linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: kholk11@gmail.com
To: linux-arm-msm@vger.kernel.org
Cc: kholk11@gmail.com, marijns95@gmail.com, agross@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	mark.rutland@arm.com, bjorn.andersson@linaro.org,
	linus.walleij@linaro.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org
Subject: [PATCH 1/5] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956
Date: Sat, 21 Sep 2019 12:12:03 +0200	[thread overview]
Message-ID: <20190921101207.65042-2-kholk11@gmail.com> (raw)
In-Reply-To: <20190921101207.65042-1-kholk11@gmail.com>

From: "Angelo G. Del Regno" <kholk11@gmail.com>

Add the pinctrl driver to support pin configuration with the
pinctrl framework on MSM8976, MSM8956, APQ8056, APQ8076.

Signed-off-by: Angelo G. Del Regno <kholk11@gmail.com>
---
 .../bindings/pinctrl/qcom,msm8976-pinctrl.txt |  183 +++
 drivers/pinctrl/qcom/Kconfig                  |   10 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-msm8976.c        | 1128 +++++++++++++++++
 4 files changed, 1322 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
 create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8976.c

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
new file mode 100644
index 000000000000..4e944f84b7d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt
@@ -0,0 +1,183 @@
+Qualcomm MSM8976 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8956 and MSM8976 platforms.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,msm8976-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+- gpio-ranges:
+	Usage: required
+	Definition:  see ../gpio/gpio.txt
+
+- gpio-reserved-ranges:
+	Usage: optional
+	Definition: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.
+
+		    Valid pins are:
+		      gpio0-gpio145
+		        Supports mux, bias and drive-strength
+
+		      sdc1_clk, sdc1_cmd, sdc1_data,
+		      sdc2_clk, sdc2_cmd, sdc2_data,
+		      sdc3_clk, sdc3_cmd, sdc3_data
+		        Supports bias and drive-strength
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+
+		    gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
+		    blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
+		    qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
+		    blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
+		    qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
+		    qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
+		    blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
+		    sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
+		    blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
+		    uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
+		    uim1_present, uim2_data, uim2_clk, uim2_reset,
+		    uim2_present, ts_xvdd, mipi_dsi0, us_euro, ts_resout,
+		    ts_sample, sec_mi2s_mclk_b, pri_mi2s, codec_reset,
+		    cdc_pdm0, us_emitter, pri_mi2s_mclk_b, pri_mi2s_mclk_c,
+		    lpass_slimbus, lpass_slimbus0, lpass_slimbus1, codec_int1,
+		    codec_int2, wcss_bt, sdc3, wcss_wlan2, wcss_wlan1,
+		    wcss_wlan0, wcss_wlan, wcss_fm, key_volp, key_snapshot,
+		    key_focus, key_home, pwr_down, dmic0_clk, hdmi_int,
+		    dmic0_data, wsa_vi, wsa_en, blsp_spi8, wsa_irq, blsp_i2c8,
+		    pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx,
+		    sdcard_det, sec_mi2s, ss_switch,
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@1000000 {
+		compatible = "qcom,msm8976-pinctrl";
+		reg = <0x1000000 0x300000>;
+		interrupts = <0 208 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&tlmm 0 0 145>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		blsp1_uart2_active: blsp1_uart2_active {
+			mux {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "blsp_uart2";
+			};
+
+			config {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 8e14a5f2e970..1c2c1ac0bfd2 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -90,6 +90,16 @@ config PINCTRL_MSM8916
 	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
 	  Qualcomm TLMM block found on the Qualcomm 8916 platform.
 
+config PINCTRL_MSM8976
+	tristate "Qualcomm 8976 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm TLMM block found on the Qualcomm MSM8976 platform.
+	  The Qualcomm MSM8956, APQ8056, APQ8076 platforms are also
+	  supported by this driver.
