Linux-Clk Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema
@ 2020-01-14  1:26 Anson Huang
  2020-01-14  1:26 ` [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Anson Huang @ 2020-01-14  1:26 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Linux-imx

Convert the i.MX8MQ clock binding to DT schema format using json-schema

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
	- Correct the compatible string, should be "fsl,imx8mq-ccm";
---
 .../devicetree/bindings/clock/imx8mq-clock.txt     | 20 ------
 .../devicetree/bindings/clock/imx8mq-clock.yaml    | 72 ++++++++++++++++++++++
 2 files changed, 72 insertions(+), 20 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
deleted file mode 100644
index 52de826..0000000
--- a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Clock bindings for NXP i.MX8M Quad
-
-Required properties:
-- compatible: Should be "fsl,imx8mq-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "ckil"
-    - "osc_25m"
-    - "osc_27m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx8mq-clock.h
-for the full list of i.MX8M Quad clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
new file mode 100644
index 0000000..77790f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/imx8mq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Quad Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Quad clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: fsl,imx8mq-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 25m osc
+      - description: 27m osc
+      - description: ext1 clock input
+      - description: ext2 clock input
+      - description: ext3 clock input
+      - description: ext4 clock input
+
+  clock-names:
+    items:
+      - const: ckil
+      - const: osc_25m
+      - const: osc_27m
+      - const: clk_ext1
+      - const: clk_ext2
+      - const: clk_ext3
+      - const: clk_ext4
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h
+      for the full list of i.MX8M Quad clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    clk: clock-controller@30380000 {
+        compatible = "fsl,imx8mq-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+                 <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "ckil", "osc_25m", "osc_27m",
+                      "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+...
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM to json-schema
  2020-01-14  1:26 [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Anson Huang
@ 2020-01-14  1:26 ` " Anson Huang
  2020-01-21 22:01   ` Rob Herring
  2020-01-14  1:26 ` [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding Anson Huang
  2020-01-21 22:00 ` [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Rob Herring
  2 siblings, 1 reply; 6+ messages in thread
From: Anson Huang @ 2020-01-14  1:26 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Linux-imx

Convert the i.MX8MM clock binding to DT schema format using json-schema

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 .../devicetree/bindings/clock/imx8mm-clock.txt     | 29 ---------
 .../devicetree/bindings/clock/imx8mm-clock.yaml    | 68 ++++++++++++++++++++++
 2 files changed, 68 insertions(+), 29 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.txt
 create mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt b/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
deleted file mode 100644
index 8e4ab9e..0000000
--- a/Documentation/devicetree/bindings/clock/imx8mm-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Clock bindings for NXP i.MX8M Mini
-
-Required properties:
-- compatible: Should be "fsl,imx8mm-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-          entry in clock-names
-- clock-names: should include the following entries:
-    - "osc_32k"
-    - "osc_24m"
-    - "clk_ext1"
-    - "clk_ext2"
-    - "clk_ext3"
-    - "clk_ext4"
-
-clk: clock-controller@30380000 {
-	compatible = "fsl,imx8mm-ccm";
-	reg = <0x0 0x30380000 0x0 0x10000>;
-	#clock-cells = <1>;
-	clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
-		 <&clk_ext3>, <&clk_ext4>;
-	clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
-		      "clk_ext3", "clk_ext4";
-};
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
-for the full list of i.MX8M Mini clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
new file mode 100644
index 0000000..f5be181
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/imx8mm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Mini Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description: |
+  NXP i.MX8M Mini clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: fsl,imx8mm-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+      - description: ext2 clock input
+      - description: ext3 clock input
+      - description: ext4 clock input
+
+  clock-names:
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+      - const: clk_ext2
+      - const: clk_ext3
+      - const: clk_ext4
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h
+      for the full list of i.MX8M Mini clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    clk: clock-controller@30380000 {
+        compatible = "fsl,imx8mm-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+                 <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+                      "clk_ext3", "clk_ext4";
+    };
+
+...
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding
  2020-01-14  1:26 [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Anson Huang
  2020-01-14  1:26 ` [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
@ 2020-01-14  1:26 ` Anson Huang
  2020-01-21 22:01   ` Rob Herring
  2020-01-21 22:00 ` [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Rob Herring
  2 siblings, 1 reply; 6+ messages in thread
From: Anson Huang @ 2020-01-14  1:26 UTC (permalink / raw)
  To: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel
  Cc: Linux-imx

