[PATCH 0/9] Add imx8ulp clock & reset driver support

[PATCH 0/9] Add imx8ulp clock & reset driver support

[Jacky Bai]

This patchset adds the clock & reset driver support for i.MX8ULP.
For some of the PCC slot, As there is a SWRST control bit share
the same pcc register for peripheral reset ccontrol. To simplify
the case, register the pcc reset controller driver when pcc
clock driver is registered.

Patch 1/9  for the dt-bindings part is send out for review previously
with the dts patchset:
https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210607083921.2668568-1-ping.bai@nxp.com/

Shawn suggests to send out the clock driver part firstly, so this
patch is included in this patchset for now.

Anson Huang (1):
  clk: imx: disable i.mx7ulp composite clock during initialization

Jacky Bai (8):
  dt-bindings: clock: Add imx8ulp clock support
  clk: imx: Update the pllv4 to support imx8ulp
  clk: imx: Update the compsite driver to support imx8ulp
  clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
  clk: imx: disable the pfd when set pfdv2 clock rate
  clk: imx: Update the pfdv2 for 8ulp specific support
  clk: imx: Add clock driver for imx8ulp
  clk: imx: Add the pcc reset controller support on imx8ulp

 .../bindings/clock/imx8ulp-clock.yaml         | 128 ++++
 drivers/clk/imx/Kconfig                       |   7 +
 drivers/clk/imx/Makefile                      |   2 +
 drivers/clk/imx/clk-composite-7ulp.c          |  87 ++-
 drivers/clk/imx/clk-imx7ulp.c                 |  20 +-
 drivers/clk/imx/clk-imx8ulp.c                 | 574 ++++++++++++++++++
 drivers/clk/imx/clk-pfdv2.c                   |  22 +-
 drivers/clk/imx/clk-pllv4.c                   |  34 +-
 drivers/clk/imx/clk.h                         |  24 +-
 include/dt-bindings/clock/imx8ulp-clock.h     | 262 ++++++++
 include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++
 11 files changed, 1187 insertions(+), 32 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
 create mode 100644 drivers/clk/imx/clk-imx8ulp.c
 create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h
 create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h

-- 
2.26.2

[PATCH 1/9] dt-bindings: clock: Add imx8ulp clock support

[Jacky Bai]

Add the clock dt-binding file for i.MX8ULP.

For pcc node, it will also be used as a reset controller,
so add the '#reset-cells' property description and add the
pcc reset IDs.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 changes:
  - Move this patch from dts patchset into this patchset
  - Resolve Rob's comments
---
 .../bindings/clock/imx8ulp-clock.yaml         | 128 +++++++++
 include/dt-bindings/clock/imx8ulp-clock.h     | 262 ++++++++++++++++++
 include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++++
 3 files changed, 449 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
 create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h
 create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h

diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
new file mode 100644
index 000000000000..9eb0c3c2a49d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Control Module Binding
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device. PCC modules control clock selection,
+  optional division and clock gating mode for peripherals
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8ulp-cgc1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: rosc
+            - description: sosc
+            - description: frosc
+            - description: lposc
+
+        clock-names:
+          items:
+            - const: rosc
+            - const: sosc
+            - const: frosc
+            - const: lposc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8ulp-cgc2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: sosc
+            - description: frosc
+
+        clock-names:
+          items:
+            - const: sosc
+            - const: frosc
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8ulp-cgc1
+              - fsl,imx8ulp-cgc2
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8ulp-pcc3
+              - fsl,imx8ulp-pcc4
+              - fsl,imx8ulp-pcc5
+    then:
+      required:
+        - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
+        clock-names = "rosc", "sosc", "frosc", "lposc";
+        #clock-cells = <1>;
+    };
+
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h
new file mode 100644
index 000000000000..cb449c991643
--- /dev/null
+++ b/include/dt-bindings/clock/imx8ulp-clock.h
@@ -0,0 +1,262 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H
+#define __DT_BINDINGS_CLOCK_IMX8ULP_H
+
+#define IMX8ULP_CLK_DUMMY			0
+#define IMX8ULP_CLK_ROSC			1
+#define IMX8ULP_CLK_FROSC			2
+#define IMX8ULP_CLK_LPOSC			3
+#define IMX8ULP_CLK_SOSC			4
+
+/* CGC1 */
+#define IMX8ULP_CLK_SPLL2			5
+#define IMX8ULP_CLK_SPLL3			6
+#define IMX8ULP_CLK_A35_SEL			7
+#define IMX8ULP_CLK_A35_DIV			8
+#define IMX8ULP_CLK_SPLL2_PRE_SEL		9
+#define IMX8ULP_CLK_SPLL3_PRE_SEL		10
+#define IMX8ULP_CLK_SPLL3_PFD0			11
+#define IMX8ULP_CLK_SPLL3_PFD1			12
+#define IMX8ULP_CLK_SPLL3_PFD2			13
+#define IMX8ULP_CLK_SPLL3_PFD3			14
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV1		15
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV2		16
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV1		17
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV2		18
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV1		19
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV2		20
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV1		21
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV2		22
+#define IMX8ULP_CLK_NIC_SEL			23
+#define IMX8ULP_CLK_NIC_AD_DIVPLAT		24
+#define IMX8ULP_CLK_NIC_PER_DIVPLAT		25
+#define IMX8ULP_CLK_XBAR_SEL			26
+#define IMX8ULP_CLK_XBAR_AD_DIVPLAT		27
+#define IMX8ULP_CLK_XBAR_DIVBUS			28
+#define IMX8ULP_CLK_XBAR_AD_SLOW		29
+#define IMX8ULP_CLK_SOSC_DIV1			30
+#define IMX8ULP_CLK_SOSC_DIV2			31
+#define IMX8ULP_CLK_SOSC_DIV3			32
+#define IMX8ULP_CLK_FROSC_DIV1			33
+#define IMX8ULP_CLK_FROSC_DIV2			34
+#define IMX8ULP_CLK_FROSC_DIV3			35
+#define IMX8ULP_CLK_SPLL3_VCODIV		36
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE	37
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE	38
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE	39
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE	40
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE	41
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE	42
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE	43
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE	44
+#define IMX8ULP_CLK_SOSC_DIV1_GATE		45
+#define IMX8ULP_CLK_SOSC_DIV2_GATE		46
+#define IMX8ULP_CLK_SOSC_DIV3_GATE		47
+#define IMX8ULP_CLK_FROSC_DIV1_GATE		48
+#define IMX8ULP_CLK_FROSC_DIV2_GATE		49
+#define IMX8ULP_CLK_FROSC_DIV3_GATE		50
+#define IMX8ULP_CLK_SAI4_SEL			51
+#define IMX8ULP_CLK_SAI5_SEL			52
+#define IMX8ULP_CLK_AUD_CLK1			53
+#define IMX8ULP_CLK_ARM				54
+#define IMX8ULP_CLK_ENET_TS_SEL			55
+
+#define IMX8ULP_CLK_CGC1_END			56
+
+/* CGC2 */
+#define IMX8ULP_CLK_PLL4_PRE_SEL	0
+#define IMX8ULP_CLK_PLL4		1
+#define IMX8ULP_CLK_PLL4_VCODIV		2
+#define IMX8ULP_CLK_DDR_SEL		3
+#define IMX8ULP_CLK_DDR_DIV		4
+#define IMX8ULP_CLK_LPAV_AXI_SEL	5
+#define IMX8ULP_CLK_LPAV_AXI_DIV	6
+#define IMX8ULP_CLK_LPAV_AHB_DIV	7
+#define IMX8ULP_CLK_LPAV_BUS_DIV	8
+#define IMX8ULP_CLK_PLL4_PFD0		9
+#define IMX8ULP_CLK_PLL4_PFD1		10
+#define IMX8ULP_CLK_PLL4_PFD2		11
+#define IMX8ULP_CLK_PLL4_PFD3		12
+#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE	13
+#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE	14
+#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE	15
+#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE	16
+#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE	17
+#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE	18
+#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE	19
+#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE	20
+#define IMX8ULP_CLK_PLL4_PFD0_DIV1	21
+#define IMX8ULP_CLK_PLL4_PFD0_DIV2	22
+#define IMX8ULP_CLK_PLL4_PFD1_DIV1	23
+#define IMX8ULP_CLK_PLL4_PFD1_DIV2	24
+#define IMX8ULP_CLK_PLL4_PFD2_DIV1	25
+#define IMX8ULP_CLK_PLL4_PFD2_DIV2	26
+#define IMX8ULP_CLK_PLL4_PFD3_DIV1	27
+#define IMX8ULP_CLK_PLL4_PFD3_DIV2	28
+#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE	29
+#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE	30
+#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE	31
+#define IMX8ULP_CLK_CGC2_SOSC_DIV1	32
+#define IMX8ULP_CLK_CGC2_SOSC_DIV2	33
+#define IMX8ULP_CLK_CGC2_SOSC_DIV3	34
+#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE	35
+#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE	36
+#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE	37
+#define IMX8ULP_CLK_CGC2_FROSC_DIV1	38
+#define IMX8ULP_CLK_CGC2_FROSC_DIV2	39
+#define IMX8ULP_CLK_CGC2_FROSC_DIV3	40
+#define IMX8ULP_CLK_AUD_CLK2		41
+#define IMX8ULP_CLK_SAI6_SEL		42
+#define IMX8ULP_CLK_SAI7_SEL		43
+#define IMX8ULP_CLK_SPDIF_SEL		44
+#define IMX8ULP_CLK_HIFI_SEL		45
+#define IMX8ULP_CLK_HIFI_DIVCORE	46
+#define IMX8ULP_CLK_HIFI_DIVPLAT	47
+#define IMX8ULP_CLK_DSI_PHY_REF		48
+
+#define IMX8ULP_CLK_CGC2_END		49
+
+/* PCC3 */
+#define IMX8ULP_CLK_WDOG3		0
+#define IMX8ULP_CLK_WDOG4		1
+#define IMX8ULP_CLK_LPIT1		2
+#define IMX8ULP_CLK_TPM4		3
+#define IMX8ULP_CLK_TPM5		4
+#define IMX8ULP_CLK_FLEXIO1		5
+#define IMX8ULP_CLK_I3C2		6
+#define IMX8ULP_CLK_LPI2C4		7
+#define IMX8ULP_CLK_LPI2C5		8
+#define IMX8ULP_CLK_LPUART4		9
+#define IMX8ULP_CLK_LPUART5		10
+#define IMX8ULP_CLK_LPSPI4		11
+#define IMX8ULP_CLK_LPSPI5		12
+#define IMX8ULP_CLK_DMA1_MP		13
+#define IMX8ULP_CLK_DMA1_CH0		14
+#define IMX8ULP_CLK_DMA1_CH1		15
+#define IMX8ULP_CLK_DMA1_CH2		16
+#define IMX8ULP_CLK_DMA1_CH3		17
+#define IMX8ULP_CLK_DMA1_CH4		18
+#define IMX8ULP_CLK_DMA1_CH5		19
+#define IMX8ULP_CLK_DMA1_CH6		20
+#define IMX8ULP_CLK_DMA1_CH7		21
+#define IMX8ULP_CLK_DMA1_CH8		22
+#define IMX8ULP_CLK_DMA1_CH9		23
+#define IMX8ULP_CLK_DMA1_CH10		24
+#define IMX8ULP_CLK_DMA1_CH11		25
+#define IMX8ULP_CLK_DMA1_CH12		26
+#define IMX8ULP_CLK_DMA1_CH13		27
+#define IMX8ULP_CLK_DMA1_CH14		28
+#define IMX8ULP_CLK_DMA1_CH15		29
+#define IMX8ULP_CLK_DMA1_CH16		30
+#define IMX8ULP_CLK_DMA1_CH17		31
+#define IMX8ULP_CLK_DMA1_CH18		32
+#define IMX8ULP_CLK_DMA1_CH19		33
+#define IMX8ULP_CLK_DMA1_CH20		34
+#define IMX8ULP_CLK_DMA1_CH21		35
+#define IMX8ULP_CLK_DMA1_CH22		36
+#define IMX8ULP_CLK_DMA1_CH23		37
+#define IMX8ULP_CLK_DMA1_CH24		38
+#define IMX8ULP_CLK_DMA1_CH25		39
+#define IMX8ULP_CLK_DMA1_CH26		40
+#define IMX8ULP_CLK_DMA1_CH27		41
+#define IMX8ULP_CLK_DMA1_CH28		42
+#define IMX8ULP_CLK_DMA1_CH29		43
+#define IMX8ULP_CLK_DMA1_CH30		44
+#define IMX8ULP_CLK_DMA1_CH31		45
+#define IMX8ULP_CLK_MU3_A		46
+#define IMX8ULP_CLK_MU0_B		47
+
+#define IMX8ULP_CLK_PCC3_END		48
+
+/* PCC4 */
+#define IMX8ULP_CLK_FLEXSPI2		0
+#define IMX8ULP_CLK_TPM6		1
+#define IMX8ULP_CLK_TPM7		2
+#define IMX8ULP_CLK_LPI2C6		3
+#define IMX8ULP_CLK_LPI2C7		4
+#define IMX8ULP_CLK_LPUART6		5
+#define IMX8ULP_CLK_LPUART7		6
+#define IMX8ULP_CLK_SAI4		7
+#define IMX8ULP_CLK_SAI5		8
+#define IMX8ULP_CLK_PCTLE		9
+#define IMX8ULP_CLK_PCTLF		10
+#define IMX8ULP_CLK_USDHC0		11
+#define IMX8ULP_CLK_USDHC1		12
+#define IMX8ULP_CLK_USDHC2		13
+#define IMX8ULP_CLK_USB0		14
+#define IMX8ULP_CLK_USB0_PHY		15
+#define IMX8ULP_CLK_USB1		16
+#define IMX8ULP_CLK_USB1_PHY		17
+#define IMX8ULP_CLK_USB_XBAR		18
+#define IMX8ULP_CLK_ENET		19
+#define IMX8ULP_CLK_SFA1		20
+#define IMX8ULP_CLK_RGPIOE		21
+#define IMX8ULP_CLK_RGPIOF		22
+
+#define IMX8ULP_CLK_PCC4_END		23
+
+/* PCC5 */
+#define IMX8ULP_CLK_TPM8		0
+#define IMX8ULP_CLK_SAI6		1
+#define IMX8ULP_CLK_SAI7		2
+#define IMX8ULP_CLK_SPDIF		3
+#define IMX8ULP_CLK_ISI			4
+#define IMX8ULP_CLK_CSI_REGS 		5
+#define IMX8ULP_CLK_PCTLD		6
+#define IMX8ULP_CLK_CSI			7
+#define IMX8ULP_CLK_DSI			8
+#define IMX8ULP_CLK_WDOG5		9
+#define IMX8ULP_CLK_EPDC		10
+#define IMX8ULP_CLK_PXP			11
+#define IMX8ULP_CLK_SFA2		12
+#define IMX8ULP_CLK_GPU2D		13
+#define IMX8ULP_CLK_GPU3D		14
+#define IMX8ULP_CLK_DC_NANO		15
+#define IMX8ULP_CLK_CSI_CLK_UI 		16
+#define IMX8ULP_CLK_CSI_CLK_ESC		17
+#define IMX8ULP_CLK_RGPIOD		18
+#define IMX8ULP_CLK_DMA2_MP		19
+#define IMX8ULP_CLK_DMA2_CH0		20
+#define IMX8ULP_CLK_DMA2_CH1		21
+#define IMX8ULP_CLK_DMA2_CH2		22
+#define IMX8ULP_CLK_DMA2_CH3		23
+#define IMX8ULP_CLK_DMA2_CH4		24
+#define IMX8ULP_CLK_DMA2_CH5		25
+#define IMX8ULP_CLK_DMA2_CH6		26
+#define IMX8ULP_CLK_DMA2_CH7		27
+#define IMX8ULP_CLK_DMA2_CH8		28
+#define IMX8ULP_CLK_DMA2_CH9		29
+#define IMX8ULP_CLK_DMA2_CH10		30
+#define IMX8ULP_CLK_DMA2_CH11		31
+#define IMX8ULP_CLK_DMA2_CH12		32
+#define IMX8ULP_CLK_DMA2_CH13		33
+#define IMX8ULP_CLK_DMA2_CH14		34
+#define IMX8ULP_CLK_DMA2_CH15		35
+#define IMX8ULP_CLK_DMA2_CH16		36
+#define IMX8ULP_CLK_DMA2_CH17		37
+#define IMX8ULP_CLK_DMA2_CH18		38
+#define IMX8ULP_CLK_DMA2_CH19		39
+#define IMX8ULP_CLK_DMA2_CH20		40
+#define IMX8ULP_CLK_DMA2_CH21		41
+#define IMX8ULP_CLK_DMA2_CH22		42
+#define IMX8ULP_CLK_DMA2_CH23		43
+#define IMX8ULP_CLK_DMA2_CH24		44
+#define IMX8ULP_CLK_DMA2_CH25		45
+#define IMX8ULP_CLK_DMA2_CH26		46
+#define IMX8ULP_CLK_DMA2_CH27		47
+#define IMX8ULP_CLK_DMA2_CH28		48
+#define IMX8ULP_CLK_DMA2_CH29		49
+#define IMX8ULP_CLK_DMA2_CH30		50
+#define IMX8ULP_CLK_DMA2_CH31		51
+#define IMX8ULP_CLK_MU2_B		52
+#define IMX8ULP_CLK_MU3_B		53
+#define IMX8ULP_CLK_AVD_SIM		54
+#define IMX8ULP_CLK_DSI_TX_ESC		55
+
+#define IMX8ULP_CLK_PCC5_END		56
+
+#endif
diff --git a/include/dt-bindings/reset/imx8ulp-pcc-reset.h b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
new file mode 100644
index 000000000000..e99a4735c3c4
--- /dev/null
+++ b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef DT_BINDING_PCC_RESET_IMX8ULP_H
+#define DT_BINDING_PCC_RESET_IMX8ULP_H
+
+/* PCC3 */
+#define PCC3_WDOG3_SWRST	0
+#define PCC3_WDOG4_SWRST	1
+#define PCC3_LPIT1_SWRST	2
+#define PCC3_TPM4_SWRST		3
+#define PCC3_TPM5_SWRST		4
+#define PCC3_FLEXIO1_SWRST	5
+#define PCC3_I3C2_SWRST		6
+#define PCC3_LPI2C4_SWRST	7
+#define PCC3_LPI2C5_SWRST	8
+#define PCC3_LPUART4_SWRST	9
+#define PCC3_LPUART5_SWRST	10
+#define PCC3_LPSPI4_SWRST	11
+#define PCC3_LPSPI5_SWRST	12
+
+/* PCC4 */
+#define PCC4_FLEXSPI2_SWRST	0
+#define PCC4_TPM6_SWRST		1
+#define PCC4_TPM7_SWRST		2
+#define PCC4_LPI2C6_SWRST	3
+#define PCC4_LPI2C7_SWRST	4
+#define PCC4_LPUART6_SWRST	5
+#define PCC4_LPUART7_SWRST	6
+#define PCC4_SAI4_SWRST		7
+#define PCC4_SAI5_SWRST		8
+#define PCC4_USDHC0_SWRST	9
+#define PCC4_USDHC1_SWRST	10
+#define PCC4_USDHC2_SWRST	11
+#define PCC4_USB0_SWRST		12
+#define PCC4_USB0_PHY_SWRST	13
+#define PCC4_USB1_SWRST		14
+#define PCC4_USB1_PHY_SWRST	15
+#define PCC4_ENET_SWRST		16
+
+/* PCC5 */
+#define PCC5_TPM8_SWRST		0
+#define PCC5_SAI6_SWRST		1
+#define PCC5_SAI7_SWRST		2
+#define PCC5_SPDIF_SWRST	3
+#define PCC5_ISI_SWRST		4
+#define PCC5_CSI_REGS_SWRST	5
+#define PCC5_CSI_SWRST		6
+#define PCC5_DSI_SWRST		7
+#define PCC5_WDOG5_SWRST	8
+#define PCC5_EPDC_SWRST		9
+#define PCC5_PXP_SWRST		10
+#define PCC5_GPU2D_SWRST	11
+#define PCC5_GPU3D_SWRST	12
+#define PCC5_DC_NANO_SWRST	13
+
+#endif /*DT_BINDING_RESET_IMX8ULP_H */
-- 
2.26.2

