* [PATCH 0/5] crypto: add NEON-optimized BLAKE2b
@ 2020-12-15 23:47 Eric Biggers
2020-12-15 23:47 ` [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s Eric Biggers
` (5 more replies)
0 siblings, 6 replies; 17+ messages in thread
From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw)
To: linux-crypto
Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba,
Jason A . Donenfeld, Paul Crowley
This patchset adds a NEON implementation of BLAKE2b for 32-bit ARM.
Patches 1-4 prepare for it by making some updates to the generic
implementation, while patch 5 adds the actual NEON implementation.
On Cortex-A7 (which these days is the most common ARM processor that
doesn't have the ARMv8 Crypto Extensions), this is over twice as fast as
SHA-256, and slightly faster than SHA-1. It is also almost three times
as fast as the generic implementation of BLAKE2b:
Algorithm Cycles per byte (on 4096-byte messages)
=================== =======================================
blake2b-256-neon 14.1
sha1-neon 16.4
sha1-asm 20.8
blake2s-256-generic 26.1
sha256-neon 28.9
sha256-asm 32.1
blake2b-256-generic 39.9
This implementation isn't directly based on any other implementation,
but it borrows some ideas from previous NEON code I've written as well
as from chacha-neon-core.S. At least on Cortex-A7, it is faster than
the other NEON implementations of BLAKE2b I'm aware of (the
implementation in the BLAKE2 official repository using intrinsics, and
Andrew Moon's implementation which can be found in SUPERCOP).
NEON-optimized BLAKE2b is useful because there is interest in using
BLAKE2b-256 for dm-verity on low-end Android devices (specifically,
devices that lack the ARMv8 Crypto Extensions) to replace SHA-1. On
these devices, the performance cost of upgrading to SHA-256 may be
unacceptable, whereas BLAKE2b-256 would actually improve performance.
Although BLAKE2b is intended for 64-bit platforms (unlike BLAKE2s which
is intended for 32-bit platforms), on 32-bit ARM processors with NEON,
BLAKE2b is actually faster than BLAKE2s. This is because NEON supports
64-bit operations, and because BLAKE2s's block size is too small for
NEON to be helpful for it. The best I've been able to do with BLAKE2s
on Cortex-A7 is 19.0 cpb with an optimized scalar implementation.
(I didn't try BLAKE2sp and BLAKE3, which in theory would be faster, but
they're more complex as they require running multiple hashes at once.
Note that BLAKE2b already uses all the NEON bandwidth on the Cortex-A7,
so I expect that any speedup from BLAKE2sp or BLAKE3 would come only
from the smaller number of rounds, not from the extra parallelism.)
This patchset was tested on a Raspberry Pi 2, including with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Eric Biggers (5):
crypto: blake2b - rename constants for consistency with blake2s
crypto: blake2b - define shash_alg structs using macros
crypto: blake2b - export helpers for optimized implementations
crypto: blake2b - update file comment
crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation
arch/arm/crypto/Kconfig | 10 +
arch/arm/crypto/Makefile | 2 +
arch/arm/crypto/blake2b-neon-core.S | 357 ++++++++++++++++++++++++++++
arch/arm/crypto/blake2b-neon-glue.c | 105 ++++++++
crypto/blake2b_generic.c | 205 +++++++---------
include/crypto/blake2b.h | 54 +++++
6 files changed, 619 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/crypto/blake2b-neon-core.S
create mode 100644 arch/arm/crypto/blake2b-neon-glue.c
create mode 100644 include/crypto/blake2b.h
base-commit: 3db1a3fa98808aa90f95ec3e0fa2fc7abf28f5c9
--
2.29.2