Refine i.MX8MN clock binding by removing useless content and
updating the example, it makes all i.MX8M SoCs' clock binding
aligned.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 .../devicetree/bindings/clock/imx8mn-clock.yaml    | 48 +---------------------
 1 file changed, 2 insertions(+), 46 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index 622f365..da2103d 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
@@ -40,7 +40,7 @@ properties:
 
   '#clock-cells':
     const: 1
-    description: |
+    description:
       The clock consumer should specify the desired clock by having the clock
       ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
       for the full list of i.MX8M Nano clock IDs.
@@ -57,7 +57,7 @@ examples:
   - |
     clk: clock-controller@30380000 {
         compatible = "fsl,imx8mn-ccm";
-        reg = <0x0 0x30380000 0x0 0x10000>;
+        reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
         clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
                  <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
@@ -65,48 +65,4 @@ examples:
                       "clk_ext2", "clk_ext3", "clk_ext4";
     };
 
-  # Required external clocks for Clock Control Module node:
-  - |
-    osc_32k: clock-osc-32k {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <32768>;
-        clock-output-names = "osc_32k";
-    };
-
-    osc_24m: clock-osc-24m {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <24000000>;
-        clock-output-names = "osc_24m";
-    };
-
-    clk_ext1: clock-ext1 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext1";
-    };
-
-    clk_ext2: clock-ext2 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext2";
-    };
-
-    clk_ext3: clock-ext3 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <133000000>;
-        clock-output-names = "clk_ext3";
-    };
-
-    clk_ext4: clock-ext4 {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency= <133000000>;
-        clock-output-names = "clk_ext4";
-    };
-
 ...
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema
  2020-01-14  1:26 [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Anson Huang
  2020-01-14  1:26 ` [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
  2020-01-14  1:26 ` [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding Anson Huang
@ 2020-01-21 22:00 ` Rob Herring
  2 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-01-21 22:00 UTC (permalink / raw)
  To: Anson Huang
  Cc: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel, Linux-imx

On Tue, 14 Jan 2020 09:26:05 +0800, Anson Huang wrote:
> Convert the i.MX8MQ clock binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> 	- Correct the compatible string, should be "fsl,imx8mq-ccm";
> ---
>  .../devicetree/bindings/clock/imx8mq-clock.txt     | 20 ------
>  .../devicetree/bindings/clock/imx8mq-clock.yaml    | 72 ++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 20 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM to json-schema
  2020-01-14  1:26 ` [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
@ 2020-01-21 22:01   ` Rob Herring
  0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-01-21 22:01 UTC (permalink / raw)
  To: Anson Huang
  Cc: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel, Linux-imx

On Tue, 14 Jan 2020 09:26:06 +0800, Anson Huang wrote:
> Convert the i.MX8MM clock binding to DT schema format using json-schema
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change.
> ---
>  .../devicetree/bindings/clock/imx8mm-clock.txt     | 29 ---------
>  .../devicetree/bindings/clock/imx8mm-clock.yaml    | 68 ++++++++++++++++++++++
>  2 files changed, 68 insertions(+), 29 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8mm-clock.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding
  2020-01-14  1:26 ` [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding Anson Huang
@ 2020-01-21 22:01   ` Rob Herring
  0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2020-01-21 22:01 UTC (permalink / raw)
  To: Anson Huang
  Cc: mturquette, sboyd, robh+dt, mark.rutland, shawnguo, s.hauer,
	kernel, festevam, linux-clk, devicetree, linux-arm-kernel,
	linux-kernel, Linux-imx

On Tue, 14 Jan 2020 09:26:07 +0800, Anson Huang wrote:
> Refine i.MX8MN clock binding by removing useless content and
> updating the example, it makes all i.MX8M SoCs' clock binding
> aligned.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change.
> ---
>  .../devicetree/bindings/clock/imx8mn-clock.yaml    | 48 +---------------------
>  1 file changed, 2 insertions(+), 46 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-14  1:26 [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Anson Huang
2020-01-14  1:26 ` [PATCH V2 2/3] dt-bindings: clock: Convert i.MX8MM " Anson Huang
2020-01-21 22:01   ` Rob Herring
2020-01-14  1:26 ` [PATCH V2 3/3] dt-bindings: clock: Refine i.MX8MN clock binding Anson Huang
2020-01-21 22:01   ` Rob Herring
2020-01-21 22:00 ` [PATCH V2 1/3] dt-bindings: clock: Convert i.MX8MQ to json-schema Rob Herring

Linux-Clk Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-clk/0 linux-clk/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-clk linux-clk/ https://lore.kernel.org/linux-clk \
		linux-clk@vger.kernel.org
	public-inbox-index linux-clk

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-clk


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git