Re: [PATCH 1/9] dt-bindings: clock: Add imx8ulp clock support

[Rob Herring]

On Mon, Jul 19, 2021 at 01:34:22PM +0800, Jacky Bai wrote:
> Add the clock dt-binding file for i.MX8ULP.
> 
> For pcc node, it will also be used as a reset controller,
> so add the '#reset-cells' property description and add the
> pcc reset IDs.
> 
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> ---
>  changes:
>   - Move this patch from dts patchset into this patchset
>   - Resolve Rob's comments

That's not all that helpful of a changelog. Assume I don't remember my 
comments, so give me a hint as to what part needs to be looked at again.

> ---
>  .../bindings/clock/imx8ulp-clock.yaml         | 128 +++++++++
>  include/dt-bindings/clock/imx8ulp-clock.h     | 262 ++++++++++++++++++
>  include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++++
>  3 files changed, 449 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
>  create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h
>  create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> new file mode 100644
> index 000000000000..9eb0c3c2a49d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> @@ -0,0 +1,128 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx8ulp-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8ULP Clock Control Module Binding
> +
> +maintainers:
> +  - Jacky Bai <ping.bai@nxp.com>
> +
> +description: |
> +  On i.MX8ULP, The clock sources generation, distribution and management is
> +  under the control of several CGCs & PCCs modules. The CGC modules generate
> +  and distribute clocks on the device. PCC modules control clock selection,
> +  optional division and clock gating mode for peripherals
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,imx8ulp-cgc1
> +      - fsl,imx8ulp-cgc2
> +      - fsl,imx8ulp-pcc3
> +      - fsl,imx8ulp-pcc4
> +      - fsl,imx8ulp-pcc5
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks: true
> +
> +  clock-names: true
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#clock-cells'
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8ulp-cgc1
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: rosc
> +            - description: sosc
> +            - description: frosc
> +            - description: lposc
> +
> +        clock-names:
> +          items:
> +            - const: rosc
> +            - const: sosc
> +            - const: frosc
> +            - const: lposc
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8ulp-cgc2
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: sosc
> +            - description: frosc
> +
> +        clock-names:
> +          items:
> +            - const: sosc
> +            - const: frosc
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8ulp-cgc1
> +              - fsl,imx8ulp-cgc2
> +    then:
> +      required:
> +        - clocks
> +        - clock-names
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8ulp-pcc3
> +              - fsl,imx8ulp-pcc4
> +              - fsl,imx8ulp-pcc5
> +    then:
> +      required:
> +        - '#reset-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock Control Module node:
> +  - |
> +    clock-controller@292c0000 {
> +        compatible = "fsl,imx8ulp-cgc1";
> +        reg = <0x292c0000 0x10000>;
> +        clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
> +        clock-names = "rosc", "sosc", "frosc", "lposc";
> +        #clock-cells = <1>;
> +    };
> +
> +  - |
> +    clock-controller@292d0000 {
> +        compatible = "fsl,imx8ulp-pcc3";
> +        reg = <0x292d0000 0x10000>;
> +        #clock-cells = <1>;
> +        #reset-cells = <1>;
> +    };
> diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h
> new file mode 100644
> index 000000000000..cb449c991643
> --- /dev/null
> +++ b/include/dt-bindings/clock/imx8ulp-clock.h
> @@ -0,0 +1,262 @@
> +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
> +/*
> + * Copyright 2021 NXP
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H
> +#define __DT_BINDINGS_CLOCK_IMX8ULP_H
> +
> +#define IMX8ULP_CLK_DUMMY			0
> +#define IMX8ULP_CLK_ROSC			1
> +#define IMX8ULP_CLK_FROSC			2
> +#define IMX8ULP_CLK_LPOSC			3
> +#define IMX8ULP_CLK_SOSC			4
> +
> +/* CGC1 */
> +#define IMX8ULP_CLK_SPLL2			5
> +#define IMX8ULP_CLK_SPLL3			6
> +#define IMX8ULP_CLK_A35_SEL			7
> +#define IMX8ULP_CLK_A35_DIV			8
> +#define IMX8ULP_CLK_SPLL2_PRE_SEL		9
> +#define IMX8ULP_CLK_SPLL3_PRE_SEL		10
> +#define IMX8ULP_CLK_SPLL3_PFD0			11
> +#define IMX8ULP_CLK_SPLL3_PFD1			12
> +#define IMX8ULP_CLK_SPLL3_PFD2			13
> +#define IMX8ULP_CLK_SPLL3_PFD3			14
> +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1		15
> +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2		16
> +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1		17
> +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2		18
> +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1		19
> +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2		20
> +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1		21
> +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2		22
> +#define IMX8ULP_CLK_NIC_SEL			23
> +#define IMX8ULP_CLK_NIC_AD_DIVPLAT		24
> +#define IMX8ULP_CLK_NIC_PER_DIVPLAT		25
> +#define IMX8ULP_CLK_XBAR_SEL			26
> +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT		27
> +#define IMX8ULP_CLK_XBAR_DIVBUS			28
> +#define IMX8ULP_CLK_XBAR_AD_SLOW		29
> +#define IMX8ULP_CLK_SOSC_DIV1			30
> +#define IMX8ULP_CLK_SOSC_DIV2			31
> +#define IMX8ULP_CLK_SOSC_DIV3			32
> +#define IMX8ULP_CLK_FROSC_DIV1			33
> +#define IMX8ULP_CLK_FROSC_DIV2			34
> +#define IMX8ULP_CLK_FROSC_DIV3			35
> +#define IMX8ULP_CLK_SPLL3_VCODIV		36
> +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE	37
> +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE	38
> +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE	39
> +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE	40
> +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE	41
> +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE	42
> +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE	43
> +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE	44
> +#define IMX8ULP_CLK_SOSC_DIV1_GATE		45
> +#define IMX8ULP_CLK_SOSC_DIV2_GATE		46
> +#define IMX8ULP_CLK_SOSC_DIV3_GATE		47
> +#define IMX8ULP_CLK_FROSC_DIV1_GATE		48
> +#define IMX8ULP_CLK_FROSC_DIV2_GATE		49
> +#define IMX8ULP_CLK_FROSC_DIV3_GATE		50
> +#define IMX8ULP_CLK_SAI4_SEL			51
> +#define IMX8ULP_CLK_SAI5_SEL			52
> +#define IMX8ULP_CLK_AUD_CLK1			53
> +#define IMX8ULP_CLK_ARM				54
> +#define IMX8ULP_CLK_ENET_TS_SEL			55
> +
> +#define IMX8ULP_CLK_CGC1_END			56
> +
> +/* CGC2 */
> +#define IMX8ULP_CLK_PLL4_PRE_SEL	0
> +#define IMX8ULP_CLK_PLL4		1
> +#define IMX8ULP_CLK_PLL4_VCODIV		2
> +#define IMX8ULP_CLK_DDR_SEL		3
> +#define IMX8ULP_CLK_DDR_DIV		4
> +#define IMX8ULP_CLK_LPAV_AXI_SEL	5
> +#define IMX8ULP_CLK_LPAV_AXI_DIV	6
> +#define IMX8ULP_CLK_LPAV_AHB_DIV	7
> +#define IMX8ULP_CLK_LPAV_BUS_DIV	8
> +#define IMX8ULP_CLK_PLL4_PFD0		9
> +#define IMX8ULP_CLK_PLL4_PFD1		10
> +#define IMX8ULP_CLK_PLL4_PFD2		11
> +#define IMX8ULP_CLK_PLL4_PFD3		12
> +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE	13
> +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE	14
> +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE	15
> +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE	16
> +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE	17
> +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE	18
> +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE	19
> +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE	20
> +#define IMX8ULP_CLK_PLL4_PFD0_DIV1	21
> +#define IMX8ULP_CLK_PLL4_PFD0_DIV2	22
> +#define IMX8ULP_CLK_PLL4_PFD1_DIV1	23
> +#define IMX8ULP_CLK_PLL4_PFD1_DIV2	24
> +#define IMX8ULP_CLK_PLL4_PFD2_DIV1	25
> +#define IMX8ULP_CLK_PLL4_PFD2_DIV2	26
> +#define IMX8ULP_CLK_PLL4_PFD3_DIV1	27
> +#define IMX8ULP_CLK_PLL4_PFD3_DIV2	28
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE	29
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE	30
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE	31
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV1	32
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV2	33
> +#define IMX8ULP_CLK_CGC2_SOSC_DIV3	34
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE	35
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE	36
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE	37
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV1	38
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV2	39
> +#define IMX8ULP_CLK_CGC2_FROSC_DIV3	40
> +#define IMX8ULP_CLK_AUD_CLK2		41
> +#define IMX8ULP_CLK_SAI6_SEL		42
> +#define IMX8ULP_CLK_SAI7_SEL		43
> +#define IMX8ULP_CLK_SPDIF_SEL		44
> +#define IMX8ULP_CLK_HIFI_SEL		45
> +#define IMX8ULP_CLK_HIFI_DIVCORE	46
> +#define IMX8ULP_CLK_HIFI_DIVPLAT	47
> +#define IMX8ULP_CLK_DSI_PHY_REF		48
> +
> +#define IMX8ULP_CLK_CGC2_END		49
> +
> +/* PCC3 */
> +#define IMX8ULP_CLK_WDOG3		0
> +#define IMX8ULP_CLK_WDOG4		1
> +#define IMX8ULP_CLK_LPIT1		2
> +#define IMX8ULP_CLK_TPM4		3
> +#define IMX8ULP_CLK_TPM5		4
> +#define IMX8ULP_CLK_FLEXIO1		5
> +#define IMX8ULP_CLK_I3C2		6
> +#define IMX8ULP_CLK_LPI2C4		7
> +#define IMX8ULP_CLK_LPI2C5		8
> +#define IMX8ULP_CLK_LPUART4		9
> +#define IMX8ULP_CLK_LPUART5		10
> +#define IMX8ULP_CLK_LPSPI4		11
> +#define IMX8ULP_CLK_LPSPI5		12
> +#define IMX8ULP_CLK_DMA1_MP		13
> +#define IMX8ULP_CLK_DMA1_CH0		14
> +#define IMX8ULP_CLK_DMA1_CH1		15
> +#define IMX8ULP_CLK_DMA1_CH2		16
> +#define IMX8ULP_CLK_DMA1_CH3		17
> +#define IMX8ULP_CLK_DMA1_CH4		18
> +#define IMX8ULP_CLK_DMA1_CH5		19
> +#define IMX8ULP_CLK_DMA1_CH6		20
> +#define IMX8ULP_CLK_DMA1_CH7		21
> +#define IMX8ULP_CLK_DMA1_CH8		22
> +#define IMX8ULP_CLK_DMA1_CH9		23
> +#define IMX8ULP_CLK_DMA1_CH10		24
> +#define IMX8ULP_CLK_DMA1_CH11		25
> +#define IMX8ULP_CLK_DMA1_CH12		26
> +#define IMX8ULP_CLK_DMA1_CH13		27
> +#define IMX8ULP_CLK_DMA1_CH14		28
> +#define IMX8ULP_CLK_DMA1_CH15		29
> +#define IMX8ULP_CLK_DMA1_CH16		30
> +#define IMX8ULP_CLK_DMA1_CH17		31
> +#define IMX8ULP_CLK_DMA1_CH18		32
> +#define IMX8ULP_CLK_DMA1_CH19		33
> +#define IMX8ULP_CLK_DMA1_CH20		34
> +#define IMX8ULP_CLK_DMA1_CH21		35
> +#define IMX8ULP_CLK_DMA1_CH22		36
> +#define IMX8ULP_CLK_DMA1_CH23		37
> +#define IMX8ULP_CLK_DMA1_CH24		38
> +#define IMX8ULP_CLK_DMA1_CH25		39
> +#define IMX8ULP_CLK_DMA1_CH26		40
> +#define IMX8ULP_CLK_DMA1_CH27		41
> +#define IMX8ULP_CLK_DMA1_CH28		42
> +#define IMX8ULP_CLK_DMA1_CH29		43
> +#define IMX8ULP_CLK_DMA1_CH30		44
> +#define IMX8ULP_CLK_DMA1_CH31		45
> +#define IMX8ULP_CLK_MU3_A		46
> +#define IMX8ULP_CLK_MU0_B		47
> +
> +#define IMX8ULP_CLK_PCC3_END		48
> +
> +/* PCC4 */
> +#define IMX8ULP_CLK_FLEXSPI2		0
> +#define IMX8ULP_CLK_TPM6		1
> +#define IMX8ULP_CLK_TPM7		2
> +#define IMX8ULP_CLK_LPI2C6		3
> +#define IMX8ULP_CLK_LPI2C7		4
> +#define IMX8ULP_CLK_LPUART6		5
> +#define IMX8ULP_CLK_LPUART7		6
> +#define IMX8ULP_CLK_SAI4		7
> +#define IMX8ULP_CLK_SAI5		8
> +#define IMX8ULP_CLK_PCTLE		9
> +#define IMX8ULP_CLK_PCTLF		10
> +#define IMX8ULP_CLK_USDHC0		11
> +#define IMX8ULP_CLK_USDHC1		12
> +#define IMX8ULP_CLK_USDHC2		13
> +#define IMX8ULP_CLK_USB0		14
> +#define IMX8ULP_CLK_USB0_PHY		15
> +#define IMX8ULP_CLK_USB1		16
> +#define IMX8ULP_CLK_USB1_PHY		17
> +#define IMX8ULP_CLK_USB_XBAR		18
> +#define IMX8ULP_CLK_ENET		19
> +#define IMX8ULP_CLK_SFA1		20
> +#define IMX8ULP_CLK_RGPIOE		21
> +#define IMX8ULP_CLK_RGPIOF		22
> +
> +#define IMX8ULP_CLK_PCC4_END		23
> +
> +/* PCC5 */
> +#define IMX8ULP_CLK_TPM8		0
> +#define IMX8ULP_CLK_SAI6		1
> +#define IMX8ULP_CLK_SAI7		2
> +#define IMX8ULP_CLK_SPDIF		3
> +#define IMX8ULP_CLK_ISI			4
> +#define IMX8ULP_CLK_CSI_REGS 		5
> +#define IMX8ULP_CLK_PCTLD		6
> +#define IMX8ULP_CLK_CSI			7
> +#define IMX8ULP_CLK_DSI			8
> +#define IMX8ULP_CLK_WDOG5		9
> +#define IMX8ULP_CLK_EPDC		10
> +#define IMX8ULP_CLK_PXP			11
> +#define IMX8ULP_CLK_SFA2		12
> +#define IMX8ULP_CLK_GPU2D		13
> +#define IMX8ULP_CLK_GPU3D		14
> +#define IMX8ULP_CLK_DC_NANO		15
> +#define IMX8ULP_CLK_CSI_CLK_UI 		16
> +#define IMX8ULP_CLK_CSI_CLK_ESC		17
> +#define IMX8ULP_CLK_RGPIOD		18
> +#define IMX8ULP_CLK_DMA2_MP		19
> +#define IMX8ULP_CLK_DMA2_CH0		20
> +#define IMX8ULP_CLK_DMA2_CH1		21
> +#define IMX8ULP_CLK_DMA2_CH2		22
> +#define IMX8ULP_CLK_DMA2_CH3		23
> +#define IMX8ULP_CLK_DMA2_CH4		24
> +#define IMX8ULP_CLK_DMA2_CH5		25
> +#define IMX8ULP_CLK_DMA2_CH6		26
> +#define IMX8ULP_CLK_DMA2_CH7		27
> +#define IMX8ULP_CLK_DMA2_CH8		28
> +#define IMX8ULP_CLK_DMA2_CH9		29
> +#define IMX8ULP_CLK_DMA2_CH10		30
> +#define IMX8ULP_CLK_DMA2_CH11		31
> +#define IMX8ULP_CLK_DMA2_CH12		32
> +#define IMX8ULP_CLK_DMA2_CH13		33
> +#define IMX8ULP_CLK_DMA2_CH14		34
> +#define IMX8ULP_CLK_DMA2_CH15		35
> +#define IMX8ULP_CLK_DMA2_CH16		36
> +#define IMX8ULP_CLK_DMA2_CH17		37
> +#define IMX8ULP_CLK_DMA2_CH18		38
> +#define IMX8ULP_CLK_DMA2_CH19		39
> +#define IMX8ULP_CLK_DMA2_CH20		40
> +#define IMX8ULP_CLK_DMA2_CH21		41
> +#define IMX8ULP_CLK_DMA2_CH22		42
> +#define IMX8ULP_CLK_DMA2_CH23		43
> +#define IMX8ULP_CLK_DMA2_CH24		44
> +#define IMX8ULP_CLK_DMA2_CH25		45
> +#define IMX8ULP_CLK_DMA2_CH26		46
> +#define IMX8ULP_CLK_DMA2_CH27		47
> +#define IMX8ULP_CLK_DMA2_CH28		48
> +#define IMX8ULP_CLK_DMA2_CH29		49
> +#define IMX8ULP_CLK_DMA2_CH30		50
> +#define IMX8ULP_CLK_DMA2_CH31		51
> +#define IMX8ULP_CLK_MU2_B		52
> +#define IMX8ULP_CLK_MU3_B		53
> +#define IMX8ULP_CLK_AVD_SIM		54
> +#define IMX8ULP_CLK_DSI_TX_ESC		55
> +
> +#define IMX8ULP_CLK_PCC5_END		56
> +
> +#endif
> diff --git a/include/dt-bindings/reset/imx8ulp-pcc-reset.h b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
> new file mode 100644
> index 000000000000..e99a4735c3c4
> --- /dev/null
> +++ b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */

