* [PATCH 0/3] arm64: allwinner: a64: Enable DVFS on A64
@ 2020-01-04 6:35 Vasily Khoruzhick
2020-01-04 6:35 ` [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Vasily Khoruzhick
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Vasily Khoruzhick @ 2020-01-04 6:35 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland,
Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree,
linux-clk
Cc: Vasily Khoruzhick
This series enables DVFS on Allwinner A64. Operating points table is taken
from BSP kernel.
Icenowy Zheng (1):
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
Vasily Khoruzhick (2):
clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS
arm64: dts: allwinner: a64: enable DVFS
.../allwinner/sun50i-a64-amarula-relic.dts | 4 +
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 +
.../dts/allwinner/sun50i-a64-nanopi-a64.dts | 4 +
.../dts/allwinner/sun50i-a64-olinuxino.dts | 4 +
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 +
.../boot/dts/allwinner/sun50i-a64-pine64.dts | 4 +
.../dts/allwinner/sun50i-a64-pinebook.dts | 4 +
.../allwinner/sun50i-a64-sopine-baseboard.dts | 4 +
.../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 4 +
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 4 +
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 102 ++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++-
drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 1 -
include/dt-bindings/clock/sun50i-a64-ccu.h | 1 +
14 files changed, 170 insertions(+), 2 deletions(-)
--
2.24.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock 2020-01-04 6:35 [PATCH 0/3] arm64: allwinner: a64: Enable DVFS on A64 Vasily Khoruzhick @ 2020-01-04 6:35 ` Vasily Khoruzhick 2020-01-04 6:42 ` Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS Vasily Khoruzhick 2 siblings, 1 reply; 10+ messages in thread From: Vasily Khoruzhick @ 2020-01-04 6:35 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree, linux-clk Cc: Icenowy Zheng, Vasily Khoruzhick From: Icenowy Zheng <icenowy@aosc.io> The A64 PLL_CPU clock has the same instability if some factor changed without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, H3. Add the mux and pll notifiers for A64 CPU clock to workaround the problem. Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> --- drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c index 49bd7a4c015c..5f66bf879772 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c @@ -921,11 +921,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = { .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets), }; +static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = { + .common = &pll_cpux_clk.common, + /* copy from pll_cpux_clk */ + .enable = BIT(31), + .lock = BIT(28), +}; + +static struct ccu_mux_nb sun50i_a64_cpu_nb = { + .common = &cpux_clk.common, + .cm = &cpux_clk.mux, + .delay_us = 1, /* > 8 clock cycles at 24 MHz */ + .bypass_index = 1, /* index of 24 MHz oscillator */ +}; + static int sun50i_a64_ccu_probe(struct platform_device *pdev) { struct resource *res; void __iomem *reg; u32 val; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); reg = devm_ioremap_resource(&pdev->dev, res); @@ -939,7 +954,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev) writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG); - return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc); + ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc); + if (ret) + return ret; + + /* Gate then ungate PLL CPU after any rate changes */ + ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb); + + /* Reparent CPU during PLL CPU rate changes */ + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, + &sun50i_a64_cpu_nb); + + return 0; } static const struct of_device_id sun50i_a64_ccu_ids[] = { -- 2.24.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock 2020-01-04 6:35 ` [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Vasily Khoruzhick @ 2020-01-04 6:42 ` Vasily Khoruzhick 2020-01-04 8:18 ` Maxime Ripard 0 siblings, 1 reply; 10+ messages in thread From: Vasily Khoruzhick @ 2020-01-04 6:42 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, arm-linux, devicetree, linux-clk Cc: Icenowy Zheng, Vasily Khoruzhick On Fri, Jan 3, 2020 at 10:35 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote: > > From: Icenowy Zheng <icenowy@aosc.io> > > The A64 PLL_CPU clock has the same instability if some factor changed > without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, > H3. > > Add the mux and pll notifiers for A64 CPU clock to workaround the > problem. > > Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> Ugh, didn't