* [PATCH] clk: tidy up the help tags in Kconfig
@ 2019-08-16 18:57 Lubomir Rintel
2019-08-16 19:27 ` Stephen Boyd
0 siblings, 1 reply; 4+ messages in thread
From: Lubomir Rintel @ 2019-08-16 18:57 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette; +Cc: linux-clk, linux-kernel, Lubomir Rintel
Sometimes an extraneous "---help---" follows "help". That is probably a
copy&paste error stemming from their inconsistent use. Let's just replace
them all with "help", removing the extra ones along the way.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/clk/Kconfig | 51 +++++++++++++++++++--------------------------
1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 801fa1cd03217..0acc1a8590897 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -13,7 +13,7 @@ config COMMON_CLK
select CLKDEV_LOOKUP
select SRCU
select RATIONAL
- ---help---
+ help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
@@ -26,7 +26,7 @@ menu "Common Clock Framework"
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
- ---help---
+ help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
@@ -35,14 +35,14 @@ source "drivers/clk/versatile/Kconfig"
config CLK_HSDK
bool "PLL Driver for HSDK platform"
depends on OF || COMPILE_TEST
- ---help---
+ help
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
control.
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
- ---help---
+ help
This driver supports Maxim 77620/77686/77802 crystal oscillator
clock.
@@ -55,7 +55,7 @@ config COMMON_CLK_MAX9485
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
depends on MFD_RK808
- ---help---
+ help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
Clkout1 is always on, Clkout2 can off by control register.
@@ -65,7 +65,7 @@ config COMMON_CLK_HI655X
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
depends on REGMAP
default MFD_HI655X_PMIC
- ---help---
+ help
This driver supports the hi655x PMIC clock. This
multi-function device has one fixed-rate oscillator, clocked
at 32KHz.
@@ -73,7 +73,7 @@ config COMMON_CLK_HI655X
config COMMON_CLK_SCMI
tristate "Clock driver controlled via SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
- ---help---
+ help
This driver provides support for clocks that are controlled
by firmware that implements the SCMI interface.
@@ -83,7 +83,7 @@ config COMMON_CLK_SCMI
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
- ---help---
+ help
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
@@ -106,7 +106,7 @@ config COMMON_CLK_SI5351
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
@@ -116,7 +116,6 @@ config COMMON_CLK_SI514
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the Silicon Labs 514 programmable clock
generator.
@@ -125,7 +124,6 @@ config COMMON_CLK_SI544
depends on I2C
select REGMAP_I2C
help
- ---help---
This driver supports the Silicon Labs 544 programmable clock
generator.
@@ -135,7 +133,6 @@ config COMMON_CLK_SI570
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
@@ -144,7 +141,7 @@ config COMMON_CLK_CDCE706
depends on I2C
select REGMAP_I2C
select RATIONAL
- ---help---
+ help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_CDCE925
@@ -153,7 +150,6 @@ config COMMON_CLK_CDCE925
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the TI CDCE913/925/937/949 programmable clock
synthesizer. Each chip has different number of PLLs and outputs.
For example, the CDCE925 contains two PLLs with spread-spectrum
@@ -176,7 +172,7 @@ config COMMON_CLK_GEMINI
depends on ARCH_GEMINI || COMPILE_TEST
select MFD_SYSCON
select RESET_CONTROLLER
- ---help---
+ help
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
@@ -186,7 +182,7 @@ config COMMON_CLK_ASPEED
default ARCH_ASPEED
select MFD_SYSCON
select RESET_CONTROLLER
- ---help---
+ help
This driver supports the SoC clocks on the Aspeed BMC platforms.
The G4 and G5 series, including the ast2400 and ast2500, are supported
@@ -195,7 +191,7 @@ config COMMON_CLK_ASPEED
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
- ---help---
+ help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
@@ -203,7 +199,7 @@ config COMMON_CLK_S2MPS11
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
- ---help---
+ help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
@@ -212,14 +208,13 @@ config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
help
- ---help---
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
- ---help---
+ help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
@@ -227,7 +222,7 @@ config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default ARCH_XGENE
depends on ARM64 || COMPILE_TEST
- ---help---
+ help
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_LOCHNAGAR
@@ -241,26 +236,26 @@ config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
select MFD_SYSCON if ARCH_LPC18XX
- ---help---
+ help
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
- ---help---
+ help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
- ---help---
+ help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
- ---help---
+ help
Support for the Marvell PXA SoC.
