00:05: [irq 3]
[ 2.827917] nuvoton-cir 00:05: [io 0x0250-0x025f]
[ 2.829966] nuvoton-cir 00:05: activated
[ 2.829995] nuvoton-cir 00:05: found NCT6776F or compatible: chip
id: 0xc3 0x33
[ 2.867984] Registered IR keymap rc-rc6-mce
[ 2.880453] IR RC6 protocol handler initialized
[ 2.890193] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C52B.0001/input/input3
[ 2.904690] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as
/devices/pnp0/00:05/rc/rc0
[ 2.904781] input: Nuvoton w836x7hg Infrared Remote Transceiver as
/devices/pnp0/00:05/rc/rc0/input2
[ 2.913063] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 2.913107] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.918864] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.943203] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 2.943206] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 2.943617] e1000e 0000:00:19.0: Interrupt Throttling Rate
(ints/sec) set to dynamic conservative mode
[ 2.945045] rc rc0: lirc_dev: driver nuvoton-cir registered at
minor = 0, raw IR receiver, no transmitter
[ 2.945113] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID
v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 2.945610] input: Logitech USB Receiver Mouse as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input5
[ 2.945778] input: Logitech USB Receiver Consumer Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input6
[ 2.946453] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters,
655360 ms ovfl timer
[ 2.946455] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.946457] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.946458] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.946460] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.948047] nuvoton-cir 00:05: driver has been successfully loaded
[ 2.994791] Linux agpgart interface v0.103
[ 2.997031] cryptd: max_cpu_qlen set to 1000
[ 3.001440] input: Logitech USB Receiver System Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C52B.0002/input/input7
[ 3.001684] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1:
USB HID v1.11 Mouse [Logitech USB Receiver] on
usb-0000:00:14.0-1/input1
[ 3.002010] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[ 3.115140] AVX2 version of gcm_enc/dec engaged.
[ 3.115143] AES CTR mode by8 optimization enabled
[ 3.133034] audit: type=1130 audit(1563271473.672:5): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 3.154801] cfg80211: Loading compiled-in X.509 certificates for
regulatory database
[ 3.180311] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.182164] platform regulatory.0: Direct firmware load for
regulatory.db failed with error -2
[ 3.182169] cfg80211: failed to load regulatory.db
[ 3.219288] logitech-djreceiver 0003:046D:C52B.0003:
hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:14.0-1/input2
[ 3.248838] iTCO_vendor_support: vendor-support=0
[ 3.264243] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.264311] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2,
TCOBASE=0x1860)
[ 3.264585] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.271393] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 3.271550] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized):
registered PHC clock
[ 3.271721] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.291358] usb 3-3.1: new SuperSpeed Gen 1 USB device number 5
using xhci_hcd
[ 3.308559] usb 3-3.1: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 3.308564] usb 3-3.1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 3.308567] usb 3-3.1: Product: ASMT1053E
[ 3.308570] usb 3-3.1: Manufacturer: asmedia
[ 3.308573] usb 3-3.1: SerialNumber: 12345678925F
[ 3.361426] Bluetooth: Core ver 2.22
[ 3.361456] NET: Registered protocol family 31
[ 3.361458] Bluetooth: HCI device and connection manager initialized
[ 3.361464] Bluetooth: HCI socket layer initialized
[ 3.361467] Bluetooth: L2CAP socket layer initialized
[ 3.361477] Bluetooth: SCO socket layer initialized
[ 3.362097] input: Logitech Unifying Device. Wireless PID:400e
Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input9
[ 3.362247] input: Logitech Unifying Device. Wireless PID:400e
Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input10
[ 3.362398] input: Logitech Unifying Device. Wireless PID:400e
Consumer Control as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input11
[ 3.362509] hid-generic 0003:046D:400E.0004: input,hidraw1: USB HID
v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on
usb-0000:00:14.0-1/input2:1
[ 3.391346] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width
x1) ec:a8:6b:fd:05:6a
[ 3.391686] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.391726] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 3.395348] snd_hda_codec_realtek hdaudioC1D0: autoconfig for
ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 3.395354] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.395357] snd_hda_codec_realtek hdaudioC1D0: hp_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 3.395359] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.395361] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.395364] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 3.406323] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 3.408623] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[ 3.410163] usbcore: registered new interface driver usb-storage
[ 3.428216] mousedev: PS/2 mouse device common for all mice
[ 3.430668] Creating 1 MTD partitions on "intel-spi":
[ 3.430674] 0x000000000000-0x000000800000 : "BIOS"
[ 3.438486] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.438597] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.438706] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 3.451781] scsi host4: uas
[ 3.452273] scsi 4:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 3.452426] usbcore: registered new interface driver uas
[ 3.457937] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks:
(2.00 TB/1.82 TiB)
[ 3.458061] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.458065] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.458227] sd 4:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.458429] sd 4:0:0:0: [sdb] Optimal transfer size 33553920 bytes
[ 3.510656] sdb: sdb1
[ 3.511857] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 3.588295] usbcore: registered new interface driver btusb
[ 3.621504] audit: type=1130 audit(1563271474.162:6): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 3.767428] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 3.767431] fb0: switching to inteldrmfb from EFI VGA
[ 3.767467] Console: switching to colour dummy device 80x25
[ 3.771451] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.773045] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.773047] [drm] Driver supports precise vblank timestamp query.
