messages from 2023-01-16 18:05:49 to 2023-02-02 16:45:51 UTC [more...]
[PATCH v1] can: peak_usb: export PCAN device ID as sysfs device attribute
2023-02-02 16:45 UTC (11+ messages)
` [RESEND PATCH v3 0/8] can: peak_usb: Introduce configurable CAN channel ID
` [PATCH v3 1/8] can: peak_usb: rename device_id to "
` [PATCH v3 2/8] can: peak_usb: add callback to read CAN channel ID of PEAK CAN-FD devices
` [PATCH v3 3/8] can: peak_usb: allow flashing of the CAN channel ID
` [PATCH v3 4/8] can: peak_usb: replace unregister_netdev() with unregister_candev()
` [PATCH v3 5/8] can: peak_usb: add ethtool interface to user-configurable CAN channel identifier
` [PATCH v3 6/8] can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
` [PATCH v3 7/8] can: peak_usb: align CAN channel ID format in log with sysfs attribute
` [PATCH v3 8/8] can: peak_usb: Reorder include directives alphabetically
[PATCH v2 0/8] can: ems_pci: Add support for CPC-PCIe v3
2023-02-02 15:30 UTC (10+ messages)
` [PATCH v2 1/8] can: ems_pci: Fix code style, copyright and email address
` [PATCH v2 2/8] can: ems_pci: Add Asix AX99100 definitions
` [PATCH v2 3/8] can: ems_pci: Initialize BAR registers
` [PATCH v2 4/8] can: ems_pci: Add read/write register and post irq functions
` [PATCH v2 5/8] can: ems_pci: Initialize CAN controller base addresses
` [PATCH v2 6/8] can: ems_pci: Add IRQ enable
` [PATCH v2 7/8] can: ems_pci: Deassert hardware reset
` [PATCH v2 8/8] can: ems_pci: Add myself as module author
[PATCH] can: etas_es58x: do not send disable channel command if device is unplugged
2023-02-02 15:35 UTC (3+ messages)
[PATCH 2/3] can: esd_usb: Improved behavior on esd CAN_ERROR_EXT event (2)
2023-02-02 15:22 UTC (11+ messages)
` [PATCH 3/3] can: esd_usb: Improved decoding for ESD_EV_CAN_ERROR_EXT messages
[PATCH 00/12] can: rcar_canfd: Add support for R-Car V4H systems
2023-02-02 15:06 UTC (26+ messages)
` [PATCH 01/12] dt-bindings: can: renesas,rcar-canfd: R-Car V3U is R-Car Gen4
` [PATCH 02/12] dt-bindings: can: renesas,rcar-canfd: Document R-Car V4H support
` [PATCH 03/12] dt-bindings: can: renesas,rcar-canfd: Add transceiver support
` [PATCH 04/12] can: rcar_canfd: Fix R-Car V3U CAN mode selection
` [PATCH 05/12] can: rcar_canfd: Fix R-Car V3U GAFLCFG field accesses
` [PATCH 06/12] can: rcar_canfd: Abstract out DCFG address differences
` [PATCH 07/12] can: rcar_canfd: Add support for R-Car Gen4
` [PATCH 08/12] can: rcar_canfd: Fix R-Car Gen4 DCFG.DSJW field width
` [PATCH 09/12] can: rcar_canfd: Fix R-Car Gen4 CFCC.CFTML "
` [PATCH 10/12] can: rcar_canfd: Sort included header files
` [PATCH 11/12] can: rcar_canfd: Add helper variable dev
` [PATCH 12/12] can: rcar_canfd: Add transceiver support
[PATCH can-next] can: gw: give feedback on missing CGW_FLAGS_CAN_IIF_TX_OK flag
2023-02-02 14:54 UTC (2+ messages)
[PATCH v2] can: mcp251xfd: regmap: optimizing transfer size for CRC transfers size 1
2023-02-02 14:18 UTC
[PATCH] can: mcp251xfd: optimizing transfer size for CRC transfers size 1
2023-02-02 14:10 UTC (2+ messages)
[PATCH net 0/5] pull-request: can 2023-02-02
2023-02-02 13:47 UTC (9+ messages)
` [PATCH net 1/5] can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
` [PATCH net 2/5] can: raw: fix CAN FD frame transmissions over CAN XL devices
` [PATCH net 3/5] can: isotp: handle wait_event_interruptible() return values
` [PATCH net 4/5] can: isotp: split tx timer into transmission and timeout
` [PATCH net 5/5] can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
[PATCH v2 00/17] can: bittiming: cleanups and rework SJW handling
2023-02-02 12:17 UTC (25+ messages)
` [PATCH v2 01/17] can: bittiming(): replace open coded variants of can_bit_time()
` [PATCH v2 02/17] can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
` [PATCH v2 03/17] can: bittiming: can_fixup_bittiming(): set effective tq
` [PATCH v2 04/17] can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
` [PATCH v2 05/17] can: dev: register_candev(): ensure that bittiming const are valid
` [PATCH v2 06/17] can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
` [PATCH v2 07/17] can: netlink: can_validate(): validate sample point for CAN and CAN-FD
` [PATCH v2 08/17] can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
` [PATCH v2 09/17] can: bittiming: can_changelink() pass extack down callstack
` [PATCH v2 10/17] can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
` [PATCH v2 11/17] can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
` [PATCH v2 12/17] can: bittiming: can_sjw_check(): "
` [PATCH v2 13/17] can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