config COMMON_CLK_PIC32
@@ -270,7 +265,7 @@ config COMMON_CLK_OXNAS
bool "Clock driver for the OXNAS SoC Family"
depends on ARCH_OXNAS || COMPILE_TEST
select MFD_SYSCON
- ---help---
+ help
Support for the OXNAS SoC Family clocks.
config COMMON_CLK_VC5
@@ -279,26 +274,22 @@ config COMMON_CLK_VC5
depends on OF
select REGMAP_I2C
help
- ---help---
This driver supports the IDT VersaClock 5 and VersaClock 6
programmable clock generators.
config COMMON_CLK_STM32MP157
def_bool COMMON_CLK && MACH_STM32MP157
help
- ---help---
Support for stm32mp157 SoC family clocks
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
- ---help---
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
def_bool COMMON_CLK && MACH_STM32H743
help
- ---help---
Support for stm32h7 SoC family clocks
config COMMON_CLK_BD718XX
--
2.21.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: tidy up the help tags in Kconfig
2019-08-16 18:57 [PATCH] clk: tidy up the help tags in Kconfig Lubomir Rintel
@ 2019-08-16 19:27 ` Stephen Boyd
2019-08-22 9:36 ` Lubomir Rintel
0 siblings, 1 reply; 4+ messages in thread
From: Stephen Boyd @ 2019-08-16 19:27 UTC (permalink / raw)
To: Lubomir Rintel, Michael Turquette; +Cc: linux-clk, linux-kernel, Lubomir Rintel
Quoting Lubomir Rintel (2019-08-16 11:57:16)
> Sometimes an extraneous "---help---" follows "help". That is probably a
> copy&paste error stemming from their inconsistent use. Let's just replace
> them all with "help", removing the extra ones along the way.
Can you just send the patch to remove the extra ones? I don't really
care to make it consistent in the same patch.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: tidy up the help tags in Kconfig
2019-08-16 19:27 ` Stephen Boyd
@ 2019-08-22 9:36 ` Lubomir Rintel
2019-08-22 22:36 ` Stephen Boyd
0 siblings, 1 reply; 4+ messages in thread
From: Lubomir Rintel @ 2019-08-22 9:36 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette; +Cc: linux-clk, linux-kernel
On Fri, 2019-08-16 at 12:27 -0700, Stephen Boyd wrote:
> Quoting Lubomir Rintel (2019-08-16 11:57:16)
> > Sometimes an extraneous "---help---" follows "help". That is probably a
> > copy&paste error stemming from their inconsistent use. Let's just replace
> > them all with "help", removing the extra ones along the way.
>
> Can you just send the patch to remove the extra ones? I don't really
> care to make it consistent in the same patch.
Sure. Just done so.
Do you also care about making it consistent, or is it okay to just
leave it as it is?
Thanks
Lubo
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] clk: tidy up the help tags in Kconfig
2019-08-22 9:36 ` Lubomir Rintel
@ 2019-08-22 22:36 ` Stephen Boyd
0 siblings, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2019-08-22 22:36 UTC (permalink / raw)
To: Lubomir Rintel, Michael Turquette; +Cc: linux-clk, linux-kernel
Quoting Lubomir Rintel (2019-08-22 02:36:02)
> On Fri, 2019-08-16 at 12:27 -0700, Stephen Boyd wrote:
> > Quoting Lubomir Rintel (2019-08-16 11:57:16)
> > > Sometimes an extraneous "---help---" follows "help". That is probably a
> > > copy&paste error stemming from their inconsistent use. Let's just replace
> > > them all with "help", removing the extra ones along the way.
> >
> > Can you just send the patch to remove the extra ones? I don't really
> > care to make it consistent in the same patch.
>
> Sure. Just done so.
>
> Do you also care about making it consistent, or is it okay to just
> leave it as it is?
>
>
I don't think it matters. We just need to not duplicate it. Maybe we
could add some check to Kconfig to detect duplicate help sections too.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-08-22 22:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-16 18:57 [PATCH] clk: tidy up the help tags in Kconfig Lubomir Rintel
2019-08-16 19:27 ` Stephen Boyd
2019-08-22 9:36 ` Lubomir Rintel
2019-08-22 22:36 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).