[PATCH v3 0/6] Add CPU clock support for Armada 7K/8K

[PATCH v3 0/6] Add CPU clock support for Armada 7K/8K

[Gregory CLEMENT]

Hello,

This is the third version of a series allowing to manage the cpu
clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
by cluster, so actually the clock management is done at cluster level.

As for the other Armada 7K/8K clocks it is possible to have multiple
AP so here again we need to have unique name: the purpose of the second
patch is to share a common code which will be used in 3 drivers.

The last 2 patch enable the driver at dt and platform level and will
be applied through the mvebu subsystem.

Changelog v2->v3:
 - Add back the first patch documenting the binding

Changelog v1->v2:
 - Header cleanup
 - Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
 - Use clk_hw instead of clk
 - Use regmap_read_poll_timeout
 - Use for_each_of_cpu_node
 - Remove unnecessary WARN_ON()
 - Remove headers from armada_ap_cp_helper.h
 - Few other minor cleanup

Gregory CLEMENT (6):
  dt-bindings: ap806: add the cluster clock node in the syscon file
  clk: mvebu: add helper file for Armada AP and CP clocks
  clk: mvebu: add CPU clock driver for Armada 7K/8K
  clk: mvebu: ap806: Fix clock name for the cluster
  arm64: marvell: enable the  Armada 7K/8K CPU clk driver
  arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

 .../arm/marvell/ap806-system-controller.txt   |  22 ++
 arch/arm64/Kconfig.platforms                  |   1 +
 .../boot/dts/marvell/armada-ap806-quad.dtsi   |   4 +
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi |   6 +
 drivers/clk/mvebu/Kconfig                     |   8 +
 drivers/clk/mvebu/Makefile                    |   2 +
 drivers/clk/mvebu/ap-cpu-clk.c                | 259 ++++++++++++++++++
 drivers/clk/mvebu/ap806-system-controller.c   |  24 +-
 drivers/clk/mvebu/armada_ap_cp_helper.c       |  30 ++
 drivers/clk/mvebu/armada_ap_cp_helper.h       |  11 +
 drivers/clk/mvebu/cp110-system-controller.c   |  32 +--
 11 files changed, 357 insertions(+), 42 deletions(-)
 create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h

-- 
2.19.2

[PATCH v3 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file

[Gregory CLEMENT]

Document the device tree binding for the cluster clock controllers found
in the Armada 7K/8K SoCs.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 .../arm/marvell/ap806-system-controller.txt   | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
index 3fd21bb7cb37..8f281816a6b8 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
@@ -136,3 +136,25 @@ ap_syscon1: system-controller@6f8000 {
 		#thermal-sensor-cells = <1>;
 	};
 };
+
+Cluster clocks:
+---------------
+
+Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
+cluster contain up to 2 CPUs running at the same frequency.
+
+Required properties:
+- compatible: must be  "marvell,ap806-cpu-clock";
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parents clock phandle for the clock.
+
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	cpu_clk: clock-cpu {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+	};
+};
-- 
2.19.2

Re: [PATCH v3 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file

[Rob Herring]

On Sun, Dec 16, 2018 at 10:41:42AM +0100, Gregory CLEMENT wrote:
> Document the device tree binding for the cluster clock controllers found
> in the Armada 7K/8K SoCs.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ---
>  .../arm/marvell/ap806-system-controller.txt   | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> index 3fd21bb7cb37..8f281816a6b8 100644
> --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
> @@ -136,3 +136,25 @@ ap_syscon1: system-controller@6f8000 {
>  		#thermal-sensor-cells = <1>;
>  	};
>  };
> +
> +Cluster clocks:
> +---------------
> +
> +Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
> +cluster contain up to 2 CPUs running at the same frequency.
> +
> +Required properties:
> +- compatible: must be  "marvell,ap806-cpu-clock";
> +- #clock-cells : should be set to 1.
> +- clocks : shall be the input parents clock phandle for the clock.
> +
> +ap_syscon1: system-controller@6f8000 {
> +	compatible = "syscon", "simple-mfd";
> +	reg = <0x6f8000 0x1000>;
> +
> +	cpu_clk: clock-cpu {

There's not a register address range you can use even if Linux happens 
to not need it (currently)?

There's already a clock node under this syscon? Are they really separate 
sub-blocks?

