[PATCH v2 08/11] clk: scmi: Match scmi device by both name and protocol id

* [PATCH v2 08/11] clk: scmi: Match scmi device by both name and protocol id
       [not found] <20191218111742.29731-1-sudeep.holla@arm.com>
@ 2019-12-18 11:17 ` Sudeep Holla
  2019-12-26 22:04   ` Stephen Boyd
  0 siblings, 1 reply; 2+ messages in thread
From: Sudeep Holla @ 2019-12-18 11:17 UTC (permalink / raw)
  To: linux-arm-kernel, linux-kernel
  Cc: Sudeep Holla, Cristian Marussi, Michael Turquette, Stephen Boyd,
	linux-clk

The scmi bus now has support to match the driver with devices not only
based on their protocol id but also based on their device name if one is
available. This was added to cater the need to support multiple devices
and drivers for the same protocol.

Let us add the name "clocks" to scmi_device_id table in the driver so
that in matches only with device with the same name and protocol id
SCMI_PROTOCOL_CLOCK.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/clk/clk-scmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
index 886f7c5df51a..c491f5de0f3f 100644
--- a/drivers/clk/clk-scmi.c
+++ b/drivers/clk/clk-scmi.c
@@ -176,7 +176,7 @@ static int scmi_clocks_probe(struct scmi_device *sdev)
 }
 
 static const struct scmi_device_id scmi_id_table[] = {
-	{ SCMI_PROTOCOL_CLOCK },
+	{ SCMI_PROTOCOL_CLOCK, "clocks" },
 	{ },
 };
 MODULE_DEVICE_TABLE(scmi, scmi_id_table);
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread