linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
To: "Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Andreas Färber" <afaerber@suse.de>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Edgar Bernardi Righi" <edgar.righi@lsitec.org.br>
Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
Date: Mon,  8 Mar 2021 19:18:29 +0200	[thread overview]
Message-ID: <58225ced4893018792d581c0476a0f1c70e08907.1615221459.git.cristian.ciocaltea@gmail.com> (raw)
In-Reply-To: <cover.1615221459.git.cristian.ciocaltea@gmail.com>

There are a few issues with the setup of the Actions Semi Owl S500 SoC's
clock chain involving AHPPREDIV, H and AHB clocks:

* AHBPREDIV clock is defined as a muxer only, although it also acts as
  a divider.
* H clock is defined as a standard divider, although the raw value zero
  is not supported.
* AHB is defined as a multi-rate factor clock, but it is actually just
  a fixed pass clock.

Let's provide the following fixes:

* Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
* Add a clock div table 'h_div_table' for the H clock to drop the
  unsupported 0 rate and use the correct register shift value in the
  OWL_DIVIDER definition.
* Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
  ungated OWL_COMP_FIXED_FACTOR definition.

Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
 drivers/clk/actions/owl-s500.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
index abe8874353de..b9e434173b4f 100644
--- a/drivers/clk/actions/owl-s500.c
+++ b/drivers/clk/actions/owl-s500.c
@@ -151,9 +151,9 @@ static struct clk_factor_table hde_factor_table[] = {
 	{ 0, 0, 0 },
 };
 
-static struct clk_factor_table ahb_factor_table[] = {
-	{ 1, 1, 2 }, { 2, 1, 3 },
-	{ 0, 0, 0 },
+static struct clk_div_table h_div_table[] = {
+	{ 1, 2 }, { 2, 3 }, { 3, 4 },
+	{ 0, 0 },
 };
 
 static struct clk_div_table rmii_ref_div_table[] = {
@@ -184,7 +184,6 @@ static struct clk_div_table nand_div_table[] = {
 
 /* mux clock */
 static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT);
-static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
 
 /* gate clocks */
 static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
@@ -197,16 +196,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
 static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
 
 /* divider clocks */
-static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
+static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, h_div_table, 0, 0);
 static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
 static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
 
 /* factor clocks */
-static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0);
 static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0);
 static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
 
 /* composite clocks */
+static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
+			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
+			{ 0 },
+			OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL),
+			0);
+
+static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk",
+			{ 0 },
+			1, 1, CLK_SET_RATE_PARENT);
+
 static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p,
 			OWL_MUX_HW(CMU_VCECLK, 4, 2),
 			OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
-- 
2.30.1


  parent reply	other threads:[~2021-03-08 17:19 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-08 17:18 [PATCH 0/6] Improve clock support for Actions S500 SoC Cristian Ciocaltea
2021-03-08 17:18 ` [PATCH 1/6] clk: actions: Fix UART clock dividers on Owl " Cristian Ciocaltea
2021-03-16  3:50   ` Manivannan Sadhasivam
2021-03-08 17:18 ` [PATCH 2/6] clk: actions: Fix SD clocks factor table " Cristian Ciocaltea
2021-03-16  3:58   ` Manivannan Sadhasivam
2021-03-16 18:14     ` Cristian Ciocaltea
2021-05-26 10:07       ` Manivannan Sadhasivam
2021-05-27 13:27         ` Cristian Ciocaltea
2021-03-08 17:18 ` [PATCH 3/6] clk: actions: Fix bisp_factor_table based clocks " Cristian Ciocaltea
2021-03-16  4:17   ` Manivannan Sadhasivam
2021-03-16 18:37     ` Cristian Ciocaltea
2021-05-26 10:18       ` Manivannan Sadhasivam
2021-05-27 13:34         ` Cristian Ciocaltea
2021-03-08 17:18 ` Cristian Ciocaltea [this message]
2021-03-16  5:45   ` [PATCH 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain " Manivannan Sadhasivam
2021-03-16 18:50     ` Cristian Ciocaltea
2021-05-26 10:12       ` Manivannan Sadhasivam
2021-05-27 13:45         ` Cristian Ciocaltea
2021-03-08 17:18 ` [PATCH 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions " Cristian Ciocaltea
2021-03-16 22:00   ` Rob Herring
2021-03-08 17:18 ` [PATCH 6/6] clk: actions: Add NIC and ETHERNET clock support " Cristian Ciocaltea
2021-03-16  5:52   ` Manivannan Sadhasivam
2021-03-16 19:02     ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58225ced4893018792d581c0476a0f1c70e08907.1615221459.git.cristian.ciocaltea@gmail.com \
    --to=cristian.ciocaltea@gmail.com \
    --cc=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=edgar.righi@lsitec.org.br \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).