[ 3.773786] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.802623] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
[ 3.810289] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.811264] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18
[ 3.811677] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 3.840448] fbcon: i915drmfb (fb0) is primary device
[ 3.850573] intel_rapl: Found RAPL domain package
[ 3.850576] intel_rapl: Found RAPL domain core
[ 3.850578] intel_rapl: Found RAPL domain uncore
[ 3.850580] intel_rapl: Found RAPL domain dram
[ 3.882998] ath9k 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.883241] ath: phy0: Set BT/WLAN RX diversity capability
[ 3.898042] Console: switching to colour frame buffer device 240x67
[ 3.920701] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 3.934881] ath: phy0: ASPM enabled: 0x43
[ 3.934886] ath: EEPROM regdomain: 0x60
[ 3.934888] ath: EEPROM indicates we should expect a direct regpair map
[ 3.934892] ath: Country alpha2 being used: 00
[ 3.934893] ath: Regpair used: 0x60
[ 3.948842] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.949506] ieee80211 phy0: Atheros AR9285 Rev:2
mem=0xffff9757c1390000, irq=19
[ 3.954264] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 3.967046] input: HDA Intel HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 3.967153] input: HDA Intel HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 3.967257] input: HDA Intel HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 3.967366] input: HDA Intel HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 4.011299] raid6: avx2x4 gen() 13151 MB/s
[ 4.053931] logitech-hidpp-device 0003:046D:400E.0004: HID++ 2.0
device connected.
[ 4.068098] raid6: avx2x4 xor() 9111 MB/s
[ 4.071369] usb 3-3.2: new SuperSpeed Gen 1 USB device number 6
using xhci_hcd
[ 4.091881] usb 3-3.2: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 4.091885] usb 3-3.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 4.091887] usb 3-3.2: Product: ASMT1053E
[ 4.091888] usb 3-3.2: Manufacturer: asmedia
[ 4.091890] usb 3-3.2: SerialNumber: 123456789260
[ 4.116241] scsi host5: uas
[ 4.116771] scsi 5:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 4.122434] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks:
(3.00 TB/2.73 TiB)
[ 4.122437] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 4.122512] sd 5:0:0:0: [sdc] Write Protect is off
[ 4.122514] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 4.122674] sd 5:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.122873] sd 5:0:0:0: [sdc] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 4.124843] raid6: avx2x2 gen() 12012 MB/s
[ 4.181320] usb 2-3.3: new high-speed USB device number 7 using xhci_hcd
[ 4.181337] raid6: avx2x2 xor() 7957 MB/s
[ 4.237958] raid6: avx2x1 gen() 11425 MB/s
[ 4.290776] usb 2-3.3: New USB device found, idVendor=174c,
idProduct=2074, bcdDevice= 1.00
[ 4.290779] usb 2-3.3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 4.290780] usb 2-3.3: Product: ASM107x
[ 4.290782] usb 2-3.3: Manufacturer: Asmedia
[ 4.290783] usb 2-3.3: SerialNumber: 0000000A0018
[ 4.291747] hub 2-3.3:1.0: USB hub found
[ 4.291935] hub 2-3.3:1.0: 4 ports detected
[ 4.294620] raid6: avx2x1 xor() 8113 MB/s
[ 4.351296] raid6: sse2x4 gen() 8357 MB/s
[ 4.384648] usb 2-3.4: new high-speed USB device number 8 using xhci_hcd
[ 4.407965] raid6: sse2x4 xor() 5286 MB/s
[ 4.464641] raid6: sse2x2 gen() 7003 MB/s
[ 4.494265] usb 2-3.4: New USB device found, idVendor=174c,
idProduct=2074, bcdDevice= 1.00
[ 4.494268] usb 2-3.4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 4.494270] usb 2-3.4: Product: ASM107x
[ 4.494272] usb 2-3.4: Manufacturer: Asmedia
[ 4.494273] usb 2-3.4: SerialNumber: 0000000A0012
[ 4.495216] hub 2-3.4:1.0: USB hub found
[ 4.495485] hub 2-3.4:1.0: 4 ports detected
[ 4.521296] raid6: sse2x2 xor() 4624 MB/s