notice that email is wrong here, this patch is not related to my daytime job. Maxime, if patchset is OK please fix it up to be "Vasily Khoruzhick <anarsoul@gmail.com>", otherwise I'll resend v2 with correct sign off. > --- > drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c > index 49bd7a4c015c..5f66bf879772 100644 > --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c > +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c > @@ -921,11 +921,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = { > .num_resets = ARRAY_SIZE(sun50i_a64_ccu_resets), > }; > > +static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = { > + .common = &pll_cpux_clk.common, > + /* copy from pll_cpux_clk */ > + .enable = BIT(31), > + .lock = BIT(28), > +}; > + > +static struct ccu_mux_nb sun50i_a64_cpu_nb = { > + .common = &cpux_clk.common, > + .cm = &cpux_clk.mux, > + .delay_us = 1, /* > 8 clock cycles at 24 MHz */ > + .bypass_index = 1, /* index of 24 MHz oscillator */ > +}; > + > static int sun50i_a64_ccu_probe(struct platform_device *pdev) > { > struct resource *res; > void __iomem *reg; > u32 val; > + int ret; > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > reg = devm_ioremap_resource(&pdev->dev, res); > @@ -939,7 +954,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev) > > writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG); > > - return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc); > + ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc); > + if (ret) > + return ret; > + > + /* Gate then ungate PLL CPU after any rate changes */ > + ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb); > + > + /* Reparent CPU during PLL CPU rate changes */ > + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, > + &sun50i_a64_cpu_nb); > + > + return 0; > } > > static const struct of_device_id sun50i_a64_ccu_ids[] = { > -- > 2.24.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock 2020-01-04 6:42 ` Vasily Khoruzhick @ 2020-01-04 8:18 ` Maxime Ripard 0 siblings, 0 replies; 10+ messages in thread From: Maxime Ripard @ 2020-01-04 8:18 UTC (permalink / raw) To: Vasily Khoruzhick Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, arm-linux, devicetree, linux-clk, Icenowy Zheng, Vasily Khoruzhick [-- Attachment #1: Type: text/plain, Size: 897 bytes --] On Fri, Jan 03, 2020 at 10:42:35PM -0800, Vasily Khoruzhick wrote: > On Fri, Jan 3, 2020 at 10:35 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote: > > > > From: Icenowy Zheng <icenowy@aosc.io> > > > > The A64 PLL_CPU clock has the same instability if some factor changed > > without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33, > > H3. > > > > Add the mux and pll notifiers for A64 CPU clock to workaround the > > problem. > > > > Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > > Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com> > > Ugh, didn't notice that email is wrong here, this patch is not related > to my daytime job. Maxime, if patchset is OK please fix it up to be > "Vasily Khoruzhick <anarsoul@gmail.com>", otherwise I'll resend v2 > with correct sign off. Applied with your mail fixed, thanks! Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS 2020-01-04 6:35 [PATCH 0/3] arm64: allwinner: a64: Enable DVFS on A64 Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Vasily Khoruzhick @ 2020-01-04 6:35 ` Vasily Khoruzhick 2020-01-04 8:18 ` Maxime Ripard 2020-01-04 6:35 ` [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS Vasily Khoruzhick 2 siblings, 1 reply; 10+ messages in thread From: Vasily Khoruzhick @ 2020-01-04 6:35 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree, linux-clk Cc: Vasily Khoruzhick Export CLK_CPUX so we can reference it in CPU node. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- drivers/clk/sunxi-ng/ccu-sun50i-a64.h | 1 - include/dt-bindings/clock/sun50i-a64-ccu.h | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h index 979929276709..116e6f826d04 100644 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h @@ -36,7 +36,6 @@ #define CLK_PLL_HSIC 18 #define CLK_PLL_DE 19 #define CLK_PLL_DDR1 20 -#define CLK_CPUX 21 #define CLK_AXI 22 #define CLK_APB 23 #define CLK_AHB1 24 diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index a8ac4cfcdcbc..e512a1c9b0fc 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -46,6 +46,7 @@ #define CLK_PLL_VIDEO0 7 #define CLK_PLL_PERIPH0 11 +#define CLK_CPUX 21 #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 -- 2.24.