Dual license needed here too.

RE: [PATCH 1/9] dt-bindings: clock: Add imx8ulp clock support

[Jacky Bai]

> Subject: Re: [PATCH 1/9] dt-bindings: clock: Add imx8ulp clock support
> 
> On Mon, Jul 19, 2021 at 01:34:22PM +0800, Jacky Bai wrote:
> > Add the clock dt-binding file for i.MX8ULP.
> >
> > For pcc node, it will also be used as a reset controller, so add the
> > '#reset-cells' property description and add the pcc reset IDs.
> >
> > Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> > ---
> >  changes:
> >   - Move this patch from dts patchset into this patchset
> >   - Resolve Rob's comments
> 
> That's not all that helpful of a changelog. Assume I don't remember my
> comments, so give me a hint as to what part needs to be looked at again.
> 

I add the constrains for the clocks and clock-names property. previously, it is just free format text.
After rethinking, it seems these two properties are redundant. I will remove them in V2 if it is really
useless.

Thx.

BR
Jacky Bai
> > ---
> >  .../bindings/clock/imx8ulp-clock.yaml         | 128 +++++++++
> >  include/dt-bindings/clock/imx8ulp-clock.h     | 262
> ++++++++++++++++++
> >  include/dt-bindings/reset/imx8ulp-pcc-reset.h |  59 ++++
> >  3 files changed, 449 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> >  create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h
> >  create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> > b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> > new file mode 100644
> > index 000000000000..9eb0c3c2a49d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml
> > @@ -0,0 +1,128 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fschemas%2Fclock%2Fimx8ulp-clock.yaml%23&amp;data=04
> %7C01
> >
> +%7Cping.bai%40nxp.com%7C4aa1ea18a39d44f123fa08d952c26d79%7C686
> ea1d3bc
> >
> +2b4c6fa92cd99c5c301635%7C0%7C0%7C637631817284312948%7CUnkno
> wn%7CTWFpb
> >
> +GZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVC
> I6Mn
> >
> +0%3D%7C1000&amp;sdata=fKKKLWkhH5gp8M9yWLDVxUxZyUCQOlpnny9J
> NCgiOxc%3D&
> > +amp;reserved=0
> > +$schema:
> > +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&amp;data=04%7C01%7Cpi
> ng.bai%
> >
> +40nxp.com%7C4aa1ea18a39d44f123fa08d952c26d79%7C686ea1d3bc2b4c
> 6fa92cd9
> >
> +9c5c301635%7C0%7C0%7C637631817284312948%7CUnknown%7CTWFpb
> GZsb3d8eyJWI
> >
> +joiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7
> C1000&
> >
> +amp;sdata=lDWtyw9fl0jZB%2FmQU4CFjYM%2Fz%2FbTqWC%2BD8ncfr1WF
> dg%3D&amp;
> > +reserved=0
> > +
> > +title: NXP i.MX8ULP Clock Control Module Binding
> > +
> > +maintainers:
> > +  - Jacky Bai <ping.bai@nxp.com>
> > +
> > +description: |
> > +  On i.MX8ULP, The clock sources generation, distribution and
> > +management is
> > +  under the control of several CGCs & PCCs modules. The CGC modules
> > +generate
> > +  and distribute clocks on the device. PCC modules control clock
> > +selection,
> > +  optional division and clock gating mode for peripherals
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - fsl,imx8ulp-cgc1
> > +      - fsl,imx8ulp-cgc2
> > +      - fsl,imx8ulp-pcc3
> > +      - fsl,imx8ulp-pcc4
> > +      - fsl,imx8ulp-pcc5
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks: true
> > +
> > +  clock-names: true
> > +
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  '#reset-cells':
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - '#clock-cells'
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx8ulp-cgc1
> > +    then:
> > +      properties:
> > +        clocks:
> > +          items:
> > +            - description: rosc
> > +            - description: sosc
> > +            - description: frosc
> > +            - description: lposc
> > +
> > +        clock-names:
> > +          items:
> > +            - const: rosc
> > +            - const: sosc
> > +            - const: frosc
> > +            - const: lposc
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx8ulp-cgc2
> > +    then:
> > +      properties:
> > +        clocks:
> > +          items:
> > +            - description: sosc
> > +            - description: frosc
> > +
> > +        clock-names:
> > +          items:
> > +            - const: sosc
> > +            - const: frosc
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx8ulp-cgc1
> > +              - fsl,imx8ulp-cgc2
> > +    then:
> > +      required:
> > +        - clocks
> > +        - clock-names
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx8ulp-pcc3
> > +              - fsl,imx8ulp-pcc4
> > +              - fsl,imx8ulp-pcc5
> > +    then:
> > +      required:
> > +        - '#reset-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  # Clock Control Module node:
> > +  - |
> > +    clock-controller@292c0000 {
> > +        compatible = "fsl,imx8ulp-cgc1";
> > +        reg = <0x292c0000 0x10000>;
> > +        clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
> > +        clock-names = "rosc", "sosc", "frosc", "lposc";
> > +        #clock-cells = <1>;
> > +    };
> > +
> > +  - |
> > +    clock-controller@292d0000 {
> > +        compatible = "fsl,imx8ulp-pcc3";
> > +        reg = <0x292d0000 0x10000>;
> > +        #clock-cells = <1>;
> > +        #reset-cells = <1>;
> > +    };
> > diff --git a/include/dt-bindings/clock/imx8ulp-clock.h
> > b/include/dt-bindings/clock/imx8ulp-clock.h
> > new file mode 100644
> > index 000000000000..cb449c991643
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/imx8ulp-clock.h
> > @@ -0,0 +1,262 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
> > +/*
> > + * Copyright 2021 NXP
> > + */
> > +
> > +#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H #define
> > +__DT_BINDINGS_CLOCK_IMX8ULP_H
> > +
> > +#define IMX8ULP_CLK_DUMMY			0
> > +#define IMX8ULP_CLK_ROSC			1
> > +#define IMX8ULP_CLK_FROSC			2
> > +#define IMX8ULP_CLK_LPOSC			3
> > +#define IMX8ULP_CLK_SOSC			4
> > +
> > +/* CGC1 */
> > +#define IMX8ULP_CLK_SPLL2			5
> > +#define IMX8ULP_CLK_SPLL3			6
> > +#define IMX8ULP_CLK_A35_SEL			7
> > +#define IMX8ULP_CLK_A35_DIV			8
> > +#define IMX8ULP_CLK_SPLL2_PRE_SEL		9
> > +#define IMX8ULP_CLK_SPLL3_PRE_SEL		10
> > +#define IMX8ULP_CLK_SPLL3_PFD0			11
> > +#define IMX8ULP_CLK_SPLL3_PFD1			12
> > +#define IMX8ULP_CLK_SPLL3_PFD2			13
> > +#define IMX8ULP_CLK_SPLL3_PFD3			14
> > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1		15
> > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2		16
> > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1		17
> > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2		18
> > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1		19
> > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2		20
> > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1		21
> > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2		22
> > +#define IMX8ULP_CLK_NIC_SEL			23
> > +#define IMX8ULP_CLK_NIC_AD_DIVPLAT		24
> > +#define IMX8ULP_CLK_NIC_PER_DIVPLAT		25
> > +#define IMX8ULP_CLK_XBAR_SEL			26
> > +#define IMX8ULP_CLK_XBAR_AD_DIVPLAT		27
> > +#define IMX8ULP_CLK_XBAR_DIVBUS			28
> > +#define IMX8ULP_CLK_XBAR_AD_SLOW		29
> > +#define IMX8ULP_CLK_SOSC_DIV1			30
> > +#define IMX8ULP_CLK_SOSC_DIV2			31
> > +#define IMX8ULP_CLK_SOSC_DIV3			32
> > +#define IMX8ULP_CLK_FROSC_DIV1			33
> > +#define IMX8ULP_CLK_FROSC_DIV2			34
> > +#define IMX8ULP_CLK_FROSC_DIV3			35
> > +#define IMX8ULP_CLK_SPLL3_VCODIV		36
> > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE	37
> > +#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE	38
> > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE	39
> > +#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE	40
> > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE	41
> > +#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE	42
> > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE	43
> > +#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE	44
> > +#define IMX8ULP_CLK_SOSC_DIV1_GATE		45
> > +#define IMX8ULP_CLK_SOSC_DIV2_GATE		46
> > +#define IMX8ULP_CLK_SOSC_DIV3_GATE		47
> > +#define IMX8ULP_CLK_FROSC_DIV1_GATE		48
> > +#define IMX8ULP_CLK_FROSC_DIV2_GATE		49
> > +#define IMX8ULP_CLK_FROSC_DIV3_GATE		50
> > +#define IMX8ULP_CLK_SAI4_SEL			51
> > +#define IMX8ULP_CLK_SAI5_SEL			52
> > +#define IMX8ULP_CLK_AUD_CLK1			53
> > +#define IMX8ULP_CLK_ARM				54
> > +#define IMX8ULP_CLK_ENET_TS_SEL			55
> > +
> > +#define IMX8ULP_CLK_CGC1_END			56
> > +
> > +/* CGC2 */
> > +#define IMX8ULP_CLK_PLL4_PRE_SEL	0
> > +#define IMX8ULP_CLK_PLL4		1
> > +#define IMX8ULP_CLK_PLL4_VCODIV		2
> > +#define IMX8ULP_CLK_DDR_SEL		3
> > +#define IMX8ULP_CLK_DDR_DIV		4
> > +#define IMX8ULP_CLK_LPAV_AXI_SEL	5
> > +#define IMX8ULP_CLK_LPAV_AXI_DIV	6
> > +#define IMX8ULP_CLK_LPAV_AHB_DIV	7
> > +#define IMX8ULP_CLK_LPAV_BUS_DIV	8
> > +#define IMX8ULP_CLK_PLL4_PFD0		9
> > +#define IMX8ULP_CLK_PLL4_PFD1		10
> > +#define IMX8ULP_CLK_PLL4_PFD2		11
> > +#define IMX8ULP_CLK_PLL4_PFD3		12
> > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE	13
> > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE	14
> > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE	15
> > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE	16
> > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE	17
> > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE	18
> > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE	19
> > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE	20
> > +#define IMX8ULP_CLK_PLL4_PFD0_DIV1	21
> > +#define IMX8ULP_CLK_PLL4_PFD0_DIV2	22
> > +#define IMX8ULP_CLK_PLL4_PFD1_DIV1	23
> > +#define IMX8ULP_CLK_PLL4_PFD1_DIV2	24
> > +#define IMX8ULP_CLK_PLL4_PFD2_DIV1	25
> > +#define IMX8ULP_CLK_PLL4_PFD2_DIV2	26
> > +#define IMX8ULP_CLK_PLL4_PFD3_DIV1	27
> > +#define IMX8ULP_CLK_PLL4_PFD3_DIV2	28
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE	29
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE	30
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE	31
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV1	32
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV2	33
> > +#define IMX8ULP_CLK_CGC2_SOSC_DIV3	34
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE	35
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE	36
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE	37
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV1	38
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV2	39
> > +#define IMX8ULP_CLK_CGC2_FROSC_DIV3	40
> > +#define IMX8ULP_CLK_AUD_CLK2		41
> > +#define IMX8ULP_CLK_SAI6_SEL		42
> > +#define IMX8ULP_CLK_SAI7_SEL		43
> > +#define IMX8ULP_CLK_SPDIF_SEL		44
> > +#define IMX8ULP_CLK_HIFI_SEL		45
> > +#define IMX8ULP_CLK_HIFI_DIVCORE	46
> > +#define IMX8ULP_CLK_HIFI_DIVPLAT	47
> > +#define IMX8ULP_CLK_DSI_PHY_REF		48
> > +
> > +#define IMX8ULP_CLK_CGC2_END		49
> > +
> > +/* PCC3 */
> > +#define IMX8ULP_CLK_WDOG3		0
> > +#define IMX8ULP_CLK_WDOG4		1
> > +#define IMX8ULP_CLK_LPIT1		2
> > +#define IMX8ULP_CLK_TPM4		3
> > +#define IMX8ULP_CLK_TPM5		4
> > +#define IMX8ULP_CLK_FLEXIO1		5
> > +#define IMX8ULP_CLK_I3C2		6
> > +#define IMX8ULP_CLK_LPI2C4		7
> > +#define IMX8ULP_CLK_LPI2C5		8
> > +#define IMX8ULP_CLK_LPUART4		9
> > +#define IMX8ULP_CLK_LPUART5		10
> > +#define IMX8ULP_CLK_LPSPI4		11
> > +#define IMX8ULP_CLK_LPSPI5		12
> > +#define IMX8ULP_CLK_DMA1_MP		13
> > +#define IMX8ULP_CLK_DMA1_CH0		14
> > +#define IMX8ULP_CLK_DMA1_CH1		15
> > +#define IMX8ULP_CLK_DMA1_CH2		16
> > +#define IMX8ULP_CLK_DMA1_CH3		17
> > +#define IMX8ULP_CLK_DMA1_CH4		18
> > +#define IMX8ULP_CLK_DMA1_CH5		19
> > +#define IMX8ULP_CLK_DMA1_CH6		20
> > +#define IMX8ULP_CLK_DMA1_CH7		21
> > +#define IMX8ULP_CLK_DMA1_CH8		22
> > +#define IMX8ULP_CLK_DMA1_CH9		23
> > +#define IMX8ULP_CLK_DMA1_CH10		24
> > +#define IMX8ULP_CLK_DMA1_CH11		25
> > +#define IMX8ULP_CLK_DMA1_CH12		26
> > +#define IMX8ULP_CLK_DMA1_CH13		27
> > +#define IMX8ULP_CLK_DMA1_CH14		28
> > +#define IMX8ULP_CLK_DMA1_CH15		29
> > +#define IMX8ULP_CLK_DMA1_CH16		30
> > +#define IMX8ULP_CLK_DMA1_CH17		31
> > +#define IMX8ULP_CLK_DMA1_CH18		32
> > +#define IMX8ULP_CLK_DMA1_CH19		33
> > +#define IMX8ULP_CLK_DMA1_CH20		34
> > +#define IMX8ULP_CLK_DMA1_CH21		35
> > +#define IMX8ULP_CLK_DMA1_CH22		36
> > +#define IMX8ULP_CLK_DMA1_CH23		37
> > +#define IMX8ULP_CLK_DMA1_CH24		38
> > +#define IMX8ULP_CLK_DMA1_CH25		39
> > +#define IMX8ULP_CLK_DMA1_CH26		40
> > +#define IMX8ULP_CLK_DMA1_CH27		41
> > +#define IMX8ULP_CLK_DMA1_CH28		42
> > +#define IMX8ULP_CLK_DMA1_CH29		43
> > +#define IMX8ULP_CLK_DMA1_CH30		44
> > +#define IMX8ULP_CLK_DMA1_CH31		45
> > +#define IMX8ULP_CLK_MU3_A		46
> > +#define IMX8ULP_CLK_MU0_B		47
> > +
> > +#define IMX8ULP_CLK_PCC3_END		48
> > +
> > +/* PCC4 */
> > +#define IMX8ULP_CLK_FLEXSPI2		0
> > +#define IMX8ULP_CLK_TPM6		1
> > +#define IMX8ULP_CLK_TPM7		2
> > +#define IMX8ULP_CLK_LPI2C6		3
> > +#define IMX8ULP_CLK_LPI2C7		4
> > +#define IMX8ULP_CLK_LPUART6		5
> > +#define IMX8ULP_CLK_LPUART7		6
> > +#define IMX8ULP_CLK_SAI4		7
> > +#define IMX8ULP_CLK_SAI5		8
> > +#define IMX8ULP_CLK_PCTLE		9
> > +#define IMX8ULP_CLK_PCTLF		10
> > +#define IMX8ULP_CLK_USDHC0		11
> > +#define IMX8ULP_CLK_USDHC1		12
> > +#define IMX8ULP_CLK_USDHC2		13
> > +#define IMX8ULP_CLK_USB0		14
> > +#define IMX8ULP_CLK_USB0_PHY		15
> > +#define IMX8ULP_CLK_USB1		16
> > +#define IMX8ULP_CLK_USB1_PHY		17
> > +#define IMX8ULP_CLK_USB_XBAR		18
> > +#define IMX8ULP_CLK_ENET		19
> > +#define IMX8ULP_CLK_SFA1		20
> > +#define IMX8ULP_CLK_RGPIOE		21
> > +#define IMX8ULP_CLK_RGPIOF		22
> > +
> > +#define IMX8ULP_CLK_PCC4_END		23
> > +
> > +/* PCC5 */
> > +#define IMX8ULP_CLK_TPM8		0
> > +#define IMX8ULP_CLK_SAI6		1
> > +#define IMX8ULP_CLK_SAI7		2
> > +#define IMX8ULP_CLK_SPDIF		3
> > +#define IMX8ULP_CLK_ISI			4
> > +#define IMX8ULP_CLK_CSI_REGS 		5
> > +#define IMX8ULP_CLK_PCTLD		6
> > +#define IMX8ULP_CLK_CSI			7
> > +#define IMX8ULP_CLK_DSI			8
> > +#define IMX8ULP_CLK_WDOG5		9
> > +#define IMX8ULP_CLK_EPDC		10
> > +#define IMX8ULP_CLK_PXP			11
> > +#define IMX8ULP_CLK_SFA2		12
> > +#define IMX8ULP_CLK_GPU2D		13
> > +#define IMX8ULP_CLK_GPU3D		14
> > +#define IMX8ULP_CLK_DC_NANO		15
> > +#define IMX8ULP_CLK_CSI_CLK_UI 		16
> > +#define IMX8ULP_CLK_CSI_CLK_ESC		17
> > +#define IMX8ULP_CLK_RGPIOD		18
> > +#define IMX8ULP_CLK_DMA2_MP		19
> > +#define IMX8ULP_CLK_DMA2_CH0		20
> > +#define IMX8ULP_CLK_DMA2_CH1		21
> > +#define IMX8ULP_CLK_DMA2_CH2		22
> > +#define IMX8ULP_CLK_DMA2_CH3		23
> > +#define IMX8ULP_CLK_DMA2_CH4		24
> > +#define IMX8ULP_CLK_DMA2_CH5		25
> > +#define IMX8ULP_CLK_DMA2_CH6		26
> > +#define IMX8ULP_CLK_DMA2_CH7		27
> > +#define IMX8ULP_CLK_DMA2_CH8		28
> > +#define IMX8ULP_CLK_DMA2_CH9		29
> > +#define IMX8ULP_CLK_DMA2_CH10		30
> > +#define IMX8ULP_CLK_DMA2_CH11		31
> > +#define IMX8ULP_CLK_DMA2_CH12		32
> > +#define IMX8ULP_CLK_DMA2_CH13		33
> > +#define IMX8ULP_CLK_DMA2_CH14		34
> > +#define IMX8ULP_CLK_DMA2_CH15		35
> > +#define IMX8ULP_CLK_DMA2_CH16		36
> > +#define IMX8ULP_CLK_DMA2_CH17		37
> > +#define IMX8ULP_CLK_DMA2_CH18		38
> > +#define IMX8ULP_CLK_DMA2_CH19		39
> > +#define IMX8ULP_CLK_DMA2_CH20		40
> > +#define IMX8ULP_CLK_DMA2_CH21		41
> > +#define IMX8ULP_CLK_DMA2_CH22		42
> > +#define IMX8ULP_CLK_DMA2_CH23		43
> > +#define IMX8ULP_CLK_DMA2_CH24		44
> > +#define IMX8ULP_CLK_DMA2_CH25		45
> > +#define IMX8ULP_CLK_DMA2_CH26		46
> > +#define IMX8ULP_CLK_DMA2_CH27		47
> > +#define IMX8ULP_CLK_DMA2_CH28		48
> > +#define IMX8ULP_CLK_DMA2_CH29		49
> > +#define IMX8ULP_CLK_DMA2_CH30		50
> > +#define IMX8ULP_CLK_DMA2_CH31		51
> > +#define IMX8ULP_CLK_MU2_B		52
> > +#define IMX8ULP_CLK_MU3_B		53
> > +#define IMX8ULP_CLK_AVD_SIM		54
> > +#define IMX8ULP_CLK_DSI_TX_ESC		55
> > +
> > +#define IMX8ULP_CLK_PCC5_END		56
> > +
> > +#endif
> > diff --git a/include/dt-bindings/reset/imx8ulp-pcc-reset.h
> > b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
> > new file mode 100644
> > index 000000000000..e99a4735c3c4
> > --- /dev/null
> > +++ b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
> > @@ -0,0 +1,59 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> 
> Dual license needed here too.

