linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: mturquette@baylibre.com, sboyd@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, aisheng.dong@nxp.com, arnd@arndb.de,
	peng.fan@nxp.com, abel.vesa@nxp.com, fugang.duan@nxp.com,
	daniel.baluta@nxp.com, yuehaibing@huawei.com,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V8 0/6] Support building i.MX ARMv8 platforms clock driver as module
Date: Thu, 30 Jul 2020 07:58:34 +0800	[thread overview]
Message-ID: <1596067120-1193-1-git-send-email-Anson.Huang@nxp.com> (raw)

Nowdays, there are more and more requirements of building SoC specific drivers as
modules, such as Android GKI (generic kernel image), this patch set supports building
i.MX ARMv8 SoCs clock drivers as modules,

The CLK_IMXxxx is introduced for i.MX ARMv7 platforms in order to make the build
options aligned, the reason why i.MX ARMv7 platforms clock driver do NOT support
module build and COMPILE_TEST is because, some drivers like i.MX GPT timer driver
depends on clock driver to be ready before it, GPT driver uses TIMER_OF_DECLARE(),
while i.MX6/7 clock drivers use CLK_OF_DECLARE(), and GPT driver is critical for
i.MX6/7 platforms kernel boot up, so GPT driver needs to be changed to support
loadable clock driver first, then the i.MX6/7 clock drivers can support loadable
module, this will be done later.

Changes since V7:
	- remove unnecessary inlude of linux/bitfield in patch #1.

Anson Huang (6):
  clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31
    bits
  clk: composite: Export clk_hw_register_composite()
  clk: imx: Support building i.MX common clock driver as module
  clk: imx: Add clock configuration for ARMv7 platforms
  clk: imx8m: Support module build
  clk: imx8qxp: Support building i.MX8QXP clock driver as module

 drivers/clk/clk-composite.c        |  1 +
 drivers/clk/imx/Kconfig            | 94 ++++++++++++++++++++++++++++++++------
 drivers/clk/imx/Makefile           | 79 ++++++++++++++++----------------
 drivers/clk/imx/clk-composite-8m.c |  2 +
 drivers/clk/imx/clk-cpu.c          |  2 +
 drivers/clk/imx/clk-frac-pll.c     |  2 +
 drivers/clk/imx/clk-gate2.c        |  2 +
 drivers/clk/imx/clk-imx6sl.c       | 14 +++---
 drivers/clk/imx/clk-imx8mm.c       |  4 ++
 drivers/clk/imx/clk-imx8mn.c       |  4 ++
 drivers/clk/imx/clk-imx8mp.c       |  4 ++
 drivers/clk/imx/clk-imx8mq.c       |  4 ++
 drivers/clk/imx/clk-imx8qxp-lpcg.c |  4 ++
 drivers/clk/imx/clk-imx8qxp.c      |  4 ++
 drivers/clk/imx/clk-pll14xx.c      |  5 ++
 drivers/clk/imx/clk-sscg-pll.c     |  2 +
 drivers/clk/imx/clk.c              | 17 +++++--
 drivers/clk/imx/clk.h              |  6 +++
 18 files changed, 185 insertions(+), 65 deletions(-)

-- 
2.7.4


             reply	other threads:[~2020-07-30  0:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 23:58 Anson Huang [this message]
2020-07-29 23:58 ` [PATCH V8 1/6] clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits Anson Huang
2020-07-30  7:22   ` Arnd Bergmann
2020-07-29 23:58 ` [PATCH V8 2/6] clk: composite: Export clk_hw_register_composite() Anson Huang
2020-07-29 23:58 ` [PATCH V8 3/6] clk: imx: Support building i.MX common clock driver as module Anson Huang
2020-07-29 23:58 ` [PATCH V8 4/6] clk: imx: Add clock configuration for ARMv7 platforms Anson Huang
2020-07-29 23:58 ` [PATCH V8 5/6] clk: imx8m: Support module build Anson Huang
2020-07-29 23:58 ` [PATCH V8 6/6] clk: imx8qxp: Support building i.MX8QXP clock driver as module Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1596067120-1193-1-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=abel.vesa@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=arnd@arndb.de \
    --cc=daniel.baluta@nxp.com \
    --cc=festevam@gmail.com \
    --cc=fugang.duan@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=peng.fan@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=yuehaibing@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).