From: Paul Cercueil <paul@crapouillou.net>
To: Zhou Yanjie <zhouyanjie@zoho.com>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
mturquette@baylibre.com, paul.burton@mips.com, sboyd@kernel.org,
robh+dt@kernel.org, syq@debian.org, mark.rutland@arm.com
Subject: Re: [PATCH 1/2 v3] dt-bindings: clock: Add X1000 bindings.
Date: Mon, 11 Nov 2019 02:13:52 +0100 [thread overview]
Message-ID: <1573434832.3.1@crapouillou.net> (raw)
In-Reply-To: <1573378102-72380-2-git-send-email-zhouyanjie@zoho.com>
Hi Zhou,
Le dim., nov. 10, 2019 at 17:28, Zhou Yanjie <zhouyanjie@zoho.com> a
écrit :
> Add the clock bindings for the X1000 Soc from Ingenic.
>
> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
> ---
> .../devicetree/bindings/clock/ingenic,cgu.txt | 1 +
> include/dt-bindings/clock/x1000-cgu.h | 44
> ++++++++++++++++++++++
> 2 files changed, 45 insertions(+)
> create mode 100644 include/dt-bindings/clock/x1000-cgu.h
When you send a revised version of a patchset, it's common practice to
have a per-patch changelog right here. Then a cover letter is only
really needed for big patchsets that need extra information.
>
> diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
> b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
> index ba5a442..75598e6 100644
> --- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
> +++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
> @@ -11,6 +11,7 @@ Required properties:
> * ingenic,jz4725b-cgu
> * ingenic,jz4770-cgu
> * ingenic,jz4780-cgu
> + * ingenic,x1000-cgu
> - reg : The address & length of the CGU registers.
> - clocks : List of phandle & clock specifiers for clocks external to
> the CGU.
> Two such external clocks should be specified - first the external
> crystal
> diff --git a/include/dt-bindings/clock/x1000-cgu.h
> b/include/dt-bindings/clock/x1000-cgu.h
> new file mode 100644
> index 00000000..bbaebaf
> --- /dev/null
> +++ b/include/dt-bindings/clock/x1000-cgu.h
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header provides clock numbers for the ingenic,x1000-cgu DT
> binding.
> + *
> + * They are roughly ordered as:
> + * - external clocks
> + * - PLLs
> + * - muxes/dividers in the order they appear in the x1000
> programmers manual
> + * - gates in order of their bit in the CLKGR* registers
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_X1000_CGU_H__
> +#define __DT_BINDINGS_CLOCK_X1000_CGU_H__
> +
> +#define X1000_CLK_EXCLK 0
> +#define X1000_CLK_RTCLK 1
> +#define X1000_CLK_APLL 2
> +#define X1000_CLK_MPLL 3
> +#define X1000_CLK_SCLKA 4
> +#define X1000_CLK_CPUMUX 5
> +#define X1000_CLK_CPU 6
> +#define X1000_CLK_L2CACHE 7
> +#define X1000_CLK_AHB0 8
> +#define X1000_CLK_AHB2PMUX 9
> +#define X1000_CLK_AHB2 10
> +#define X1000_CLK_PCLK 11
> +#define X1000_CLK_DDR 12
> +#define X1000_CLK_MAC 13
> +#define X1000_CLK_MSCMUX 14
> +#define X1000_CLK_MSC0 15
> +#define X1000_CLK_MSC1 16
> +#define X1000_CLK_SSIPLL 17
> +#define X1000_CLK_SSIMUX 18
> +#define X1000_CLK_SFC 19
> +#define X1000_CLK_I2C0 20
> +#define X1000_CLK_I2C1 21
> +#define X1000_CLK_I2C2 22
> +#define X1000_CLK_UART0 23
> +#define X1000_CLK_UART1 24
> +#define X1000_CLK_UART2 25
> +#define X1000_CLK_SSI 26
> +#define X1000_CLK_PDMA 27
> +
> +#endif /* __DT_BINDINGS_CLOCK_X1000_CGU_H__ */
> --
> 2.7.4
>
>
next prev parent reply other threads:[~2019-11-11 1:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 17:50 clk: X1000: Add support for the X1000 Zhou Yanjie
2019-10-18 17:50 ` [PATCH 1/2] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-10-18 17:50 ` [PATCH 2/2] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-10-21 12:31 ` Paul Cercueil
2019-10-22 15:34 ` Zhou Yanjie
2019-10-22 16:56 ` clk: X1000: Add support for the X1000 v2 Zhou Yanjie
2019-10-22 16:56 ` [PATCH 1/2 v2] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-10-25 21:49 ` Rob Herring
2019-10-22 16:56 ` [PATCH 2/2 v2] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-11-02 21:27 ` Paul Cercueil
2019-11-10 9:28 ` clk: X1000: Add support for the X1000 v3 Zhou Yanjie
2019-11-10 9:28 ` [PATCH 1/2 v3] dt-bindings: clock: Add X1000 bindings Zhou Yanjie
2019-11-11 1:13 ` Paul Cercueil [this message]
2019-11-14 13:25 ` Zhou Yanjie
2019-11-12 0:55 ` Rob Herring
2019-11-13 23:59 ` Stephen Boyd
2019-11-14 13:37 ` Zhou Yanjie
2019-11-14 13:29 ` Zhou Yanjie
2019-11-14 0:00 ` Stephen Boyd
2019-11-10 9:28 ` [PATCH 2/2 v3] clk: Ingenic: Add CGU driver for X1000 Zhou Yanjie
2019-11-11 1:16 ` Paul Cercueil
2019-11-14 0:00 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573434832.3.1@crapouillou.net \
--to=paul@crapouillou.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=paul.burton@mips.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=syq@debian.org \
--cc=zhouyanjie@zoho.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).