[PATCH 2/9] clk: imx: Update the pllv4 to support imx8ulp

[Jacky Bai]

The PLLs used on i.MX8ULP is mostly the same as on i.MX7ULP,
except the PLL register offset is changed. Change the PLLv4
driver for code reuse on i.MX7ULP and i.MX8ULP.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/clk-imx7ulp.c |  4 ++--
 drivers/clk/imx/clk-pllv4.c   | 34 +++++++++++++++++++++++++---------
 drivers/clk/imx/clk.h         |  9 +++++++--
 3 files changed, 34 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 779e09105da7..ba50d6db8097 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -78,8 +78,8 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	hws[IMX7ULP_CLK_SPLL_PRE_DIV]	= imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608,	8,	3,	CLK_SET_RATE_GATE);
 
 	/*						name	 parent_name	 base */
-	hws[IMX7ULP_CLK_APLL]		= imx_clk_hw_pllv4("apll",  "apll_pre_div", base + 0x500);
-	hws[IMX7ULP_CLK_SPLL]		= imx_clk_hw_pllv4("spll",  "spll_pre_div", base + 0x600);
+	hws[IMX7ULP_CLK_APLL]		= imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "apll",  "apll_pre_div", base + 0x500);
+	hws[IMX7ULP_CLK_SPLL]		= imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "spll",  "spll_pre_div", base + 0x600);
 
 	/* APLL PFDs */
 	hws[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_hw_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
diff --git a/drivers/clk/imx/clk-pllv4.c b/drivers/clk/imx/clk-pllv4.c
index 8ec703f27417..3c750ccbee25 100644
--- a/drivers/clk/imx/clk-pllv4.c
+++ b/drivers/clk/imx/clk-pllv4.c
@@ -23,14 +23,17 @@
 
 /* PLL Configuration Register (xPLLCFG) */
 #define PLL_CFG_OFFSET		0x08
+#define IMX8ULP_PLL_CFG_OFFSET	0x10
 #define BP_PLL_MULT		16
 #define BM_PLL_MULT		(0x7f << 16)
 
 /* PLL Numerator Register (xPLLNUM) */
 #define PLL_NUM_OFFSET		0x10
+#define IMX8ULP_PLL_NUM_OFFSET	0x1c
 
 /* PLL Denominator Register (xPLLDENOM) */
 #define PLL_DENOM_OFFSET	0x14
+#define IMX8ULP_PLL_DENOM_OFFSET	0x18
 
 #define MAX_MFD			0x3fffffff
 #define DEFAULT_MFD		1000000
@@ -38,6 +41,9 @@
 struct clk_pllv4 {
 	struct clk_hw	hw;
 	void __iomem	*base;
+	u32		cfg_offset;
+	u32		num_offset;
+	u32		denom_offset;
 };
 
 /* Valid PLL MULT Table */
@@ -72,12 +78,12 @@ static unsigned long clk_pllv4_recalc_rate(struct clk_hw *hw,
 	u32 mult, mfn, mfd;
 	u64 temp64;
 
-	mult = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	mult = readl_relaxed(pll->base + pll->cfg_offset);
 	mult &= BM_PLL_MULT;
 	mult >>= BP_PLL_MULT;
 
-	mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
-	mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+	mfn = readl_relaxed(pll->base + pll->num_offset);
+	mfd = readl_relaxed(pll->base + pll->denom_offset);
 	temp64 = parent_rate;
 	temp64 *= mfn;
 	do_div(temp64, mfd);
@@ -165,13 +171,13 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
 	do_div(temp64, parent_rate);
 	mfn = temp64;
 
-	val = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	val = readl_relaxed(pll->base + pll->cfg_offset);
 	val &= ~BM_PLL_MULT;
 	val |= mult << BP_PLL_MULT;
-	writel_relaxed(val, pll->base + PLL_CFG_OFFSET);
+	writel_relaxed(val, pll->base + pll->cfg_offset);
 
-	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
-	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+	writel_relaxed(mfn, pll->base + pll->num_offset);
+	writel_relaxed(mfd, pll->base + pll->denom_offset);
 
 	return 0;
 }
@@ -207,8 +213,8 @@ static const struct clk_ops clk_pllv4_ops = {
 	.is_prepared	= clk_pllv4_is_prepared,
 };
 
-struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
-			  void __iomem *base)
+struct clk_hw *imx_clk_hw_pllv4(enum imx_pllv4_type type, const char *name,
+		 const char *parent_name, void __iomem *base)
 {
 	struct clk_pllv4 *pll;
 	struct clk_hw *hw;
@@ -221,6 +227,16 @@ struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
 
 	pll->base = base;
 
+	if (type == IMX_PLLV4_IMX8ULP) {
+		pll->cfg_offset = IMX8ULP_PLL_CFG_OFFSET;
+		pll->num_offset = IMX8ULP_PLL_NUM_OFFSET;
+		pll->denom_offset = IMX8ULP_PLL_DENOM_OFFSET;
+	} else {
+		pll->cfg_offset = PLL_CFG_OFFSET;
+		pll->num_offset = PLL_NUM_OFFSET;
+		pll->denom_offset = PLL_DENOM_OFFSET;
+	}
+
 	init.name = name;
 	init.ops = &clk_pllv4_ops;
 	init.parent_names = &parent_name;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 7571603bee23..964f5cddc7aa 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -42,6 +42,11 @@ enum imx_pll14xx_type {
 	PLL_1443X,
 };
 
+enum imx_pllv4_type {
+	IMX_PLLV4_IMX7ULP,
+	IMX_PLLV4_IMX8ULP,
+};
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 struct imx_pll14xx_rate_table {
 	unsigned int rate;
@@ -191,8 +196,8 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
 		.kdiv	=	(_k),			\
 	}
 
-struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
-			     void __iomem *base);
+struct clk_hw *imx_clk_hw_pllv4(enum imx_pllv4_type type, const char *name,
+		const char *parent_name, void __iomem *base);
 
 struct clk_hw *clk_hw_register_gate2(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
-- 
2.26.2

[PATCH 3/9] clk: imx: Update the compsite driver to support imx8ulp

[Jacky Bai]

On i.MX8ULP, some peripherals have a sw_rst control resides
in the per device PCC clock control register, all others are
same as i.MX7ULP, so update the 7ulp clock composite driver to
support i.MX8ULP to maxmimize the code reuse.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/clk-composite-7ulp.c | 61 ++++++++++++++++++++++++++--
 drivers/clk/imx/clk.h                |  6 +++
 2 files changed, 64 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
index 7c4f31b31eb0..9298bca7a62a 100644
--- a/drivers/clk/imx/clk-composite-7ulp.c
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -22,11 +22,50 @@
 #define PCG_PCD_WIDTH	3
 #define PCG_PCD_MASK	0x7
 
-struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
+#define SW_RST		BIT(28)
+
+static int pcc_gate_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 val;
+	int ret;
+
+	ret = clk_gate_ops.enable(hw);
+	if (ret)
+		return ret;
+
+	/*
+	 * release the sw reset for peripherals associated with
+	 * with this pcc clock.
+	 */
+	val = readl(gate->reg);
+	val |= SW_RST;
+	writel(val, gate->reg);
+
+	return 0;
+}
+
+static void pcc_gate_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static int pcc_gate_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static const struct clk_ops pcc_gate_ops = {
+	.enable = pcc_gate_enable,
+	.disable = pcc_gate_disable,
+	.is_enabled = pcc_gate_is_enabled,
+};
+
+static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 				     const char * const *parent_names,
 				     int num_parents, bool mux_present,
 				     bool rate_present, bool gate_present,
-				     void __iomem *reg)
+				     void __iomem *reg, bool has_swrst)
 {
 	struct clk_hw *mux_hw = NULL, *fd_hw = NULL, *gate_hw = NULL;
 	struct clk_fractional_divider *fd = NULL;
@@ -76,7 +115,7 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 				       mux_hw, &clk_mux_ops, fd_hw,
 				       &clk_fractional_divider_ops, gate_hw,
-				       &clk_gate_ops, CLK_SET_RATE_GATE |
+				       has_swrst ? &pcc_gate_ops : &clk_gate_ops, CLK_SET_RATE_GATE |
 				       CLK_SET_PARENT_GATE);
 	if (IS_ERR(hw)) {
 		kfree(mux);
@@ -86,3 +125,19 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 
 	return hw;
 }
+
+struct clk_hw *imx7ulp_clk_hw_composite(const char *name, const char * const *parent_names,
+				int num_parents, bool mux_present, bool rate_present,
+				bool gate_present, void __iomem *reg)
+{
+	return imx_ulp_clk_hw_composite(name, parent_names, num_parents, mux_present, rate_present,
+					gate_present, reg, false);
+}
+
+struct clk_hw *imx8ulp_clk_hw_composite(const char *name, const char * const *parent_names,
+				int num_parents, bool mux_present, bool rate_present,
+				bool gate_present, void __iomem *reg, bool has_swrst)
+{
+	return imx_ulp_clk_hw_composite(name, parent_names, num_parents, mux_present, rate_present,
+					gate_present, reg, has_swrst);
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 964f5cddc7aa..2acac152c4aa 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -237,6 +237,12 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 				     bool rate_present, bool gate_present,
 				     void __iomem *reg);
 
+struct clk_hw *imx8ulp_clk_hw_composite(const char *name,
+				     const char * const *parent_names,
+				     int num_parents, bool mux_present,
+				     bool rate_present, bool gate_present,
+				     void __iomem *reg, bool has_swrst);
+
 struct clk_hw *imx_clk_hw_fixup_divider(const char *name, const char *parent,
 				  void __iomem *reg, u8 shift, u8 width,
 				  void (*fixup)(u32 *val));
-- 
2.26.2

[PATCH 4/9] clk: imx: disable i.mx7ulp composite clock during initialization

[Jacky Bai]

From: Anson Huang <Anson.Huang@nxp.com>

i.MX7ULP peripheral clock ONLY allow parent/rate to be changed
with clock gated, however, during clock tree initialization, the
peripheral clock could be enabled by bootloader, but the prepare
count in clock tree is still zero, so clock core driver will allow
parent/rate changed even with CLK_SET_RATE_GATE/CLK_SET_PARENT_GATE
set, but the change will fail due to HW NOT allow parent/rate change
with clock enabled. It will cause clock HW status mismatch with
clock tree info and lead to function issue. Below is an example:

usdhc0's pcc clock value is 0xC5000000 during kernel boot up, it
means usdhc0 clock is enabled, its parent is APLL_PFD1. In DT file,
the usdhc0 clock settings are as below:

assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;

when kernel boot up, the clock tree info is as below, but the usdhc0
PCC register is still 0xC5000000, which means its parent is still
from APLL_PFD1, which is incorrect and cause usdhc0 NOT work.

nic1_clk       2        2        0   176000000          0     0  50000
    usdhc0       0        0        0   176000000          0     0  50000

After making sure the peripheral clock is disabled during clock tree
initialization, the usdhc0 is working, and this change is necessary
for all i.MX7ULP peripheral clocks.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 drivers/clk/imx/clk-composite-7ulp.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
index 9298bca7a62a..ba48445a0007 100644
--- a/drivers/clk/imx/clk-composite-7ulp.c
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -8,6 +8,7 @@
 #include <linux/bits.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/slab.h>
 
 #include "clk.h"
@@ -72,6 +73,7 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 	struct clk_gate *gate = NULL;
 	struct clk_mux *mux = NULL;
 	struct clk_hw *hw;
+	u32 val;
 
 	if (mux_present) {
 		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
@@ -110,6 +112,18 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 		gate_hw = &gate->hw;
 		gate->reg = reg;
 		gate->bit_idx = PCG_CGC_SHIFT;
+		/*
+		 * make sure clock is gated during clock tree initialization,
+		 * the HW ONLY allow clock parent/rate changed with clock gated,
+		 * during clock tree initialization, clocks could be enabled
+		 * by bootloader, so the HW status will mismatch with clock tree
+		 * prepare count, then clock core driver will allow parent/rate
+		 * change since the prepare count is zero, but HW actually
+		 * prevent the parent/rate change due to the clock is enabled.
+		 */
+		val = readl_relaxed(reg);
+		val &= ~(1 << PCG_CGC_SHIFT);
+		writel_relaxed(val, reg);
 	}
 
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
-- 
2.26.2

[PATCH 5/9] clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp

[Jacky Bai]

For the imx_composite-7ulp clock type, The clock parent should
be changed explicitly by end user of this clock, if the the
'CLK_SET_RATE_NO_REPARENT' flag is not set, when user want to
set a clock frequency that can NOT get from HW accurately, then
the clock's parent will be switch to another clock parent sometimes.
This is NOT what we expected and introduced some additional debug
effort, so add the 'CLK_SET_RATE_NO_REPARENT' to avoid such unexpected
result.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/clk-composite-7ulp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
index ba48445a0007..99a36a73dcb5 100644
--- a/drivers/clk/imx/clk-composite-7ulp.c
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -130,7 +130,7 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 				       mux_hw, &clk_mux_ops, fd_hw,
 				       &clk_fractional_divider_ops, gate_hw,
 				       has_swrst ? &pcc_gate_ops : &clk_gate_ops, CLK_SET_RATE_GATE |
-				       CLK_SET_PARENT_GATE);
+				       CLK_SET_PARENT_GATE | CLK_SET_RATE_NO_REPARENT);
 	if (IS_ERR(hw)) {
 		kfree(mux);
 		kfree(fd);
-- 
2.26.2

[PATCH 6/9] clk: imx: disable the pfd when set pfdv2 clock rate

[Jacky Bai]

It is possible that a PFD is enabled in HW but not in SW. That
means the enable count & prepare count of the PFD clock is '0',
so the 'CLK_SET_RATE' flag can do nothing when the rate is changed
while the PFD is hw enabled. In order to safely change the pfd
rate, we can disable the PFD directly if it is hw enabled but not
used by SW end user.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/clk-pfdv2.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index 6b744c84278e..9cba83521988 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -161,8 +161,17 @@ static int clk_pfdv2_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!rate)
 		return -EINVAL;
 
-	/* PFD can NOT change rate without gating */
-	WARN_ON(clk_pfdv2_is_enabled(hw));
+	/*
+	 * PFD can NOT change rate without gating.
+	 * as the PFDs may enabled in HW by default but no
+	 * consumer used it, the enable count is '0', so the
+	 * 'SET_RATE_GATE' can NOT help on blocking the set_rate
+	 * ops especially for 'assigned-clock-xxx'. In order
+	 * to simplify the case, just disable the PFD if it is
+	 * enabled in HW but not in SW.
+	 */
+	if (clk_pfdv2_is_enabled(hw))
+		clk_pfdv2_disable(hw);
 
 	tmp = tmp * 18 + rate / 2;
 	do_div(tmp, rate);
-- 
2.26.2

[PATCH 7/9] clk: imx: Update the pfdv2 for 8ulp specific support

[Jacky Bai]

On i.MX8ULP, the 'CLK_SET_RATE_PARENT' flag should NOT be
set and according to the laest RM, the PFD divider value range
seems will be changed in the future, so update the pfdv2 to
include the specific support for i.MX8ULP.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/clk-imx7ulp.c | 16 ++++++++--------
 drivers/clk/imx/clk-pfdv2.c   |  9 ++++++---
 drivers/clk/imx/clk.h         |  9 +++++++--
 3 files changed, 21 insertions(+), 13 deletions(-)

diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index ba50d6db8097..b6e45e77ee39 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -82,16 +82,16 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	hws[IMX7ULP_CLK_SPLL]		= imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "spll",  "spll_pre_div", base + 0x600);
 
 	/* APLL PFDs */
-	hws[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_hw_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
-	hws[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_hw_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
-	hws[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_hw_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
-	hws[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_hw_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
+	hws[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd0", "apll", base + 0x50c, 0);
+	hws[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd1", "apll", base + 0x50c, 1);
+	hws[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd2", "apll", base + 0x50c, 2);
+	hws[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd3", "apll", base + 0x50c, 3);
 
 	/* SPLL PFDs */
-	hws[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_hw_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
-	hws[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_hw_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
-	hws[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_hw_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
-	hws[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_hw_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
+	hws[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd0", "spll", base + 0x60C, 0);
+	hws[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd1", "spll", base + 0x60C, 1);
+	hws[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd2", "spll", base + 0x60C, 2);
+	hws[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd3", "spll", base + 0x60C, 3);
 
 	/* PLL Mux */
 	hws[IMX7ULP_CLK_APLL_PFD_SEL]	= imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index 9cba83521988..42505669cdfb 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -200,8 +200,8 @@ static const struct clk_ops clk_pfdv2_ops = {
 	.is_enabled     = clk_pfdv2_is_enabled,
 };
 
-struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
-			     void __iomem *reg, u8 idx)
+struct clk_hw *imx_clk_hw_pfdv2(enum imx_pfdv2_type type, const char *name,
+			     const char *parent_name, void __iomem *reg, u8 idx)
 {
 	struct clk_init_data init;
 	struct clk_pfdv2 *pfd;
@@ -223,7 +223,10 @@ struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
 	init.ops = &clk_pfdv2_ops;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
-	init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT;
+	if (type == IMX_PFDV2_IMX7ULP)
+		init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT;
+	else
+		init.flags = CLK_SET_RATE_GATE;
 
 	pfd->hw.init = &init;
 
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 2acac152c4aa..76de2972d021 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -47,6 +47,11 @@ enum imx_pllv4_type {
 	IMX_PLLV4_IMX8ULP,
 };
 
+enum imx_pfdv2_type {
+	IMX_PFDV2_IMX7ULP,
+	IMX_PFDV2_IMX8ULP,
+};
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 struct imx_pll14xx_rate_table {
 	unsigned int rate;
@@ -220,8 +225,8 @@ struct clk_hw *imx_clk_hw_gate_exclusive(const char *name, const char *parent,
 struct clk_hw *imx_clk_hw_pfd(const char *name, const char *parent_name,
 		void __iomem *reg, u8 idx);
 
-struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
-			     void __iomem *reg, u8 idx);
+struct clk_hw *imx_clk_hw_pfdv2(enum imx_pfdv2_type type, const char *name,
+	 const char *parent_name, void __iomem *reg, u8 idx);
 
 struct clk_hw *imx_clk_hw_busy_divider(const char *name, const char *parent_name,
 				 void __iomem *reg, u8 shift, u8 width,
-- 
2.26.2

[PATCH 8/9] clk: imx: Add clock driver for imx8ulp

[Jacky Bai]

Add clock driver for i.MX8ULP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/Kconfig       |   6 +
 drivers/clk/imx/Makefile      |   2 +
 drivers/clk/imx/clk-imx8ulp.c | 465 ++++++++++++++++++++++++++++++++++
 3 files changed, 473 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx8ulp.c

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 47d9ec3abd2f..b81d6437ed95 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -98,3 +98,9 @@ config CLK_IMX8QXP
 	select MXC_CLK_SCU
 	help
 	  Build the driver for IMX8QXP SCU based clocks.
+
+config CLK_IMX8ULP
+	tristate "IMX8ULP CCM Clock Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	    Build the driver for i.MX8ULP CCM Clock Driver
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index c24a2acbfa56..b5e040026dfb 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -31,6 +31,8 @@ clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o \
 				     clk-imx8qxp-rsrc.o clk-imx8qm-rsrc.o
 clk-imx-lpcg-scu-$(CONFIG_CLK_IMX8QXP) += clk-lpcg-scu.o clk-imx8qxp-lpcg.o
 