> +		compatible = "marvell,ap806-cpu-clock";
> +		clocks = <&ap_clk 0>, <&ap_clk 1>;
> +		#clock-cells = <1>;
> +	};
> +};
> -- 
> 2.19.2
> 

Re: [PATCH v3 1/6] dt-bindings: ap806: add the cluster clock node in the syscon file

[Gregory CLEMENT]

Hi Rob,
 
 On lun., déc. 17 2018, Rob Herring <robh@kernel.org> wrote:

> On Sun, Dec 16, 2018 at 10:41:42AM +0100, Gregory CLEMENT wrote:
>> Document the device tree binding for the cluster clock controllers found
>> in the Armada 7K/8K SoCs.
>> 
>> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
>> ---
>>  .../arm/marvell/ap806-system-controller.txt   | 22 +++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>> 
>> diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
>> index 3fd21bb7cb37..8f281816a6b8 100644
>> --- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
>> +++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
>> @@ -136,3 +136,25 @@ ap_syscon1: system-controller@6f8000 {
>>  		#thermal-sensor-cells = <1>;
>>  	};
>>  };
>> +
>> +Cluster clocks:
>> +---------------
>> +
>> +Device Tree Clock bindings for cluster clock of AP806 Marvell. Each
>> +cluster contain up to 2 CPUs running at the same frequency.
>> +
>> +Required properties:
>> +- compatible: must be  "marvell,ap806-cpu-clock";
>> +- #clock-cells : should be set to 1.
>> +- clocks : shall be the input parents clock phandle for the clock.
>> +
>> +ap_syscon1: system-controller@6f8000 {
>> +	compatible = "syscon", "simple-mfd";
>> +	reg = <0x6f8000 0x1000>;
>> +
>> +	cpu_clk: clock-cpu {
>
> There's not a register address range you can use even if Linux happens 
> to not need it (currently)?

We can add an optional reg property if you want, but the whole point of
this, is to be able to ensure the compatibility. Indeed, we have now
enough experience to know that the information we have from the
datasheet is incomplete. And when we start to deal with an IP calling
"system controller", then we can expect a mix between all the registers.

>
> There's already a clock node under this syscon? Are they really separate 
> sub-blocks?

Actually the other clock node (marvell,ap806-clock) is under the other
syscon: system controller 0 with gpio and pinctrl, whereas this one
(marvell,ap806-cpu-clock), is under system controller 1 with thermal.

Gregory

>
>> +		compatible = "marvell,ap806-cpu-clock";
>> +		clocks = <&ap_clk 0>, <&ap_clk 1>;
>> +		#clock-cells = <1>;
>> +	};
>> +};
>> -- 
>> 2.19.2
>> 

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

[PATCH v3 2/6] clk: mvebu: add helper file for Armada AP and CP clocks

[Gregory CLEMENT]

Clock drivers for Armada AP and Armada CP use the same function to
generate unique clock name. A third drivers is coming with the same
need, so it's time to move this function in a common file.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/clk/mvebu/Kconfig                   |  5 ++++
 drivers/clk/mvebu/Makefile                  |  1 +
 drivers/clk/mvebu/ap806-system-controller.c | 24 ++++------------
 drivers/clk/mvebu/armada_ap_cp_helper.c     | 30 +++++++++++++++++++
 drivers/clk/mvebu/armada_ap_cp_helper.h     | 11 +++++++
 drivers/clk/mvebu/cp110-system-controller.c | 32 ++++++---------------
 6 files changed, 61 insertions(+), 42 deletions(-)
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
 create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h

diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index fddc8ac5faff..5492fae3f0ab 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -7,6 +7,9 @@ config MVEBU_CLK_CPU
 config MVEBU_CLK_COREDIV
 	bool
 
+config ARMADA_AP_CP_HELPER
+	bool
+
 config ARMADA_370_CLK
 	bool
 	select MVEBU_CLK_COMMON
@@ -34,9 +37,11 @@ config ARMADA_XP_CLK
 
 config ARMADA_AP806_SYSCON
 	bool
+	select ARMADA_AP_CP_HELPER
 
 config ARMADA_CP110_SYSCON
 	bool
+	select ARMADA_AP_CP_HELPER
 
 config DOVE_CLK
 	bool
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index 93ac3685271f..6638ad962ec1 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_MVEBU_CLK_COMMON)	+= common.o
 obj-$(CONFIG_MVEBU_CLK_CPU) 	+= clk-cpu.o
 obj-$(CONFIG_MVEBU_CLK_COREDIV)	+= clk-corediv.o
+obj-$(CONFIG_ARMADA_AP_CP_HELPER) += armada_ap_cp_helper.o
 
 obj-$(CONFIG_ARMADA_370_CLK)	+= armada-370.o
 obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index ea54a874bbda..0a58824ff053 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -10,11 +10,11 @@
 