+
 config PINCTRL_MSM8994
 	tristate "Qualcomm 8994 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index ebe906872272..a720b76c2d12 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
 obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
 obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
 obj-$(CONFIG_PINCTRL_MSM8916)	+= pinctrl-msm8916.o
+obj-$(CONFIG_PINCTRL_MSM8976)	+= pinctrl-msm8976.o
 obj-$(CONFIG_PINCTRL_MSM8994)   += pinctrl-msm8994.o
 obj-$(CONFIG_PINCTRL_MSM8996)   += pinctrl-msm8996.o
 obj-$(CONFIG_PINCTRL_MSM8998)   += pinctrl-msm8998.o
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8976.c b/drivers/pinctrl/qcom/pinctrl-msm8976.c
new file mode 100644
index 000000000000..6b0969a3033f
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-msm8976.c
@@ -0,0 +1,1128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * Copyright (c) 2016, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_BASE 0x0
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_BASE + REG_SIZE * id,			\
+		.io_reg = REG_BASE + 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = REG_BASE + 0xc + REG_SIZE * id,	\
+		.intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 4,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+static const struct pinctrl_pin_desc msm8976_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "GPIO_136"),
+	PINCTRL_PIN(137, "GPIO_137"),
+	PINCTRL_PIN(138, "GPIO_138"),
+	PINCTRL_PIN(139, "GPIO_139"),
+	PINCTRL_PIN(140, "GPIO_140"),
+	PINCTRL_PIN(141, "GPIO_141"),
+	PINCTRL_PIN(142, "GPIO_142"),
+	PINCTRL_PIN(143, "GPIO_143"),
+	PINCTRL_PIN(144, "GPIO_144"),
+	PINCTRL_PIN(145, "SDC1_CLK"),
+	PINCTRL_PIN(146, "SDC1_CMD"),
+	PINCTRL_PIN(147, "SDC1_DATA"),
+	PINCTRL_PIN(148, "SDC1_RCLK"),
+	PINCTRL_PIN(149, "SDC2_CLK"),
+	PINCTRL_PIN(150, "SDC2_CMD"),
+	PINCTRL_PIN(151, "SDC2_DATA"),
+	PINCTRL_PIN(152, "QDSD_CLK"),
+	PINCTRL_PIN(153, "QDSD_CMD"),
+	PINCTRL_PIN(154, "QDSD_DATA0"),
+	PINCTRL_PIN(155, "QDSD_DATA1"),
+	PINCTRL_PIN(156, "QDSD_DATA2"),
+	PINCTRL_PIN(157, "QDSD_DATA3"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+
+static const unsigned int sdc1_clk_pins[] = { 145 };
+static const unsigned int sdc1_cmd_pins[] = { 146 };
+static const unsigned int sdc1_data_pins[] = { 147 };
+static const unsigned int sdc1_rclk_pins[] = { 148 };
+static const unsigned int sdc2_clk_pins[] = { 149 };
+static const unsigned int sdc2_cmd_pins[] = { 150 };
+static const unsigned int sdc2_data_pins[] = { 151 };
+static const unsigned int qdsd_clk_pins[] = { 152 };
+static const unsigned int qdsd_cmd_pins[] = { 153 };
+static const unsigned int qdsd_data0_pins[] = { 154 };
+static const unsigned int qdsd_data1_pins[] = { 155 };
+static const unsigned int qdsd_data2_pins[] = { 156 };
+static const unsigned int qdsd_data3_pins[] = { 157 };
+
+enum msm8976_functions {
+	msm_mux_gpio,
+	msm_mux_blsp_uart1,
+	msm_mux_blsp_spi1,
+	msm_mux_smb_int,
+	msm_mux_blsp_i2c1,
+	msm_mux_blsp_spi2,
+	msm_mux_blsp_uart2,
+	msm_mux_blsp_i2c2,
+	msm_mux_gcc_gp1_clk_b,
+	msm_mux_blsp_spi3,
+	msm_mux_qdss_tracedata_b,
+	msm_mux_blsp_i2c3,
+	msm_mux_gcc_gp2_clk_b,
+	msm_mux_gcc_gp3_clk_b,
+	msm_mux_blsp_spi4,
+	msm_mux_cap_int,
+	msm_mux_blsp_i2c4,
+	msm_mux_blsp_spi5,
+	msm_mux_blsp_uart5,
+	msm_mux_qdss_traceclk_a,
+	msm_mux_m_voc,
+	msm_mux_blsp_i2c5,
+	msm_mux_qdss_tracectl_a,
+	msm_mux_qdss_tracedata_a,
+	msm_mux_blsp_spi6,
+	msm_mux_blsp_uart6,
+	msm_mux_qdss_tracectl_b,
+	msm_mux_blsp_i2c6,
+	msm_mux_qdss_traceclk_b,
+	msm_mux_mdp_vsync,
+	msm_mux_pri_mi2s_mclk_a,
+	msm_mux_sec_mi2s_mclk_a,
+	msm_mux_cam_mclk,
+	msm_mux_cci0_i2c,
+	msm_mux_cci1_i2c,
+	msm_mux_blsp1_spi,
+	msm_mux_blsp3_spi,
+	msm_mux_gcc_gp1_clk_a,
+	msm_mux_gcc_gp2_clk_a,
+	msm_mux_gcc_gp3_clk_a,
+	msm_mux_uim_batt,
+	msm_mux_sd_write,
+	msm_mux_uim1_data,
+	msm_mux_uim1_clk,
+	msm_mux_uim1_reset,
+	msm_mux_uim1_present,
+	msm_mux_uim2_data,
+	msm_mux_uim2_clk,
+	msm_mux_uim2_reset,
+	msm_mux_uim2_present,
+	msm_mux_ts_xvdd,
+	msm_mux_mipi_dsi0,
+	msm_mux_us_euro,
+	msm_mux_ts_resout,
+	msm_mux_ts_sample,
+	msm_mux_sec_mi2s_mclk_b,
+	msm_mux_pri_mi2s,
+	msm_mux_codec_reset,
+	msm_mux_cdc_pdm0,
+	msm_mux_us_emitter,
+	msm_mux_pri_mi2s_mclk_b,
+	msm_mux_pri_mi2s_mclk_c,
+	msm_mux_lpass_slimbus,
+	msm_mux_lpass_slimbus0,
+	msm_mux_lpass_slimbus1,
+	msm_mux_codec_int1,
+	msm_mux_codec_int2,
+	msm_mux_wcss_bt,
+	msm_mux_sdc3,
+	msm_mux_wcss_wlan2,
+	msm_mux_wcss_wlan1,
+	msm_mux_wcss_wlan0,
+	msm_mux_wcss_wlan,
+	msm_mux_wcss_fm,
+	msm_mux_key_volp,
+	msm_mux_key_snapshot,
+	msm_mux_key_focus,
+	msm_mux_key_home,
+	msm_mux_pwr_down,
+	msm_mux_dmic0_clk,
+	msm_mux_hdmi_int,
+	msm_mux_dmic0_data,
+	msm_mux_wsa_vi,
+	msm_mux_wsa_en,
+	msm_mux_blsp_spi8,
+	msm_mux_wsa_irq,
+	msm_mux_blsp_i2c8,
+	msm_mux_pa_indicator,
+	msm_mux_modem_tsync,
+	msm_mux_ssbi_wtr1,
+	msm_mux_gsm1_tx,
+	msm_mux_gsm0_tx,
+	msm_mux_sdcard_det,
+	msm_mux_sec_mi2s,
+	msm_mux_ss_switch,
+	msm_mux_NA,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+	"gpio141", "gpio142", "gpio143", "gpio144",
+};
+static const char * const blsp_uart1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const blsp_spi1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const smb_int_groups[] = {
+	"gpio1",
+};
+static const char * const blsp_i2c1_groups[] = {
+	"gpio2", "gpio3",
+};
+static const char * const blsp_spi2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7",
+};
+static const char * const blsp_uart2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7",
+};
+static const char * const blsp_i2c2_groups[] = {
+	"gpio6", "gpio7",
+};
+static const char * const gcc_gp1_clk_b_groups[] = {
+	"gpio105",
+};
+static const char * const blsp_spi3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11",
+};
+static const char * const qdss_tracedata_b_groups[] = {
+	"gpio26", "gpio27", "gpio28", "gpio29", "gpio30",
+	"gpio31", "gpio33", "gpio34", "gpio35", "gpio36", "gpio37", "gpio38",
+	"gpio116", "gpio126", "gpio128", "gpio129",
+};
+static const char * const blsp_i2c3_groups[] = {
+	"gpio10", "gpio11",
+};
+static const char * const gcc_gp2_clk_b_groups[] = {
+	"gpio12",
+};
+static const char * const gcc_gp3_clk_b_groups[] = {
+	"gpio13",
+};
+static const char * const blsp_spi4_groups[] = {
+	"gpio12", "gpio13", "gpio14", "gpio15",
+};
+static const char * const cap_int_groups[] = {
+	"gpio13",
+};
+static const char * const blsp_i2c4_groups[] = {
+	"gpio14", "gpio15",
+};
+static const char * const blsp_spi5_groups[] = {
+	"gpio134", "gpio135", "gpio136", "gpio137",
+};
+static const char * const blsp_uart5_groups[] = {
+	"gpio134", "gpio135", "gpio136", "gpio137",
+};
+static const char * const qdss_traceclk_a_groups[] = {
+	"gpio46",
+};
+const char * const m_voc_groups[] = {
+	"gpio123", "gpio124",
+};
+static const char * const blsp_i2c5_groups[] = {
+	"gpio136", "gpio137",
+};
+static const char * const qdss_tracectl_a_groups[] = {
+	"gpio45",
+};
+static const char * const qdss_tracedata_a_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio47", "gpio48", "gpio62", "gpio69", "gpio120",
+	"gpio121", "gpio130", "gpio131",
+};
+static const char * const blsp_spi6_groups[] = {
+	"gpio20", "gpio21", "gpio22", "gpio23",
+};
+static const char * const blsp_uart6_groups[] = {
+	"gpio20", "gpio21", "gpio22", "gpio23",
+};
+static const char * const qdss_tracectl_b_groups[] = {
+	"gpio5",
+};
+static const char * const blsp_i2c6_groups[] = {
+	"gpio22", "gpio23",
+};
+static const char * const qdss_traceclk_b_groups[] = {
+	"gpio5",
+};
+static const char * const mdp_vsync_groups[] = {