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers @ 2020-12-15 23:47 ` Eric Biggers 2020-12-17 17:13 ` David Sterba 2020-12-15 23:47 ` [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros Eric Biggers ` (4 subsequent siblings) 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley From: Eric Biggers <ebiggers@google.com> Rename some BLAKE2b-related constants to be consistent with the names used in the BLAKE2s implementation (see include/crypto/blake2s.h): BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE BLAKE2B_BLOCKBYTES => BLAKE2B_BLOCK_SIZE BLAKE2B_KEYBYTES => BLAKE2B_KEY_SIZE Signed-off-by: Eric Biggers <ebiggers@google.com> --- crypto/blake2b_generic.c | 58 +++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/crypto/blake2b_generic.c b/crypto/blake2b_generic.c index a2ffe60e06d34..83942f511075e 100644 --- a/crypto/blake2b_generic.c +++ b/crypto/blake2b_generic.c @@ -25,21 +25,22 @@ #include <linux/bitops.h> #include <crypto/internal/hash.h> -#define BLAKE2B_160_DIGEST_SIZE (160 / 8) -#define BLAKE2B_256_DIGEST_SIZE (256 / 8) -#define BLAKE2B_384_DIGEST_SIZE (384 / 8) -#define BLAKE2B_512_DIGEST_SIZE (512 / 8) - -enum blake2b_constant { - BLAKE2B_BLOCKBYTES = 128, - BLAKE2B_KEYBYTES = 64, + +enum blake2b_lengths { + BLAKE2B_BLOCK_SIZE = 128, + BLAKE2B_KEY_SIZE = 64, + + BLAKE2B_160_HASH_SIZE = 20, + BLAKE2B_256_HASH_SIZE = 32, + BLAKE2B_384_HASH_SIZE = 48, + BLAKE2B_512_HASH_SIZE = 64, }; struct blake2b_state { u64 h[8]; u64 t[2]; u64 f[2]; - u8 buf[BLAKE2B_BLOCKBYTES]; + u8 buf[BLAKE2B_BLOCK_SIZE]; size_t buflen; }; @@ -96,7 +97,7 @@ static void blake2b_increment_counter(struct blake2b_state *S, const u64 inc) } while (0) static void blake2b_compress(struct blake2b_state *S, - const u8 block[BLAKE2B_BLOCKBYTES]) + const u8 block[BLAKE2B_BLOCK_SIZE]) { u64 m[16]; u64 v[16]; @@ -140,7 +141,7 @@ static void blake2b_compress(struct blake2b_state *S, #undef ROUND struct blake2b_tfm_ctx { - u8 key[BLAKE2B_KEYBYTES]; + u8 key[BLAKE2B_KEY_SIZE]; unsigned int keylen; }; @@ -149,7 +150,7 @@ static int blake2b_setkey(struct crypto_shash *tfm, const u8 *key, { struct blake2b_tfm_ctx *tctx = crypto_shash_ctx(tfm); - if (keylen == 0 || keylen > BLAKE2B_KEYBYTES) + if (keylen == 0 || keylen > BLAKE2B_KEY_SIZE) return -EINVAL; memcpy(tctx->key, key, keylen); @@ -176,7 +177,7 @@ static int blake2b_init(struct shash_desc *desc) * _final will process it */ memcpy(state->buf, tctx->key, tctx->keylen); - state->buflen = BLAKE2B_BLOCKBYTES; + state->buflen = BLAKE2B_BLOCK_SIZE; } return 0; } @@ -186,7 +187,7 @@ static int blake2b_update(struct shash_desc *desc, const u8 *in, { struct blake2b_state *state = shash_desc_ctx(desc); const size_t left = state->buflen; - const size_t fill = BLAKE2B_BLOCKBYTES - left; + const size_t fill = BLAKE2B_BLOCK_SIZE - left; if (!inlen) return 0; @@ -195,16 +196,16 @@ static int blake2b_update(struct shash_desc *desc, const u8 *in, state->buflen = 0; /* Fill buffer */ memcpy(state->buf + left, in, fill); - blake2b_increment_counter(state, BLAKE2B_BLOCKBYTES); + blake2b_increment_counter(state, BLAKE2B_BLOCK_SIZE); /* Compress */ blake2b_compress(state, state->buf); in += fill; inlen -= fill; - while (inlen > BLAKE2B_BLOCKBYTES) { - blake2b_increment_counter(state, BLAKE2B_BLOCKBYTES); + while (inlen > BLAKE2B_BLOCK_SIZE) { + blake2b_increment_counter(state, BLAKE2B_BLOCK_SIZE); blake2b_compress(state, in); - in += BLAKE2B_BLOCKBYTES; - inlen -= BLAKE2B_BLOCKBYTES; + in += BLAKE2B_BLOCK_SIZE; + inlen -= BLAKE2B_BLOCK_SIZE; } } memcpy(state->buf + state->buflen, in, inlen); @@ -223,7 +224,8 @@ static int blake2b_final(struct shash_desc *desc, u8 *out) /* Set last block */ state->f[0] = (u64)-1; /* Padding */ - memset(state->buf + state->buflen, 0, BLAKE2B_BLOCKBYTES - state->buflen); + memset(state->buf + state->buflen, 0, + BLAKE2B_BLOCK_SIZE - state->buflen); blake2b_compress(state, state->buf); /* Avoid temporary buffer and switch the internal output to LE order */ @@ -240,10 +242,10 @@ static struct shash_alg blake2b_algs[] = { .base.cra_driver_name = "blake2b-160-generic", .base.cra_priority = 100, .