 #define pr_fmt(fmt) "ap806-system-controller: " fmt
 
+#include "armada_ap_cp_helper.h"
 #include <linux/clk-provider.h>
 #include <linux/mfd/syscon.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
@@ -30,18 +30,6 @@ static struct clk_onecell_data ap806_clk_data = {
 	.clk_num = AP806_CLK_NUM,
 };
 
-static char *ap806_unique_name(struct device *dev, struct device_node *np,
-			       char *name)
-{
-	const __be32 *reg;
-	u64 addr;
-
-	reg = of_get_property(np, "reg", NULL);
-	addr = of_translate_address(np, reg);
-	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
-			(unsigned long long)addr, name);
-}
-
 static int ap806_syscon_common_probe(struct platform_device *pdev,
 				     struct device_node *syscon_node)
 {
@@ -109,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	cpuclk_freq *= 1000 * 1000;
 
 	/* CPU clocks depend on the Sample At Reset configuration */
-	name = ap806_unique_name(dev, syscon_node, "cpu-cluster-0");
+	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -117,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 		goto fail0;
 	}
 
-	name = ap806_unique_name(dev, syscon_node, "cpu-cluster-1");
+	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
@@ -126,7 +114,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* Fixed clock is always 1200 Mhz */
-	fixedclk_name = ap806_unique_name(dev, syscon_node, "fixed");
+	fixedclk_name = ap_cp_unique_name(dev, syscon_node, "fixed");
 	ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
 						0, 1200 * 1000 * 1000);
 	if (IS_ERR(ap806_clks[2])) {
@@ -135,7 +123,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* MSS Clock is fixed clock divided by 6 */
-	name = ap806_unique_name(dev, syscon_node, "mss");
+	name = ap_cp_unique_name(dev, syscon_node, "mss");
 	ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name,
 						  0, 1, 6);
 	if (IS_ERR(ap806_clks[3])) {
@@ -144,7 +132,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	}
 
 	/* SDIO(/eMMC) Clock is fixed clock divided by 3 */
-	name = ap806_unique_name(dev, syscon_node, "sdio");
+	name = ap_cp_unique_name(dev, syscon_node, "sdio");
 	ap806_clks[4] = clk_register_fixed_factor(NULL, name,
 						  fixedclk_name,
 						  0, 1, 3);
diff --git a/drivers/clk/mvebu/armada_ap_cp_helper.c b/drivers/clk/mvebu/armada_ap_cp_helper.c
new file mode 100644
index 000000000000..6a930f697ee5
--- /dev/null
+++ b/drivers/clk/mvebu/armada_ap_cp_helper.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada AP and CP110 helper
+ *
+ * Copyright (C) 2018 Marvell
+ *
+ * Gregory Clement <gregory.clement@bootlin.com>
+ *
+ */
+
+#include "armada_ap_cp_helper.h"
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name)
+{
+	const __be32 *reg;
+	u64 addr;
+
+	/* Do not create a name if there is no clock */
+	if (!name)
+		return NULL;
+
+	reg = of_get_property(np, "reg", NULL);
+	addr = of_translate_address(np, reg);
+	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
+			      (unsigned long long)addr, name);
+}
diff --git a/drivers/clk/mvebu/armada_ap_cp_helper.h b/drivers/clk/mvebu/armada_ap_cp_helper.h
new file mode 100644
index 000000000000..810af1e5dfa4
--- /dev/null
+++ b/drivers/clk/mvebu/armada_ap_cp_helper.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ARMADA_AP_CP_HELPER_H
+#define __ARMADA_AP_CP_HELPER_H
+
+struct device;
+struct device_node;
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name);
+#endif
diff --git a/drivers/clk/mvebu/cp110-system-controller.c b/drivers/clk/mvebu/cp110-system-controller.c
index 9781b1bf5998..e5f6c4b114b0 100644
--- a/drivers/clk/mvebu/cp110-system-controller.c
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -26,11 +26,11 @@
 
 #define pr_fmt(fmt) "cp110-system-controller: " fmt
 
+#include "armada_ap_cp_helper.h"
 #include <linux/clk-provider.h>
 #include <linux/mfd/syscon.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -212,22 +212,6 @@ static struct clk_hw *cp110_of_clk_get(struct of_phandle_args *clkspec,
 	return ERR_PTR(-EINVAL);
 }
 
