[PATCH net 2/2] can: m_can: remove support for custom bit timing, take #2

[Marc Kleine-Budde <mkl@pengutronix.de>]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Now when Intel Elkhart Lake uses again common bit timing and there are
no other users for custom bit timing, we can bring back the changes
done by the commit 0ddd83fbebbc ("can: m_can: remove support for
custom bit timing").

This effectively reverts commit ea768b2ffec6 ("Revert "can: m_can:
remove support for custom bit timing"") while taking into account
commit ea22ba40debe ("can: m_can: make custom bittiming fields const")
and commit 7d4a101c0bd3 ("can: dev: add sanity check in
can_set_static_ctrlmode()").

Link: https://lore.kernel.org/all/20220512124144.536850-2-jarkko.nikula@linux.intel.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/m_can.c | 24 ++++++------------------
 drivers/net/can/m_can/m_can.h |  3 ---
 2 files changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index b3b5bc1c803b..088bb1bcf1ef 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1495,34 +1495,22 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
 		err = can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
 		if (err)
 			return err;
-		cdev->can.bittiming_const = cdev->bit_timing ?
-			cdev->bit_timing : &m_can_bittiming_const_30X;
-
-		cdev->can.data_bittiming_const = cdev->data_timing ?
-			cdev->data_timing :
-			&m_can_data_bittiming_const_30X;
+		cdev->can.bittiming_const = &m_can_bittiming_const_30X;
+		cdev->can.data_bittiming_const = &m_can_data_bittiming_const_30X;
 		break;
 	case 31:
 		/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
 		err = can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
 		if (err)
 			return err;
-		cdev->can.bittiming_const = cdev->bit_timing ?
-			cdev->bit_timing : &m_can_bittiming_const_31X;
-
-		cdev->can.data_bittiming_const = cdev->data_timing ?
-			cdev->data_timing :
-			&m_can_data_bittiming_const_31X;
+		cdev->can.bittiming_const = &m_can_bittiming_const_31X;
+		cdev->can.data_bittiming_const = &m_can_data_bittiming_const_31X;
 		break;
 	case 32:
 	case 33:
 		/* Support both MCAN version v3.2.x and v3.3.0 */
-		cdev->can.bittiming_const = cdev->bit_timing ?
-			cdev->bit_timing : &m_can_bittiming_const_31X;
-
-		cdev->can.data_bittiming_const = cdev->data_timing ?
-			cdev->data_timing :
-			&m_can_data_bittiming_const_31X;
+		cdev->can.bittiming_const = &m_can_bittiming_const_31X;
+		cdev->can.data_bittiming_const = &m_can_data_bittiming_const_31X;
 
 		cdev->can.ctrlmode_supported |=
 			(m_can_niso_supported(cdev) ?
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index 2c5d40997168..d18b515e6ccc 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -85,9 +85,6 @@ struct m_can_classdev {
 	struct sk_buff *tx_skb;
 	struct phy *transceiver;
 
-	const struct can_bittiming_const *bit_timing;
-	const struct can_bittiming_const *data_timing;
-
 	struct m_can_ops *ops;
 
 	int version;
-- 
2.35.1