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCKBYTES, + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_160_DIGEST_SIZE, + .digestsize = BLAKE2B_160_HASH_SIZE, .setkey = blake2b_setkey, .init = blake2b_init, .update = blake2b_update, @@ -254,10 +256,10 @@ static struct shash_alg blake2b_algs[] = { .base.cra_driver_name = "blake2b-256-generic", .base.cra_priority = 100, .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCKBYTES, + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_256_DIGEST_SIZE, + .digestsize = BLAKE2B_256_HASH_SIZE, .setkey = blake2b_setkey, .init = blake2b_init, .update = blake2b_update, @@ -268,10 +270,10 @@ static struct shash_alg blake2b_algs[] = { .base.cra_driver_name = "blake2b-384-generic", .base.cra_priority = 100, .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCKBYTES, + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_384_DIGEST_SIZE, + .digestsize = BLAKE2B_384_HASH_SIZE, .setkey = blake2b_setkey, .init = blake2b_init, .update = blake2b_update, @@ -282,10 +284,10 @@ static struct shash_alg blake2b_algs[] = { .base.cra_driver_name = "blake2b-512-generic", .base.cra_priority = 100, .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCKBYTES, + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_512_DIGEST_SIZE, + .digestsize = BLAKE2B_512_HASH_SIZE, .setkey = blake2b_setkey, .init = blake2b_init, .update = blake2b_update, -- 2.29.2 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s 2020-12-15 23:47 ` [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s Eric Biggers @ 2020-12-17 17:13 ` David Sterba 0 siblings, 0 replies; 17+ messages in thread From: David Sterba @ 2020-12-17 17:13 UTC (permalink / raw) To: Eric Biggers Cc: linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:04PM -0800, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > Rename some BLAKE2b-related constants to be consistent with the names > used in the BLAKE2s implementation (see include/crypto/blake2s.h): > > BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE > BLAKE2B_BLOCKBYTES => BLAKE2B_BLOCK_SIZE > BLAKE2B_KEYBYTES => BLAKE2B_KEY_SIZE > > Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Sterba <dsterba@suse.com> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 2020-12-15 23:47 ` [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s Eric Biggers @ 2020-12-15 23:47 ` Eric Biggers 2020-12-17 17:15 ` David Sterba 2020-12-15 23:47 ` [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations Eric Biggers ` (3 subsequent siblings) 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley From: Eric Biggers <ebiggers@google.com> The shash_alg structs for the four variants of BLAKE2b are identical except for the algorithm name, driver name, and digest size. So, avoid code duplication by using a macro to define these structs. Signed-off-by: Eric Biggers <ebiggers@google.com> --- crypto/blake2b_generic.c | 82 ++++++++++++---------------------------- 1 file changed, 25 insertions(+), 57 deletions(-) diff --git a/crypto/blake2b_generic.c b/crypto/blake2b_generic.c index 83942f511075e..0e38e3e48297c 100644 --- a/crypto/blake2b_generic.c +++ b/crypto/blake2b_generic.c @@ -236,64 +236,32 @@ static int blake2b_final(struct shash_desc *desc, u8 *out) return 0; } -static struct shash_alg blake2b_algs[] = { - { - .base.cra_name = "blake2b-160", - .base.cra_driver_name = "blake2b-160-generic", - .base.cra_priority = 100, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), - .