[ 4.577968] raid6: sse2x1 gen() 6039 MB/s
[ 4.629148] sdc: sdc1
[ 4.630140] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 4.634624] raid6: sse2x1 xor() 4250 MB/s
[ 4.634628] raid6: using algorithm avx2x4 gen() 13151 MB/s
[ 4.634629] raid6: .... xor() 9111 MB/s, rmw enabled
[ 4.634631] raid6: using avx2x2 recovery algorithm
[ 4.637321] xor: automatically using best checksumming function avx
[ 4.776545] Btrfs loaded, crc32c=crc32c-intel
[ 4.777580] BTRFS: device label disk3 devid 1 transid 50547 /dev/sdb1
[ 4.814375] BTRFS info (device sdb1): enabling auto defrag
[ 4.814378] BTRFS info (device sdb1): disk space caching is enabled
[ 4.828715] random: crng init done
[ 4.854300] BTRFS: device label disk4 devid 1 transid 71588 /dev/sdc1
[ 4.899938] BTRFS info (device sdc1): enabling auto defrag
[ 4.899943] BTRFS info (device sdc1): disk space caching is enabled
[ 5.264714] usb 3-3.3.1: new SuperSpeed Gen 1 USB device number 7
using xhci_hcd
[ 5.282235] usb 3-3.3.1: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 5.282241] usb 3-3.3.1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 5.282245] usb 3-3.3.1: Product: ASMT1053E
[ 5.282249] usb 3-3.3.1: Manufacturer: asmedia
[ 5.282252] usb 3-3.3.1: SerialNumber: 123456789262
[ 5.289385] scsi host6: uas
[ 5.290197] scsi 6:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 5.292572] sd 6:0:0:0: [sdd] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 5.292580] sd 6:0:0:0: [sdd] 4096-byte physical blocks
[ 5.292670] sd 6:0:0:0: [sdd] Write Protect is off
[ 5.292674] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 5.292835] sd 6:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.293040] sd 6:0:0:0: [sdd] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 5.356833] sdd: sdd1
[ 5.358177] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 5.567838] BTRFS info (device sdc1): bdev /dev/sdc1 errs: wr 113,
rd 17, flush 0, corrupt 0, gen 0
[ 5.619542] BTRFS: device label disk6 devid 1 transid 333949 /dev/sdd1
[ 5.666880] BTRFS info (device sdd1): enabling auto defrag
[ 5.666885] BTRFS info (device sdd1): disk space caching is enabled
[ 6.754791] usb 3-3.4.2: new SuperSpeed Gen 1 USB device number 8
using xhci_hcd
[ 6.772183] usb 3-3.4.2: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 6.772189] usb 3-3.4.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 6.772193] usb 3-3.4.2: Product: ASMT1053E
[ 6.772196] usb 3-3.4.2: Manufacturer: asmedia
[ 6.772199] usb 3-3.4.2: SerialNumber: 123456789263
[ 6.779807] scsi host7: uas
[ 6.780637] scsi 7:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 6.783295] sd 7:0:0:0: [sde] 15628053168 512-byte logical blocks:
(8.00 TB/7.28 TiB)
[ 6.783301] sd 7:0:0:0: [sde] 4096-byte physical blocks
[ 6.783423] sd 7:0:0:0: [sde] Write Protect is off
[ 6.783428] sd 7:0:0:0: [sde] Mode Sense: 43 00 00 00
[ 6.783586] sd 7:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.783806] sd 7:0:0:0: [sde] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 6.829088] sde: sde1
[ 6.830476] sd 7:0:0:0: [sde] Attached SCSI disk
[ 6.844703] usb 3-3.3.2: new SuperSpeed Gen 1 USB device number 9
using xhci_hcd
[ 6.862035] usb 3-3.3.2: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 6.862040] usb 3-3.3.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 6.862042] usb 3-3.3.2: Product: ASMT1053E
[ 6.862044] usb 3-3.3.2: Manufacturer: asmedia
[ 6.862046] usb 3-3.3.2: SerialNumber: 123456789265
[ 6.888971] scsi host8: uas
[ 6.889614] scsi 8:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 6.892150] sd 8:0:0:0: [sdf] 15628053168 512-byte logical blocks:
(8.00 TB/7.28 TiB)
[ 6.892159] sd 8:0:0:0: [sdf] 4096-byte physical blocks
[ 6.892276] sd 8:0:0:0: [sdf] Write Protect is off