-static char *cp110_unique_name(struct device *dev, struct device_node *np,
-			       const char *name)
-{
-	const __be32 *reg;
-	u64 addr;
-
-	/* Do not create a name if there is no clock */
-	if (!name)
-		return NULL;
-
-	reg = of_get_property(np, "reg", NULL);
-	addr = of_translate_address(np, reg);
-	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
-			      (unsigned long long)addr, name);
-}
-
 static int cp110_syscon_common_probe(struct platform_device *pdev,
 				     struct device_node *syscon_node)
 {
@@ -261,7 +245,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clk_data->num = CP110_CLK_NUM;
 
 	/* Register the PLL0 which is the root of the hw tree */
-	pll0_name = cp110_unique_name(dev, syscon_node, "pll0");
+	pll0_name = ap_cp_unique_name(dev, syscon_node, "pll0");
 	hw = clk_hw_register_fixed_rate(NULL, pll0_name, NULL, 0,
 					1000 * 1000 * 1000);
 	if (IS_ERR(hw)) {
@@ -272,7 +256,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_PLL0] = hw;
 
 	/* PPv2 is PLL0/3 */
-	ppv2_name = cp110_unique_name(dev, syscon_node, "ppv2-core");
+	ppv2_name = ap_cp_unique_name(dev, syscon_node, "ppv2-core");
 	hw = clk_hw_register_fixed_factor(NULL, ppv2_name, pll0_name, 0, 1, 3);
 	if (IS_ERR(hw)) {
 		ret = PTR_ERR(hw);
@@ -282,7 +266,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_PPV2] = hw;
 
 	/* X2CORE clock is PLL0/2 */
-	x2core_name = cp110_unique_name(dev, syscon_node, "x2core");
+	x2core_name = ap_cp_unique_name(dev, syscon_node, "x2core");
 	hw = clk_hw_register_fixed_factor(NULL, x2core_name, pll0_name,
 					  0, 1, 2);
 	if (IS_ERR(hw)) {
@@ -293,7 +277,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_X2CORE] = hw;
 
 	/* Core clock is X2CORE/2 */
-	core_name = cp110_unique_name(dev, syscon_node, "core");
+	core_name = ap_cp_unique_name(dev, syscon_node, "core");
 	hw = clk_hw_register_fixed_factor(NULL, core_name, x2core_name,
 					  0, 1, 2);
 	if (IS_ERR(hw)) {
@@ -303,7 +287,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 
 	cp110_clks[CP110_CORE_CORE] = hw;
 	/* NAND can be either PLL0/2.5 or core clock */
-	nand_name = cp110_unique_name(dev, syscon_node, "nand-core");
+	nand_name = ap_cp_unique_name(dev, syscon_node, "nand-core");
 	if (nand_clk_ctrl & NF_CLOCK_SEL_400_MASK)
 		hw = clk_hw_register_fixed_factor(NULL, nand_name,
 						   pll0_name, 0, 2, 5);
@@ -318,7 +302,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 	cp110_clks[CP110_CORE_NAND] = hw;
 
 	/* SDIO clock is PLL0/2.5 */
-	sdio_name = cp110_unique_name(dev, syscon_node, "sdio-core");
+	sdio_name = ap_cp_unique_name(dev, syscon_node, "sdio-core");
 	hw = clk_hw_register_fixed_factor(NULL, sdio_name,
 					  pll0_name, 0, 2, 5);
 	if (IS_ERR(hw)) {
@@ -330,7 +314,7 @@ static int cp110_syscon_common_probe(struct platform_device *pdev,
 
 	/* create the unique name for all the gate clocks */
 	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++)
-		gate_name[i] =	cp110_unique_name(dev, syscon_node,
+		gate_name[i] =	ap_cp_unique_name(dev, syscon_node,
 						  gate_base_names[i]);
 
 	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++) {
-- 
2.19.2

[PATCH v3 3/6] clk: mvebu: add CPU clock driver for Armada 7K/8K

[Gregory CLEMENT]

The CPU frequency is managed at the AP level for the Armada 7K/8K. The
CPU frequency is modified by cluster: the CPUs of the same cluster have
the same frequency.

