From: Naresh Kamboju <naresh.kamboju@linaro.org>
To: linux- stable <stable@vger.kernel.org>,
linux-clk@vger.kernel.org,
open list <linux-kernel@vger.kernel.org>,
freedreno <freedreno@lists.freedesktop.org>,
linux-arm-msm <linux-arm-msm@vger.kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sasha Levin <sashal@kernel.org>,
lkft-triage@lists.linaro.org, Arnd Bergmann <arnd@arndb.de>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Rob Clark <robdclark@chromium.org>,
Robin Murphy <robin.murphy@arm.com>,
jcrouse@codeaurora.org, Eric Anholt <eric@anholt.net>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
samuel@sholland.org
Subject: stable-rc 4.14: arm64: Internal error: Oops: clk_reparent __clk_set_parent_before on db410c
Date: Tue, 21 Jul 2020 14:02:22 +0530 [thread overview]
Message-ID: <CA+G9fYvGXOcsF=70FVwOxqVYOeGTUuzhUzh5od1cKV1hshsW_g@mail.gmail.com> (raw)
Kernel Internal oops while booting stable-rc 4.14 kernel on qcom db410c device
this problem happened only once on this specific platform.
and rcu_preempt detected stalls on CPUs/tasks detected after this and
board hung.
metadata:
git branch: linux-4.14.y
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git commit: 5b1e982af0f810358664827a6333affb4f5d8eb5
git describe: v4.14.188-126-g5b1e982af0f8
make_kernelversion: 4.14.189-rc1
kernel-config:
https://builds.tuxbuild.com/12PM71zBW-5EAp5ztC_yxg/kernel.config
Crash dump:
[ 5.424958] Unable to handle kernel paging request at virtual
address 00001008
[ 5.435485] Mem abort info:
[ 5.442509] Exception class = DABT (current EL), IL = 32 bits
[ 5.445203] SET = 0, FnV = 0
[[ 5.451101] EA = 0, S1PTW =[ 5.454226] Data abort info:
[ 5.457264] ISV = 0, ISS = 0x00000044
[ 5.460390] CM = 0, WnR = 1
[ 5.463951] user pgtable: 4k pages, 48-bit VAs, pgd = ffff80003d66d000
[ 5.467078] [0000000000001008] *pgd=0000000000000000
[ 5.473503] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 5.479838] Modules linked in: adv7511 msm mdt_loader msm_rng
drm_kms_helper rng_core drm fuse
[ 5.485405] Process kworker/2:0 (pid: 21, stack limit = 0xffff000009450000)
[ 5.494090] CPU: 2 PID: 21 Comm: kworker/2:0 Not tainted 4.14.189-rc1 #1
[ 5.501036] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 5.507996] Workqueue: events deferred_probe_work_func
[ 5.514935] task: ffff80003d454380 task.stack: ffff000009450000
[ 5.520155] pc : clk_reparent+0x60/0xe8
[ 5.526058] lr : __clk_set_parent_before+0x40/0x88
[ 5.529882] sp : ffff000009453640 pstate : 800001c5
[ 5.534748] x29: ffff000009453640 x28: ffff0000090b7000
[ 5.539615] x27: ffff80003fe7c478 x26: ffff0000094537a8
[ 5.545175] x25: 0000000000000001 x24: ffff000009239038
[ 5.550736] x23: ffff80003b6be688 x22: 0000000000000000
[ 5.556297] x21: 0000000000000000 x20: ffff80003c9d8c00
[ 5.561858] x19: ffff80003d798900 x18: 00000000fffffffe
[ 5.567419] x17: 0000ffff7fdbb6a0 x16: ffff00000821ad98
[ 5.572980] x15: 0000000000000001 x14: ffffffffffffffff
[ 5.578540] x13: ffff0000094537c8 x12: 0000000000000010
[ 5.584102] x11: 0000000000000010 x10: 0101010101010101
[ 5.589663] x9 : 0000000000000000 x8 : 7f7f7f7f7f7f7f7f
[ 5.595223] x7 : fefefefefeff6e77 x6 : 0000000000000140
[ 5.600784] x5 : 0000000000000001 x4 : ffff80003c9d8c00
[ 5.606344] x3 : ffff80003d798900 x2 : 0000000000000004
[ 5.611905] x1 : ffff80003d7989a8 x0 : 0000000000001000
[ 5.617467] Call trace:
[ 5.623030] clk_reparent+0x60/0xe8
[ 5.625465] __clk_set_parent_before+0x40/0x88
[ 5.628943] clk_register+0x330/0x618
[ 5.633668] pll_28nm_register+0xa4/0x340 [msm]
[ 5.637492] msm_dsi_pll_28nm_init+0xc8/0x1d8 [msm]
[ 5.642007] msm_dsi_pll_init+0x34/0xe0 [msm]
[ 5.646870] dsi_phy_driver_probe+0x1cc/0x310 [msm]
[ 5.651196] platform_drv_probe+0x58/0xb8
[ 5.656060] driver_probe_device+0x228/0x2d0
[ 5.660231] __device_attach_driver+0xb8/0xe8
[ 5.664750] bus_for_each_drv+0x64/0xa0
[ 5.669269] __device_attach+0xcc/0x138
[ 5.673093] device_initial_probe+0x10/0x18
[ 5.676918] bus_probe_device+0x90/0x98
[ 5.681088] device_add+0x3c4/0x5a8
[ 5.684915] of_device_add+0x40/0x58
[ 5.688392] of_platform_device_create_pdata+0x80/0xe8
[ 5.692219] of_platform_bus_create+0xd4/0x308
[ 5.697432] of_platform_populate+0x48/0xb8
[ 5.702143] msm_pdev_probe+0x3c/0x328 [msm]
[ 5.706125] platform_drv_probe+0x58/0xb8
