linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>
Cc: linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Michael Stapelberg <michael@stapelberg.ch>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 4/5] drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
Date: Wed, 22 Sep 2021 14:54:18 +0200	[thread overview]
Message-ID: <20210922125419.4125779-5-maxime@cerno.tech> (raw)
In-Reply-To: <20210922125419.4125779-1-maxime@cerno.tech>

In order to access the HDMI controller, we need to make sure the HSM
clock is enabled. If we were to access it with the clock disabled, the
CPU would completely hang, resulting in an hard crash.

Since we have different code path that would require it, let's move that
clock enable / disable to runtime_pm that will take care of the
reference counting for us.

Since we also want to change the HSM clock rate and it's only valid
while the clock is disabled, we need to move the clk_set_min_rate() call
on the HSM clock above pm_runtime_get_and_sync().

Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 72 ++++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 74222b12f8c8..630b84ab73a2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -628,7 +628,6 @@ static void vc4_hdmi_encoder_post_crtc_powerdown(struct drm_encoder *encoder,
 		vc4_hdmi->variant->phy_disable(vc4_hdmi);
 
 	clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
-	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	clk_disable_unprepare(vc4_hdmi->pixel_clock);
 
 	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
@@ -894,28 +893,10 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		conn_state_to_vc4_hdmi_conn_state(conn_state);
 	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	unsigned long bvb_rate, pixel_rate, hsm_rate;
+	unsigned long pixel_rate = vc4_conn_state->pixel_rate;
+	unsigned long bvb_rate, hsm_rate;
 	int ret;
 
-	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
-	if (ret < 0) {
-		DRM_ERROR("Failed to retain power domain: %d\n", ret);
-		return;
-	}
-
-	pixel_rate = vc4_conn_state->pixel_rate;
-	ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
-	if (ret) {
-		DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
-		return;
-	}
-
-	ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
-	if (ret) {
-		DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
-		return;
-	}
-
 	/*
 	 * As stated in RPi's vc4 firmware "HDMI state machine (HSM) clock must
 	 * be faster than pixel clock, infinitesimally faster, tested in
@@ -939,10 +920,21 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 		return;
 	}
 
-	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret < 0) {
+		DRM_ERROR("Failed to retain power domain: %d\n", ret);
+		return;
+	}
+
+	ret = clk_set_rate(vc4_hdmi->pixel_clock, pixel_rate);
 	if (ret) {
-		DRM_ERROR("Failed to turn on HSM clock: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->pixel_clock);
+		DRM_ERROR("Failed to set pixel clock rate: %d\n", ret);
+		return;
+	}
+
+	ret = clk_prepare_enable(vc4_hdmi->pixel_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on pixel clock: %d\n", ret);
 		return;
 	}
 
@@ -958,7 +950,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -966,7 +957,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
 	ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
 	if (ret) {
 		DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
-		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -2107,6 +2097,29 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int vc4_hdmi_runtime_suspend(struct device *dev)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(vc4_hdmi->hsm_clock);
+
+	return 0;
+}
+
+static int vc4_hdmi_runtime_resume(struct device *dev)
+{
+	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
+
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
 	const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
@@ -2374,11 +2387,18 @@ static const struct of_device_id vc4_hdmi_dt_match[] = {
 	{}
 };
 
+static const struct dev_pm_ops vc4_hdmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(vc4_hdmi_runtime_suspend,
+			   vc4_hdmi_runtime_resume,
+			   NULL)
+};
+
 struct platform_driver vc4_hdmi_driver = {
 	.probe = vc4_hdmi_dev_probe,
 	.remove = vc4_hdmi_dev_remove,
 	.driver = {
 		.name = "vc4_hdmi",
 		.of_match_table = vc4_hdmi_dt_match,
+		.pm = &vc4_hdmi_pm_ops,
 	},
 };
-- 
2.31.1


  parent reply	other threads:[~2021-09-22 12:54 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-22 12:54 [PATCH 0/5] drm/vc4: hdmi: Remove CPU hangs, take 2 Maxime Ripard
2021-09-22 12:54 ` [PATCH 1/5] clk: bcm-2835: Pick the closest clock rate Maxime Ripard
2021-09-28 16:26   ` nicolas saenz julienne
2021-09-30 18:08   ` Stephen Boyd
2021-10-13 12:59   ` (subset) " Maxime Ripard
2021-09-22 12:54 ` [PATCH 2/5] clk: bcm-2835: Remove rounding up the dividers Maxime Ripard
2021-09-28 16:26   ` nicolas saenz julienne
2021-09-29 13:27     ` Maxime Ripard
2021-09-30 18:09   ` Stephen Boyd
2021-10-13 12:59   ` (subset) " Maxime Ripard
2021-09-22 12:54 ` [PATCH 3/5] drm/vc4: hdmi: Set a default HSM rate Maxime Ripard
2021-09-30 15:51   ` nicolas saenz julienne
2021-10-13 12:59   ` (subset) " Maxime Ripard
2021-09-22 12:54 ` Maxime Ripard [this message]
2021-09-30 15:54   ` [PATCH 4/5] drm/vc4: hdmi: Move the HSM clock enable to runtime_pm nicolas saenz julienne
2021-10-13 12:59   ` (subset) " Maxime Ripard
2021-09-22 12:54 ` [PATCH 5/5] drm/vc4: hdmi: Make sure the controller is powered in detect Maxime Ripard
2021-09-30 15:55   ` nicolas saenz julienne
2021-10-13 12:59   ` (subset) " Maxime Ripard
     [not found] ` <CANnVG6kFC7q_dDDp4rRZsJz=paHKy2STn9127LE=JJOf2kW2TA@mail.gmail.com>
2021-09-23  7:05   ` [PATCH 0/5] drm/vc4: hdmi: Remove CPU hangs, take 2 Michael Stapelberg
2021-09-24  7:40 ` Maxime Ripard
2021-09-28 13:05   ` Maxime Ripard
2021-09-30 18:09     ` Stephen Boyd
2021-09-30 18:39       ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210922125419.4125779-5-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=michael@stapelberg.ch \
    --cc=mturquette@baylibre.com \
    --cc=nsaenz@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).