` [PATCH v2 14/17] can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
` [PATCH v2 15/17] can: bittiming: can_calc_bittiming(): clean up SJW handling
` [PATCH v2 16/17] can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
` [PATCH v2 17/17] can: bittiming: can_validate_bitrate(): report error via netlink
[PATCH 0/5] can: bittiming: improve SJW handling and default
2023-02-02 10:29 UTC (12+ messages)
` [PATCH 2/5] can: bittiming: can_calc_bittiming(): make use of min3()
[PATCH v2] can: raw: fix CAN FD frame transmissions over CAN XL devices
2023-01-31 12:00 UTC (3+ messages)
[PATCH v4] can: raw: fix CAN FD frame transmissions over CAN XL devices
2023-01-31 11:26 UTC
[PATCH v3] can: raw: fix CAN FD frame transmissions over CAN XL devices
2023-01-31 10:56 UTC
[PATCH] can: raw: fix CAN FD frame transmissions over CAN XL devices
2023-01-31 9:10 UTC
[PATCH] can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
2023-01-30 15:43 UTC
[PATCH v2 00/18] can: m_can: Optimizations for m_can/tcan part 2
2023-01-30 8:05 UTC (24+ messages)
` [PATCH v2 01/18] can: tcan4x5x: Remove reserved register 0x814 from writable table
` [PATCH v2 02/18] can: tcan4x5x: Check size of mram configuration
` [PATCH v2 03/18] can: m_can: Remove repeated check for is_peripheral
` [PATCH v2 04/18] can: m_can: Always acknowledge all interrupts
` [PATCH v2 05/18] can: m_can: Remove double interrupt enable
` [PATCH v2 06/18] can: m_can: Disable unused interrupts
` [PATCH v2 07/18] can: m_can: Keep interrupts enabled during peripheral read
` [PATCH v2 08/18] can: m_can: Write transmit header and data in one transaction
` [PATCH v2 09/18] can: m_can: Implement receive coalescing
` [PATCH v2 10/18] can: m_can: Implement transmit coalescing
` [PATCH v2 11/18] can: m_can: Add rx coalescing ethtool support
` [PATCH v2 12/18] can: m_can: Add tx "
` [PATCH v2 13/18] can: m_can: Cache tx putidx
` [PATCH v2 14/18] can: m_can: Use the workqueue as queue
` [PATCH v2 15/18] can: m_can: Introduce a tx_fifo_in_flight counter
` [PATCH v2 16/18] can: m_can: Use tx_fifo_in_flight for netif_queue control
` [PATCH v2 17/18] can: m_can: Implement BQL
` [PATCH v2 18/18] can: m_can: Implement transmit submission coalescing
mcp251xfd: rx frame truncation
2023-01-25 17:06 UTC (23+ messages)
` AW: "
` WG: mcp251xfd: rx frame truncation (1/2)
` "
` AW: "
` "
` AW: "
` AW: "
` WG: mcp251xfd: rx frame truncation
mcp251xfd diagnostic outputs
2023-01-25 12:41 UTC (4+ messages)
` AW: "
[PATCH 0/5] can: mcp251xfd: workaround double-RX erratum
2023-01-25 9:21 UTC (12+ messages)
` AW: "
` AW: "
[PATCH v1 0/2] can: mcp251xfd: better workaround broken TX FIFO STA register read
2023-01-24 15:27 UTC (3+ messages)
` [PATCH v1 1/2] can: mcp251xfd: tef: prepare to workaround broken RX FIFO tail index erratum
` [PATCH v1 2/2] can: mcp251xfd: tef: use new workaround
[PATCH 0/8] can: ems_pci: Add support for CPC-PCIe v3
2023-01-20 10:10 UTC (15+ messages)
` [PATCH 1/8] can: ems_pci: Fixed code style, copyright and email address
` [PATCH 2/8] can: ems_pci: Added Asix AX99100 definitions
` [PATCH 3/8] can: ems_pci: Initialize BAR registers
` [PATCH 4/8] can: ems_pci: Added read/write register and post irq functions
` [PATCH 5/8] can: ems_pci: Initialize CAN controller base addresses
` [PATCH 6/8] can: ems_pci: Added IRQ enable
` [PATCH 7/8] can: ems_pci: Deassert hardware reset
` [PATCH 8/8] can: ems_pci: Added MODULE_AUTHOR
[PATCH 0/2] phy: Add support for NXP TJR1443 CAN Transceiver
2023-01-20 7:12 UTC (6+ messages)
` [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document NXP TJR1443
` [PATCH 2/2] phy: phy-can-transceiver: Add support for "
[PATCH v2 0/5] can: mcp251xfd: workaround broken RX FIFO STA register read
2023-01-19 11:28 UTC (6+ messages)
` [PATCH v2 1/5] can: mcp251xfd: setup timestamping before mcp251xfd_ring_init()
` [PATCH v2 2/5] can: mcp251xfd: clarify the meaning of timestamp
` [PATCH v2 3/5] can: mcp251xfd: mcp251xfd_handle_rxif_ring_uinc(): factor out in separate function
` [PATCH v2 4/5] can: mcp251xfd: rx: prepare to workaround broken RX FIFO head index erratum
` [PATCH v2 5/5] can: mcp251xfd: rx: "
[PATCH] phy: phy-can-transceiver: Skip warning if no "max-bitrate"
2023-01-18 17:28 UTC (2+ messages)
[syzbot] memory leak in j1939_session_new
2023-01-18 3:41 UTC
[PATCH v7 0/5] can: bxcan: add support for ST bxCAN controller
2023-01-16 17:51 UTC (3+ messages)
` [PATCH v7 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings
` [PATCH v7 5/5] can: bxcan: add support for ST bxCAN controller
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).