linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Liao <jamesjj.liao@mediatek.com>
To: Weiyi Lu <weiyi.lu@mediatek.com>
Cc: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Rob Herring <robh@kernel.org>, Fan Chen <fan.chen@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>, <linux-clk@vger.kernel.org>,
	<srv_heupstream@mediatek.com>, <stable@vger.kernel.org>,
	Owen Chen <owen.chen@mediatek.com>
Subject: Re: [PATCH v5 3/9] clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data
Date: Tue, 5 Mar 2019 14:46:51 +0800	[thread overview]
Message-ID: <1551768411.22671.3.camel@mtksdaap41> (raw)
In-Reply-To: <20190305050546.23431-5-weiyi.lu@mediatek.com>

On Tue, 2019-03-05 at 13:05 +0800, Weiyi Lu wrote:
> From: Owen Chen <owen.chen@mediatek.com>
> 
> 1. pcwibits: The integer bits of pcw for plls is extend to 8 bits,
>    add a variable to indicate this change and
>    backward-compatible.
> 2. fmin: The pll freqency lower-bound is vary from 1GMhz to
>    1.5Ghz, add a variable to indicate platform-dependent.
> 
> Signed-off-by: Owen Chen <owen.chen@mediatek.com>
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Acked-by: Sean Wang <sean.wang@kernel.org>

Reviewed-by: James Liao <jamesjj.liao@mediatek.com>

> ---
>  drivers/clk/mediatek/clk-mtk.h |  2 ++
>  drivers/clk/mediatek/clk-pll.c | 15 +++++++++++----
>  2 files changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index f83c2bbb677e..11b5517903d0 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -214,8 +214,10 @@ struct mtk_pll_data {
>  	unsigned int flags;
>  	const struct clk_ops *ops;
>  	u32 rst_bar_mask;
> +	unsigned long fmin;
>  	unsigned long fmax;
>  	int pcwbits;
> +	int pcwibits;
>  	uint32_t pcw_reg;
>  	int pcw_shift;
>  	const struct mtk_pll_div_table *div_table;
> diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
> index 18842d660317..67aaa3082d9b 100644
> --- a/drivers/clk/mediatek/clk-pll.c
> +++ b/drivers/clk/mediatek/clk-pll.c
> @@ -32,6 +32,8 @@
>  #define AUDPLL_TUNER_EN		BIT(31)
>  
>  #define POSTDIV_MASK		0x7
> +
> +/* default 7 bits integer, can be overridden with pcwibits. */
>  #define INTEGER_BITS		7
>  
>  /*
> @@ -68,12 +70,15 @@ static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin,
>  		u32 pcw, int postdiv)
>  {
>  	int pcwbits = pll->data->pcwbits;
> -	int pcwfbits;
> +	int pcwfbits = 0;
> +	int ibits;
>  	u64 vco;
>  	u8 c = 0;
>  
>  	/* The fractional part of the PLL divider. */
> -	pcwfbits = pcwbits > INTEGER_BITS ? pcwbits - INTEGER_BITS : 0;
> +	ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +	if (pcwbits > ibits)
> +		pcwfbits = pcwbits - ibits;
>  
>  	vco = (u64)fin * pcw;
>  
> @@ -170,9 +175,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
>  static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>  		u32 freq, u32 fin)
>  {
> -	unsigned long fmin = 1000 * MHZ;
> +	unsigned long fmin = pll->data->fmin ? pll->data->fmin : (1000 * MHZ);
>  	const struct mtk_pll_div_table *div_table = pll->data->div_table;
>  	u64 _pcw;
> +	int ibits;
>  	u32 val;
>  
>  	if (freq > pll->data->fmax)
> @@ -196,7 +202,8 @@ static void mtk_pll_calc_values(struct mtk_clk_pll *pll, u32 *pcw, u32 *postdiv,
>  	}
>  
>  	/* _pcw = freq * postdiv / fin * 2^pcwfbits */
> -	_pcw = ((u64)freq << val) << (pll->data->pcwbits - INTEGER_BITS);
> +	ibits = pll->data->pcwibits ? pll->data->pcwibits : INTEGER_BITS;
> +	_pcw = ((u64)freq << val) << (pll->data->pcwbits - ibits);
>  	do_div(_pcw, fin);
>  
>  	*pcw = (u32)_pcw;



  reply	other threads:[~2019-03-05  6:47 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-05  5:05 [PATCH v5 0/9] Mediatek MT8183 clock support Weiyi Lu
2019-03-05  5:05 ` Weiyi Lu
2019-03-05 18:41   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 1/9] clk: mediatek: Disable tuner_en before change PLL rate Weiyi Lu
2019-03-05  6:42   ` James Liao
2019-03-07 16:09   ` Matthias Brugger
2019-04-11 20:16   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 2/9] clk: mediatek: Add new clkmux register API Weiyi Lu
2019-03-05  6:43   ` James Liao
2019-03-08  6:17   ` Nicolas Boichat
2019-03-14 23:21   ` Nicolas Boichat
2019-04-11 20:12     ` Stephen Boyd
2019-04-11 20:16   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 3/9] clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data Weiyi Lu
2019-03-05  6:46   ` James Liao [this message]
2019-03-08  6:20   ` Nicolas Boichat
2019-04-11 20:14     ` Stephen Boyd
2019-04-11 20:16   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 4/9] dt-bindings: ARM: Mediatek: Document bindings for MT8183 Weiyi Lu
2019-03-05  5:05 ` [PATCH v5 5/9] clk: mediatek: Add dt-bindings for MT8183 clocks Weiyi Lu
2019-04-11 20:16   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 6/9] clk: mediatek: Add flags support for mtk_gate data Weiyi Lu
2019-03-05  6:47   ` James Liao
2019-03-08  6:20   ` Nicolas Boichat
2019-04-11 20:19   ` Stephen Boyd
2019-04-12  2:42     ` Weiyi Lu
2019-03-05  5:05 ` [PATCH v5 7/9] clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data Weiyi Lu
2019-03-05  6:47   ` James Liao
2019-03-08  6:23   ` Nicolas Boichat
2019-04-11 20:21   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 8/9] clk: mediatek: Add MT8183 clock support Weiyi Lu
2019-03-08  6:42   ` Nicolas Boichat
2019-03-08 14:46     ` Nicolas Boichat
2019-04-11 20:24       ` Stephen Boyd
2019-04-11 20:24   ` Stephen Boyd
2019-03-05  5:05 ` [PATCH v5 9/9] clk: mediatek: Allow changing PLL rate when it is off Weiyi Lu
2019-03-05  6:48   ` James Liao
2019-04-11 20:24   ` Stephen Boyd
2019-03-28  5:18 ` [PATCH v5 0/9] Mediatek MT8183 clock support Weiyi Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1551768411.22671.3.camel@mtksdaap41 \
    --to=jamesjj.liao@mediatek.com \
    --cc=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=owen.chen@mediatek.com \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=stable@vger.kernel.org \
    --cc=weiyi.lu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).