[PATCH AUTOSEL 4.9 042/107] clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks

[PATCH AUTOSEL 4.9 042/107] clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 6e6da2039c82271dd873b9ad2b902a692a7dd554 ]

All the audio interfaces on Allwinner SoCs need to change their module
clocks during operation, to switch between support for 44.1 kHz and 48
kHz family sample rates. The clock rate for the module clocks is
governed by their upstream audio PLL. The module clocks themselves only
have a gate, and sometimes a divider or mux. Thus any rate changes need
to be propagated upstream.

Set the CLK_SET_RATE_PARENT flag for all audio module clocks to achieve
this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index e1dc4e5b34e1..82add4670c53 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -362,10 +362,10 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
 static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
 					    "pll-audio-2x", "pll-audio" };
 static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
-			       0x0b0, 16, 2, BIT(31), 0);
+			       0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
-			       0x0b4, 16, 2, BIT(31), 0);
+			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
 
 /* TODO: the parent for most of the USB clocks is not known */
 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
@@ -442,7 +442,7 @@ static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
 static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
 		      0x140, BIT(31), 0);
 static SUNXI_CCU_GATE(ac_dig_4x_clk,	"ac-dig-4x",	"pll-audio-4x",
-		      0x140, BIT(30), 0);
+		      0x140, BIT(30), CLK_SET_RATE_PARENT);
 static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
 		      0x144, BIT(31), 0);
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 051/107] clk: imx6sl: ensure MMDC CH0 handshake is bypassed

[Sasha Levin]

From: Anson Huang <anson.huang@nxp.com>

[ Upstream commit 0efcc2c0fd2001a83240a8c3d71f67770484917e ]

Same as other i.MX6 SoCs, ensure unused MMDC channel's
handshake is bypassed, this is to make sure no request
signal will be generated when periphe_clk_sel is changed
or SRC warm reset is triggered.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx6sl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 5fd4ddac1bf1..f3d9dc2d2405 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -17,6 +17,8 @@
 
 #include "clk.h"
 
+#define CCDR				0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK	(1 << 17)
 #define CCSR			0xc
 #define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
 #define CACRR			0x10
@@ -414,6 +416,10 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",       "usdhc3_podf",       base + 0x80, 6);
 	clks[IMX6SL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",       "usdhc4_podf",       base + 0x80, 8);
 
+	/* Ensure the MMDC CH0 handshake is bypassed */
+	writel_relaxed(readl_relaxed(base + CCDR) |
+		BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
 	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
-- 
2.19.1