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS 2020-01-04 6:35 ` [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS Vasily Khoruzhick @ 2020-01-04 8:18 ` Maxime Ripard 0 siblings, 0 replies; 10+ messages in thread From: Maxime Ripard @ 2020-01-04 8:18 UTC (permalink / raw) To: Vasily Khoruzhick Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree, linux-clk [-- Attachment #1: Type: text/plain, Size: 204 bytes --] On Fri, Jan 03, 2020 at 10:35:04PM -0800, Vasily Khoruzhick wrote: > Export CLK_CPUX so we can reference it in CPU node. > > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Applied, thanks! Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS 2020-01-04 6:35 [PATCH 0/3] arm64: allwinner: a64: Enable DVFS on A64 Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS Vasily Khoruzhick @ 2020-01-04 6:35 ` Vasily Khoruzhick 2020-01-04 8:37 ` Maxime Ripard 2 siblings, 1 reply; 10+ messages in thread From: Vasily Khoruzhick @ 2020-01-04 6:35 UTC (permalink / raw) To: Maxime Ripard, Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree, linux-clk Cc: Vasily Khoruzhick Add CPU regulator, CPU clock, operation points and thermal trip points to enable DVFS on A64 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- .../allwinner/sun50i-a64-amarula-relic.dts | 4 + .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 + .../dts/allwinner/sun50i-a64-nanopi-a64.dts | 4 + .../dts/allwinner/sun50i-a64-olinuxino.dts | 4 + .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 + .../boot/dts/allwinner/sun50i-a64-pine64.dts | 4 + .../dts/allwinner/sun50i-a64-pinebook.dts | 4 + .../allwinner/sun50i-a64-sopine-baseboard.dts | 4 + .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 4 + .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 4 + arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 102 ++++++++++++++++++ 11 files changed, 142 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 5634245d11db..43f6ac0beed6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -65,6 +65,10 @@ wifi_pwrseq: wifi-pwrseq { }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &csi { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 208373efee49..cbcab80de8c5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -108,6 +108,10 @@ &codec_analog { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 9b9d9157128c..6708acf94d01 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 01a9a52edae4..f94e60eb4ec2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index f54a415f2e3b..2793afba4884 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -123,6 +123,10 @@ &codec_analog { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 409523cb0950..04aa452d4400 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -84,6 +84,10 @@ &codec_analog { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 78c82a665c84..365d85c16deb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -98,6 +98,10 @@ &codec_analog { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 920103ec0046..e760e8efdf3e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -100,6 +100,10 @@ &codec_analog { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 9d20e13f0c02..3d8e2d452ce1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -51,6 +51,10 @@ &codec_analog { cpvdd-supply = <®_eldo1>; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 970415106dcf..28edcef8bed1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -104,6 +104,10 @@ &de { status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 5e3f16c3b706..7f37c8cd1b6e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -80,6 +80,52 @@ simplefb_hdmi: framebuffer-hdmi { }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -90,6 +136,10 @@ cpu0: cpu@0 { reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -98,6 +148,10 @@ cpu1: cpu@1 { reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -106,6 +160,10 @@ cpu2: cpu@2 { reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -114,6 +172,10 @@ cpu3: cpu@3 { reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; L2: l2-cache { @@ -218,6 +280,46 @@ cpu_thermal: cpu0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; gpu0_thermal: gpu0-thermal { -- 2.24.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS 2020-01-04 6:35 ` [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS Vasily Khoruzhick @ 2020-01-04 8:37 ` Maxime Ripard 2020-01-04 16:24 ` Vasily Khoruzhick 0 siblings, 1 reply; 10+ messages in thread From: Maxime Ripard @ 2020-01-04 8:37 UTC (permalink / raw) To: Vasily Khoruzhick Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, linux-arm-kernel, devicetree, linux-clk [-- Attachment #1: Type: text/plain, Size: 10572 bytes --] Hi! On Fri, Jan 03, 2020 at 10:35:05PM -0800, Vasily Khoruzhick wrote: > Add CPU regulator, CPU clock, operation points and thermal trip points > to enable DVFS on A64 > > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> > --- > .../allwinner/sun50i-a64-amarula-relic.dts | 4 + > .