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_160_HASH_SIZE, - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize = sizeof(struct blake2b_state), - }, { - .base.cra_name = "blake2b-256", - .base.cra_driver_name = "blake2b-256-generic", - .base.cra_priority = 100, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), - .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_256_HASH_SIZE, - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize = sizeof(struct blake2b_state), - }, { - .base.cra_name = "blake2b-384", - .base.cra_driver_name = "blake2b-384-generic", - .base.cra_priority = 100, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), - .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_384_HASH_SIZE, - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize = sizeof(struct blake2b_state), - }, { - .base.cra_name = "blake2b-512", - .base.cra_driver_name = "blake2b-512-generic", - .base.cra_priority = 100, - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, - .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, - .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), - .base.cra_module = THIS_MODULE, - .digestsize = BLAKE2B_512_HASH_SIZE, - .setkey = blake2b_setkey, - .init = blake2b_init, - .update = blake2b_update, - .final = blake2b_final, - .descsize = sizeof(struct blake2b_state), +#define BLAKE2B_ALG(name, driver_name, digest_size) \ + { \ + .base.cra_name = name, \ + .base.cra_driver_name = driver_name, \ + .base.cra_priority = 100, \ + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \ + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, \ + .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ + .base.cra_module = THIS_MODULE, \ + .digestsize = digest_size, \ + .setkey = blake2b_setkey, \ + .init = blake2b_init, \ + .update = blake2b_update, \ + .final = blake2b_final, \ + .descsize = sizeof(struct blake2b_state), \ } + +static struct shash_alg blake2b_algs[] = { + BLAKE2B_ALG("blake2b-160", "blake2b-160-generic", + BLAKE2B_160_HASH_SIZE), + BLAKE2B_ALG("blake2b-256", "blake2b-256-generic", + BLAKE2B_256_HASH_SIZE), + BLAKE2B_ALG("blake2b-384", "blake2b-384-generic", + BLAKE2B_384_HASH_SIZE), + BLAKE2B_ALG("blake2b-512", "blake2b-512-generic", + BLAKE2B_512_HASH_SIZE), }; static int __init blake2b_mod_init(void) -- 2.29.2 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros 2020-12-15 23:47 ` [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros Eric Biggers @ 2020-12-17 17:15 ` David Sterba 2020-12-17 18:35 ` Eric Biggers 0 siblings, 1 reply; 17+ messages in thread From: David Sterba @ 2020-12-17 17:15 UTC (permalink / raw) To: Eric Biggers Cc: linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:05PM -0800, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > The shash_alg structs for the four variants of BLAKE2b are identical > except for the algorithm name, driver name, and digest size. So, avoid > code duplication by using a macro to define these structs. > > Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Sterba <dsterba@suse.com> > +static struct shash_alg blake2b_algs[] = { > + BLAKE2B_ALG("blake2b-160", "blake2b-160-generic", > + BLAKE2B_160_HASH_SIZE), Spelling out the algo names as string is better as it is greppable and matches the module name, compared to using the #stringify macro operator. > + BLAKE2B_ALG("blake2b-256", "blake2b-256-generic", > + BLAKE2B_256_HASH_SIZE), > + BLAKE2B_ALG("blake2b-384", "blake2b-384-generic", > + BLAKE2B_384_HASH_SIZE), > + BLAKE2B_ALG("blake2b-512", "blake2b-512-generic", > + BLAKE2B_512_HASH_SIZE), > }; > > static int __init blake2b_mod_init(void) > -- > 2.29.2 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros 2020-12-17 17:15 ` David Sterba @ 2020-12-17 18:35 ` Eric Biggers 0 siblings, 0 replies; 