+	"gpio24", "gpio25",
+};
+static const char * const pri_mi2s_mclk_a_groups[] = {
+	"gpio126",
+};
+static const char * const sec_mi2s_mclk_a_groups[] = {
+	"gpio62",
+};
+static const char * const cam_mclk_groups[] = {
+	"gpio26", "gpio27", "gpio28",
+};
+static const char * const cci0_i2c_groups[] = {
+	"gpio30", "gpio29",
+};
+static const char * const cci1_i2c_groups[] = {
+	"gpio104", "gpio103",
+};
+static const char * const blsp1_spi_groups[] = {
+	"gpio101",
+};
+static const char * const blsp3_spi_groups[] = {
+	"gpio106", "gpio107",
+};
+static const char * const gcc_gp1_clk_a_groups[] = {
+	"gpio49",
+};
+static const char * const gcc_gp2_clk_a_groups[] = {
+	"gpio50",
+};
+static const char * const gcc_gp3_clk_a_groups[] = {
+	"gpio51",
+};
+static const char * const uim_batt_groups[] = {
+	"gpio61",
+};
+static const char * const sd_write_groups[] = {
+	"gpio50",
+};
+static const char * const uim2_data_groups[] = {
+	"gpio51",
+};
+static const char * const uim2_clk_groups[] = {
+	"gpio52",
+};
+static const char * const uim2_reset_groups[] = {
+	"gpio53",
+};
+static const char * const uim2_present_groups[] = {
+	"gpio54",
+};
+static const char * const uim1_data_groups[] = {
+	"gpio55",
+};
+static const char * const uim1_clk_groups[] = {
+	"gpio56",
+};
+static const char * const uim1_reset_groups[] = {
+	"gpio57",
+};
+static const char * const uim1_present_groups[] = {
+	"gpio58",
+};
+static const char * const ts_xvdd_groups[] = {
+	"gpio60",
+};
+static const char * const mipi_dsi0_groups[] = {
+	"gpio61",
+};
+static const char * const us_euro_groups[] = {
+	"gpio63",
+};
+static const char * const ts_resout_groups[] = {
+	"gpio64",
+};
+static const char * const ts_sample_groups[] = {
+	"gpio65",
+};
+static const char * const sec_mi2s_mclk_b_groups[] = {
+	"gpio66",
+};
+static const char * const pri_mi2s_groups[] = {
+	"gpio122", "gpio123", "gpio124", "gpio125", "gpio127",
+};
+static const char * const codec_reset_groups[] = {
+	"gpio67",
+};
+static const char * const cdc_pdm0_groups[] = {
+	"gpio116", "gpio117", "gpio118", "gpio119", "gpio120", "gpio121",
+};
+static const char * const us_emitter_groups[] = {
+	"gpio68",
+};
+static const char * const pri_mi2s_mclk_b_groups[] = {
+	"gpio62",
+};
+static const char * const pri_mi2s_mclk_c_groups[] = {
+	"gpio116",
+};
+static const char * const lpass_slimbus_groups[] = {
+	"gpio117",
+};
+static const char * const lpass_slimbus0_groups[] = {
+	"gpio118",
+};
+static const char * const lpass_slimbus1_groups[] = {
+	"gpio119",
+};
+static const char * const codec_int1_groups[] = {
+	"gpio73",
+};
+static const char * const codec_int2_groups[] = {
+	"gpio74",
+};
+static const char * const wcss_bt_groups[] = {
+	"gpio39", "gpio47", "gpio88",
+};
+static const char * const sdc3_groups[] = {
+	"gpio39", "gpio40", "gpio41",
+	"gpio42", "gpio43", "gpio44",
+};
+static const char * const wcss_wlan2_groups[] = {
+	"gpio40",
+};
+static const char * const wcss_wlan1_groups[] = {
+	"gpio41",
+};
+static const char * const wcss_wlan0_groups[] = {
+	"gpio42",
+};
+static const char * const wcss_wlan_groups[] = {
+	"gpio43", "gpio44",
+};
+static const char * const wcss_fm_groups[] = {
+	"gpio45", "gpio46",
+};
+static const char * const key_volp_groups[] = {
+	"gpio85",
+};
+static const char * const key_snapshot_groups[] = {
+	"gpio86",
+};
+static const char * const key_focus_groups[] = {
+	"gpio87",
+};
+static const char * const key_home_groups[] = {
+	"gpio88",
+};
+static const char * const pwr_down_groups[] = {
+	"gpio89",
+};
+static const char * const dmic0_clk_groups[] = {
+	"gpio66",
+};
+static const char * const hdmi_int_groups[] = {
+	"gpio90",
+};
+static const char * const dmic0_data_groups[] = {
+	"gpio67",
+};