+obj-$(CONFIG_CLK_IMX8ULP) += clk-imx8ulp.o
+
 obj-$(CONFIG_CLK_IMX1)   += clk-imx1.o
 obj-$(CONFIG_CLK_IMX25)  += clk-imx25.o
 obj-$(CONFIG_CLK_IMX27)  += clk-imx27.o
diff --git a/drivers/clk/imx/clk-imx8ulp.c b/drivers/clk/imx/clk-imx8ulp.c
new file mode 100644
index 000000000000..44d7dc105848
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8ulp.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8ulp-clock.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+static const char * const pll_pre_sels[] = { "sosc", "frosc", };
+static const char * const a35_sels[] = { "frosc", "spll2", "sosc", "lvds", };
+static const char * const nic_sels[] = { "frosc", "spll3_pfd0", "sosc", "lvds", };
+static const char * const pcc3_periph_bus_sels[] = { "dummy", "lposc", "sosc_div2",
+						     "frosc_div2", "xbar_divbus", "spll3_pfd1_div1",
+						     "spll3_pfd0_div2", "spll3_pfd0_div1", };
+static const char * const pcc4_periph_bus_sels[] = { "dummy", "dummy", "lposc",
+						     "sosc_div2", "frosc_div2", "xbar_divbus",
+						     "spll3_vcodiv", "spll3_pfd0_div1", };
+static const char * const pcc4_periph_plat_sels[] = { "dummy", "sosc_div1", "frosc_div1",
+						      "spll3_pfd3_div2", "spll3_pfd3_div1",
+						      "spll3_pfd2_div2", "spll3_pfd2_div1",
+						      "spll3_pfd1_div2", };
+static const char * const pcc5_periph_bus_sels[] = { "dummy", "dummy", "lposc",
+						     "sosc_div2", "frosc_div2", "lpav_bus_clk",
+						     "pll4_vcodiv", "pll4_pfd3_div1", };
+static const char * const pcc5_periph_plat_sels[] = { "dummy", "pll4_pfd3_div2", "pll4_pfd2_div2",
+						      "pll4_pfd2_div1", "pll4_pfd1_div2",
+						      "pll4_pfd1_div1", "pll4_pfd0_div2",
+						      "pll4_pfd0_div1", };
+static const char * const hifi_sels[] = { "frosc", "pll4", "pll4_pfd0", "sosc",
+					 "lvds", "dummy", "dummy", "dummy", };
+static const char * const ddr_sels[] = { "frosc", "pll4_pfd1", "sosc", "lvds",
+					 "pll4", "pll4", "pll4", "pll4", };
+static const char * const lpav_sels[] = { "frosc", "pll4_pfd1", "sosc", "lvds", };
+static const char * const sai45_sels[] = { "spll3_pfd1_div1", "aud_clk1", "aud_clk2", "sosc", };
+static const char * const sai67_sels[] = { "spll1_pfd2_div", "spll3_pfd1_div1", "aud_clk0", "aud_clk1", "aud_clk2", "sosc", "dummy", "dummy", };
+static const char * const aud_clk1_sels[] = { "ext_aud_mclk2", "sai4_rx_bclk", "sai4_tx_bclk", "sai5_rx_bclk", "sai5_tx_bclk", "dummy", "dummy", "dummy", };
+static const char * const aud_clk2_sels[] = { "ext_aud_mclk3", "sai6_rx_bclk", "sai6_tx_bclk", "sai7_rx_bclk", "sai7_tx_bclk", "spdif_rx", "dummy", "dummy", };
+static const char * const enet_ts_sels[] = { "ext_rmii_clk", "ext_ts_clk", "rosc", "ext_aud_mclk", "sosc", "dummy", "dummy", "dummy"};
+static const char * const xbar_divbus[] = { "xbar_divbus" };
+static const char * const nic_per_divplat[] = { "nic_per_divplat" };
+static const char * const lpav_axi_div[] = { "lpav_axi_div" };
+static const char * const lpav_bus_div[] = { "lpav_bus_div" };
+
+static int imx8ulp_clk_cgc1_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_CGC1_END),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8ULP_CLK_CGC1_END;
+	clks = clk_data->hws;
+
+	clks[IMX8ULP_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
+
+	clks[IMX8ULP_CLK_FROSC] = imx_obtain_fixed_clk_hw(np, "frosc");
+	clks[IMX8ULP_CLK_LPOSC] = imx_obtain_fixed_clk_hw(np, "lposc");
+	clks[IMX8ULP_CLK_ROSC] = imx_obtain_fixed_clk_hw(np, "rosc");
+	clks[IMX8ULP_CLK_SOSC] = imx_obtain_fixed_clk_hw(np, "sosc");
+
+	/* CGC1 */
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
+
+	clks[IMX8ULP_CLK_SPLL2_PRE_SEL]	= imx_clk_hw_mux_flags("spll2_pre_sel", base + 0x510, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+	clks[IMX8ULP_CLK_SPLL3_PRE_SEL]	= imx_clk_hw_mux_flags("spll3_pre_sel", base + 0x610, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+
+	clks[IMX8ULP_CLK_SPLL2] = imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP, "spll2", "spll2_pre_sel", base + 0x500);
+	clks[IMX8ULP_CLK_SPLL3] = imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP, "spll3", "spll3_pre_sel", base + 0x600);
+	clks[IMX8ULP_CLK_SPLL3_VCODIV] = imx_clk_hw_divider("spll3_vcodiv", "spll3", base + 0x604, 0, 6);
+
+	clks[IMX8ULP_CLK_SPLL3_PFD0] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "spll3_pfd0", "spll3_vcodiv", base + 0x614, 0);
+	clks[IMX8ULP_CLK_SPLL3_PFD1] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "spll3_pfd1", "spll3_vcodiv", base + 0x614, 1);
+	clks[IMX8ULP_CLK_SPLL3_PFD2] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "spll3_pfd2", "spll3_vcodiv", base + 0x614, 2);
+	clks[IMX8ULP_CLK_SPLL3_PFD3] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "spll3_pfd3", "spll3_vcodiv", base + 0x614, 3);
+
+	clks[IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE] = imx_clk_hw_gate_dis("spll3_pfd0_div1_gate", "spll3_pfd0", base + 0x608, 7);
+	clks[IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE] = imx_clk_hw_gate_dis("spll3_pfd0_div2_gate", "spll3_pfd0", base + 0x608, 15);
+	clks[IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE] = imx_clk_hw_gate_dis("spll3_pfd1_div1_gate", "spll3_pfd1", base + 0x608, 23);
+	clks[IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE] = imx_clk_hw_gate_dis("spll3_pfd1_div2_gate", "spll3_pfd1", base + 0x608, 31);
+	clks[IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE] = imx_clk_hw_gate_dis("spll3_pfd2_div1_gate", "spll3_pfd2", base + 0x60c, 7);
+	clks[IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE] = imx_clk_hw_gate_dis("spll3_pfd2_div2_gate", "spll3_pfd2", base + 0x60c, 15);
+	clks[IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE] = imx_clk_hw_gate_dis("spll3_pfd3_div1_gate", "spll3_pfd3", base + 0x60c, 23);
+	clks[IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE] = imx_clk_hw_gate_dis("spll3_pfd3_div2_gate", "spll3_pfd3", base + 0x60c, 31);
+	clks[IMX8ULP_CLK_SPLL3_PFD0_DIV1] = imx_clk_hw_divider("spll3_pfd0_div1", "spll3_pfd0_div1_gate", base + 0x608, 0, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD0_DIV2] = imx_clk_hw_divider("spll3_pfd0_div2", "spll3_pfd0_div2_gate", base + 0x608, 8, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD1_DIV1] = imx_clk_hw_divider("spll3_pfd1_div1", "spll3_pfd1_div1_gate", base + 0x608, 16, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD1_DIV2] = imx_clk_hw_divider("spll3_pfd1_div2", "spll3_pfd1_div2_gate", base + 0x608, 24, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD2_DIV1] = imx_clk_hw_divider("spll3_pfd2_div1", "spll3_pfd2_div1_gate", base + 0x60c, 0, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD2_DIV2] = imx_clk_hw_divider("spll3_pfd2_div2", "spll3_pfd2_div2_gate", base + 0x60c, 8, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD3_DIV1] = imx_clk_hw_divider("spll3_pfd3_div1", "spll3_pfd3_div1_gate", base + 0x60c, 16, 6);
+	clks[IMX8ULP_CLK_SPLL3_PFD3_DIV2] = imx_clk_hw_divider("spll3_pfd3_div2", "spll3_pfd3_div2_gate", base + 0x60c, 24, 6);
+
+	clks[IMX8ULP_CLK_A35_SEL] = imx_clk_hw_mux2("a35_sel", base + 0x14, 28, 2, a35_sels, ARRAY_SIZE(a35_sels));
+	clks[IMX8ULP_CLK_A35_DIV] = imx_clk_hw_divider_flags("a35_div", "a35_sel", base + 0x14, 21, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX8ULP_CLK_NIC_SEL] = imx_clk_hw_mux2("nic_sel", base + 0x34, 28, 2, nic_sels, ARRAY_SIZE(nic_sels));
+	clks[IMX8ULP_CLK_NIC_AD_DIVPLAT] = imx_clk_hw_divider_flags("nic_ad_divplat", "nic_sel", base + 0x34, 21, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_NIC_PER_DIVPLAT] = imx_clk_hw_divider_flags("nic_per_divplat", "nic_ad_divplat", base + 0x34, 14, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_XBAR_AD_DIVPLAT] = imx_clk_hw_divider_flags("xbar_ad_divplat", "nic_ad_divplat", base + 0x38, 14, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_XBAR_DIVBUS] = imx_clk_hw_divider_flags("xbar_divbus", "nic_ad_divplat", base + 0x38, 7, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_XBAR_AD_SLOW] = imx_clk_hw_divider_flags("xbar_ad_slow", "nic_ad_divplat", base + 0x38, 0, 6, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX8ULP_CLK_SOSC_DIV1_GATE] = imx_clk_hw_gate_dis("sosc_div1_gate", "sosc", base + 0x108, 7);
+	clks[IMX8ULP_CLK_SOSC_DIV2_GATE] = imx_clk_hw_gate_dis("sosc_div2_gate", "sosc", base + 0x108, 15);
+	clks[IMX8ULP_CLK_SOSC_DIV3_GATE] = imx_clk_hw_gate_dis("sosc_div3_gate", "sosc", base + 0x108, 23);
+	clks[IMX8ULP_CLK_SOSC_DIV1] = imx_clk_hw_divider("sosc_div1", "sosc_div1_gate", base + 0x108, 0, 6);
+	clks[IMX8ULP_CLK_SOSC_DIV2] = imx_clk_hw_divider("sosc_div2", "sosc_div2_gate", base + 0x108, 8, 6);
+	clks[IMX8ULP_CLK_SOSC_DIV3] = imx_clk_hw_divider("sosc_div3", "sosc_div3_gate", base + 0x108, 16, 6);
+
+	clks[IMX8ULP_CLK_FROSC_DIV1_GATE] = imx_clk_hw_gate_dis("frosc_div1_gate", "frosc", base + 0x208, 7);
+	clks[IMX8ULP_CLK_FROSC_DIV2_GATE] = imx_clk_hw_gate_dis("frosc_div2_gate", "frosc", base + 0x208, 15);
+	clks[IMX8ULP_CLK_FROSC_DIV3_GATE] = imx_clk_hw_gate_dis("frosc_div3_gate", "frosc", base + 0x208, 23);
+	clks[IMX8ULP_CLK_FROSC_DIV1] = imx_clk_hw_divider("frosc_div1", "frosc_div1_gate", base + 0x208, 0, 6);
+	clks[IMX8ULP_CLK_FROSC_DIV2] = imx_clk_hw_divider("frosc_div2", "frosc_div2_gate", base + 0x208, 8, 6);
+	clks[IMX8ULP_CLK_FROSC_DIV3] = imx_clk_hw_divider("frosc_div3", "frosc_div3_gate", base + 0x208, 16, 6);
+	clks[IMX8ULP_CLK_AUD_CLK1] = imx_clk_hw_mux2("aud_clk1", base + 0x900, 0, 3, aud_clk1_sels, ARRAY_SIZE(aud_clk1_sels));
+	clks[IMX8ULP_CLK_SAI4_SEL] = imx_clk_hw_mux2("sai4_sel", base + 0x904, 0, 2, sai45_sels, ARRAY_SIZE(sai45_sels));
+	clks[IMX8ULP_CLK_SAI5_SEL] = imx_clk_hw_mux2("sai5_sel", base + 0x904, 8, 2, sai45_sels, ARRAY_SIZE(sai45_sels));
+	clks[IMX8ULP_CLK_ENET_TS_SEL] = imx_clk_hw_mux2("enet_ts", base + 0x700, 24, 3, enet_ts_sels, ARRAY_SIZE(enet_ts_sels));
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+}
+
+static int imx8ulp_clk_cgc2_init(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_CGC2_END),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8ULP_CLK_CGC2_END;
+	clks = clk_data->hws;
+
+	/* CGC2 */
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
+
+	clks[IMX8ULP_CLK_PLL4_PRE_SEL] = imx_clk_hw_mux_flags("pll4_pre_sel", base + 0x610, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+
+	clks[IMX8ULP_CLK_PLL4]	= imx_clk_hw_pllv4(IMX_PLLV4_IMX8ULP, "pll4", "pll4_pre_sel", base + 0x600);
+	clks[IMX8ULP_CLK_PLL4_VCODIV] = imx_clk_hw_divider("pll4_vcodiv", "pll4", base + 0x604, 0, 6);
+
+	clks[IMX8ULP_CLK_HIFI_SEL] = imx_clk_hw_mux_flags("hifi_sel", base + 0x14, 28, 3, hifi_sels, ARRAY_SIZE(hifi_sels), CLK_SET_PARENT_GATE);
+	clks[IMX8ULP_CLK_HIFI_DIVCORE] = imx_clk_hw_divider("hifi_core_div", "hifi_sel", base + 0x14, 21, 6);
+	clks[IMX8ULP_CLK_HIFI_DIVPLAT] = imx_clk_hw_divider("hifi_plat_div", "hifi_core_div", base + 0x14, 14, 6);
+
+	clks[IMX8ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x40, 28, 3, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_PARENT_GATE);
+	clks[IMX8ULP_CLK_DDR_DIV] = imx_clk_hw_divider_flags("ddr_div", "ddr_sel", base + 0x40, 21, 6, CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_LPAV_AXI_SEL] = imx_clk_hw_mux("lpav_sel", base + 0x3c, 28, 2, lpav_sels, ARRAY_SIZE(lpav_sels));
+	clks[IMX8ULP_CLK_LPAV_AXI_DIV] = imx_clk_hw_divider_flags("lpav_axi_div", "lpav_sel", base + 0x3c, 21, 6, CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_LPAV_AHB_DIV] = imx_clk_hw_divider_flags("lpav_ahb_div", "lpav_axi_div", base + 0x3c, 14, 6, CLK_IS_CRITICAL);
+	clks[IMX8ULP_CLK_LPAV_BUS_DIV] = imx_clk_hw_divider_flags("lpav_bus_div", "lpav_axi_div", base + 0x3c, 7, 6, CLK_IS_CRITICAL);
+
+	clks[IMX8ULP_CLK_PLL4_PFD0] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "pll4_pfd0", "pll4_vcodiv", base + 0x614, 0);
+	clks[IMX8ULP_CLK_PLL4_PFD1] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "pll4_pfd1", "pll4_vcodiv", base + 0x614, 1);
+	clks[IMX8ULP_CLK_PLL4_PFD2] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "pll4_pfd2", "pll4_vcodiv", base + 0x614, 2);
+	clks[IMX8ULP_CLK_PLL4_PFD3] = imx_clk_hw_pfdv2(IMX_PFDV2_IMX8ULP, "pll4_pfd3", "pll4_vcodiv", base + 0x614, 3);
+
+	clks[IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE] = imx_clk_hw_gate_dis("pll4_pfd0_div1_gate", "pll4_pfd0", base + 0x608, 7);
+	clks[IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE] = imx_clk_hw_gate_dis("pll4_pfd0_div2_gate", "pll4_pfd0", base + 0x608, 15);
+	clks[IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE] = imx_clk_hw_gate_dis("pll4_pfd1_div1_gate", "pll4_pfd1", base + 0x608, 23);
+	clks[IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE] = imx_clk_hw_gate_dis("pll4_pfd1_div2_gate", "pll4_pfd1", base + 0x608, 31);
+	clks[IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE] = imx_clk_hw_gate_dis("pll4_pfd2_div1_gate", "pll4_pfd2", base + 0x60c, 7);
+	clks[IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE] = imx_clk_hw_gate_dis("pll4_pfd2_div2_gate", "pll4_pfd2", base + 0x60c, 15);
+	clks[IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE] = imx_clk_hw_gate_dis("pll4_pfd3_div1_gate", "pll4_pfd3", base + 0x60c, 23);
+	clks[IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE] = imx_clk_hw_gate_dis("pll4_pfd3_div2_gate", "pll4_pfd3", base + 0x60c, 31);
+	clks[IMX8ULP_CLK_PLL4_PFD0_DIV1] = imx_clk_hw_divider("pll4_pfd0_div1", "pll4_pfd0_div1_gate", base + 0x608, 0, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD0_DIV2] = imx_clk_hw_divider("pll4_pfd0_div2", "pll4_pfd0_div2_gate", base + 0x608, 8, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD1_DIV1] = imx_clk_hw_divider("pll4_pfd1_div1", "pll4_pfd1_div1_gate", base + 0x608, 16, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD1_DIV2] = imx_clk_hw_divider("pll4_pfd1_div2", "pll4_pfd1_div2_gate", base + 0x608, 24, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD2_DIV1] = imx_clk_hw_divider("pll4_pfd2_div1", "pll4_pfd2_div1_gate", base + 0x60c, 0, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD2_DIV2] = imx_clk_hw_divider("pll4_pfd2_div2", "pll4_pfd2_div2_gate", base + 0x60c, 8, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD3_DIV1] = imx_clk_hw_divider("pll4_pfd3_div1", "pll4_pfd3_div1_gate", base + 0x60c, 16, 6);
+	clks[IMX8ULP_CLK_PLL4_PFD3_DIV2] = imx_clk_hw_divider("pll4_pfd3_div2", "pll4_pfd3_div2_gate", base + 0x60c, 24, 6);
+
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE] = imx_clk_hw_gate_dis("cgc2_sosc_div1_gate", "sosc", base + 0x108, 7);
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE] = imx_clk_hw_gate_dis("cgc2_sosc_div2_gate", "sosc", base + 0x108, 15);
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE] = imx_clk_hw_gate_dis("cgc2_sosc_div3_gate", "sosc", base + 0x108, 23);
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV1] = imx_clk_hw_divider("cgc2_sosc_div1", "cgc2_sosc_div1_gate", base + 0x108, 0, 6);
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV2] = imx_clk_hw_divider("cgc2_sosc_div2", "cgc2_sosc_div2_gate", base + 0x108, 8, 6);
+	clks[IMX8ULP_CLK_CGC2_SOSC_DIV3] = imx_clk_hw_divider("cgc2_sosc_div3", "cgc2_sosc_div3_gate", base + 0x108, 16, 6);
+
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE] = imx_clk_hw_gate_dis("cgc2_frosc_div1_gate", "frosc", base + 0x208, 7);
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE] = imx_clk_hw_gate_dis("cgc2_frosc_div2_gate", "frosc", base + 0x208, 15);
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE] = imx_clk_hw_gate_dis("cgc2_frosc_div3_gate", "frosc", base + 0x208, 23);
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV1] = imx_clk_hw_divider("cgc2_frosc_div1", "cgc2_frosc_div1_gate", base + 0x208, 0, 6);
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV2] = imx_clk_hw_divider("cgc2_frosc_div2", "cgc2_frosc_div2_gate", base + 0x208, 8, 6);
+	clks[IMX8ULP_CLK_CGC2_FROSC_DIV3] = imx_clk_hw_divider("cgc2_frosc_div3", "cgc2_frosc_div3_gate", base + 0x208, 16, 6);
+	clks[IMX8ULP_CLK_AUD_CLK2]  = imx_clk_hw_mux2("aud_clk2", base + 0x900, 0, 3, aud_clk2_sels, ARRAY_SIZE(aud_clk2_sels));
+	clks[IMX8ULP_CLK_SAI6_SEL]  = imx_clk_hw_mux2("sai6_sel", base + 0x904, 0, 3, sai67_sels, ARRAY_SIZE(sai67_sels));
+	clks[IMX8ULP_CLK_SAI7_SEL]  = imx_clk_hw_mux2("sai7_sel", base + 0x904, 8, 3, sai67_sels, ARRAY_SIZE(sai67_sels));