This patch adds the clock driver that will be used by CPUFreq, it is
based on the work of Omri Itach <omrii@marvell.com>.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/clk/mvebu/Kconfig      |   3 +
 drivers/clk/mvebu/Makefile     |   1 +
 drivers/clk/mvebu/ap-cpu-clk.c | 259 +++++++++++++++++++++++++++++++++
 3 files changed, 263 insertions(+)
 create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c

diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 5492fae3f0ab..9d0b2f7cee21 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -39,6 +39,9 @@ config ARMADA_AP806_SYSCON
 	bool
 	select ARMADA_AP_CP_HELPER
 
+config ARMADA_AP_CPU_CLK
+	bool
+
 config ARMADA_CP110_SYSCON
 	bool
 	select ARMADA_AP_CP_HELPER
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index 6638ad962ec1..04464cef0f06 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-tbg.o
 obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-periph.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o mv98dx3236.o
 obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
+obj-$(CONFIG_ARMADA_AP_CPU_CLK) += ap-cpu-clk.o
 obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o dove-divider.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
diff --git a/drivers/clk/mvebu/ap-cpu-clk.c b/drivers/clk/mvebu/ap-cpu-clk.c
new file mode 100644
index 000000000000..e4cecb456884
--- /dev/null
+++ b/drivers/clk/mvebu/ap-cpu-clk.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada AP CPU Clock Controller
+ *
+ * Copyright (C) 2018 Marvell
+ *
+ * Omri Itach <omrii@marvell.com>
+ * Gregory Clement <gregory.clement@bootlin.com>
+ */
+
+#define pr_fmt(fmt) "ap-cpu-clk: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "armada_ap_cp_helper.h"
+
+#define AP806_CPU_CLUSTER0		0
+#define AP806_CPU_CLUSTER1		1
+#define AP806_CPUS_PER_CLUSTER		2
+#define APN806_CPU1_MASK		0x1
+
+#define APN806_CLUSTER_NUM_OFFSET	8
+#define APN806_CLUSTER_NUM_MASK		BIT(APN806_CLUSTER_NUM_OFFSET)
+
+#define APN806_MAX_DIVIDER		32
+
+/* AP806 CPU DFS register mapping*/
+#define AP806_CA72MP2_0_PLL_CR_0_REG_OFFSET		0x278
+#define AP806_CA72MP2_0_PLL_CR_1_REG_OFFSET		0x280
+#define AP806_CA72MP2_0_PLL_CR_2_REG_OFFSET		0x284
+#define AP806_CA72MP2_0_PLL_SR_REG_OFFSET		0xC94
+
+#define AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET		0x14
+#define AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET		0
+#define AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK \
+			(0x3f << AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET)
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET	24
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK \
+			(0x1 << AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET)
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET	16
+#define AP806_CA72MP2_0_PLL_RATIO_STATE			11
+
+#define STATUS_POLL_PERIOD_US		1
+#define STATUS_POLL_TIMEOUT_US		1000000
+
+#define to_ap_cpu_clk(_hw) container_of(_hw, struct ap_cpu_clk, hw)
+
+/*
+ * struct ap806_clk: CPU cluster clock controller instance
+ * @cluster: Cluster clock controller index
+ * @clk_name: Cluster clock controller name
+ * @dev : Cluster clock device
+ * @hw: HW specific structure of Cluster clock controller
+ * @pll_cr_base: CA72MP2 Register base (Device Sample at Reset register)
+ */
+struct ap_cpu_clk {
+	unsigned int cluster;
+	const char *clk_name;
+	struct device *dev;
+	struct clk_hw hw;
+	struct regmap *pll_cr_base;
+};
+
+static unsigned long ap_cpu_clk_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct ap_cpu_clk *clk = to_ap_cpu_clk(hw);
+	unsigned int cpu_clkdiv_reg;
+	int cpu_clkdiv_ratio;
+
+	cpu_clkdiv_reg = AP806_CA72MP2_0_PLL_CR_0_REG_OFFSET +
+		(clk->cluster * AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET);
+	regmap_read(clk->pll_cr_base, cpu_clkdiv_reg, &cpu_clkdiv_ratio);
+	cpu_clkdiv_ratio &= AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK;
+	cpu_clkdiv_ratio >>= AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET;
+
+	return parent_rate / cpu_clkdiv_ratio;
+}
+
+static int ap_cpu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct ap_cpu_clk *clk = to_ap_cpu_clk(hw);
+	int ret, reg, divider = parent_rate / rate;
+	unsigned int cpu_clkdiv_reg, cpu_force_reg, cpu_ratio_reg, stable_bit;
+
+	cpu_clkdiv_reg = AP806_CA72MP2_0_PLL_CR_0_REG_OFFSET +
+		(clk->cluster * AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET);
+	cpu_force_reg = AP806_CA72MP2_0_PLL_CR_1_REG_OFFSET +
+		(clk->cluster * AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET);
+	cpu_ratio_reg = AP806_CA72MP2_0_PLL_CR_2_REG_OFFSET +
+		(clk->cluster * AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET);