17+ messages in thread From: Eric Biggers @ 2020-12-17 18:35 UTC (permalink / raw) To: dsterba, linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Thu, Dec 17, 2020 at 06:15:17PM +0100, David Sterba wrote: > On Tue, Dec 15, 2020 at 03:47:05PM -0800, Eric Biggers wrote: > > From: Eric Biggers <ebiggers@google.com> > > > > The shash_alg structs for the four variants of BLAKE2b are identical > > except for the algorithm name, driver name, and digest size. So, avoid > > code duplication by using a macro to define these structs. > > > > Signed-off-by: Eric Biggers <ebiggers@google.com> > > Reviewed-by: David Sterba <dsterba@suse.com> > > > +static struct shash_alg blake2b_algs[] = { > > + BLAKE2B_ALG("blake2b-160", "blake2b-160-generic", > > + BLAKE2B_160_HASH_SIZE), > > Spelling out the algo names as string is better as it is greppable and > matches the module name, compared to using the #stringify macro > operator. > Yes, I considered trying to make it so that BLAKE2B_ALG(n) would generate the names and constant for blake2b-$n, but it seemed better to keep it greppable. - Eric ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 2020-12-15 23:47 ` [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s Eric Biggers 2020-12-15 23:47 ` [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros Eric Biggers @ 2020-12-15 23:47 ` Eric Biggers 2020-12-17 17:15 ` David Sterba 2020-12-15 23:47 ` [PATCH 4/5] crypto: blake2b - update file comment Eric Biggers ` (2 subsequent siblings) 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley From: Eric Biggers <ebiggers@google.com> In preparation for adding architecture-specific implementations of BLAKE2b, create a header <crypto/blake2b.h> that contains common constants, structs, and helper functions for BLAKE2b. Furthermore, export the BLAKE2b generic setkey(), init(), update(), and final() functions, and add functions __crypto_blake2b_update() and __crypto_blake2b_final() which take a pointer to a blake2b_compress_blocks_t function. This way, optimized implementations of BLAKE2b only have to provide an implementation of blake2b_compress_blocks_t. (This is modeled on how the nhpoly1305 implementations work. Also, the prototype of blake2b_compress_blocks_t is meant to be similar to that of blake2s_compress_arch().) Signed-off-by: Eric Biggers <ebiggers@google.com> --- crypto/blake2b_generic.c | 100 +++++++++++++++++++++------------------ include/crypto/blake2b.h | 54 +++++++++++++++++++++ 2 files changed, 109 insertions(+), 45 deletions(-) create mode 100644 include/crypto/blake2b.h diff --git a/crypto/blake2b_generic.c b/crypto/blake2b_generic.c index 0e38e3e48297c..fd5159b7aa9f2 100644 --- a/crypto/blake2b_generic.c +++ b/crypto/blake2b_generic.c @@ -23,27 +23,9 @@ #include <linux/string.h> #include <linux/kernel.h> #include <linux/bitops.h> +#include <crypto/blake2b.h> #include <crypto/internal/hash.h> - -enum blake2b_lengths { - BLAKE2B_BLOCK_SIZE = 128, - BLAKE2B_KEY_SIZE = 64, - - BLAKE2B_160_HASH_SIZE = 20, - BLAKE2B_256_HASH_SIZE = 32, - BLAKE2B_384_HASH_SIZE = 48, - BLAKE2B_512_HASH_SIZE = 64, -}; - -struct blake2b_state { - u64 h[8]; - u64 t[2]; - u64 f[2]; - u8 buf[BLAKE2B_BLOCK_SIZE]; - size_t buflen; -}; - static const u64 blake2b_IV[8] = { 0x6a09e667f3bcc908ULL, 0xbb67ae8584caa73bULL, 0x3c6ef372fe94f82bULL, 0xa54ff53a5f1d36f1ULL, @@ -96,8 +78,8 @@ static void blake2b_increment_counter(struct blake2b_state *S, const u64 inc) G(r,7,v[ 3],v[ 4],v[ 9],v[14]); \ } while (0) -static void blake2b_compress(struct blake2b_state *S, - const u8 block[BLAKE2B_BLOCK_SIZE]) +static void blake2b_compress_generic(struct blake2b_state *S, + const u8 block[BLAKE2B_BLOCK_SIZE]) { u64 m[16]; u64 v[16]; @@ -140,12 +122,18 @@ static