+	clks[IMX8ULP_CLK_SPDIF_SEL] = imx_clk_hw_mux2("spdif_sel", base + 0x910, 0, 3, sai67_sels, ARRAY_SIZE(sai67_sels));
+	clks[IMX8ULP_CLK_DSI_PHY_REF] = imx_clk_hw_fixed("dsi_phy_ref", 24000000);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+}
+
+static int imx8ulp_clk_pcc3_init(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+	int ret;
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_PCC3_END),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8ULP_CLK_PCC3_END;
+	clks = clk_data->hws;
+
+	/* PCC3 */
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
+
+	clks[IMX8ULP_CLK_WDOG3] = imx8ulp_clk_hw_composite("wdog3", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xa8, 1);
+	clks[IMX8ULP_CLK_WDOG4] = imx8ulp_clk_hw_composite("wdog4", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xac, 1);
+	clks[IMX8ULP_CLK_LPIT1] = imx8ulp_clk_hw_composite("lpit1", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xc8, 1);
+	clks[IMX8ULP_CLK_TPM4] = imx8ulp_clk_hw_composite("tpm4", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xcc, 1);
+	clks[IMX8ULP_CLK_TPM5] = imx8ulp_clk_hw_composite("tpm5", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xd0, 1);
+	clks[IMX8ULP_CLK_FLEXIO1] = imx8ulp_clk_hw_composite("flexio1", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xd4, 1);
+	clks[IMX8ULP_CLK_I3C2] = imx8ulp_clk_hw_composite("i3c2", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xd8, 1);
+	clks[IMX8ULP_CLK_LPI2C4] = imx8ulp_clk_hw_composite("lpi2c4", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xdc, 1);
+	clks[IMX8ULP_CLK_LPI2C5] = imx8ulp_clk_hw_composite("lpi2c5", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xe0, 1);
+	clks[IMX8ULP_CLK_LPUART4] = imx8ulp_clk_hw_composite("lpuart4", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xe4, 1);
+	clks[IMX8ULP_CLK_LPUART5] = imx8ulp_clk_hw_composite("lpuart5", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xe8, 1);
+	clks[IMX8ULP_CLK_LPSPI4] = imx8ulp_clk_hw_composite("lpspi4", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xec, 1);
+	clks[IMX8ULP_CLK_LPSPI5] = imx8ulp_clk_hw_composite("lpspi5", pcc3_periph_bus_sels, ARRAY_SIZE(pcc3_periph_bus_sels), true, true, true, base + 0xf0, 1);
+
+	clks[IMX8ULP_CLK_DMA1_MP] = imx_clk_hw_gate("pcc_dma1_mp", "xbar_ad_divplat", base + 0x4, 30);
+	clks[IMX8ULP_CLK_DMA1_CH0] = imx_clk_hw_gate("pcc_dma1_ch0", "xbar_ad_divplat", base + 0x8, 30);
+	clks[IMX8ULP_CLK_DMA1_CH1] = imx_clk_hw_gate("pcc_dma1_ch1", "xbar_ad_divplat", base + 0xc, 30);
+	clks[IMX8ULP_CLK_DMA1_CH2] = imx_clk_hw_gate("pcc_dma1_ch2", "xbar_ad_divplat", base + 0x10, 30);
+	clks[IMX8ULP_CLK_DMA1_CH3] = imx_clk_hw_gate("pcc_dma1_ch3", "xbar_ad_divplat", base + 0x14, 30);
+	clks[IMX8ULP_CLK_DMA1_CH4] = imx_clk_hw_gate("pcc_dma1_ch4", "xbar_ad_divplat", base + 0x18, 30);
+	clks[IMX8ULP_CLK_DMA1_CH5] = imx_clk_hw_gate("pcc_dma1_ch5", "xbar_ad_divplat", base + 0x1c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH6] = imx_clk_hw_gate("pcc_dma1_ch6", "xbar_ad_divplat", base + 0x20, 30);
+	clks[IMX8ULP_CLK_DMA1_CH7] = imx_clk_hw_gate("pcc_dma1_ch7", "xbar_ad_divplat", base + 0x24, 30);
+	clks[IMX8ULP_CLK_DMA1_CH8] = imx_clk_hw_gate("pcc_dma1_ch8", "xbar_ad_divplat", base + 0x28, 30);
+	clks[IMX8ULP_CLK_DMA1_CH9] = imx_clk_hw_gate("pcc_dma1_ch9", "xbar_ad_divplat", base + 0x2c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH10] = imx_clk_hw_gate("pcc_dma1_ch10", "xbar_ad_divplat", base + 0x30, 30);
+	clks[IMX8ULP_CLK_DMA1_CH11] = imx_clk_hw_gate("pcc_dma1_ch11", "xbar_ad_divplat", base + 0x34, 30);
+	clks[IMX8ULP_CLK_DMA1_CH12] = imx_clk_hw_gate("pcc_dma1_ch12", "xbar_ad_divplat", base + 0x38, 30);
+	clks[IMX8ULP_CLK_DMA1_CH13] = imx_clk_hw_gate("pcc_dma1_ch13", "xbar_ad_divplat", base + 0x3c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH14] = imx_clk_hw_gate("pcc_dma1_ch14", "xbar_ad_divplat", base + 0x40, 30);
+	clks[IMX8ULP_CLK_DMA1_CH15] = imx_clk_hw_gate("pcc_dma1_ch15", "xbar_ad_divplat", base + 0x44, 30);
+	clks[IMX8ULP_CLK_DMA1_CH16] = imx_clk_hw_gate("pcc_dma1_ch16", "xbar_ad_divplat", base + 0x48, 30);
+	clks[IMX8ULP_CLK_DMA1_CH17] = imx_clk_hw_gate("pcc_dma1_ch17", "xbar_ad_divplat", base + 0x4c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH18] = imx_clk_hw_gate("pcc_dma1_ch18", "xbar_ad_divplat", base + 0x50, 30);
+	clks[IMX8ULP_CLK_DMA1_CH19] = imx_clk_hw_gate("pcc_dma1_ch19", "xbar_ad_divplat", base + 0x54, 30);
+	clks[IMX8ULP_CLK_DMA1_CH20] = imx_clk_hw_gate("pcc_dma1_ch20", "xbar_ad_divplat", base + 0x58, 30);
+	clks[IMX8ULP_CLK_DMA1_CH21] = imx_clk_hw_gate("pcc_dma1_ch21", "xbar_ad_divplat", base + 0x5c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH22] = imx_clk_hw_gate("pcc_dma1_ch22", "xbar_ad_divplat", base + 0x60, 30);
+	clks[IMX8ULP_CLK_DMA1_CH23] = imx_clk_hw_gate("pcc_dma1_ch23", "xbar_ad_divplat", base + 0x64, 30);
+	clks[IMX8ULP_CLK_DMA1_CH24] = imx_clk_hw_gate("pcc_dma1_ch24", "xbar_ad_divplat", base + 0x68, 30);
+	clks[IMX8ULP_CLK_DMA1_CH25] = imx_clk_hw_gate("pcc_dma1_ch25", "xbar_ad_divplat", base + 0x6c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH26] = imx_clk_hw_gate("pcc_dma1_ch26", "xbar_ad_divplat", base + 0x70, 30);
+	clks[IMX8ULP_CLK_DMA1_CH27] = imx_clk_hw_gate("pcc_dma1_ch27", "xbar_ad_divplat", base + 0x74, 30);
+	clks[IMX8ULP_CLK_DMA1_CH28] = imx_clk_hw_gate("pcc_dma1_ch28", "xbar_ad_divplat", base + 0x78, 30);
+	clks[IMX8ULP_CLK_DMA1_CH29] = imx_clk_hw_gate("pcc_dma1_ch29", "xbar_ad_divplat", base + 0x7c, 30);
+	clks[IMX8ULP_CLK_DMA1_CH30] = imx_clk_hw_gate("pcc_dma1_ch30", "xbar_ad_divplat", base + 0x80, 30);
+	clks[IMX8ULP_CLK_DMA1_CH31] = imx_clk_hw_gate("pcc_dma1_ch31", "xbar_ad_divplat", base + 0x84, 30);
+	clks[IMX8ULP_CLK_MU0_B] = imx_clk_hw_gate("mu0_b", "xbar_ad_divplat", base + 0x88, 30);
+	clks[IMX8ULP_CLK_MU3_A] = imx_clk_hw_gate("mu3_a", "xbar_ad_divplat", base + 0x8c, 30);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+
+	imx_register_uart_clocks(1);
+
+	return ret;
+}
+
+static int imx8ulp_clk_pcc4_init(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_PCC4_END),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8ULP_CLK_PCC4_END;
+	clks = clk_data->hws;
+
+	/* PCC4 */
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
+
+	clks[IMX8ULP_CLK_FLEXSPI2] = imx8ulp_clk_hw_composite("flexspi2", pcc4_periph_plat_sels, ARRAY_SIZE(pcc4_periph_plat_sels), true, true, true, base + 0x4, 1);
+	clks[IMX8ULP_CLK_TPM6] = imx8ulp_clk_hw_composite("tpm6", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0x8, 1);
+	clks[IMX8ULP_CLK_TPM7] = imx8ulp_clk_hw_composite("tpm7", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0xc, 1);
+	clks[IMX8ULP_CLK_LPI2C6] = imx8ulp_clk_hw_composite("lpi2c6", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0x10, 1);
+	clks[IMX8ULP_CLK_LPI2C7] = imx8ulp_clk_hw_composite("lpi2c7", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0x14, 1);
+	clks[IMX8ULP_CLK_LPUART6] = imx8ulp_clk_hw_composite("lpuart6", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0x18, 1);
+	clks[IMX8ULP_CLK_LPUART7] = imx8ulp_clk_hw_composite("lpuart7", pcc4_periph_bus_sels, ARRAY_SIZE(pcc4_periph_bus_sels), true, true, true, base + 0x1c, 1);
+	clks[IMX8ULP_CLK_SAI4] = imx8ulp_clk_hw_composite("sai4", xbar_divbus, 1, false, false, true, base + 0x20, 1); /* sai ipg, NOT from sai sel */
+	clks[IMX8ULP_CLK_SAI5] = imx8ulp_clk_hw_composite("sai5", xbar_divbus, 1, false, false, true, base + 0x24, 1); /* sai ipg */
+	clks[IMX8ULP_CLK_PCTLE] = imx_clk_hw_gate("pctle", "xbar_divbus", base + 0x28, 30);
+	clks[IMX8ULP_CLK_PCTLF] = imx_clk_hw_gate("pctlf", "xbar_divbus", base + 0x2c, 30);
+	clks[IMX8ULP_CLK_USDHC0] = imx8ulp_clk_hw_composite("usdhc0", pcc4_periph_plat_sels, ARRAY_SIZE(pcc4_periph_plat_sels), true, false, true, base + 0x34, 1);
+	clks[IMX8ULP_CLK_USDHC1] = imx8ulp_clk_hw_composite("usdhc1", pcc4_periph_plat_sels, ARRAY_SIZE(pcc4_periph_plat_sels), true, false, true, base + 0x38, 1);
+	clks[IMX8ULP_CLK_USDHC2] = imx8ulp_clk_hw_composite("usdhc2", pcc4_periph_plat_sels, ARRAY_SIZE(pcc4_periph_plat_sels), true, false, true, base + 0x3c, 1);
+	clks[IMX8ULP_CLK_USB0] = imx8ulp_clk_hw_composite("usb0", nic_per_divplat, 1, false, false, true, base + 0x40, 1);
+	clks[IMX8ULP_CLK_USB0_PHY] = imx8ulp_clk_hw_composite("usb0_phy", xbar_divbus, 1, false, false, true, base + 0x44, 1);
+	clks[IMX8ULP_CLK_USB1] = imx8ulp_clk_hw_composite("usb1", nic_per_divplat, 1, false, false, true, base + 0x48, 1);
+	clks[IMX8ULP_CLK_USB1_PHY] = imx8ulp_clk_hw_composite("usb1_phy", xbar_divbus, 1, false, false, true, base + 0x4c, 1);
+	clks[IMX8ULP_CLK_USB_XBAR] = imx_clk_hw_gate("usb_xbar", "xbar_divbus", base + 0x50, 30);
+	clks[IMX8ULP_CLK_ENET] = imx8ulp_clk_hw_composite("enet", nic_per_divplat, 1, false, false, true, base + 0x54, 1);
+	clks[IMX8ULP_CLK_RGPIOE] = imx_clk_hw_gate("rgpioe", "nic_per_divplat", base + 0x78, 30);
+	clks[IMX8ULP_CLK_RGPIOF] = imx_clk_hw_gate("rgpiof", "nic_per_divplat", base + 0x7c, 30);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+}
+
+static int imx8ulp_clk_pcc5_init(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_PCC5_END),
+			   GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8ULP_CLK_PCC5_END;
+	clks = clk_data->hws;
+
+	/* PCC5 */
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (WARN_ON(IS_ERR(base)))
+		return PTR_ERR(base);
+
+	clks[IMX8ULP_CLK_DMA2_MP] = imx_clk_hw_gate("pcc_dma2_mp", "lpav_axi_div", base + 0x0, 30);
+	clks[IMX8ULP_CLK_DMA2_CH0] = imx_clk_hw_gate("pcc_dma2_ch0", "lpav_axi_div", base + 0x4, 30);
+	clks[IMX8ULP_CLK_DMA2_CH1] = imx_clk_hw_gate("pcc_dma2_ch1", "lpav_axi_div", base + 0x8, 30);
+	clks[IMX8ULP_CLK_DMA2_CH2] = imx_clk_hw_gate("pcc_dma2_ch2", "lpav_axi_div", base + 0xc, 30);
+	clks[IMX8ULP_CLK_DMA2_CH3] = imx_clk_hw_gate("pcc_dma2_ch3", "lpav_axi_div", base + 0x10, 30);
+	clks[IMX8ULP_CLK_DMA2_CH4] = imx_clk_hw_gate("pcc_dma2_ch4", "lpav_axi_div", base + 0x14, 30);
+	clks[IMX8ULP_CLK_DMA2_CH5] = imx_clk_hw_gate("pcc_dma2_ch5", "lpav_axi_div", base + 0x18, 30);
+	clks[IMX8ULP_CLK_DMA2_CH6] = imx_clk_hw_gate("pcc_dma2_ch6", "lpav_axi_div", base + 0x1c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH7] = imx_clk_hw_gate("pcc_dma2_ch7", "lpav_axi_div", base + 0x20, 30);
+	clks[IMX8ULP_CLK_DMA2_CH8] = imx_clk_hw_gate("pcc_dma2_ch8", "lpav_axi_div", base + 0x24, 30);
+	clks[IMX8ULP_CLK_DMA2_CH9] = imx_clk_hw_gate("pcc_dma2_ch9", "lpav_axi_div", base + 0x28, 30);
+	clks[IMX8ULP_CLK_DMA2_CH10] = imx_clk_hw_gate("pcc_dma2_ch10", "lpav_axi_div", base + 0x2c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH11] = imx_clk_hw_gate("pcc_dma2_ch11", "lpav_axi_div", base + 0x30, 30);
+	clks[IMX8ULP_CLK_DMA2_CH12] = imx_clk_hw_gate("pcc_dma2_ch12", "lpav_axi_div", base + 0x34, 30);
+	clks[IMX8ULP_CLK_DMA2_CH13] = imx_clk_hw_gate("pcc_dma2_ch13", "lpav_axi_div", base + 0x38, 30);
+	clks[IMX8ULP_CLK_DMA2_CH14] = imx_clk_hw_gate("pcc_dma2_ch14", "lpav_axi_div", base + 0x3c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH15] = imx_clk_hw_gate("pcc_dma2_ch15", "lpav_axi_div", base + 0x40, 30);
+	clks[IMX8ULP_CLK_DMA2_CH16] = imx_clk_hw_gate("pcc_dma2_ch16", "lpav_axi_div", base + 0x44, 30);
+	clks[IMX8ULP_CLK_DMA2_CH17] = imx_clk_hw_gate("pcc_dma2_ch17", "lpav_axi_div", base + 0x48, 30);
+	clks[IMX8ULP_CLK_DMA2_CH18] = imx_clk_hw_gate("pcc_dma2_ch18", "lpav_axi_div", base + 0x4c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH19] = imx_clk_hw_gate("pcc_dma2_ch19", "lpav_axi_div", base + 0x50, 30);
+	clks[IMX8ULP_CLK_DMA2_CH20] = imx_clk_hw_gate("pcc_dma2_ch20", "lpav_axi_div", base + 0x54, 30);
+	clks[IMX8ULP_CLK_DMA2_CH21] = imx_clk_hw_gate("pcc_dma2_ch21", "lpav_axi_div", base + 0x58, 30);
+	clks[IMX8ULP_CLK_DMA2_CH22] = imx_clk_hw_gate("pcc_dma2_ch22", "lpav_axi_div", base + 0x5c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH23] = imx_clk_hw_gate("pcc_dma2_ch23", "lpav_axi_div", base + 0x60, 30);
+	clks[IMX8ULP_CLK_DMA2_CH24] = imx_clk_hw_gate("pcc_dma2_ch24", "lpav_axi_div", base + 0x64, 30);
+	clks[IMX8ULP_CLK_DMA2_CH25] = imx_clk_hw_gate("pcc_dma2_ch25", "lpav_axi_div", base + 0x68, 30);
+	clks[IMX8ULP_CLK_DMA2_CH26] = imx_clk_hw_gate("pcc_dma2_ch26", "lpav_axi_div", base + 0x6c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH27] = imx_clk_hw_gate("pcc_dma2_ch27", "lpav_axi_div", base + 0x70, 30);
+	clks[IMX8ULP_CLK_DMA2_CH28] = imx_clk_hw_gate("pcc_dma2_ch28", "lpav_axi_div", base + 0x74, 30);
+	clks[IMX8ULP_CLK_DMA2_CH29] = imx_clk_hw_gate("pcc_dma2_ch29", "lpav_axi_div", base + 0x78, 30);
+	clks[IMX8ULP_CLK_DMA2_CH30] = imx_clk_hw_gate("pcc_dma2_ch30", "lpav_axi_div", base + 0x7c, 30);
+	clks[IMX8ULP_CLK_DMA2_CH31] = imx_clk_hw_gate("pcc_dma2_ch31", "lpav_axi_div", base + 0x80, 30);
+
+	clks[IMX8ULP_CLK_AVD_SIM] = imx_clk_hw_gate("avd_sim", "lpav_bus_div", base + 0x94, 30);
+	clks[IMX8ULP_CLK_TPM8] = imx8ulp_clk_hw_composite("tpm8", pcc5_periph_bus_sels, ARRAY_SIZE(pcc5_periph_bus_sels), true, true, true, base + 0xa0, 1);
+	clks[IMX8ULP_CLK_MU2_B] = imx_clk_hw_gate("mu2_b", "lpav_bus_div", base + 0x84, 30);
+	clks[IMX8ULP_CLK_MU3_B] = imx_clk_hw_gate("mu3_b", "lpav_bus_div", base + 0x88, 30);
+	clks[IMX8ULP_CLK_SAI6] = imx8ulp_clk_hw_composite("sai6", lpav_bus_div, 1, false, false, true, base + 0xa4, 1);
+	clks[IMX8ULP_CLK_SAI7] = imx8ulp_clk_hw_composite("sai7", lpav_bus_div, 1, false, false, true, base + 0xa8, 1);
+	clks[IMX8ULP_CLK_SPDIF] = imx8ulp_clk_hw_composite("spdif", lpav_bus_div, 1, false, false, true, base + 0xac, 1);
+	clks[IMX8ULP_CLK_ISI] = imx8ulp_clk_hw_composite("isi", lpav_axi_div, 1, false, false, true, base + 0xb0, 1);
+	clks[IMX8ULP_CLK_CSI_REGS] = imx8ulp_clk_hw_composite("csi_regs", lpav_bus_div, 1, false, false, true, base + 0xb4, 1);
+	clks[IMX8ULP_CLK_CSI] = imx8ulp_clk_hw_composite("csi", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xbc, 1);
+	clks[IMX8ULP_CLK_DSI] = imx8ulp_clk_hw_composite("dsi", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xc0, 1);
+	clks[IMX8ULP_CLK_WDOG5] = imx8ulp_clk_hw_composite("wdog5", pcc5_periph_bus_sels, ARRAY_SIZE(pcc5_periph_bus_sels), true, true, true, base + 0xc8, 1);
+	clks[IMX8ULP_CLK_EPDC] = imx8ulp_clk_hw_composite("epdc", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xcc, 1);
+	clks[IMX8ULP_CLK_PXP] = imx8ulp_clk_hw_composite("pxp", lpav_axi_div, 1, false, false, true, base + 0xd0, 1);
+	clks[IMX8ULP_CLK_GPU2D] = imx8ulp_clk_hw_composite("gpu2d", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xf0, 1);
+	clks[IMX8ULP_CLK_GPU3D] = imx8ulp_clk_hw_composite("gpu3d", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xf4, 1);
+	clks[IMX8ULP_CLK_DC_NANO] = imx8ulp_clk_hw_composite("dc_nano", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0xf8, 1);
+	clks[IMX8ULP_CLK_CSI_CLK_UI] = imx8ulp_clk_hw_composite("csi_clk_ui", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0x10c, 1);
+	clks[IMX8ULP_CLK_CSI_CLK_ESC] = imx8ulp_clk_hw_composite("csi_clk_esc", pcc5_periph_plat_sels, ARRAY_SIZE(pcc5_periph_plat_sels), true, true, true, base + 0x110, 1);
+	clks[IMX8ULP_CLK_RGPIOD] = imx_clk_hw_gate("rgpiod", "lpav_axi_div", base + 0x114, 30);
+	clks[IMX8ULP_CLK_DSI_TX_ESC] = imx_clk_hw_fixed_factor("mipi_dsi_tx_esc", "dsi", 1, 4);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+}
+
+static int imx8ulp_clk_probe(struct platform_device *pdev)
+{
+	int (*probe)(struct platform_device *pdev);
+
+	probe = of_device_get_match_data(&pdev->dev);
+
+	if (probe)
+		return probe(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id imx8ulp_clk_dt_ids[] = {
+	{ .compatible = "fsl,imx8ulp-pcc3", .data = imx8ulp_clk_pcc3_init },
+	{ .compatible = "fsl,imx8ulp-pcc4", .data = imx8ulp_clk_pcc4_init },
+	{ .compatible = "fsl,imx8ulp-pcc5", .data = imx8ulp_clk_pcc5_init },
+	{ .compatible = "fsl,imx8ulp-cgc2", .data = imx8ulp_clk_cgc2_init },
+	{ .compatible = "fsl,imx8ulp-cgc1", .data = imx8ulp_clk_cgc1_init },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8ulp_clk_dt_ids);
+
+static struct platform_driver imx8ulp_clk_driver = {
+	.probe	= imx8ulp_clk_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= imx8ulp_clk_dt_ids,
+	},
+};
+module_platform_driver(imx8ulp_clk_driver);
+
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_DESCRIPTION("NXP i.MX8ULP clock driver");
+MODULE_LICENSE("GPL v2");
-- 
2.26.2