+static const char * const wsa_vi_groups[] = {
+	"gpio108", "gpio109",
+};
+static const char * const wsa_en_groups[] = {
+	"gpio96",
+};
+static const char * const blsp_spi8_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19",
+};
+static const char * const wsa_irq_groups[] = {
+	"gpio97",
+};
+static const char * const blsp_i2c8_groups[] = {
+	"gpio18", "gpio19",
+};
+static const char * const pa_indicator_groups[] = {
+	"gpio92",
+};
+static const char * const modem_tsync_groups[] = {
+	"gpio93",
+};
+static const char * const nav_tsync_groups[] = {
+	"gpio93",
+};
+static const char * const ssbi_wtr1_groups[] = {
+	"gpio79", "gpio94",
+};
+static const char * const gsm1_tx_groups[] = {
+	"gpio95",
+};
+static const char * const gsm0_tx_groups[] = {
+	"gpio99",
+};
+static const char * const sdcard_det_groups[] = {
+	"gpio133",
+};
+static const char * const sec_mi2s_groups[] = {
+	"gpio102", "gpio105", "gpio134", "gpio135",
+};
+
+static const char * const ss_switch_groups[] = {
+	"gpio139",
+};
+
+static const struct msm_function msm8976_functions[] = {
+	FUNCTION(gpio),
+	FUNCTION(blsp_spi1),
+	FUNCTION(smb_int),
+	FUNCTION(blsp_i2c1),
+	FUNCTION(blsp_spi2),
+	FUNCTION(blsp_uart1),
+	FUNCTION(blsp_uart2),
+	FUNCTION(blsp_i2c2),
+	FUNCTION(gcc_gp1_clk_b),
+	FUNCTION(blsp_spi3),
+	FUNCTION(qdss_tracedata_b),
+	FUNCTION(blsp_i2c3),
+	FUNCTION(gcc_gp2_clk_b),
+	FUNCTION(gcc_gp3_clk_b),
+	FUNCTION(blsp_spi4),
+	FUNCTION(cap_int),
+	FUNCTION(blsp_i2c4),
+	FUNCTION(blsp_spi5),
+	FUNCTION(blsp_uart5),
+	FUNCTION(qdss_traceclk_a),
+	FUNCTION(m_voc),
+	FUNCTION(blsp_i2c5),
+	FUNCTION(qdss_tracectl_a),
+	FUNCTION(qdss_tracedata_a),
+	FUNCTION(blsp_spi6),
+	FUNCTION(blsp_uart6),
+	FUNCTION(qdss_tracectl_b),
+	FUNCTION(blsp_i2c6),
+	FUNCTION(qdss_traceclk_b),
+	FUNCTION(mdp_vsync),
+	FUNCTION(pri_mi2s_mclk_a),
+	FUNCTION(sec_mi2s_mclk_a),
+	FUNCTION(cam_mclk),
+	FUNCTION(cci0_i2c),
+	FUNCTION(cci1_i2c),
+	FUNCTION(blsp1_spi),
+	FUNCTION(blsp3_spi),
+	FUNCTION(gcc_gp1_clk_a),
+	FUNCTION(gcc_gp2_clk_a),
+	FUNCTION(gcc_gp3_clk_a),
+	FUNCTION(uim_batt),
+	FUNCTION(sd_write),
+	FUNCTION(uim1_data),
+	FUNCTION(uim1_clk),
+	FUNCTION(uim1_reset),
+	FUNCTION(uim1_present),
+	FUNCTION(uim2_data),
+	FUNCTION(uim2_clk),
+	FUNCTION(uim2_reset),
+	FUNCTION(uim2_present),
+	FUNCTION(ts_xvdd),
+	FUNCTION(mipi_dsi0),
+	FUNCTION(us_euro),
+	FUNCTION(ts_resout),
+	FUNCTION(ts_sample),
+	FUNCTION(sec_mi2s_mclk_b),
+	FUNCTION(pri_mi2s),
+	FUNCTION(codec_reset),
+	FUNCTION(cdc_pdm0),
+	FUNCTION(us_emitter),
+	FUNCTION(pri_mi2s_mclk_b),
+	FUNCTION(pri_mi2s_mclk_c),
+	FUNCTION(lpass_slimbus),
+	FUNCTION(lpass_slimbus0),
+	FUNCTION(lpass_slimbus1),
+	FUNCTION(codec_int1),
+	FUNCTION(codec_int2),
+	FUNCTION(wcss_bt),
+	FUNCTION(sdc3),
+	FUNCTION(wcss_wlan2),
+	FUNCTION(wcss_wlan1),
+	FUNCTION(wcss_wlan0),
+	FUNCTION(wcss_wlan),
+	FUNCTION(wcss_fm),
+	FUNCTION(key_volp),
+	FUNCTION(key_snapshot),
+	FUNCTION(key_focus),
+	FUNCTION(key_home),
+	FUNCTION(pwr_down),
+	FUNCTION(dmic0_clk),
+	FUNCTION(hdmi_int),
+	FUNCTION(dmic0_data),
+	FUNCTION(wsa_vi),
+	FUNCTION(wsa_en),
+	FUNCTION(blsp_spi8),
+	FUNCTION(wsa_irq),
+	FUNCTION(blsp_i2c8),
+	FUNCTION(pa_indicator),
+	FUNCTION(modem_tsync),
+	FUNCTION(ssbi_wtr1),
+	FUNCTION(gsm1_tx),
+	FUNCTION(gsm0_tx),
+	FUNCTION(sdcard_det),
+	FUNCTION(sec_mi2s),
+	FUNCTION(ss_switch),
+};
+
+static const struct msm_pingroup msm8976_groups[] = {
+	PINGROUP(0, blsp_spi1, blsp_uart1, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(1, blsp_spi1, blsp_uart1, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(2, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA),
+	PINGROUP(3, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA, NA, NA),
+	PINGROUP(4, blsp_spi2, blsp_uart2, NA, NA, NA, qdss_tracectl_b, NA, NA, NA),
