From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
To: Marc Kleine-Budde <mkl@pengutronix.de>, linux-can@vger.kernel.org
Cc: "Martin Elshuber" <martin.elshuber@theobroma-systems.com>,
"Jakob Unterwurzacher"
<jakob.unterwurzacher@theobroma-systems.com>,
"Maximilian Schneider" <mws@schneidersoft.net>,
"Peter Fink" <pfink@christ-es.de>,
"Jeroen Hofstee" <jhofstee@victronenergy.com>,
"Christoph Möhring" <cmoehring@christ-es.de>,
"John Whittington" <git@jbrengineering.co.uk>,
"Vasanth Sadhasivan" <vasanth.sadhasivan@samsara.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Vincent Mailhol" <mailhol.vincent@wanadoo.fr>
Subject: [PATCH 2/2] can: gs_usb: remove gs_can::iface
Date: Thu, 8 Dec 2022 17:11:42 +0900 [thread overview]
Message-ID: <20221208081142.16936-3-mailhol.vincent@wanadoo.fr> (raw)
In-Reply-To: <20221208081142.16936-1-mailhol.vincent@wanadoo.fr>
The iface field of struct gs_can is only used to retrieve the
usb_device which is already available in gs_can::udev.
Replace each occurrence of interface_to_usbdev(dev->iface) with
dev->udev. This done, remove gs_can::iface.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
---
drivers/net/can/usb/gs_usb.c | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c
index 838744d2ce34..d476c2884008 100644
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -299,7 +299,6 @@ struct gs_can {
struct net_device *netdev;
struct usb_device *udev;
- struct usb_interface *iface;
struct can_bittiming_const bt_const, data_bt_const;
unsigned int channel; /* channel number */
@@ -383,8 +382,7 @@ static int gs_cmd_reset(struct gs_can *dev)
.mode = GS_CAN_MODE_RESET,
};
- return usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_MODE,
+ return usb_control_msg_send(dev->udev, 0, GS_USB_BREQ_MODE,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0, &dm, sizeof(dm), 1000,
GFP_KERNEL);
@@ -396,8 +394,7 @@ static inline int gs_usb_get_timestamp(const struct gs_can *dev,
__le32 timestamp;
int rc;
- rc = usb_control_msg_recv(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_TIMESTAMP,
+ rc = usb_control_msg_recv(dev->udev, 0, GS_USB_BREQ_TIMESTAMP,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0,
×tamp, sizeof(timestamp),
@@ -674,8 +671,7 @@ static int gs_usb_set_bittiming(struct net_device *netdev)
};
/* request bit timings */
- return usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_BITTIMING,
+ return usb_control_msg_send(dev->udev, 0, GS_USB_BREQ_BITTIMING,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0, &dbt, sizeof(dbt), 1000,
GFP_KERNEL);
@@ -698,8 +694,7 @@ static int gs_usb_set_data_bittiming(struct net_device *netdev)
request = GS_USB_BREQ_QUIRK_CANTACT_PRO_DATA_BITTIMING;
/* request data bit timings */
- return usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- request,
+ return usb_control_msg_send(dev->udev, 0, request,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0, &dbt, sizeof(dbt), 1000,
GFP_KERNEL);
@@ -941,8 +936,7 @@ static int gs_can_open(struct net_device *netdev)
/* finally start device */
dev->can.state = CAN_STATE_ERROR_ACTIVE;
dm.flags = cpu_to_le32(flags);
- rc = usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_MODE,
+ rc = usb_control_msg_send(dev->udev, 0, GS_USB_BREQ_MODE,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0, &dm, sizeof(dm), 1000,
GFP_KERNEL);
@@ -969,8 +963,7 @@ static int gs_usb_get_state(const struct net_device *netdev,
struct gs_device_state ds;
int rc;
- rc = usb_control_msg_recv(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_GET_STATE,
+ rc = usb_control_msg_recv(dev->udev, 0, GS_USB_BREQ_GET_STATE,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0,
&ds, sizeof(ds),
@@ -1064,8 +1057,7 @@ static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
else
imode.mode = cpu_to_le32(GS_CAN_IDENTIFY_OFF);
- return usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_IDENTIFY,
+ return usb_control_msg_send(dev->udev, 0, GS_USB_BREQ_IDENTIFY,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0, &imode, sizeof(imode), 100,
GFP_KERNEL);
@@ -1118,8 +1110,7 @@ static int gs_usb_get_termination(struct net_device *netdev, u16 *term)
struct gs_device_termination_state term_state;
int rc;
- rc = usb_control_msg_recv(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_GET_TERMINATION,
+ rc = usb_control_msg_recv(dev->udev, 0, GS_USB_BREQ_GET_TERMINATION,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0,
&term_state, sizeof(term_state), 1000,
@@ -1145,8 +1136,7 @@ static int gs_usb_set_termination(struct net_device *netdev, u16 term)
else
term_state.state = cpu_to_le32(GS_CAN_TERMINATION_STATE_OFF);
- return usb_control_msg_send(interface_to_usbdev(dev->iface), 0,
- GS_USB_BREQ_SET_TERMINATION,
+ return usb_control_msg_send(dev->udev, 0, GS_USB_BREQ_SET_TERMINATION,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
dev->channel, 0,
&term_state, sizeof(term_state), 1000,
@@ -1210,7 +1200,6 @@ static struct gs_can *gs_make_candev(unsigned int channel,
dev->bt_const.brp_inc = le32_to_cpu(bt_const.brp_inc);
dev->udev = interface_to_usbdev(intf);
- dev->iface = intf;
dev->netdev = netdev;
dev->channel = channel;
--
2.25.1
next prev parent reply other threads:[~2022-12-08 8:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 8:11 [PATCH 0/2] can: usb: remove pointers to struct usb_interface in device's priv structures Vincent Mailhol
2022-12-08 8:11 ` [PATCH 1/2] can: ucan: remove unused ucan_priv::intf Vincent Mailhol
2022-12-08 8:11 ` Vincent Mailhol [this message]
2022-12-08 9:10 ` [PATCH 0/2] can: usb: remove pointers to struct usb_interface in device's priv structures Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221208081142.16936-3-mailhol.vincent@wanadoo.fr \
--to=mailhol.vincent@wanadoo.fr \
--cc=cmoehring@christ-es.de \
--cc=git@jbrengineering.co.uk \
--cc=jakob.unterwurzacher@theobroma-systems.com \
--cc=jhofstee@victronenergy.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.elshuber@theobroma-systems.com \
--cc=mkl@pengutronix.de \
--cc=mws@schneidersoft.net \
--cc=netdev@vger.kernel.org \
--cc=pfink@christ-es.de \
--cc=vasanth.sadhasivan@samsara.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).