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 + > .../dts/allwinner/sun50i-a64-nanopi-a64.dts | 4 + > .../dts/allwinner/sun50i-a64-olinuxino.dts | 4 + > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 + > .../boot/dts/allwinner/sun50i-a64-pine64.dts | 4 + > .../dts/allwinner/sun50i-a64-pinebook.dts | 4 + > .../allwinner/sun50i-a64-sopine-baseboard.dts | 4 + > .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 4 + > .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 4 + > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 102 ++++++++++++++++++ > 11 files changed, 142 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > index 5634245d11db..43f6ac0beed6 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > @@ -65,6 +65,10 @@ wifi_pwrseq: wifi-pwrseq { > }; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &csi { > status = "okay"; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > index 208373efee49..cbcab80de8c5 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > @@ -108,6 +108,10 @@ &codec_analog { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &dai { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > index 9b9d9157128c..6708acf94d01 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { > }; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &de { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > index 01a9a52edae4..f94e60eb4ec2 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { > }; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &de { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > index f54a415f2e3b..2793afba4884 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > @@ -123,6 +123,10 @@ &codec_analog { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &dai { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > index 409523cb0950..04aa452d4400 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > @@ -84,6 +84,10 @@ &codec_analog { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &dai { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > index 78c82a665c84..365d85c16deb 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > @@ -98,6 +98,10 @@ &codec_analog { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &dai { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > index 920103ec0046..e760e8efdf3e 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > @@ -100,6 +100,10 @@ &codec_analog { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &dai { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > index 9d20e13f0c02..3d8e2d452ce1 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > @@ -51,6 +51,10 @@ &codec_analog { > cpvdd-supply = <®_eldo1>; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &mmc0 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc0_pins>; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > index 970415106dcf..28edcef8bed1 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > @@ -104,6 +104,10 @@ &de { > status = "okay"; > }; > > +&cpu0 { > + cpu-supply = <®_dcdc2>; > +}; > + > &ehci1 { > status = "okay"; > }; Did you test it on all those boards (and if so, how were the OPP tested), or was it done simply by looking at the schematics? > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > index 5e3f16c3b706..7f37c8cd1b6e 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -80,6 +80,52 @@ simplefb_hdmi: framebuffer-hdmi { > }; > }; > > + cpu0_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-648000000 { > + opp-hz = /bits/ 64 <648000000>; > + opp-microvolt = <1040000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-816000000 { > + opp-hz = /bits/ 64 <816000000>; > + opp-microvolt = <1100000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; Nit: having new lines between the nodes would be great > + opp-912000000 { > + opp-hz = /bits/ 64 <912000000>; > + opp-microvolt = <1120000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-960000000 { > + opp-hz = /bits/ 64 <960000000>; > + opp-microvolt = <1160000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-1008000000 { > + opp-hz = /bits/ 64 <1008000000>; > + opp-microvolt = <1200000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-1056000000 { > + opp-hz = /bits/ 64 <1056000000>; > + opp-microvolt = <1240000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-1104000000 { > + opp-hz = /bits/ 64 <1104000000>; > + opp-microvolt = <1260000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + opp-1152000000 { > + opp-hz = /bits/ 64 <1152000000>; > + opp-microvolt = <1300000>; > + clock-latency-ns = <244144>; /* 8 32k periods */ > + }; > + }; > + What frequency is setup by U-Boot? If it's 1008 MHz as usual, then having the OPP above that frequency by default means that a board that doesn't set cpu-supply (or doesn't set it up properly) will be unstable, since it will increase the frequency, but not the voltage, and the voltage isn't enough for that new frequency. The way we've done it so far on the SoCs in a similar situation (A33, A83t) is only to list the OPP below the frequency set up by U-Boot in the DTSI, and list the frequencies above that in the boards that add cpu-supply. Given that it seems that we need to have them listed on number of boards, I guess we could add a separate DTSI that would be included only by the boards setting cpu-supply? > cpus { > #address-cells = <1>; > #size-cells = <0>; > @@ -90,6 +136,10 @@ cpu0: cpu@0 { > reg = <0>; > enable-method = "psci"; > next-level-cache = <&L2>; > + clocks = <&ccu CLK_CPUX>; > + clock-names = "cpu"; > + operating-points-v2 = <&cpu0_opp_table>; > + #cooling-cells = <2>; > }; > > cpu1: cpu@1 { > @@ -98,6 +148,10 @@ cpu1: cpu@1 { > reg = <1>; > enable-method = "psci"; > next-level-cache = <&L2>; > + clocks = <&ccu CLK_CPUX>; > + clock-names = "cpu"; > + operating-points-v2 = <&cpu0_opp_table>; > + #cooling-cells = <2>; > }; > > cpu2: cpu@2 { > @@ -106,6 +160,10 @@ cpu2: cpu@2 { > reg = <2>; > enable-method = "psci"; > next-level-cache = <&L2>; > + clocks = <&ccu CLK_CPUX>; > + clock-names = "cpu"; > + operating-points-v2 = <&cpu0_opp_table>; > + #cooling-cells = <2>; > }; > > cpu3: cpu@3 { > @@ -114,6 +172,10 @@ cpu3: cpu@3 { > reg = <3>; > enable-method = "psci"; > next-level-cache = <&L2>; > + clocks = <&ccu CLK_CPUX>; > + clock-names = "cpu"; > + operating-points-v2 = <&cpu0_opp_table>; > + #cooling-cells = <2>; > }; > > L2: l2-cache { > @@ -218,6 +280,46 @@ cpu_thermal: cpu0-thermal { > polling-delay-passive = <0>; > polling-delay = <0>; > thermal-sensors = <&ths 0>; > + > + cooling-maps { > + map0 { > + trip = <&cpu_alert0>; > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu_alert1>; > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + > + trips { > + cpu_alert0: cpu_alert0 { > + /* milliCelsius */ > + temperature = <75000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu_alert1: cpu_alert1 { > + /* milliCelsius */ > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + cpu_crit: cpu_crit { > + /* milliCelsius */ > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > }; Where are those tripping points coming from? Thanks! Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS 2020-01-04 8:37 ` Maxime Ripard @ 2020-01-04 16:24 ` Vasily Khoruzhick 2020-01-07 17:09 ` Maxime Ripard 0 siblings, 1 reply; 10+ messages in thread From: Vasily Khoruzhick @ 2020-01-04 16:24 UTC (permalink / raw) To: Maxime Ripard Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, arm-linux, devicetree, linux-clk On Sat, Jan 4, 2020 at 12:37 AM Maxime Ripard <mripard@kernel.org> wrote: > > Hi! > > On Fri, Jan 03, 2020 at 10:35:05PM -0800, Vasily Khoruzhick wrote: > > Add CPU regulator, CPU clock, operation points and thermal trip points > > to enable DVFS on A64 > > > > Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> > > --- > > .../allwinner/sun50i-a64-amarula-relic.dts | 4 + > > .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 + > > .../dts/allwinner/sun50i-a64-nanopi-a64.dts | 4 + > > .../dts/allwinner/sun50i-a64-olinuxino.dts | 4 + > > .../dts/allwinner/sun50i-a64-orangepi-win.dts | 4 + > > .../boot/dts/allwinner/sun50i-a64-pine64.dts | 4 + > > .../dts/allwinner/sun50i-a64-pinebook.dts | 4 + > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 4 + > > .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 4 + > > .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 4 + > > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 102 ++++++++++++++++++ > > 11 files changed, 142 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > > index 5634245d11db..43f6ac0beed6 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > > @@ -65,6 +65,10 @@ wifi_pwrseq: wifi-pwrseq { > > }; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &csi { > > status = "okay"; > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > > index 208373efee49..cbcab80de8c5 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts > > @@ -108,6 +108,10 @@ &codec_analog { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &dai { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > > index 9b9d9157128c..6708acf94d01 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts > > @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { > > }; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &de { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > > index 01a9a52edae4..f94e60eb4ec2 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts > > @@ -87,6 +87,10 @@ wifi_pwrseq: wifi_pwrseq { > > }; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &de { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > > index f54a415f2e3b..2793afba4884 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts > > @@ -123,6 +123,10 @@ &codec_analog { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &dai { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > > index 409523cb0950..04aa452d4400 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts > > @@ -84,6 +84,10 @@ &codec_analog { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &dai { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > > index 78c82a665c84..365d85c16deb 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts > > @@ -98,6 +98,10 @@ &codec_analog { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &dai { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > index 920103ec0046..e760e8efdf3e 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > @@ -100,6 +100,10 @@ &codec_analog { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &dai { > > status = "okay"; > > }; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > > index 9d20e13f0c02..3d8e2d452ce1 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi > > @@ -51,6 +51,10 @@ &codec_analog { > > cpvdd-supply = <®_eldo1>; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &mmc0 { > > pinctrl-names = "default"; > > pinctrl-0 = <&mmc0_pins>; > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > index 970415106dcf..28edcef8bed1 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > @@ -104,6 +104,10 @@ &de { > > status = "okay"; > > }; > > > > +&cpu0 { > > + cpu-supply = <®_dcdc2>; > > +}; > > + > > &ehci1 { > > status = "okay"; > > }; > > Did you test it on all those boards (and if so, how were the OPP > tested), or was it done simply by looking at the schematics? I tested it only on Pine64-LTS and Pinebook. But all these boards use AXP803 which always uses DCDC2 as CPU regulator. > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > > index 5e3f16c3b706..7f37c8cd1b6e 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > > @@ -80,6 +80,52 @@ simplefb_hdmi: framebuffer-hdmi { > > }; > > }; > > > > + cpu0_opp_table: opp_table0 { > > + compatible = "operating-points-v2"; > > + opp-shared; > > + > > + opp-648000000 { > > + opp-hz = /bits/ 64 <648000000>; > > + opp-microvolt = <1040000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-816000000 { > > + opp-hz = /bits/ 64 <816000000>; > > + opp-microvolt = <1100000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > Nit: having new lines between the nodes would be great Will do. > > + opp-912000000 { > > + opp-hz = /bits/ 64 <912000000>; > > + opp-microvolt = <1120000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-960000000 { > > + opp-hz = /bits/ 64 <960000000>; > > + opp-microvolt = <1160000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-1008000000 { > > + opp-hz = /bits/ 64 <1008000000>; > > + opp-microvolt = <1200000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-1056000000 { > > + opp-hz = /bits/ 64 <1056000000>; > > + opp-microvolt = <1240000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-1104000000 { > > + opp-hz = /bits/ 64 <1104000000>; > > + opp-microvolt = <1260000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + opp-1152000000 { > > + opp-hz = /bits/ 64 <1152000000>; > > + opp-microvolt = <1300000>; > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > + }; > > + }; > > + > > What frequency is setup by U-Boot? It's 816 MHz > If it's 1008 MHz as usual, then having the OPP above that frequency by > default means that a board that doesn't set cpu-supply (or doesn't set > it up properly) will be unstable, since it will increase the > frequency, but not the voltage, and the voltage isn't enough for that > new frequency. > > The way we've done it so far on the SoCs in a similar situation (A33, > A83t) is only to list the OPP below the frequency set up by U-Boot in > the DTSI, and list the frequencies above that in the boards that add > cpu-supply. > > Given that it seems that we need to have