+	PINGROUP(5, blsp_spi2, blsp_uart2, NA, NA, NA, qdss_traceclk_b, NA, NA, NA),
+	PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA),
+	PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA, NA, NA),
+	PINGROUP(8, blsp_spi3, NA, NA, NA, NA, qdss_tracedata_a, NA, NA, NA),
+	PINGROUP(9, blsp_spi3, NA, NA, NA, qdss_tracedata_a, NA, NA, NA, NA),
+	PINGROUP(10, blsp_spi3, NA, blsp_i2c3, NA, NA, qdss_tracedata_a, NA, NA, NA),
+	PINGROUP(11, blsp_spi3, NA, blsp_i2c3, NA, NA, NA, NA, NA, NA),
+	PINGROUP(12, blsp_spi4, NA, gcc_gp2_clk_b, NA, NA, NA, NA, NA, NA),
+	PINGROUP(13, blsp_spi4, NA, gcc_gp3_clk_b, NA, NA, NA, NA, NA, NA),
+	PINGROUP(14, blsp_spi4, NA, blsp_i2c4, NA, NA, NA, NA, NA, NA),
+	PINGROUP(15, blsp_spi4, NA, blsp_i2c4, NA, NA, NA, NA, NA, NA),
+	PINGROUP(16, blsp_spi8, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(17, blsp_spi8, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(18, blsp_spi8, NA, blsp_i2c8, NA, NA, NA, NA, NA, NA),
+	PINGROUP(19, blsp_spi8, NA, blsp_i2c8, NA, NA, NA, NA, NA, NA),
+	PINGROUP(20, blsp_spi6, blsp_uart6, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(21, blsp_spi6, blsp_uart6, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(22, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA, NA, NA),
+	PINGROUP(23, blsp_spi6, blsp_uart6, blsp_i2c6, NA, NA, NA, NA, NA, NA),
+	PINGROUP(24, mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(25, mdp_vsync, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(26, cam_mclk, NA, NA, NA, NA, qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(27, cam_mclk, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA),
+	PINGROUP(28, cam_mclk, NA, NA, NA, NA, qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(29, cci0_i2c, NA, NA, NA, NA, qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(30, cci0_i2c, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA),
+	PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA),
+	PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(33, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA),
+	PINGROUP(34, NA, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
+	PINGROUP(35, NA, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
+	PINGROUP(36, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA),
+	PINGROUP(37, NA, NA, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
+	PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA),
+	PINGROUP(39, wcss_bt, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(40, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(41, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(42, wcss_wlan, sdc3, NA, qdss_tracedata_a, NA, NA, NA, NA, NA),
+	PINGROUP(43, wcss_wlan, sdc3, NA, NA, qdss_tracedata_a, NA, NA, NA, NA),
+	PINGROUP(44, wcss_wlan, sdc3, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(45, wcss_fm, NA, qdss_tracectl_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(46, wcss_fm, NA, NA, qdss_traceclk_a, NA, NA, NA, NA, NA),
+	PINGROUP(47, wcss_bt, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(48, wcss_bt, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(49, NA, NA, gcc_gp1_clk_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(50, NA, sd_write, gcc_gp2_clk_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(51, uim2_data, gcc_gp3_clk_a, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(52, uim2_clk, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(53, uim2_reset, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(54, uim2_present, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(55, uim1_data, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(56, uim1_clk, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(57, uim1_reset, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(58, uim1_present, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(59, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(60, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(61, uim_batt, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(62, sec_mi2s_mclk_a, pri_mi2s_mclk_b, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+	PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(66, dmic0_clk, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(67, dmic0_data, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(69, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(73, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(74, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(79, NA, ssbi_wtr1, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(82, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(83, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(84, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(85, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(86, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(88, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(89, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(90, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(91, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(92, NA, NA, pa_indicator, NA, NA, NA, NA, NA, NA),
+	PINGROUP(93, NA, modem_tsync, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(94, NA, ssbi_wtr1, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(95, NA, gsm1_tx, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(99, gsm0_tx, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(100, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(101, blsp1_spi, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(102, sec_mi2s, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(103, cci1_i2c, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(104, cci1_i2c, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(105, sec_mi2s, gcc_gp1_clk_b, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(106, blsp3_spi, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(107, blsp3_spi, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(108, wsa_vi, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(109, wsa_vi, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(110, NA, NA, NA, NA,  NA, NA, NA, NA, NA),
+	PINGROUP(111, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(112, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(113, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(114, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(115, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(116, pri_mi2s_mclk_c, cdc_pdm0, NA, NA, NA, qdss_tracedata_b, NA, NA, NA),
+	PINGROUP(117, lpass_slimbus, cdc_pdm0, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(118, lpass_slimbus0, cdc_pdm0, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(119, lpass_slimbus1, cdc_pdm0, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(120, cdc_pdm0, NA, NA, NA, NA, NA, NA, qdss_tracedata_a, NA),
+	PINGROUP(121, cdc_pdm0, NA, NA, NA, NA, NA, NA, qdss_tracedata_a, NA),
+	PINGROUP(122, pri_mi2s, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(123, pri_mi2s, m_voc, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(124, pri_mi2s, m_voc, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(125, pri_mi2s, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(126, pri_mi2s_mclk_a, sec_mi2s_mclk_b, NA, NA, NA, NA, NA, NA, qdss_tracedata_b),
+	PINGROUP(127, pri_mi2s, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(128, NA, NA, NA, NA, NA, NA, qdss_tracedata_b, NA, NA),
