linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: jbrunet@baylibre.com, linux-amlogic@lists.infradead.org
Cc: narmstrong@baylibre.com, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 1/2] clk: meson: meson8b: add the vclk_en gate clock
Date: Mon, 29 Jun 2020 22:39:03 +0200	[thread overview]
Message-ID: <20200629203904.2989007-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20200629203904.2989007-1-martin.blumenstingl@googlemail.com>

HHI_VID_CLK_CNTL[19] is documented as CLK_EN0. This description is the
same in the public S912 datasheet and the GXBB driver calls this gate
"vclk". Add this gate clock to the Meson8/Meson8b/Meson8m2 clock
controller because it's needed to make the video output work.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 30 +++++++++++++++++++++++++-----
 drivers/clk/meson/meson8b.h |  3 ++-
 2 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 3d826711c820..d5b90d61a530 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1204,6 +1204,22 @@ static struct clk_regmap meson8b_vclk_in_en = {
 	},
 };
 
+static struct clk_regmap meson8b_vclk_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_VID_CLK_CNTL,
+		.bit_idx = 19,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "vclk_en",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&meson8b_vclk_in_en.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static struct clk_regmap meson8b_vclk_div1_gate = {
 	.data = &(struct clk_regmap_gate_data){
 		.offset = HHI_VID_CLK_CNTL,
@@ -1213,7 +1229,7 @@ static struct clk_regmap meson8b_vclk_div1_gate = {
 		.name = "vclk_div1_en",
 		.ops = &clk_regmap_gate_ro_ops,
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_vclk_in_en.hw
+			&meson8b_vclk_en.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1227,7 +1243,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = {
 		.name = "vclk_div2",
 		.ops = &clk_fixed_factor_ops,
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_vclk_in_en.hw
+			&meson8b_vclk_en.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1257,7 +1273,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = {
 		.name = "vclk_div4",
 		.ops = &clk_fixed_factor_ops,
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_vclk_in_en.hw
+			&meson8b_vclk_en.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1287,7 +1303,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = {
 		.name = "vclk_div6",
 		.ops = &clk_fixed_factor_ops,
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_vclk_in_en.hw
+			&meson8b_vclk_en.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1317,7 +1333,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = {
 		.name = "vclk_div12",
 		.ops = &clk_fixed_factor_ops,
 		.parent_hws = (const struct clk_hw *[]) {
-			&meson8b_vclk_in_en.hw
+			&meson8b_vclk_en.hw
 		},
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -2820,6 +2836,7 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = {
 		[CLKID_VID_PLL_FINAL_DIV]   = &meson8b_vid_pll_final_div.hw,
 		[CLKID_VCLK_IN_SEL]	    = &meson8b_vclk_in_sel.hw,
 		[CLKID_VCLK_IN_EN]	    = &meson8b_vclk_in_en.hw,
+		[CLKID_VCLK_EN]		    = &meson8b_vclk_en.hw,
 		[CLKID_VCLK_DIV1]	    = &meson8b_vclk_div1_gate.hw,
 		[CLKID_VCLK_DIV2_DIV]	    = &meson8b_vclk_div2_div.hw,
 		[CLKID_VCLK_DIV2]	    = &meson8b_vclk_div2_div_gate.hw,
@@ -3025,6 +3042,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_VID_PLL_FINAL_DIV]   = &meson8b_vid_pll_final_div.hw,
 		[CLKID_VCLK_IN_SEL]	    = &meson8b_vclk_in_sel.hw,
 		[CLKID_VCLK_IN_EN]	    = &meson8b_vclk_in_en.hw,
+		[CLKID_VCLK_EN]		    = &meson8b_vclk_en.hw,
 		[CLKID_VCLK_DIV1]	    = &meson8b_vclk_div1_gate.hw,
 		[CLKID_VCLK_DIV2_DIV]	    = &meson8b_vclk_div2_div.hw,
 		[CLKID_VCLK_DIV2]	    = &meson8b_vclk_div2_div_gate.hw,
@@ -3241,6 +3259,7 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = {
 		[CLKID_VID_PLL_FINAL_DIV]   = &meson8b_vid_pll_final_div.hw,
 		[CLKID_VCLK_IN_SEL]	    = &meson8b_vclk_in_sel.hw,
 		[CLKID_VCLK_IN_EN]	    = &meson8b_vclk_in_en.hw,
+		[CLKID_VCLK_EN]		    = &meson8b_vclk_en.hw,
 		[CLKID_VCLK_DIV1]	    = &meson8b_vclk_div1_gate.hw,
 		[CLKID_VCLK_DIV2_DIV]	    = &meson8b_vclk_div2_div.hw,
 		[CLKID_VCLK_DIV2]	    = &meson8b_vclk_div2_div_gate.hw,
@@ -3443,6 +3462,7 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
 	&meson8b_vid_pll_final_div,
 	&meson8b_vclk_in_sel,
 	&meson8b_vclk_in_en,
+	&meson8b_vclk_en,
 	&meson8b_vclk_div1_gate,
 	&meson8b_vclk_div2_div_gate,
 	&meson8b_vclk_div4_div_gate,
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index cd38ae2a9cb5..c8ab2a632295 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -180,8 +180,9 @@
 #define CLKID_CTS_AMCLK_DIV	208
 #define CLKID_CTS_MCLK_I958_SEL	210
 #define CLKID_CTS_MCLK_I958_DIV	211
+#define CLKID_VCLK_EN		214
 
-#define CLK_NR_CLKS		214
+#define CLK_NR_CLKS		215
 
 /*
  * include the CLKID and RESETID that have
-- 
2.27.0


  reply	other threads:[~2020-06-29 20:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-29 20:39 [PATCH 0/2] clk: meson8b: add two missing gate clocks Martin Blumenstingl
2020-06-29 20:39 ` Martin Blumenstingl [this message]
2020-06-29 20:39 ` [PATCH 2/2] clk: meson: meson8b: add the vclk2_en gate clock Martin Blumenstingl
2020-07-09 17:16 ` [PATCH 0/2] clk: meson8b: add two missing gate clocks Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200629203904.2989007-2-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=jbrunet@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).