Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To: gokulsri@codeaurora.org, sboyd@kernel.org, agross@kernel.org,
	bjorn.andersson@linaro.org, david.brown@linaro.org,
	devicetree@vger.kernel.org, jassisinghbrar@gmail.com,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	mark.rutland@arm.com, mturquette@baylibre.com, ohad@wizery.com,
	robh+dt@kernel.org, sricharan@codeaurora.org,
	nprakash@codeaurora.org
Subject: [PATCH V2 12/12] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC
Date: Fri, 13 Sep 2019 17:26:11 +0530
Message-ID: <1568375771-22933-13-git-send-email-gokulsri@codeaurora.org> (raw)
In-Reply-To: <1568375771-22933-1-git-send-email-gokulsri@codeaurora.org>

Enable remoteproc WCSS PIL driver with glink
and ssr subdevices. Also configures shared memory
and enables smp2p and mailboxes required for IPC.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nikhil Prakash V <nprakash@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 126 ++++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 6a61a63..0ea026e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -10,12 +10,66 @@
 	model = "Qualcomm Technologies, Inc. IPQ8074";
 	compatible = "qcom,ipq8074";
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_region: memory@4ab00000 {
+			no-map;
+			reg = <0x0 0x4ab00000 0x0 0x00100000>;
+		};
+
+		q6_region: memory@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x05f00000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq8074", "qcom,scm";
 		};
 	};
 
+	tcsr_mutex: hwlock@193d000 {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x80>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 0>;
+	};
+
+	wcss: smp2p-wcss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <0 322 1>;
+
+		qcom,ipc = <&apcs 8 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			qcom,smp2p-feature-ssr-ack;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
@@ -431,6 +485,78 @@
 				      "axi_m_sticky";
 			status = "disabled";
 		};
+
+		apcs: syscon@b111000 {
+			compatible = "syscon";
+			reg = <0x0b111000 0x1000>;
+		};
+
+		tcsr_q6: syscon@1945000 {
+			compatible = "syscon";
+			reg = <0x01945000 0xe000>;
+		};
+
+		tcsr_mutex_regs: syscon@193d000 {
+			compatible = "syscon";
+			reg = <0x01905000 0x8000>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq8074-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		q6v5_wcss: q6v5_wcss@cd00000 {
+			compatible = "qcom,ipq8074-wcss-pil";
+			reg = <0x0cd00000 0x4040>,
+			      <0x004ab000 0x20>;
+			reg-names = "qdsp6",
+				    "rmb";
+			qca,auto-restart;
+			qca,extended-intc;
+			interrupts-extended = <&intc 0 325 1>,
+					      <&wcss_smp2p_in 0 0>,
+					      <&wcss_smp2p_in 1 0>,
+					      <&wcss_smp2p_in 2 0>,
+					      <&wcss_smp2p_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			resets = <&gcc GCC_WCSSAON_RESET>,
+				 <&gcc GCC_WCSS_BCR>,
+				 <&gcc GCC_WCSS_Q6_BCR>;
+
+			reset-names = "wcss_aon_reset",
+				      "wcss_reset",
+				      "wcss_q6_reset";
+
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "prng";
+
+			qcom,halt-regs = <&tcsr_q6 0xa000 0xd000 0x0>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+
+				rpm_requests {
+					qcom,glink-channels = "IPCRTR";
+				};
+			};
+		};
 	};
 
 	cpus {
-- 
1.9.1


  parent reply index

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-13 11:55 [PATCH V2 00/12] remoteproc: qcom: q6v5-wcss: Add support for secure pil Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 01/12] remoteproc: qcom: Add PRNG proxy clock Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 02/12] remoteproc: qcom: Add secure PIL support Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 03/12] remoteproc: qcom: Add support for split q6 + m3 wlan firmware Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 04/12] remoteproc: qcom: Add ssr subdevice identifier Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 05/12] remoteproc: qcom: Update regmap offsets for halt register Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 06/12] dt-bindings: clock: qcom: Add reset for WCSSAON Gokul Sriram Palanisamy
2019-09-13 21:48   ` Rob Herring
2019-09-16 11:49     ` gokulsri
2019-09-17 16:16   ` Stephen Boyd
2019-09-13 11:56 ` [PATCH V2 07/12] clk: qcom: Add WCSSAON reset Gokul Sriram Palanisamy
2019-09-17 16:16   ` Stephen Boyd
2019-09-13 11:56 ` [PATCH V2 08/12] dt-bindings: mailbox: qom: Add ipq8074 APPS compatible Gokul Sriram Palanisamy
2019-09-13 21:48   ` Rob Herring
2019-09-16 11:52     ` gokulsri
2019-09-13 11:56 ` [PATCH V2 09/12] mailbox: qcom: Add support for IPQ8074 APCS Gokul Sriram Palanisamy
2019-09-13 11:56 ` [PATCH V2 10/12] dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC Gokul Sriram Palanisamy
2019-09-13 21:48   ` Rob Herring
2019-09-17  7:07     ` gokulsri
2019-09-13 11:56 ` [PATCH V2 11/12] arm64: dts: Add support for scm on IPQ8074 SoCs Gokul Sriram Palanisamy
2019-09-13 11:56 ` Gokul Sriram Palanisamy [this message]
2019-09-17 16:15   ` [PATCH V2 12/12] arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC Stephen Boyd

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1568375771-22933-13-git-send-email-gokulsri@codeaurora.org \
    --to=gokulsri@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nprakash@codeaurora.org \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org linux-clk@archiver.kernel.org
	public-inbox-index linux-clk


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/ public-inbox