void blake2b_compress(struct blake2b_state *S, #undef G #undef ROUND -struct blake2b_tfm_ctx { - u8 key[BLAKE2B_KEY_SIZE]; - unsigned int keylen; -}; +static void blake2b_compress_blocks_generic(struct blake2b_state *S, + const u8 *in, size_t nblocks, + unsigned int inc) +{ + do { + blake2b_increment_counter(S, inc); + blake2b_compress_generic(S, in); + in += BLAKE2B_BLOCK_SIZE; + } while (--nblocks); +} -static int blake2b_setkey(struct crypto_shash *tfm, const u8 *key, +int crypto_blake2b_setkey(struct crypto_shash *tfm, const u8 *key, unsigned int keylen) { struct blake2b_tfm_ctx *tctx = crypto_shash_ctx(tfm); @@ -158,8 +146,9 @@ static int blake2b_setkey(struct crypto_shash *tfm, const u8 *key, return 0; } +EXPORT_SYMBOL_GPL(crypto_blake2b_setkey); -static int blake2b_init(struct shash_desc *desc) +int crypto_blake2b_init(struct shash_desc *desc) { struct blake2b_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm); struct blake2b_state *state = shash_desc_ctx(desc); @@ -181,9 +170,19 @@ static int blake2b_init(struct shash_desc *desc) } return 0; } +EXPORT_SYMBOL_GPL(crypto_blake2b_init); + +int crypto_blake2b_update(struct shash_desc *desc, + const u8 *in, unsigned int inlen) +{ + return __crypto_blake2b_update(desc, in, inlen, + blake2b_compress_blocks_generic); +} +EXPORT_SYMBOL_GPL(crypto_blake2b_update); -static int blake2b_update(struct shash_desc *desc, const u8 *in, - unsigned int inlen) +int __crypto_blake2b_update(struct shash_desc *desc, + const u8 *in, unsigned int inlen, + blake2b_compress_blocks_t compress) { struct blake2b_state *state = shash_desc_ctx(desc); const size_t left = state->buflen; @@ -194,18 +193,19 @@ static int blake2b_update(struct shash_desc *desc, const u8 *in, if (inlen > fill) { state->buflen = 0; - /* Fill buffer */ memcpy(state->buf + left, in, fill); - blake2b_increment_counter(state, BLAKE2B_BLOCK_SIZE); - /* Compress */ - blake2b_compress(state, state->buf); + (*compress)(state, state->buf, 1, BLAKE2B_BLOCK_SIZE); in += fill; inlen -= fill; - while (inlen > BLAKE2B_BLOCK_SIZE) { - blake2b_increment_counter(state, BLAKE2B_BLOCK_SIZE); - blake2b_compress(state, in); - in += BLAKE2B_BLOCK_SIZE; - inlen -= BLAKE2B_BLOCK_SIZE; + if (inlen > BLAKE2B_BLOCK_SIZE) { + /* Hash one less (full) block than strictly possible */ + size_t nbytes = round_up(inlen - BLAKE2B_BLOCK_SIZE, + BLAKE2B_BLOCK_SIZE); + + (*compress)(state, in, nbytes / BLAKE2B_BLOCK_SIZE, + BLAKE2B_BLOCK_SIZE); + in += nbytes; + inlen -= nbytes; } } memcpy(state->buf + state->buflen, in, inlen); @@ -213,20 +213,29 @@ static int blake2b_update(struct shash_desc *desc, const u8 *in, return 0; } +EXPORT_SYMBOL_GPL(__crypto_blake2b_update); -static int blake2b_final(struct shash_desc *desc, u8 *out) +int crypto_blake2b_final(struct shash_desc *desc, u8 *out) +{ + return __crypto_blake2b_final(desc, out, + blake2b_compress_blocks_generic); +} +EXPORT_SYMBOL_GPL(crypto_blake2b_final); + +int __crypto_blake2b_final(struct shash_desc *desc, u8 *out, + blake2b_compress_blocks_t compress) { struct blake2b_state *state = shash_desc_ctx(desc); const int digestsize = crypto_shash_digestsize(desc->tfm); size_t i; - blake2b_increment_counter(state, state->buflen); /* Set last block */ state->f[0] = (u64)-1; /* Padding */ memset(state->buf + state->buflen, 0, BLAKE2B_BLOCK_SIZE - state->buflen); - blake2b_compress(state, state->buf); + + (*compress)(state, state->buf, 1, state->buflen); /* Avoid temporary buffer and switch the internal output to LE order */ for (i = 0; i < ARRAY_SIZE(state->h); i++) @@ -235,6 +244,7 @@ static int blake2b_final(struct shash_desc *desc, u8 *out) memcpy(out, state->h, digestsize); return 0; } +EXPORT_SYMBOL_GPL(__crypto_blake2b_final); #define BLAKE2B_ALG(name, driver_name, digest_size) \ { \ @@ -246,10 +256,10 @@ static int blake2b_final(struct shash_desc *desc, u8 *out) .