+
+	regmap_update_bits(clk->pll_cr_base, cpu_clkdiv_reg,
+			   AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK, divider);
+
+	regmap_update_bits(clk->pll_cr_base, cpu_force_reg,
+			   AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK,
+			   AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK);
+
+	regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
+			   BIT(AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET),
+			   BIT(AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET));
+
+	stable_bit = BIT(clk->cluster * AP806_CA72MP2_0_PLL_RATIO_STATE),
+
+	ret = regmap_read_poll_timeout(clk->pll_cr_base,
+				       AP806_CA72MP2_0_PLL_SR_REG_OFFSET, reg,
+				       reg & stable_bit, STATUS_POLL_PERIOD_US,
+				       STATUS_POLL_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
+			   BIT(AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET), 0);
+
+	return 0;
+}
+
+static long ap_cpu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *parent_rate)
+{
+	int divider = *parent_rate / rate;
+
+	divider = min(divider, APN806_MAX_DIVIDER);
+
+	return *parent_rate / divider;
+}
+
+static const struct clk_ops ap_cpu_clk_ops = {
+	.recalc_rate	= ap_cpu_clk_recalc_rate,
+	.round_rate	= ap_cpu_clk_round_rate,
+	.set_rate	= ap_cpu_clk_set_rate,
+};
+
+static int ap_cpu_clock_probe(struct platform_device *pdev)
+{
+	int ret, nclusters = 0, cluster_index = 0;
+	struct device *dev = &pdev->dev;
+	struct device_node *dn, *np = dev->of_node;
+	struct clk_hw_onecell_data *ap_cpu_data;
+	struct ap_cpu_clk *ap_cpu_clk;
+	struct regmap *regmap;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap)) {
+		pr_err("cannot get pll_cr_base regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	/*
+	 * AP806 has 4 cpus and DFS for AP806 is controlled per
+	 * cluster (2 CPUs per cluster), cpu0 and cpu1 are fixed to
+	 * cluster0 while cpu2 and cpu3 are fixed to cluster1 whether
+	 * they are enabled or not.  Since cpu0 is the boot cpu, then
+	 * cluster0 must exist.  If cpu2 or cpu3 is enabled, cluster1
+	 * will exist and the cluster number is 2; otherwise the
+	 * cluster number is 1.
+	 */
+	nclusters = 1;
+	for_each_of_cpu_node(dn) {
+		int cpu, err;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err))
+			return err;
+
+		/* If cpu2 or cpu3 is enabled */
+		if (cpu & APN806_CLUSTER_NUM_MASK) {
+			nclusters = 2;
+			break;
+		}
+	}
+	/*
+	 * DFS for AP806 is controlled per cluster (2 CPUs per cluster),
+	 * so allocate structs per cluster
+	 */
+	ap_cpu_clk = devm_kcalloc(dev, nclusters, sizeof(*ap_cpu_clk),
+				  GFP_KERNEL);
+	if (!ap_cpu_clk)
+		return -ENOMEM;
+
+	ap_cpu_data = devm_kzalloc(dev, sizeof(*ap_cpu_data) +
+				sizeof(struct clk_hw *) * nclusters,
+				GFP_KERNEL);
+	if (!ap_cpu_data)
+		return -ENOMEM;
+
+	for_each_of_cpu_node(dn) {
+		char *clk_name = "cpu-cluster-0";
+		struct clk_init_data init;
+		const char *parent_name;
+		struct clk *parent;
+		int cpu, err;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err))
+			return err;
+
+		cluster_index = cpu & APN806_CLUSTER_NUM_MASK;
+		cluster_index >>= APN806_CLUSTER_NUM_OFFSET;
+
+		/* Initialize once for one cluster */
+		if (ap_cpu_data->hws[cluster_index])
+			continue;
+
+		parent = of_clk_get(np, cluster_index);
+		if (IS_ERR(parent)) {
+			dev_err(dev, "Could not get the clock parent\n");
+			return -EINVAL;
+		}
+		parent_name =  __clk_get_name(parent);
+		clk_name[12] += cluster_index;
+		ap_cpu_clk[cluster_index].clk_name =
+			ap_cp_unique_name(dev, np->parent, clk_name);
+		ap_cpu_clk[cluster_index].cluster = cluster_index;
+		ap_cpu_clk[cluster_index].pll_cr_base = regmap;
+		ap_cpu_clk[cluster_index].hw.init = &init;
+		ap_cpu_clk[cluster_index].dev = dev;
+
+		init.name = ap_cpu_clk[cluster_index].clk_name;
+		init.ops = &ap_cpu_clk_ops;
+		init.num_parents = 1;
+		init.parent_names = &parent_name;
+
+		ret = devm_clk_hw_register(dev, &ap_cpu_clk[cluster_index].hw);
+		if (ret)
+			return ret;
+		ap_cpu_data->hws[cluster_index] = &ap_cpu_clk[cluster_index].hw;
+	}
+
+	ap_cpu_data->num = cluster_index + 1;
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ap_cpu_data);
+	if (ret)
+		dev_err(dev, "failed to register OF clock provider\n");
+
+	return ret;
+}
+
+static const struct of_device_id ap_cpu_clock_of_match[] = {
+	{ .compatible = "marvell,ap806-cpu-clock", },
+	{ }
+};
+
+static struct platform_driver ap_cpu_clock_driver = {
+	.probe = ap_cpu_clock_probe,
+	.driver		= {
+		.name	= "marvell-ap-cpu-clock",
+		.of_match_table = ap_cpu_clock_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ap_cpu_clock_driver);
-- 
2.19.2