+	PINGROUP(129, qdss_tracedata_b, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(130, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(131, qdss_tracedata_a, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(132, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(133, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(134, blsp_spi5, blsp_uart5, sec_mi2s, NA, NA, NA, NA, NA, NA),
+	PINGROUP(135, blsp_spi5, blsp_uart5, sec_mi2s, NA, NA, NA, NA, NA, NA),
+	PINGROUP(136, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA, NA, NA),
+	PINGROUP(137, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA, NA, NA),
+	PINGROUP(138, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(139, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(140, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(141, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(142, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(143, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(144, NA, NA, NA, NA, NA, NA, NA, NA, NA),
+	SDC_QDSD_PINGROUP(sdc1_clk, 0x10a000, 13, 6),
+	SDC_QDSD_PINGROUP(sdc1_cmd, 0x10a000, 11, 3),
+	SDC_QDSD_PINGROUP(sdc1_data, 0x10a000, 9, 0),
+	SDC_QDSD_PINGROUP(sdc1_rclk, 0x10a000, 15, 0),
+	SDC_QDSD_PINGROUP(sdc2_clk, 0x109000, 14, 6),
+	SDC_QDSD_PINGROUP(sdc2_cmd, 0x109000, 11, 3),
+	SDC_QDSD_PINGROUP(sdc2_data, 0x109000, 9, 0),
+	SDC_QDSD_PINGROUP(qdsd_clk, 0x19c000, 3, 0),
+	SDC_QDSD_PINGROUP(qdsd_cmd, 0x19c000, 8, 5),
+	SDC_QDSD_PINGROUP(qdsd_data0, 0x19c000, 13, 10),
+	SDC_QDSD_PINGROUP(qdsd_data1, 0x19c000, 18, 15),
+	SDC_QDSD_PINGROUP(qdsd_data2, 0x19c000, 23, 20),
+	SDC_QDSD_PINGROUP(qdsd_data3, 0x19c000, 28, 25),
+};
+
+static const struct msm_pinctrl_soc_data msm8976_pinctrl = {
+	.pins = msm8976_pins,
+	.npins = ARRAY_SIZE(msm8976_pins),
+	.functions = msm8976_functions,
+	.nfunctions = ARRAY_SIZE(msm8976_functions),
+	.groups = msm8976_groups,
+	.ngroups = ARRAY_SIZE(msm8976_groups),
+	.ngpios = 145,
+};
+
+static int msm8976_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &msm8976_pinctrl);
+}
+
+static const struct of_device_id msm8976_pinctrl_of_match[] = {
+	{ .compatible = "qcom,msm8976-pinctrl", },
+	{ },
+};
+
+static struct platform_driver msm8976_pinctrl_driver = {
+	.driver = {
+		.name = "msm8976-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = msm8976_pinctrl_of_match,
+	},
+	.probe = msm8976_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init msm8976_pinctrl_init(void)
+{
+	return platform_driver_register(&msm8976_pinctrl_driver);
+}
+arch_initcall(msm8976_pinctrl_init);
+
+static void __exit msm8976_pinctrl_exit(void)
+{
+	platform_driver_unregister(&msm8976_pinctrl_driver);
+}
+module_exit(msm8976_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm msm8976 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, msm8976_pinctrl_of_match);
-- 
2.21.0


  reply	other threads:[~2019-09-21 10:12 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-21 10:12 [PATCH 0/5] Add core MSM8956/76 SoC support drivers kholk11
2019-09-21 10:12 ` kholk11 [this message]
2019-10-04 21:16   ` [PATCH 1/5] pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956 Linus Walleij
2019-10-05  3:59   ` Bjorn Andersson
2019-10-05  9:19     ` AngeloGioacchino Del Regno
2019-09-21 10:12 ` [PATCH 3/5] soc: qcom: smd-rpm: Add MSM8976 compatible kholk11
2019-10-05  4:23   ` Bjorn Andersson
2019-09-21 10:12 ` [PATCH 4/5] dt-bindings: power: Add missing rpmpd smd performance level kholk11
2019-10-05  4:27   ` Bjorn Andersson
2019-09-21 10:12 ` [PATCH 5/5] soc: qcom: rpmpd: Add rpm power domains for msm8956 kholk11
2019-10-05  4:25   ` Bjorn Andersson
2019-10-05  9:23     ` AngeloGioacchino Del Regno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190921101207.65042-2-kholk11@gmail.com \
    --to=kholk11@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=marijns95@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).