[ 6.892286] sd 8:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 6.892484] sd 8:0:0:0: [sdf] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.892737] sd 8:0:0:0: [sdf] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 6.942067] sdf: sdf1
[ 6.943478] sd 8:0:0:0: [sdf] Attached SCSI disk
[ 7.008226] BTRFS: device label disk7 devid 1 transid 384253 /dev/sde1
[ 7.057579] BTRFS info (device sde1): enabling auto defrag
[ 7.057582] BTRFS info (device sde1): disk space caching is enabled
[ 7.057583] BTRFS info (device sde1): has skinny extents
[ 7.120583] BTRFS: device label disk2 devid 1 transid 248621 /dev/sdf1
[ 7.164656] BTRFS info (device sdf1): enabling auto defrag
[ 7.164659] BTRFS info (device sdf1): disk space caching is enabled
[ 7.164661] BTRFS info (device sdf1): has skinny extents
[ 7.621388] usb 3-3.3.3: new SuperSpeed Gen 1 USB device number 10
using xhci_hcd
[ 7.638819] usb 3-3.3.3: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 7.638826] usb 3-3.3.3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 7.638830] usb 3-3.3.3: Product: ASMT1053E
[ 7.638833] usb 3-3.3.3: Manufacturer: asmedia
[ 7.638836] usb 3-3.3.3: SerialNumber: 123456789267
[ 7.665323] scsi host9: uas
[ 7.666190] scsi 9:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 7.668570] sd 9:0:0:0: [sdg] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 7.668575] sd 9:0:0:0: [sdg] 4096-byte physical blocks
[ 7.668670] sd 9:0:0:0: [sdg] Write Protect is off
[ 7.668674] sd 9:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 7.668846] sd 9:0:0:0: [sdg] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 7.669102] sd 9:0:0:0: [sdg] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 7.722495] sdg: sdg1
[ 7.723887] sd 9:0:0:0: [sdg] Attached SCSI disk
[ 7.893310] BTRFS: device label disk5 devid 1 transid 198813 /dev/sdg1
[ 7.937539] BTRFS info (device sdg1): enabling auto defrag
[ 7.937543] BTRFS info (device sdg1): disk space caching is enabled
[ 8.401384] usb 3-3.3.4: new SuperSpeed Gen 1 USB device number 11
using xhci_hcd
[ 8.418800] usb 3-3.3.4: New USB device found, idVendor=174c,
idProduct=55aa, bcdDevice= 1.00
[ 8.418806] usb 3-3.3.4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 8.418810] usb 3-3.3.4: Product: ASMT1053E
[ 8.418813] usb 3-3.3.4: Manufacturer: asmedia
[ 8.418816] usb 3-3.3.4: SerialNumber: 123456789264
[ 8.426796] scsi host10: uas
[ 8.427471] scsi 10:0:0:0: Direct-Access ASMT 2105
0 PQ: 0 ANSI: 6
[ 8.429267] sd 10:0:0:0: [sdh] 7814037168 512-byte logical blocks:
(4.00 TB/3.64 TiB)
[ 8.429276] sd 10:0:0:0: [sdh] 4096-byte physical blocks
[ 8.429375] sd 10:0:0:0: [sdh] Write Protect is off
[ 8.429382] sd 10:0:0:0: [sdh] Mode Sense: 43 00 00 00
[ 8.429571] sd 10:0:0:0: [sdh] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 8.429859] sd 10:0:0:0: [sdh] Optimal transfer size 33553920 bytes
not a multiple of physical block size (4096 bytes)
[ 8.516478] input: Logitech K400 as
/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:400E.0004/input/input23
[ 8.517299] logitech-hidpp-device 0003:046D:400E.0004:
input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on
usb-0000:00:14.0-1/input2:1
[ 8.964468] audit: type=1131 audit(1563271479.502:7): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 9.300249] sdh: sdh1
[ 9.301870] sd 10:0:0:0: [sdh] Attached SCSI disk
[ 9.499103] BTRFS: device label disk1 devid 1 transid 564351 /dev/sdh1
[ 9.549915] BTRFS info (device sdh1): enabling auto defrag
[ 9.549919] BTRFS info (device sdh1): disk space caching is enabled
[ 11.040906] BTRFS critical (device sdb1): corrupt leaf: root=5
block=3210507616256 slot=24 ino=265, invalid inode generation: has
140000853721088 expect [0, 50548]
[ 11.040912] BTRFS error (device sdb1): block=3210507616256 read
time tree block corruption detected
[ 11.734989] audit: type=1130 audit(1563271482.275:8): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=emergency comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=?
