From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 06/29] can: slcan: clean up if/else
Date: Wed, 20 Jul 2022 10:10:11 +0200 [thread overview]
Message-ID: <20220720081034.3277385-7-mkl@pengutronix.de> (raw)
In-Reply-To: <20220720081034.3277385-1-mkl@pengutronix.de>
Remove braces after if() for single statement blocks, also remove else
after return() in if() block.
Link: https://lore.kernel.org/all/20220704125954.1587880-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/slcan/slcan-core.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/can/slcan/slcan-core.c b/drivers/net/can/slcan/slcan-core.c
index 70a6d1ba46eb..d9bf75a25988 100644
--- a/drivers/net/can/slcan/slcan-core.c
+++ b/drivers/net/can/slcan/slcan-core.c
@@ -469,19 +469,19 @@ static void slcan_unesc(struct slcan *sl, unsigned char s)
{
if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */
if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
- (sl->rcount > 4)) {
+ sl->rcount > 4)
slc_bump(sl);
- }
+
sl->rcount = 0;
} else {
if (!test_bit(SLF_ERROR, &sl->flags)) {
if (sl->rcount < SLC_MTU) {
sl->rbuff[sl->rcount++] = s;
return;
- } else {
- sl->dev->stats.rx_over_errors++;
- set_bit(SLF_ERROR, &sl->flags);
}
+
+ sl->dev->stats.rx_over_errors++;
+ set_bit(SLF_ERROR, &sl->flags);
}
}
}
@@ -1104,9 +1104,8 @@ static void __exit slcan_exit(void)
continue;
sl = netdev_priv(dev);
- if (sl->tty) {
+ if (sl->tty)
netdev_err(dev, "tty discipline still running\n");
- }
slc_close(dev);
unregister_candev(dev);
--
2.35.1
next prev parent reply other threads:[~2022-07-20 8:12 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-20 8:10 [PATCH net-next 0/29] pull-request: can-next 2022-07-20 Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 01/29] can: slcan: use scnprintf() as a hardening measure Marc Kleine-Budde
2022-07-20 9:30 ` patchwork-bot+netdevbpf
2022-07-20 8:10 ` [PATCH net-next 02/29] can: slcan: convert comments to network style comments Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 03/29] can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level() Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 04/29] can: slcan: fix whitespace issues Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 05/29] can: slcan: convert comparison to NULL into !val Marc Kleine-Budde
2022-07-20 8:10 ` Marc Kleine-Budde [this message]
2022-07-20 8:10 ` [PATCH net-next 07/29] dt-bindings: can: sja1000: Convert to json-schema Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 08/29] dt-bindings: can: nxp,sja1000: Document RZ/N1{D,S} support Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 09/29] can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 10/29] can: sja1000: Use device_get_match_data to get device data Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 11/29] can: sja1000: Change the return type as void for SoC specific init Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 12/29] can: slcan: do not sleep with a spin lock held Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 13/29] can: c_can: remove wrong comment Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 14/29] can: ctucanfd: Update CTU CAN FD IP core registers to match version 3.x Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 15/29] can: peak_usb: pcan_dump_mem(): mark input prompt and data pointer as const Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 16/29] can: peak_usb: correction of an initially misnamed field name Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 17/29] can: peak_usb: include support for a new MCU Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 18/29] can: pch_can: do not report txerr and rxerr during bus-off Marc Kleine-Budde
2022-07-21 15:27 ` Nathan Chancellor
2022-07-21 15:47 ` Marc Kleine-Budde
2022-07-21 16:11 ` Vincent MAILHOL
2022-07-21 16:20 ` Nathan Chancellor
2022-07-21 16:51 ` Jakub Kicinski
2022-07-21 16:00 ` [PATCH] can: pch_can: initialize errc before using it Vincent Mailhol
2022-07-21 16:02 ` Nathan Chancellor
2022-07-20 8:10 ` [PATCH net-next 19/29] can: rcar_can: do not report txerr and rxerr during bus-off Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 20/29] can: sja1000: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 21/29] can: slcan: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 22/29] can: hi311x: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 23/29] can: sun4i_can: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 24/29] can: kvaser_usb_hydra: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 25/29] can: kvaser_usb_leaf: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 26/29] can: usb_8dev: " Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 27/29] can: error: specify the values of data[5..7] of CAN error frames Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 28/29] can: add CAN_ERR_CNT flag to notify availability of error counter Marc Kleine-Budde
2022-07-20 8:10 ` [PATCH net-next 29/29] can: error: add definitions for the different CAN error thresholds Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720081034.3277385-7-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).