* [PATCH] clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks
@ 2018-12-18 2:12 Jeffrey Hugo
2019-01-09 18:59 ` Stephen Boyd
0 siblings, 1 reply; 2+ messages in thread
From: Jeffrey Hugo @ 2018-12-18 2:12 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, mark.rutland
Cc: bjorn.andersson, marc.w.gonzalez, linux-clk, devicetree,
linux-arm-msm, linux-kernel, Jeffrey Hugo
A branch clock is basically a clock that can be gated for power savings,
but is also what devices/drivers consume. Configuring a branch clock's
rate needs to be done at the source, so for all branch clocks which have
a defined parent, set CLK_SET_RATE_PARENT so that clk_set_rate() calls on
branch clocks can do what is expected. This is important as most drivers
do not check the resulting clock rate after a successful clk_set_rate()
call, thus the driver may get out of sync with the actual hardware state
and weird issues might crop up. This has been observed with issues
getting SDHCI to reliably support "fast" cards such as SDR104.
Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8998.c | 48 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 1b77939..b618bbf 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -1189,6 +1189,7 @@ enum {
"ufs_axi_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1206,6 +1207,7 @@ enum {
"usb30_master_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1288,6 +1290,7 @@ enum {
"blsp1_qup1_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1305,6 +1308,7 @@ enum {
"blsp1_qup1_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1322,6 +1326,7 @@ enum {
"blsp1_qup2_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1339,6 +1344,7 @@ enum {
"blsp1_qup2_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1356,6 +1362,7 @@ enum {
"blsp1_qup3_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1373,6 +1380,7 @@ enum {
"blsp1_qup3_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1390,6 +1398,7 @@ enum {
"blsp1_qup4_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1407,6 +1416,7 @@ enum {
"blsp1_qup4_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1424,6 +1434,7 @@ enum {
"blsp1_qup5_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1441,6 +1452,7 @@ enum {
"blsp1_qup5_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1458,6 +1470,7 @@ enum {
"blsp1_qup6_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1475,6 +1488,7 @@ enum {
"blsp1_qup6_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1505,6 +1519,7 @@ enum {
"blsp1_uart1_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1522,6 +1537,7 @@ enum {
"blsp1_uart2_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1539,6 +1555,7 @@ enum {
"blsp1_uart3_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1569,6 +1586,7 @@ enum {
"blsp2_qup1_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1586,6 +1604,7 @@ enum {
"blsp2_qup1_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1603,6 +1622,7 @@ enum {
"blsp2_qup2_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1620,6 +1640,7 @@ enum {
"blsp2_qup2_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1637,6 +1658,7 @@ enum {
"blsp2_qup3_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1654,6 +1676,7 @@ enum {
"blsp2_qup3_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1671,6 +1694,7 @@ enum {
"blsp2_qup4_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1688,6 +1712,7 @@ enum {
"blsp2_qup4_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1705,6 +1730,7 @@ enum {
"blsp2_qup5_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1722,6 +1748,7 @@ enum {
"blsp2_qup5_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1739,6 +1766,7 @@ enum {
"blsp2_qup6_i2c_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1756,6 +1784,7 @@ enum {
"blsp2_qup6_spi_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1786,6 +1815,7 @@ enum {
"blsp2_uart1_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1803,6 +1833,7 @@ enum {
"blsp2_uart2_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1820,6 +1851,7 @@ enum {
"blsp2_uart3_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1837,6 +1869,7 @@ enum {
"usb30_master_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1854,6 +1887,7 @@ enum {
"gp1_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1871,6 +1905,7 @@ enum {
"gp2_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1888,6 +1923,7 @@ enum {
"gp3_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1957,6 +1993,7 @@ enum {
"hmss_ahb_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -1987,6 +2024,7 @@ enum {
"hmss_rbcpr_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2088,6 +2126,7 @@ enum {
"pcie_aux_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2157,6 +2196,7 @@ enum {
"pcie_aux_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2174,6 +2214,7 @@ enum {
"pdm2_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2243,6 +2284,7 @@ enum {
"sdcc2_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2273,6 +2315,7 @@ enum {
"sdcc4_apps_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2316,6 +2359,7 @@ enum {
"tsif_ref_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2346,6 +2390,7 @@ enum {
"ufs_axi_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2441,6 +2486,7 @@ enum {
"usb30_master_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2458,6 +2504,7 @@ enum {
"usb30_mock_utmi_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
@@ -2488,6 +2535,7 @@ enum {
"usb3_phy_aux_clk_src",
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
},
},
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks
2018-12-18 2:12 [PATCH] clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks Jeffrey Hugo
@ 2019-01-09 18:59 ` Stephen Boyd
0 siblings, 0 replies; 2+ messages in thread
From: Stephen Boyd @ 2019-01-09 18:59 UTC (permalink / raw)
To: Jeffrey Hugo, mark.rutland, mturquette, robh+dt
Cc: bjorn.andersson, marc.w.gonzalez, linux-clk, devicetree,
linux-arm-msm, linux-kernel, Jeffrey Hugo
Quoting Jeffrey Hugo (2018-12-17 18:12:14)
> A branch clock is basically a clock that can be gated for power savings,
> but is also what devices/drivers consume. Configuring a branch clock's
> rate needs to be done at the source, so for all branch clocks which have
> a defined parent, set CLK_SET_RATE_PARENT so that clk_set_rate() calls on
> branch clocks can do what is expected. This is important as most drivers
> do not check the resulting clock rate after a successful clk_set_rate()
> call, thus the driver may get out of sync with the actual hardware state
> and weird issues might crop up. This has been observed with issues
> getting SDHCI to reliably support "fast" cards such as SDR104.
>
> Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
Applied to clk-next
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-09 18:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-18 2:12 [PATCH] clk: qcom: Add CLK_SET_RATE_PARENT for 8998 branch clocks Jeffrey Hugo
2019-01-09 18:59 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).