* Re: linux-next: Tree for Nov 14
[not found] <20191114193132.5de921a7@canb.auug.org.au>
@ 2019-11-14 18:38 ` Naresh Kamboju
2019-11-14 20:11 ` Jan Stancek
0 siblings, 1 reply; 3+ messages in thread
From: Naresh Kamboju @ 2019-11-14 18:38 UTC (permalink / raw)
To: Linux Next Mailing List, Linux Kernel Mailing List
Cc: linux-clk, Stephen Rothwell, Daniel Lezcano, Mark Brown,
lkft-triage, LTP List, Jan Stancek, chrubis, Arnd Bergmann,
John Stultz, Dmitry Vyukov
On Thu, 14 Nov 2019 at 14:01, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> Hi all,
> Changes since 20191113:
> The y2038 tree gained a build failure for which I applied a patch.
<trim>
> The akpm-current tree gained a conflict against the y2038 tree.
>
> Non-merge commits (relative to Linus' tree): 10388
> 9238 files changed, 397357 insertions(+), 174171 deletions(-)
Results from Linaro’s test farm.
Regressions detected on x86_64, and i386.
LTP syscalls settimeofday01/02 failed on x86_64 and i386 running
5.4.0-rc7-next-20191114.
Following ltp-syscalls-tests failed.
* settimeofday01
* settimeofday02
* stime01
* stime02
tst_test.c:1118: INFO: Timeout per run is 0h 15m 00s
setsockopt04.c:39: INFO: Try to set send buffer size to: 4294967040
[ 1278.348740] BUG: unable to handle page fault for address: 000000000061f658
[ 1278.356134] #PF: supervisor read access in kernel mode
[ 1278.361278] #PF: error_code(0x0001) - permissions violation
[ 1278.366858] PGD 80000004225a3067 P4D 80000004225a3067 PUD 417941067
PMD 456981067 PTE 800000037df85067
[ 1278.376165] Oops: 0001 [#1] SMP PTI
[ 1278.379655] CPU: 2 PID: 9737 Comm: settimeofday01 Not tainted
5.4.0-rc7-next-20191114 #1
[ 1278.387733] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 1278.395206] RIP: 0010:__x64_sys_settimeofday+0x77/0x120
[ 1278.400429] Code: 55 d8 0f 85 88 00 00 00 be cf 00 00 00 48 c7 c7
88 8a bc 90 e8 0a 12 13 00 48 8d 43 08 e8 c1 7e cc 00 85 c0 48 89 55
e0 75 66 <48> 81 7b 08 40 42 0f 00 0f 8f 81 00 00 00 48 69 d2 e8 03 00
00 4d
[ 1278.419167] RSP: 0018:ffffa59582333ef8 EFLAGS: 00010246
[ 1278.424392] RAX: 0000000000000000 RBX: 000000000061f650 RCX: 0000000000000000
[ 1278.431515] RDX: 0000000000096b6a RSI: ffff8c3e555e1918 RDI: ffff8c3e5b226648
[ 1278.438637] RBP: ffffa59582333f28 R08: 0000000000000000 R09: 0000000000000000
[ 1278.445763] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 1278.452884] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1278.460010] FS: 00007f9675fb8580(0000) GS:ffff8c3e9fb00000(0000)
knlGS:0000000000000000
[ 1278.468085] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1278.473825] CR2: 000000000061f658 CR3: 000000045a56a002 CR4: 00000000003606e0
[ 1278.480985] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1278.488113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1278.495238] Call Trace:
[ 1278.497684] do_syscall_64+0x55/0x1d0
[ 1278.501349] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1278.506402] RIP: 0033:0x7f9675a97fd7
[ 1278.509984] Code: b9 0c 00 ba 2c 00 00 00 48 8d 35 bc 9b 0c 00 48
8d 3d ed 79 0c 00 e8 38 c4 f7 ff 0f 1f 84 00 00 00 00 00 b8 a4 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 be 2f 00 f7 d8 64 89
01 48
[ 1278.528723] RSP: 002b:00007ffcb08e0b68 EFLAGS: 00000202 ORIG_RAX:
00000000000000a4
[ 1278.536280] RAX: ffffffffffffffda RBX: 00007f9675fb8500 RCX: 00007f9675a97fd7
[ 1278.543406] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 000000000061f650
[ 1278.550529] RBP: 0000000000000000 R08: 00007ffcb093d080 R09: 00007ffcb08e0b40
[ 1278.557654] R10: 00000000000005de R11: 0000000000000202 R12: 20c49ba5e353f7cf
[ 1278.564776] R13: 00007ffcb08e0c60 R14: 0000000000000000 R15: 0000000000000000
[ 1278.571946] Modules linked in: tun btrfs xor zstd_decompress
zstd_compress raid6_pq xfs libcrc32c x86_pkg_temp_thermal fuse
[ 1278.583062] CR2: 000000000061f658