[PATCH v3 4/6] clk: mvebu: ap806: Fix clock name for the cluster

[Gregory CLEMENT]

Actually, the clocks exposed for the cluster are not the CPU clocks, but
the PLL clock used as entry clock for the CPU clocks. The CPU clock will
be managed by a driver submitting in the following patches.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 drivers/clk/mvebu/ap806-system-controller.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
index 0a58824ff053..73ba8fd7860f 100644
--- a/drivers/clk/mvebu/ap806-system-controller.c
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -97,7 +97,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 	cpuclk_freq *= 1000 * 1000;
 
 	/* CPU clocks depend on the Sample At Reset configuration */
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-0");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
 	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
 						0, cpuclk_freq);
 	if (IS_ERR(ap806_clks[0])) {
@@ -105,7 +105,7 @@ static int ap806_syscon_common_probe(struct platform_device *pdev,
 		goto fail0;
 	}
 
-	name = ap_cp_unique_name(dev, syscon_node, "cpu-cluster-1");
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
 	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
 						cpuclk_freq);
 	if (IS_ERR(ap806_clks[1])) {
-- 
2.19.2

[PATCH v3 5/6] arm64: marvell: enable the Armada 7K/8K CPU clk driver

[Gregory CLEMENT]

This commit makes sure the driver for the Armada 7K/8K CPU clock is
enabled.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 51bc479334a4..8a05870b1ba8 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -121,6 +121,7 @@ config ARCH_MESON
 
 config ARCH_MVEBU
 	bool "Marvell EBU SoC Family"
+	select ARMADA_AP_CPU_CLK
 	select ARMADA_AP806_SYSCON
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
-- 
2.19.2

[PATCH v3 6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K

[Gregory CLEMENT]

Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 6 ++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 01ea662afba8..c2c81d4e2d38 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,28 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 7d94c1fa592a..a430e884b1a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -263,6 +263,12 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;
-- 
2.19.2

Re: [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K

[Gregory CLEMENT]

Hi Stephen,
 
 On dim., déc. 16 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hello,
>
> This is the third version of a series allowing to manage the cpu
> clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
> by cluster, so actually the clock management is done at cluster level.
>
> As for the other Armada 7K/8K clocks it is possible to have multiple
> AP so here again we need to have unique name: the purpose of the second
> patch is to share a common code which will be used in 3 drivers.
>
> The last 2 patch enable the driver at dt and platform level and will
> be applied through the mvebu subsystem.

What is the status of this series?

The only comments I had was from Rob about the binding and I answered
them 3 weeks ago. Do you have any other comments? Do you expect a rebase
of this series on v5.0-rc1?

