linux-can.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jimmy Assarsson <extja@kvaser.com>
To: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: linux-can@vger.kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/12] can: kvaser_usb: Fix possible completions during init_completion
Date: Sat, 28 May 2022 09:34:57 +0200	[thread overview]
Message-ID: <e2f0ef9a-642c-0f1d-e557-39ddbe8659d9@kvaser.com> (raw)
In-Reply-To: <20220516134748.3724796-4-anssi.hannula@bitwise.fi>

On 5/16/22 15:47, Anssi Hannula wrote:
> kvaser_usb uses completions to signal when a response event is received
> for outgoing commands.
> 
> However, it uses init_completion() to reinitialize the start_comp and
> stop_comp completions before sending the start/stop commands.
> 
> In case the device sends the corresponding response just before the
> actual command is sent, complete() may be called concurrently with
> init_completion() which is not safe.
> 
> This might be triggerable even with a properly functioning device by
> stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which
> also causes the driver to send CMD_STOP_CHIP when restart-ms is off),
> but that was not tested.
> 
> Fix the issue by using reinit_completion() instead.
> 
> Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>

Looks good to me.
Tested-by: Jimmy Assarsson <extja@kvaser.com>

> ---
>   drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 4 ++--
>   drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 4 ++--
>   2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
> index 4e90a4b7f95a..b0094f162964 100644
> --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
> +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
> @@ -1869,7 +1869,7 @@ static int kvaser_usb_hydra_start_chip(struct kvaser_usb_net_priv *priv)
>   {
>   	int err;
>   
> -	init_completion(&priv->start_comp);
> +	reinit_completion(&priv->start_comp);
>   
>   	err = kvaser_usb_hydra_send_simple_cmd(priv->dev, CMD_START_CHIP_REQ,
>   					       priv->channel);
> @@ -1887,7 +1887,7 @@ static int kvaser_usb_hydra_stop_chip(struct kvaser_usb_net_priv *priv)
>   {
>   	int err;
>   
> -	init_completion(&priv->stop_comp);
> +	reinit_completion(&priv->stop_comp);
>   
>   	/* Make sure we do not report invalid BUS_OFF from CMD_CHIP_STATE_EVENT
>   	 * see comment in kvaser_usb_hydra_update_state()
> diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
> index d9f40b9702a5..09ade66256b2 100644
> --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
> +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c
> @@ -1300,7 +1300,7 @@ static int kvaser_usb_leaf_start_chip(struct kvaser_usb_net_priv *priv)
>   {
>   	int err;
>   
> -	init_completion(&priv->start_comp);
> +	reinit_completion(&priv->start_comp);
>   
>   	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_START_CHIP,
>   					      priv->channel);
> @@ -1318,7 +1318,7 @@ static int kvaser_usb_leaf_stop_chip(struct kvaser_usb_net_priv *priv)
>   {
>   	int err;
>   
> -	init_completion(&priv->stop_comp);
> +	reinit_completion(&priv->stop_comp);
>   
>   	err = kvaser_usb_leaf_send_simple_cmd(priv->dev, CMD_STOP_CHIP,
>   					      priv->channel);

  reply	other threads:[~2022-05-28  7:36 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 13:47 [PATCH 00/12] can: kvaser_usb: Various fixes Anssi Hannula
2022-05-16 13:47 ` [PATCH 01/12] can: kvaser_usb_leaf: Fix overread with an invalid command Anssi Hannula
2022-05-28  7:34   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 02/12] can: kvaser_usb: Fix use of uninitialized completion Anssi Hannula
2022-05-28  7:34   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 03/12] can: kvaser_usb: Fix possible completions during init_completion Anssi Hannula
2022-05-28  7:34   ` Jimmy Assarsson [this message]
2022-05-16 13:47 ` [PATCH 04/12] can: kvaser_usb: Mark Mini PCIe 2xHS as supporting error counters Anssi Hannula
2022-05-28  7:37   ` Jimmy Assarsson
2022-05-30 10:55     ` Anssi Hannula
2022-05-16 13:47 ` [PATCH 05/12] can: kvaser_usb_leaf: Set Warning state even without bus errors Anssi Hannula
2022-05-28  7:35   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 06/12] can: kvaser_usb_leaf: Fix TX queue out of sync after restart Anssi Hannula
2022-05-28  7:35   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 07/12] can: kvaser_usb_leaf: Fix CAN state " Anssi Hannula
2022-06-06 15:31   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 08/12] can: kvaser_usb_leaf: Fix improved state not being reported Anssi Hannula
2022-06-06 15:32   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 09/12] can: kvaser_usb_leaf: Fix silently failing bus params setup Anssi Hannula
2022-05-28  7:37   ` Jimmy Assarsson
2022-05-30 10:55     ` Anssi Hannula
2022-05-16 13:47 ` [PATCH 10/12] can: kvaser_usb_leaf: Fix wrong CAN state after stopping Anssi Hannula
2022-05-28  7:35   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 11/12] can: kvaser_usb_leaf: Ignore stale bus-off after start Anssi Hannula
2022-06-06 15:32   ` Jimmy Assarsson
2022-05-16 13:47 ` [PATCH 12/12] can: kvaser_usb_leaf: Fix bogus restart events Anssi Hannula
2022-05-28  7:35   ` Jimmy Assarsson
2022-05-17  8:41 ` [PATCH 00/12] can: kvaser_usb: Various fixes Jimmy Assarsson
2022-05-28  7:42   ` Jimmy Assarsson
2022-05-30 10:56     ` Anssi Hannula
2022-06-06 15:33       ` Jimmy Assarsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e2f0ef9a-642c-0f1d-e557-39ddbe8659d9@kvaser.com \
    --to=extja@kvaser.com \
    --cc=anssi.hannula@bitwise.fi \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).