[ 1278.586372] ---[ end trace 261d3ba98695973b ]---
[ 1278.590984] RIP: 0010:__x64_sys_settimeofday+0x77/0x120
[ 1278.596202] Code: 55 d8 0f 85 88 00 00 00 be cf 00 00 00 48 c7 c7
88 8a bc 90 e8 0a 12 13 00 48 8d 43 08 e8 c1 7e cc 00 85 c0 48 89 55
e0 75 66 <48> 81 7b 08 40 42 0f 00 0f 8f 81 00 00 00 48 69 d2 e8 03 00
00 4d
[ 1278.614949] RSP: 0018:ffffa59582333ef8 EFLAGS: 00010246
[ 1278.620172] RAX: 0000000000000000 RBX: 000000000061f650 RCX: 0000000000000000
[ 1278.627296] RDX: 0000000000096b6a RSI: ffff8c3e555e1918 RDI: ffff8c3e5b226648
[ 1278.634419] RBP: ffffa59582333f28 R08: 0000000000000000 R09: 0000000000000000
[ 1278.641541] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 1278.648665] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1278.655791] FS: 00007f9675fb8580(0000) GS:ffff8c3e9fb00000(0000)
knlGS:0000000000000000
[ 1278.663866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1278.669605] CR2: 000000000061f658 CR3: 000000045a56a002 CR4: 00000000003606e0
[ 1278.676729] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1278.683861] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1278.690988] BUG: sleeping function called from invalid context at
/usr/src/kernel/include/linux/percpu-rwsem.h:38
[ 1278.701237] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid:
9737, name: settimeofday01
[ 1278.709747] INFO: lockdep is turned off.
[ 1278.713665] irq event stamp: 2496
[ 1278.716976] hardirqs last enabled at (2495): [<ffffffff8f5a0e2f>]
ktime_get_coarse_real_ts64+0x5f/0xb0
[ 1278.726361] hardirqs last disabled at (2496): [<ffffffff8f401e2b>]
trace_hardirqs_off_thunk+0x1a/0x1c
[ 1278.735564] softirqs last enabled at (2004): [<ffffffff90600338>]
__do_softirq+0x338/0x43a
[ 1278.743931] softirqs last disabled at (1993): [<ffffffff8f4ffc48>]
irq_exit+0xb8/0xc0
[ 1278.751752] CPU: 2 PID: 9737 Comm: settimeofday01 Tainted: G D
5.4.0-rc7-next-20191114 #1
[ 1278.761216] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 1278.768697] Call Trace:
[ 1278.771148] dump_stack+0x7a/0xa5
[ 1278.774461] ___might_sleep+0x163/0x250
[ 1278.778299] __might_sleep+0x4a/0x80
[ 1278.781879] exit_signals+0x33/0x2d0
[ 1278.785457] do_exit+0xb6/0xcf0
[ 1278.788593] ? __x64_sys_settimeofday+0x6f/0x120
[ 1278.793206] rewind_stack_do_exit+0x17/0x20
[ 1278.797390] RIP: 0033:0x7f9675a97fd7
[ 1278.800985] Code: b9 0c 00 ba 2c 00 00 00 48 8d 35 bc 9b 0c 00 48
8d 3d ed 79 0c 00 e8 38 c4 f7 ff 0f 1f 84 00 00 00 00 00 b8 a4 00 00
00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 91 be 2f 00 f7 d8 64 89
01 48
[ 1278.819723] RSP: 002b:00007ffcb08e0b68 EFLAGS: 00000202 ORIG_RAX:
00000000000000a4
[ 1278.827279] RAX: ffffffffffffffda RBX: 00007f9675fb8500 RCX: 00007f9675a97fd7
[ 1278.834402] RDX: 0000000000000064 RSI: 0000000000000000 RDI: 000000000061f650
[ 1278.841526] RBP: 0000000000000000 R08: 00007ffcb093d080 R09: 00007ffcb08e0b40
[ 1278.848652] R10: 00000000000005de R11: 0000000000000202 R12: 20c49ba5e353f7cf
[ 1278.855774] R13: 00007ffcb08e0c60 R14: 0000000000000000 R15: 0000000000000000
setsockopt04.c:40: INFO: Send buffer size was set to: 4608
setsockopt04.c:45: PASS: Was unable to set negative send b
[ 1278.874497] BUG: unable to handle page fault for address: 000000000061f668
[ 1278.882362] #PF: supervisor read access in kernel mode
[ 1278.887493] #PF: error_code(0x0001) - permissions violation
[ 1278.893057] PGD 8000000412ef1067 P4D 8000000412ef1067 PUD 423a10067
PMD 456981067 PTE 800000037dfe6067
[ 1278.902348] Oops: 0001 [#2] SMP PTI
[ 1278.905833] CPU: 0 PID: 9738 Comm: settimeofday02 Tainted: G D
W 5.4.0-rc7-next-20191114 #1
[ 1278.915303] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 1278.922776] RIP: 0010:__x64_sys_settimeofday+0x77/0x120
Complete log:
-------------------
https://lkft.validation.linaro.org/scheduler/job/1010601#L13874
summary:
--------------
git branch: master
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
git commit: 8466d23e6e677cb58e237d1f35588497b8dd5c5c
git describe: next-20191114
make_kernelversion: 5.4.0-rc7
kernel-config:
http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/intel-corei7-64/lkft/linux-next/646/config
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: linux-next: Tree for Nov 14
2019-11-14 18:38 ` linux-next: Tree for Nov 14 Naresh Kamboju
@ 2019-11-14 20:11 ` Jan Stancek
2019-11-14 21:19 ` Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Jan Stancek @ 2019-11-14 20:11 UTC (permalink / raw)
To: Naresh Kamboju, Arnd Bergmann
Cc: Linux Next Mailing List, Linux Kernel Mailing List, linux-clk,
Stephen Rothwell, Daniel Lezcano, Mark Brown, lkft-triage,
LTP List, chrubis, John Stultz, Dmitry Vyukov
----- Original Message -----
> On Thu, 14 Nov 2019 at 14:01, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > Hi all,
> > Changes since 20191113:
> > The y2038 tree gained a build failure for which I applied a patch.
> <trim>
> > The akpm-current tree gained a conflict against the y2038 tree.
> >
> > Non-merge commits (relative to Linus' tree): 10388
> > 9238 files changed, 397357 insertions(+), 174171 deletions(-)
>
> Results from Linaro’s test farm.
> Regressions detected on x86_64, and i386.
>
> LTP syscalls settimeofday01/02 failed on x86_64 and i386 running
> 5.4.0-rc7-next-20191114.
>
> Following ltp-syscalls-tests failed.
> * settimeofday01
> * settimeofday02
> * stime01
> * stime02
Looks like typo in
adde74306a4b ("y2038: time: avoid timespec usage in settimeofday()")
- if (!timeval_valid(&user_tv))
+ if (tv->tv_usec > USEC_PER_SEC)
was likely meant as:
- if (!timeval_valid(&user_tv))
+ if (new_ts.tv_nsec > USEC_PER_SEC)
since tv is user pointer.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: linux-next: Tree for Nov 14
2019-11-14 20:11 ` Jan Stancek
@ 2019-11-14 21:19 ` Arnd Bergmann
0 siblings, 0 replies; 3+ messages in thread
From: Arnd Bergmann @ 2019-11-14 21:19 UTC (permalink / raw)
To: Jan Stancek
Cc: Naresh Kamboju, Linux Next Mailing List,
Linux Kernel Mailing List, linux-clk, Stephen Rothwell,
Daniel Lezcano, Mark Brown, lkft-triage, LTP List, chrubis,
John Stultz, Dmitry Vyukov
On Thu, Nov 14, 2019 at 9:11 PM Jan Stancek <jstancek@redhat.com> wrote:
>
>
>
> ----- Original Message -----
> > On Thu, 14 Nov 2019 at 14:01, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > >
> > > Hi all,
> > > Changes since 20191113:
> > > The y2038 tree gained a build failure for which I applied a patch.
> > <trim>
> > > The akpm-current tree gained a conflict against the y2038 tree.
> > >
> > > Non-merge commits (relative to Linus' tree): 10388
> > > 9238 files changed, 397357 insertions(+), 174171 deletions(-)
> >
> > Results from Linaro’s test farm.
> > Regressions detected on x86_64, and i386.
> >
> > LTP syscalls settimeofday01/02 failed on x86_64 and i386 running
> > 5.4.0-rc7-next-20191114.
> >
> > Following ltp-syscalls-tests failed.
> > * settimeofday01
> > * settimeofday02
> > * stime01
> > * stime02
>
> Looks like typo in
> adde74306a4b ("y2038: time: avoid timespec usage in settimeofday()")
>
> - if (!timeval_valid(&user_tv))
> + if (tv->tv_usec > USEC_PER_SEC)
>
> was likely meant as:
>
> - if (!timeval_valid(&user_tv))
> + if (new_ts.tv_nsec > USEC_PER_SEC)
>
> since tv is user pointer.
>
I have uploaded a fixed version, sorry for the breakage. The new version also
addresses the build failure that Stephen reported.
Arnd
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-11-14 21:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20191114193132.5de921a7@canb.auug.org.au>
2019-11-14 18:38 ` linux-next: Tree for Nov 14 Naresh Kamboju
2019-11-14 20:11 ` Jan Stancek
2019-11-14 21:19 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).