[PATCH 9/9] clk: imx: Add the pcc reset controller support on imx8ulp

[Jacky Bai]

On i.MX8ULP, for some of the PCCs, it has a peripheral SW RST bit
resides in the same registers as the clock controller. So add this
SW RST controller support alongs with the pcc clock initialization.

the reset and clock shared the same register, to avoid  accessing
the same register by reset control and clock control concurrently,
locking is necessary, so reuse the imx_ccm_lock spinlock to simplify
the code.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
---
 drivers/clk/imx/Kconfig              |   1 +
 drivers/clk/imx/clk-composite-7ulp.c |  10 +++
 drivers/clk/imx/clk-imx8ulp.c        | 115 ++++++++++++++++++++++++++-
 3 files changed, 123 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index b81d6437ed95..0d1e3a6ac32a 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -102,5 +102,6 @@ config CLK_IMX8QXP
 config CLK_IMX8ULP
 	tristate "IMX8ULP CCM Clock Driver"
 	depends on ARCH_MXC || COMPILE_TEST
+	select RESET_CONTROLLER
 	help
 	    Build the driver for i.MX8ULP CCM Clock Driver
diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
index 99a36a73dcb5..6cc1b8bb8780 100644
--- a/drivers/clk/imx/clk-composite-7ulp.c
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -28,6 +28,7 @@
 static int pcc_gate_enable(struct clk_hw *hw)
 {
 	struct clk_gate *gate = to_clk_gate(hw);
+	unsigned long flags;
 	u32 val;
 	int ret;
 
@@ -35,6 +36,7 @@ static int pcc_gate_enable(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
+	spin_lock_irqsave(gate->lock, flags);
 	/*
 	 * release the sw reset for peripherals associated with
 	 * with this pcc clock.
@@ -43,6 +45,8 @@ static int pcc_gate_enable(struct clk_hw *hw)
 	val |= SW_RST;
 	writel(val, gate->reg);
 
+	spin_unlock_irqrestore(gate->lock, flags);
+
 	return 0;
 }
 
@@ -83,6 +87,8 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 		mux->reg = reg;
 		mux->shift = PCG_PCS_SHIFT;
 		mux->mask = PCG_PCS_MASK;
+		if (has_swrst)
+			mux->lock = &imx_ccm_lock;
 	}
 
 	if (rate_present) {
@@ -100,6 +106,8 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 		fd->nwidth = PCG_PCD_WIDTH;
 		fd->nmask = PCG_PCD_MASK;
 		fd->flags = CLK_FRAC_DIVIDER_ZERO_BASED;
+		if (has_swrst)
+			fd->lock = &imx_ccm_lock;
 	}
 
 	if (gate_present) {
@@ -112,6 +120,8 @@ static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 		gate_hw = &gate->hw;
 		gate->reg = reg;
 		gate->bit_idx = PCG_CGC_SHIFT;
+		if (has_swrst)
+			gate->lock = &imx_ccm_lock;
 		/*
 		 * make sure clock is gated during clock tree initialization,
 		 * the HW ONLY allow clock parent/rate changed with clock gated,
diff --git a/drivers/clk/imx/clk-imx8ulp.c b/drivers/clk/imx/clk-imx8ulp.c
index 44d7dc105848..909a74d74c6c 100644
--- a/drivers/clk/imx/clk-imx8ulp.c
+++ b/drivers/clk/imx/clk-imx8ulp.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <linux/slab.h>
 
 #include "clk.h"
@@ -48,6 +49,98 @@ static const char * const nic_per_divplat[] = { "nic_per_divplat" };
 static const char * const lpav_axi_div[] = { "lpav_axi_div" };
 static const char * const lpav_bus_div[] = { "lpav_bus_div" };
 
+struct pcc_reset_dev {
+	void __iomem *base;
+	struct reset_controller_dev rcdev;
+	const u32 *resets;
+	spinlock_t *lock;
+};
+
+#define PCC_SW_RST	BIT(28)
+#define to_pcc_reset_dev(_rcdev)	container_of(_rcdev, struct pcc_reset_dev, rcdev)
+
+static const u32 pcc3_resets[] = {
+	0xa8, 0xac, 0xc8, 0xcc, 0xd0,
+	0xd4, 0xd8, 0xdc, 0xe0, 0xe4,
+	0xe8, 0xec, 0xf0
+};
+
+static const u32 pcc4_resets[] = {
+	0x4, 0x8, 0xc, 0x10, 0x14,
+	0x18, 0x1c, 0x20, 0x24, 0x34,
+	0x38, 0x3c, 0x40, 0x44, 0x48,
+	0x4c, 0x54
+};
+
+static const u32 pcc5_resets[] = {
+	0xa0, 0xa4, 0xa8, 0xac, 0xb0,
+	0xb4, 0xbc, 0xc0, 0xc8, 0xcc,
+	0xd0, 0xf0, 0xf4, 0xf8
+};
+
+static int imx8ulp_pcc_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct pcc_reset_dev *pcc_reset = to_pcc_reset_dev(rcdev);
+	u32 offset = pcc_reset->resets[id];
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(pcc_reset->lock, flags);
+
+	val = readl(pcc_reset->base + offset);
+	val &= ~PCC_SW_RST;
+	writel(val, pcc_reset->base + offset);
+
+	spin_unlock_irqrestore(pcc_reset->lock, flags);
+
+	return 0;
+}
+
+static int imx8ulp_pcc_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct pcc_reset_dev *pcc_reset = to_pcc_reset_dev(rcdev);
+	u32 offset = pcc_reset->resets[id];
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(pcc_reset->lock, flags);
+
+	val = readl(pcc_reset->base + offset);
+	val |= PCC_SW_RST;
+	writel(val, pcc_reset->base + offset);
+
+	spin_unlock_irqrestore(pcc_reset->lock, flags);
+
+	return 0;
+}
+
+static const struct reset_control_ops imx8ulp_pcc_reset_ops = {
+	.assert = imx8ulp_pcc_assert,
+	.deassert = imx8ulp_pcc_deassert,
+};
+
+static int imx8ulp_pcc_reset_init(struct platform_device *pdev, void __iomem *base,
+	 const u32 *resets, unsigned int nr_resets)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct pcc_reset_dev *pcc_reset;
+
+	pcc_reset = devm_kzalloc(dev, sizeof(*pcc_reset), GFP_KERNEL);
+	if (!pcc_reset)
+		return -ENOMEM;
+
+	pcc_reset->base = base;
+	pcc_reset->lock = &imx_ccm_lock;
+	pcc_reset->resets = resets;
+	pcc_reset->rcdev.owner = THIS_MODULE;
+	pcc_reset->rcdev.nr_resets = nr_resets;
+	pcc_reset->rcdev.ops = &imx8ulp_pcc_reset_ops;
+	pcc_reset->rcdev.of_node = np;
+
+	return devm_reset_controller_register(dev, &pcc_reset->rcdev);
+}
+
 static int imx8ulp_clk_cgc1_init(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -294,10 +387,13 @@ static int imx8ulp_clk_pcc3_init(struct platform_device *pdev)
 	imx_check_clk_hws(clks, clk_data->num);
 
 	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+	if (ret)
+		return ret;
 
 	imx_register_uart_clocks(1);
 
-	return ret;
+	/* register the pcc3 reset controller */
+	return imx8ulp_pcc_reset_init(pdev, base, pcc3_resets, ARRAY_SIZE(pcc3_resets));
 }
 
 static int imx8ulp_clk_pcc4_init(struct platform_device *pdev)
@@ -306,6 +402,7 @@ static int imx8ulp_clk_pcc4_init(struct platform_device *pdev)
 	struct clk_hw_onecell_data *clk_data;
 	struct clk_hw **clks;
 	void __iomem *base;
+	int ret;
 
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_PCC4_END),
 			   GFP_KERNEL);
@@ -345,7 +442,13 @@ static int imx8ulp_clk_pcc4_init(struct platform_device *pdev)
 
 	imx_check_clk_hws(clks, clk_data->num);
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+	if (ret)
+		return ret;
+
+	/* register the pcc4 reset controller */
+	return imx8ulp_pcc_reset_init(pdev, base, pcc4_resets, ARRAY_SIZE(pcc4_resets));
+
 }
 
 static int imx8ulp_clk_pcc5_init(struct platform_device *pdev)
@@ -354,6 +457,7 @@ static int imx8ulp_clk_pcc5_init(struct platform_device *pdev)
 	struct clk_hw_onecell_data *clk_data;
 	struct clk_hw **clks;
 	void __iomem *base;
+	int ret;
 
 	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, IMX8ULP_CLK_PCC5_END),
 			   GFP_KERNEL);
@@ -426,7 +530,12 @@ static int imx8ulp_clk_pcc5_init(struct platform_device *pdev)
 
 	imx_check_clk_hws(clks, clk_data->num);
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
+	if (ret)
+		return ret;
+
+	/* register the pcc5 reset controller */
+	return imx8ulp_pcc_reset_init(pdev, base, pcc5_resets, ARRAY_SIZE(pcc5_resets));
 }
 
 static int imx8ulp_clk_probe(struct platform_device *pdev)
-- 
2.26.2

Re: [PATCH 9/9] clk: imx: Add the pcc reset controller support on imx8ulp

[Liu Ying]

On Mon, 2021-07-19 at 13:34 +0800, Jacky Bai wrote:
> On i.MX8ULP, for some of the PCCs, it has a peripheral SW RST bit
> resides in the same registers as the clock controller. So add this
> SW RST controller support alongs with the pcc clock initialization.
> 
> the reset and clock shared the same register, to avoid  accessing
> the same register by reset control and clock control concurrently,
> locking is necessary, so reuse the imx_ccm_lock spinlock to simplify
> the code.
> 
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>

For the general idea of adding a reset controller in the clock driver,
you may add my 'Suggested-by: Liu Ying <victor.liu@nxp.com>', just like
the patch in our internal tree does.

Regards,
Liu Ying