res=success'
[ 11.810131] audit: type=1130 audit(1563271482.348:9): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 11.828681] audit: type=1127 audit(1563271482.368:10): pid=598
uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp"
exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=?
terminal=? res=success'
[ 11.833931] audit: type=1130 audit(1563271482.372:11): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 12.227881] audit: type=1130 audit(1563271482.765:12): pid=1 uid=0
auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd
comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=?
terminal=? res=success'
[ 13.781261] BTRFS critical (device sdc1): corrupt leaf: root=5
block=5051749396480 slot=24 ino=265, invalid inode generation: has
140471277748224 expect [0, 71589]
[ 13.781268] BTRFS error (device sdc1): block=5051749396480 read
time tree block corruption detected
On Fri, Jul 12, 2019 at 2:18 PM Qu Wenruo <quwenruo.btrfs@gmx.com> wrote:
>
>
>
> On 2019/7/12 下午7:05, mangoblues@gmail.com wrote:
> > Hi,
> >
> > After updating to kernel 5.2 (archlinux): 2 out of my 7 btrfs drives
> > fail to mount on boot.
> >
> > Error: can't read superblock on /dev/sdb1 and /dev/sdc1.
>
> Pull dmesg output please.
>
> Thanks,
> Qu
>
> >
> > Going back to kernel 5.1.16 (and 4.19 also) fixes the problem. Btrfsck
> > reports the 2 drives are OK.
> >
> > What can I do to fix this ?
> >
> > Thanks.
> >
> > $ btrfs fi show
> >
> > Label: 'disk3' uuid: 37d68257-a2bf-44e4-82e6-7bda35d3af3c
> > Total devices 1 FS bytes used 1.77TiB
> > devid 1 size 1.82TiB used 1.82TiB path /dev/sdb1
> >
> > Label: 'disk4' uuid: 8b72d7bd-603c-41c0-a395-a763ffe0de8b
> > Total devices 1 FS bytes used 2.67TiB
> > devid 1 size 2.73TiB used 2.73TiB path /dev/sdc1
> >
> > Label: 'disk5' uuid: 1728d60b-bdf2-4baa-8372-de7014d85e1d
> > Total devices 1 FS bytes used 3.59TiB
> > devid 1 size 3.64TiB used 3.64TiB path /dev/sdg1
> >
> > Label: 'disk7' uuid: 5e9437b5-bf53-4135-8b25-52539cfc491e
> > Total devices 1 FS bytes used 6.66TiB
> > devid 1 size 7.28TiB used 7.23TiB path /dev/sde1
> >
> > Label: 'disk6' uuid: ce325155-0922-4c62-9f5d-70cbc1726b5c
> > Total devices 1 FS bytes used 3.47TiB
> > devid 1 size 3.64TiB used 3.63TiB path /dev/sdd1
> >
> > Label: 'disk1' uuid: b9c65214-b1dc-4a97-b798-dc9639177880
> > Total devices 1 FS bytes used 3.31TiB
> > devid 1 size 3.64TiB used 3.62TiB path /dev/sdh1
> >
> > Label: 'disk2' uuid: d77e4116-de32-4ff4-938c-9c6eea6cdd42
> > Total devices 1 FS bytes used 6.83TiB
> > devid 1 size 7.28TiB used 7.26TiB path /dev/sdf1
> >
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-16 10:49 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-12 11:05 [BUG] Kernel 5.2: mount fails with can't read superblock on /dev/sdb1 (kernel 5.1.16 and 4.19 is fine) mangoblues
2019-07-12 12:18 ` Qu Wenruo
2019-07-12 12:21 ` Qu Wenruo
2019-07-16 10:48 ` mangoblues
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).