From: Stephane Grosjean <s.grosjean@peak-system.com>
To: linux-can Mailing List <linux-can@vger.kernel.org>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>,
Oliver Hartkopp <socketcan@hartkopp.net>
Subject: [PATCH 1/2] peak_usb: rename usb option cmds definition and structs
Date: Mon, 16 Mar 2015 11:57:52 +0100 [thread overview]
Message-ID: <1426503473-7403-1-git-send-email-s.grosjean@peak-system.com> (raw)
The PUCAN_CMD_RX_FRAME_(ENABLE|DISABLE) command has extended its purpose
and was therefore renamed to PUCAN_CMD_SET_(EN|DIS)_OPTION.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
---
drivers/net/can/usb/peak_usb/pcan_ucan.h | 14 +++++-----
drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 42 +++++++++++++++---------------
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/net/can/usb/peak_usb/pcan_ucan.h b/drivers/net/can/usb/peak_usb/pcan_ucan.h
index 1ba7c25..1fb3330 100644
--- a/drivers/net/can/usb/peak_usb/pcan_ucan.h
+++ b/drivers/net/can/usb/peak_usb/pcan_ucan.h
@@ -26,8 +26,8 @@
#define PUCAN_CMD_FILTER_STD 0x008
#define PUCAN_CMD_TX_ABORT 0x009
#define PUCAN_CMD_WR_ERR_CNT 0x00a
-#define PUCAN_CMD_RX_FRAME_ENABLE 0x00b
-#define PUCAN_CMD_RX_FRAME_DISABLE 0x00c
+#define PUCAN_CMD_SET_EN_OPTION 0x00b
+#define PUCAN_CMD_CLR_DIS_OPTION 0x00c
#define PUCAN_CMD_END_OF_COLLECTION 0x3ff
/* uCAN received messages list */
@@ -101,14 +101,14 @@ struct __packed pucan_wr_err_cnt {
u16 unused;
};
-/* uCAN RX_FRAME_ENABLE command fields */
-#define PUCAN_FLTEXT_ERROR 0x0001
-#define PUCAN_FLTEXT_BUSLOAD 0x0002
+/* uCAN SET_EN/CLR_DIS _OPTION command fields */
+#define PUCAN_OPTION_ERROR 0x0001
+#define PUCAN_OPTION_BUSLOAD 0x0002
-struct __packed pucan_filter_ext {
+struct __packed pucan_options {
__le16 opcode_channel;
- __le16 ext_mask;
+ __le16 options;
u32 unused;
};
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
index 0bac0f1..7506a83 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -110,13 +110,13 @@ struct __packed pcan_ufd_led {
u8 unused[5];
};
-/* Extended usage of uCAN commands CMD_RX_FRAME_xxxABLE for PCAN-USB Pro FD */
+/* Extended usage of uCAN commands CMD_xxx_xx_OPTION for PCAN-USB Pro FD */
#define PCAN_UFD_FLTEXT_CALIBRATION 0x8000
-struct __packed pcan_ufd_filter_ext {
+struct __packed pcan_ufd_options {
__le16 opcode_channel;
- __le16 ext_mask;
+ __le16 ucan_mask;
u16 unused;
__le16 usb_mask;
};
@@ -321,21 +321,21 @@ static int pcan_usb_fd_set_filter_std(struct peak_usb_device *dev, int idx,
return pcan_usb_fd_send_cmd(dev, cmd);
}
-/* set/unset notifications filter:
+/* set/unset options
*
- * onoff sets(1)/unset(0) notifications
- * mask each bit defines a kind of notification to set/unset
+ * onoff set(1)/unset(0) options
+ * mask each bit defines a kind of options to set/unset
*/
-static int pcan_usb_fd_set_filter_ext(struct peak_usb_device *dev,
- bool onoff, u16 ext_mask, u16 usb_mask)
+static int pcan_usb_fd_set_options(struct peak_usb_device *dev,
+ bool onoff, u16 ucan_mask, u16 usb_mask)
{
- struct pcan_ufd_filter_ext *cmd = pcan_usb_fd_cmd_buffer(dev);
+ struct pcan_ufd_options *cmd = pcan_usb_fd_cmd_buffer(dev);
cmd->opcode_channel = pucan_cmd_opcode_channel(dev,
- (onoff) ? PUCAN_CMD_RX_FRAME_ENABLE :
- PUCAN_CMD_RX_FRAME_DISABLE);
+ (onoff) ? PUCAN_CMD_SET_EN_OPTION :
+ PUCAN_CMD_CLR_DIS_OPTION);
- cmd->ext_mask = cpu_to_le16(ext_mask);
+ cmd->ucan_mask = cpu_to_le16(ucan_mask);
cmd->usb_mask = cpu_to_le16(usb_mask);
/* send the command */
@@ -770,9 +770,9 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev)
&pcan_usb_pro_fd);
/* enable USB calibration messages */
- err = pcan_usb_fd_set_filter_ext(dev, 1,
- PUCAN_FLTEXT_ERROR,
- PCAN_UFD_FLTEXT_CALIBRATION);
+ err = pcan_usb_fd_set_options(dev, 1,
+ PUCAN_OPTION_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
}
pdev->usb_if->dev_opened_count++;
@@ -806,9 +806,9 @@ static int pcan_usb_fd_stop(struct peak_usb_device *dev)
/* turn off special msgs for that interface if no other dev opened */
if (pdev->usb_if->dev_opened_count == 1)
- pcan_usb_fd_set_filter_ext(dev, 0,
- PUCAN_FLTEXT_ERROR,
- PCAN_UFD_FLTEXT_CALIBRATION);
+ pcan_usb_fd_set_options(dev, 0,
+ PUCAN_OPTION_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
pdev->usb_if->dev_opened_count--;
return 0;
@@ -937,9 +937,9 @@ static void pcan_usb_fd_exit(struct peak_usb_device *dev)
if (dev->ctrl_idx == 0) {
/* turn off calibration message if any device were opened */
if (pdev->usb_if->dev_opened_count > 0)
- pcan_usb_fd_set_filter_ext(dev, 0,
- PUCAN_FLTEXT_ERROR,
- PCAN_UFD_FLTEXT_CALIBRATION);
+ pcan_usb_fd_set_options(dev, 0,
+ PUCAN_OPTION_ERROR,
+ PCAN_UFD_FLTEXT_CALIBRATION);
/* tell USB adapter that the driver is being unloaded */
pcan_usb_fd_drv_loaded(dev, 0);
--
1.9.1
next reply other threads:[~2015-03-16 10:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 10:57 Stephane Grosjean [this message]
2015-03-16 10:57 ` [PATCH 2/2] peak_usb_fd: add support for ISO / non-ISO mode switching Stephane Grosjean
2015-03-16 11:21 ` [PATCH 1/2] peak_usb: rename usb option cmds definition and structs Oliver Hartkopp
2015-03-17 11:27 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426503473-7403-1-git-send-email-s.grosjean@peak-system.com \
--to=s.grosjean@peak-system.com \
--cc=linux-can@vger.kernel.org \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).