Thanks,

Gregory

>
> Changelog v2->v3:
>  - Add back the first patch documenting the binding
>
> Changelog v1->v2:
>  - Header cleanup
>  - Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
>  - Use clk_hw instead of clk
>  - Use regmap_read_poll_timeout
>  - Use for_each_of_cpu_node
>  - Remove unnecessary WARN_ON()
>  - Remove headers from armada_ap_cp_helper.h
>  - Few other minor cleanup
>
> Gregory CLEMENT (6):
>   dt-bindings: ap806: add the cluster clock node in the syscon file
>   clk: mvebu: add helper file for Armada AP and CP clocks
>   clk: mvebu: add CPU clock driver for Armada 7K/8K
>   clk: mvebu: ap806: Fix clock name for the cluster
>   arm64: marvell: enable the  Armada 7K/8K CPU clk driver
>   arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
>
>  .../arm/marvell/ap806-system-controller.txt   |  22 ++
>  arch/arm64/Kconfig.platforms                  |   1 +
>  .../boot/dts/marvell/armada-ap806-quad.dtsi   |   4 +
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi |   6 +
>  drivers/clk/mvebu/Kconfig                     |   8 +
>  drivers/clk/mvebu/Makefile                    |   2 +
>  drivers/clk/mvebu/ap-cpu-clk.c                | 259 ++++++++++++++++++
>  drivers/clk/mvebu/ap806-system-controller.c   |  24 +-
>  drivers/clk/mvebu/armada_ap_cp_helper.c       |  30 ++
>  drivers/clk/mvebu/armada_ap_cp_helper.h       |  11 +
>  drivers/clk/mvebu/cp110-system-controller.c   |  32 +--
>  11 files changed, 357 insertions(+), 42 deletions(-)
>  create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
>  create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
>  create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
>
> -- 
> 2.19.2
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Re: [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K

[Gregory CLEMENT]

Hi Stephen,
 
 On jeu., janv. 10 2019, Stephen Boyd <sboyd@kernel.org> wrote:

> Quoting Gregory CLEMENT (2019-01-10 08:16:22)
>> Hi Stephen,
>>  
>>  On dim., déc. 16 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:
>> 
>> > Hello,
>> >
>> > This is the third version of a series allowing to manage the cpu
>> > clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
>> > by cluster, so actually the clock management is done at cluster level.
>> >
>> > As for the other Armada 7K/8K clocks it is possible to have multiple
>> > AP so here again we need to have unique name: the purpose of the second
>> > patch is to share a common code which will be used in 3 drivers.
>> >
>> > The last 2 patch enable the driver at dt and platform level and will
>> > be applied through the mvebu subsystem.
>> 
>> What is the status of this series?
>> 
>> The only comments I had was from Rob about the binding and I answered
>> them 3 weeks ago. Do you have any other comments? Do you expect a rebase
>> of this series on v5.0-rc1?
>> 
>
> I'm waiting for Rob. I think the binding is not proper so presumably you
> will figure out what Rob wants and then change the code accordingly and
> resend?

Actually the binding describes properly the hardware we have and that
what I answered to Rob.

Gregory

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

Re: [PATCH v3 0/6] Add CPU clock support for Armada 7K/8K

[Gregory CLEMENT]

Hi Stephen,
 
 On jeu., janv. 10 2019, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hi Stephen,
>  
>  On jeu., janv. 10 2019, Stephen Boyd <sboyd@kernel.org> wrote:
>
>> Quoting Gregory CLEMENT (2019-01-10 08:16:22)
>>> Hi Stephen,
>>>  
>>>  On dim., déc. 16 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:
>>> 
>>> > Hello,
>>> >
>>> > This is the third version of a series allowing to manage the cpu
>>> > clock for Armada 7K/8K. For these SoCs, the CPUs share the same clock
>>> > by cluster, so actually the clock management is done at cluster level.
>>> >
>>> > As for the other Armada 7K/8K clocks it is possible to have multiple
>>> > AP so here again we need to have unique name: the purpose of the second
>>> > patch is to share a common code which will be used in 3 drivers.
>>> >
>>> > The last 2 patch enable the driver at dt and platform level and will
>>> > be applied through the mvebu subsystem.
>>> 
>>> What is the status of this series?
>>> 
>>> The only comments I had was from Rob about the binding and I answered
>>> them 3 weeks ago. Do you have any other comments? Do you expect a rebase
>>> of this series on v5.0-rc1?
>>> 
>>
>> I'm waiting for Rob. I think the binding is not proper so presumably you
>> will figure out what Rob wants and then change the code accordingly and
>> resend?
>
> Actually the binding describes properly the hardware we have and that
> what I answered to Rob.

I pinged you about this series more than one month ago, and answered Rob
concerned 2 months ago! He didn't said anything about my comments so I
really think that the binding is OK and described the hardware we have.

So could you consider to apply this series?

Thanks,

Gregory


>
> Gregory
>
> -- 
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com