[ 5.710642] driver_probe_device+0x228/0x2d0
[ 5.714814] __device_attach_driver+0xb8/0xe8
[ 5.719334] bus_for_each_drv+0x64/0xa0
[ 5.723852] __device_attach+0xcc/0x138
[ 5.727677] device_initial_probe+0x10/0x18
[ 5.731502] bus_probe_device+0x90/0x98
[ 5.735675] deferred_probe_work_func+0xa4/0x140
[ 5.739502] process_one_work+0x19c/0x300
[ 5.744366] worker_thread+0x4c/0x420
[ 5.748539] kthread+0x100/0x130
[ 5.752362] ret_from_fork+0x10/0x1c
[ 5.755842] Code: 54000260 f9405080 f9005460 b4000040 (f9000401)
[ 5.759669] ---[ end trace 6d70d7dd8a236384 ]---
[ 5.765922] note: kworker/2:0[21] exited with preempt_count 1
[ 26.777168] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 26.777204] 0-...: (1 GPs behind) idle=2fa/140000000000001/0
softirq=1679/1723 fqs=2625
[ 26.783112] 1-...: (1 GPs behind) idle=53a/140000000000000/0
softirq=1946/1958 fqs=2625
[ 26.791444] (detected by 3, t=5252 jiffies, g=58, c=57, q=2362)
[ 26.799781] Task dump for CPU 0:
[ 26.806033] systemd-udevd R running task 0 2533 1 0x00000202
[ 26.809515] Call trace:
[ 26.816814] __switch_to+0xe8/0x148
[ 26.819248] __wake_up_common+0x80/0x170
[ 26.822724] __wake_up_common_lock+0x7c/0xa8
[ 26.826897] __wake_up_sync_key+0x1c/0x28
[ 26.831416] sock_def_readable+0x40/0x88
[ 26.835584] Task dump for CPU 1:
[ 26.839755] systemd R running task 0 1 0 0x0000000a
[ 26.843237] Call trace:
[ 26.850531] __switch_to+0xe8/0x148
[ 26.852968] 0xffff800009fc8000
[ 26.856467] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 26.859584] 0-...: (1 GPs behind) idle=2fa/140000000000001/0
softirq=1722/1723 fqs=2625
[ 26.865145] 1-...: (1 GPs behind) idle=53a/140000000000000/0
softirq=1957/1958 fqs=2625
[ 26.873477] (detected by 3, t=5270 jiffies, g=-150, c=-151, q=3)
[ 26.881815] Task dump for CPU 0:
[ 26.888067] systemd-udevd R running task 0 2533 1 0x00000202
[ 26.891549] Call trace:
[ 26.898845] __switch_to+0xe8/0x148
[ 26.901281] __wake_up_common+0x80/0x170
[ 26.904758] __wake_up_common_lock+0x7c/0xa8
[ 26.908931] __wake_up_sync_key+0x1c/0x28
[ 26.913449] sock_def_readable+0x40/0x88
[ 26.917618] Task dump for CPU 1:
[ 26.921790] systemd R running task 0 1 0 0x0000000a
[ 26.925271] Call trace:
[ 26.932565] __switch_to+0xe8/0x148
[ 26.935002] 0xffff800009fc8000
[ 41.449201] random: crng init done
[ 41.449221] random: 7 urandom warning(s) missed due to ratelimiting
[ 89.797164] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 89.797195] 0-...: (1 GPs behind) idle=2fa/140000000000001/0
softirq=1679/1723 fqs=10482
[ 89.803103] 1-...: (1 GPs behind) idle=53a/140000000000000/0
softirq=1946/1958 fqs=10482
[ 89.811437] (detected by 3, t=21007 jiffies, g=58, c=57, q=2578)
[ 89.819773] Task dump for CPU 0:
[ 89.826027] systemd-udevd R running task 0 2533 1 0x00000202
[ 89.829508] Call trace:
[ 89.836807] __switch_to+0xe8/0x148
[ 89.839241] __wake_up_common+0x80/0x170
[ 89.842717] __wake_up_common_lock+0x7c/0xa8
[ 89.846891] __wake_up_sync_key+0x1c/0x28
[ 89.851410] sock_def_readable+0x40/0x88
<System Hung>
Full test log,
https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.188-126-g5b1e982af0f8/testrun/2969667/suite/linux-log-parser/test/check-kernel-oops-1592908/log
--
Linaro LKFT
https://lkft.linaro.org
next reply other threads:[~2020-07-21 8:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 8:32 Naresh Kamboju [this message]
2020-07-21 9:51 ` stable-rc 4.14: arm64: Internal error: Oops: clk_reparent __clk_set_parent_before on db410c Arnd Bergmann
2020-07-23 8:06 ` Stephen Boyd
2020-07-23 10:10 ` Naresh Kamboju
2020-07-23 10:26 ` Stephen Boyd
2020-08-12 17:44 ` Stephen Boyd
2020-08-13 14:00 ` Naresh Kamboju
2020-08-24 8:18 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+G9fYvGXOcsF=70FVwOxqVYOeGTUuzhUzh5od1cKV1hshsW_g@mail.gmail.com' \
--to=naresh.kamboju@linaro.org \
--cc=agross@kernel.org \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=eric@anholt.net \
--cc=freedreno@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkft-triage@lists.linaro.org \
--cc=miquel.raynal@bootlin.com \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=robdclark@chromium.org \
--cc=robin.murphy@arm.com \
--cc=samuel@sholland.org \
--cc=sashal@kernel.org \
--cc=sboyd@kernel.org \
--cc=stable@vger.kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).