them listed on number of > boards, I guess we could add a separate DTSI that would be included > only by the boards setting cpu-supply? Currently all the A64 boards that we support use AXP803, so I'm not sure whether we actually need that. We can just define CPU regulator for them and use default OPP and that's exactly what I did. > > cpus { > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -90,6 +136,10 @@ cpu0: cpu@0 { > > reg = <0>; > > enable-method = "psci"; > > next-level-cache = <&L2>; > > + clocks = <&ccu CLK_CPUX>; > > + clock-names = "cpu"; > > + operating-points-v2 = <&cpu0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > cpu1: cpu@1 { > > @@ -98,6 +148,10 @@ cpu1: cpu@1 { > > reg = <1>; > > enable-method = "psci"; > > next-level-cache = <&L2>; > > + clocks = <&ccu CLK_CPUX>; > > + clock-names = "cpu"; > > + operating-points-v2 = <&cpu0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > cpu2: cpu@2 { > > @@ -106,6 +160,10 @@ cpu2: cpu@2 { > > reg = <2>; > > enable-method = "psci"; > > next-level-cache = <&L2>; > > + clocks = <&ccu CLK_CPUX>; > > + clock-names = "cpu"; > > + operating-points-v2 = <&cpu0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > cpu3: cpu@3 { > > @@ -114,6 +172,10 @@ cpu3: cpu@3 { > > reg = <3>; > > enable-method = "psci"; > > next-level-cache = <&L2>; > > + clocks = <&ccu CLK_CPUX>; > > + clock-names = "cpu"; > > + operating-points-v2 = <&cpu0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > L2: l2-cache { > > @@ -218,6 +280,46 @@ cpu_thermal: cpu0-thermal { > > polling-delay-passive = <0>; > > polling-delay = <0>; > > thermal-sensors = <&ths 0>; > > + > > + cooling-maps { > > + map0 { > > + trip = <&cpu_alert0>; > > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > > + }; > > + map1 { > > + trip = <&cpu_alert1>; > > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > > + }; > > + }; > > + > > + trips { > > + cpu_alert0: cpu_alert0 { > > + /* milliCelsius */ > > + temperature = <75000>; > > + hysteresis = <2000>; > > + type = "passive"; > > + }; > > + > > + cpu_alert1: cpu_alert1 { > > + /* milliCelsius */ > > + temperature = <90000>; > > + hysteresis = <2000>; > > + type = "hot"; > > + }; > > + > > + cpu_crit: cpu_crit { > > + /* milliCelsius */ > > + temperature = <110000>; > > + hysteresis = <2000>; > > + type = "critical"; > > + }; > > + }; > > }; > > Where are those tripping points coming from? These are taken from A33 dtsi. I couldn't find any recommended throttling and critical temp in A64 user manual [1]. [1] http://linux-sunxi.org/images/b/b4/Allwinner_A64_User_Manual_V1.1.pdf > Thanks! > Maxime ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS 2020-01-04 16:24 ` Vasily Khoruzhick @ 2020-01-07 17:09 ` Maxime Ripard 0 siblings, 0 replies; 10+ messages in thread From: Maxime Ripard @ 2020-01-07 17:09 UTC (permalink / raw) To: Vasily Khoruzhick Cc: Chen-Yu Tsai, Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd, arm-linux, devicetree, linux-clk [-- Attachment #1: Type: text/plain, Size: 8514 bytes --] Hi, On Sat, Jan 04, 2020 at 08:24:01AM -0800, Vasily Khoruzhick wrote: > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > > @@ -104,6 +104,10 @@ &de { > > > status = "okay"; > > > }; > > > > > > +&cpu0 { > > > + cpu-supply = <®_dcdc2>; > > > +}; > > > + > > > &ehci1 { > > > status = "okay"; > > > }; > > > > Did you test it on all those boards (and if so, how were the OPP > > tested), or was it done simply by looking at the schematics? > > I tested it only on Pine64-LTS and Pinebook. But all these boards use > AXP803 which always uses DCDC2 as CPU regulator. Ok. How were those OPPs picked and tested? > > > + opp-912000000 { > > > + opp-hz = /bits/ 64 <912000000>; > > > + opp-microvolt = <1120000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + opp-960000000 { > > > + opp-hz = /bits/ 64 <960000000>; > > > + opp-microvolt = <1160000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + opp-1008000000 { > > > + opp-hz = /bits/ 64 <1008000000>; > > > + opp-microvolt = <1200000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + opp-1056000000 { > > > + opp-hz = /bits/ 64 <1056000000>; > > > + opp-microvolt = <1240000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + opp-1104000000 { > > > + opp-hz = /bits/ 64 <1104000000>; > > > + opp-microvolt = <1260000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + opp-1152000000 { > > > + opp-hz = /bits/ 64 <1152000000>; > > > + opp-microvolt = <1300000>; > > > + clock-latency-ns = <244144>; /* 8 32k periods */ > > > + }; > > > + }; > > > + > > > > What frequency is setup by U-Boot? > > It's 816 MHz > > > If it's 1008 MHz as usual, then having the OPP above that frequency by > > default means that a board that doesn't set cpu-supply (or doesn't set > > it up properly) will be unstable, since it will increase the > > frequency, but not the voltage, and the voltage isn't enough for that > > new frequency. > > > > The way we've done it so far on the SoCs in a similar situation (A33, > > A83t) is only to list the OPP below the frequency set up by U-Boot in > > the DTSI, and list the frequencies above that in the boards that add > > cpu-supply. > > > > Given that it seems that we need to have them listed on number of > > boards, I guess we could add a separate DTSI that would be included > > only by the boards setting cpu-supply? > > Currently all the A64 boards that we support use AXP803, so I'm not > sure whether we actually need that. We can just define CPU regulator > for them and use default OPP and that's exactly what I did. Yeah, but none of them have been supporting it since day one. Having these OPPs now mean that the very first thing you'll need to do is to bringup the PMIC as well, otherwise the system will crash. And to the person doing the bringup, this will be far from obvious that a) we have that requirement b) the crash that they are seeing is due to cpufreq. > > > cpus { > > > #address-cells = <1>; > > > #size-cells = <0>; > > > @@ -90,6 +136,10 @@ cpu0: cpu@0 { > > > reg = <0>; > > > enable-method = "psci"; > > > next-level-cache = <&L2>; > > > + clocks = <&ccu CLK_CPUX>; > > > + clock-names = "cpu"; > > > + operating-points-v2 = <&cpu0_opp_table>; > > > + #cooling-cells = <2>; > > > }; > > > > > > cpu1: cpu@1 { > > > @@ -98,6 +148,10 @@ cpu1: cpu@1 { > > > reg = <1>; > > > enable-method = "psci"; > > > next-level-cache = <&L2>; > > > + clocks = <&ccu CLK_CPUX>; > > > + clock-names = "cpu"; > > > + operating-points-v2 = <&cpu0_opp_table>; > > > + #cooling-cells = <2>; > > > }; > > > > > > cpu2: cpu@2 { > > > @@ -106,6 +160,10 @@ cpu2: cpu@2 { > > > reg = <2>; > > > enable-method = "psci"; > > > next-level-cache = <&L2>; > > > + clocks = <&ccu CLK_CPUX>; > > > + clock-names = "cpu"; > > > + operating-points-v2 = <&cpu0_opp_table>; > > > + #cooling-cells = <2>; > > > }; > > > > > > cpu3: cpu@3 { > > > @@ -114,6 +172,10 @@ cpu3: cpu@3 { > > > reg = <3>; > > > enable-method = "psci"; > > > next-level-cache = <&L2>; > > > + clocks = <&ccu CLK_CPUX>; > > > + clock-names = "cpu"; > > > + operating-points-v2 = <&cpu0_opp_table>; > > > + #cooling-cells = <2>; > > > }; > > > > > > L2: l2-cache { > > > @@ -218,6 +280,46 @@ cpu_thermal: cpu0-thermal { > > > polling-delay-passive = <0>; > > > polling-delay = <0>; > > > thermal-sensors = <&ths 0>; > > > + > > > + cooling-maps { > > > + map0 { > > > + trip = <&cpu_alert0>; > > > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > > > + }; > > > + map1 { > > > + trip = <&cpu_alert1>; > > > + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > > > + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > > > + }; > > > + }; > > > + > > > + trips { > > > + cpu_alert0: cpu_alert0 { > > > + /* milliCelsius */ > > > + temperature = <75000>; > > > + hysteresis = <2000>; > > > + type = "passive"; > > > + }; > > > + > > > + cpu_alert1: cpu_alert1 { > > > + /* milliCelsius */ > > > + temperature = <90000>; > > > + hysteresis = <2000>; > > > + type = "hot"; > > > + }; > > > + > > > + cpu_crit: cpu_crit { > > > + /* milliCelsius */ > > > + temperature = <110000>; > > > + hysteresis = <2000>; > > > + type = "critical"; > > > + }; > > > + }; > > > }; > > > > Where are those tripping points coming from? > > These are taken from A33 dtsi. I couldn't find any recommended > throttling and critical temp in A64 user manual [1]. > > [1] http://linux-sunxi.org/images/b/b4/Allwinner_A64_User_Manual_V1.1.pdf Ok. Can you mention that in the commit log? Thanks! Maxime [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-01-07 17:09 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-01-04 6:35 [PATCH 0/3] arm64: allwinner: a64: Enable DVFS on A64 Vasily Khoruzhick 2020-01-04 6:35 ` [PATCH 1/3] clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock Vasily Khoruzhick 2020-01-04 6:42 ` Vasily Khoruzhick 2020-01-04 8:18 ` Maxime Ripard 2020-01-04 6:35 ` [PATCH 2/3] clk: sunxi-ng: a64: export CLK_CPUX clock for DVFS Vasily Khoruzhick 2020-01-04 8:18 ` Maxime Ripard 2020-01-04 6:35 ` [PATCH 3/3] arm64: dts: allwinner: a64: enable DVFS Vasily Khoruzhick 2020-01-04 8:37 ` Maxime Ripard 2020-01-04 16:24 ` Vasily Khoruzhick 2020-01-07 17:09 ` Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).