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ .base.cra_module = THIS_MODULE, \ .digestsize = digest_size, \ - .setkey = blake2b_setkey, \ - .init = blake2b_init, \ - .update = blake2b_update, \ - .final = blake2b_final, \ + .setkey = crypto_blake2b_setkey, \ + .init = crypto_blake2b_init, \ + .update = crypto_blake2b_update, \ + .final = crypto_blake2b_final, \ .descsize = sizeof(struct blake2b_state), \ } diff --git a/include/crypto/blake2b.h b/include/crypto/blake2b.h new file mode 100644 index 0000000000000..ced3ba5b45c8d --- /dev/null +++ b/include/crypto/blake2b.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _CRYPTO_BLAKE2B_H +#define _CRYPTO_BLAKE2B_H + +#include <linux/types.h> + +enum blake2b_lengths { + BLAKE2B_BLOCK_SIZE = 128, + BLAKE2B_KEY_SIZE = 64, + + BLAKE2B_160_HASH_SIZE = 20, + BLAKE2B_256_HASH_SIZE = 32, + BLAKE2B_384_HASH_SIZE = 48, + BLAKE2B_512_HASH_SIZE = 64, +}; + +struct blake2b_state { + /* 'h', 't', and 'f' are used in assembly code, so keep them as-is. */ + u64 h[8]; + u64 t[2]; + u64 f[2]; + u8 buf[BLAKE2B_BLOCK_SIZE]; + size_t buflen; +}; + +struct blake2b_tfm_ctx { + u8 key[BLAKE2B_KEY_SIZE]; + unsigned int keylen; +}; + +typedef void (*blake2b_compress_blocks_t)(struct blake2b_state *S, + const u8 *in, size_t nblocks, + unsigned int inc); + +struct crypto_shash; +struct shash_desc; + +int crypto_blake2b_setkey(struct crypto_shash *tfm, const u8 *key, + unsigned int keylen); + +int crypto_blake2b_init(struct shash_desc *desc); + +int crypto_blake2b_update(struct shash_desc *desc, + const u8 *in, unsigned int inlen); +int __crypto_blake2b_update(struct shash_desc *desc, + const u8 *in, unsigned int inlen, + blake2b_compress_blocks_t compress); + +int crypto_blake2b_final(struct shash_desc *desc, u8 *out); +int __crypto_blake2b_final(struct shash_desc *desc, u8 *out, + blake2b_compress_blocks_t compress); + +#endif /* _CRYPTO_BLAKE2B_H */ -- 2.29.2 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations 2020-12-15 23:47 ` [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations Eric Biggers @ 2020-12-17 17:15 ` David Sterba 2020-12-17 22:33 ` Eric Biggers 0 siblings, 1 reply; 17+ messages in thread From: David Sterba @ 2020-12-17 17:15 UTC (permalink / raw) To: Eric Biggers Cc: linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:06PM -0800, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > In preparation for adding architecture-specific implementations of > BLAKE2b, create a header <crypto/blake2b.h> that contains common > constants, structs, and helper functions for BLAKE2b. > > Furthermore, export the BLAKE2b generic setkey(), init(), update(), and > final() functions, and add functions __crypto_blake2b_update() and > __crypto_blake2b_final() which take a pointer to a > blake2b_compress_blocks_t function. > > This way, optimized implementations of BLAKE2b only have to provide an > implementation of blake2b_compress_blocks_t. (This is modeled on how > the nhpoly1305 implementations work. Also, the prototype of > blake2b_compress_blocks_t is meant to be similar to that of > blake2s_compress_arch().) > > Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Sterba <dsterba@suse.com> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations 2020-12-17 17:15 ` David Sterba @ 2020-12-17 22:33 ` Eric Biggers 0 siblings, 0 replies; 17+ messages in thread From: Eric Biggers @ 2020-12-17 22:33 UTC (permalink / raw) To: dsterba, linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Thu, Dec 17, 2020 at 06:15:40PM +0100, David Sterba wrote: > On Tue, Dec 15, 2020 at 03:47:06PM -0800, Eric Biggers wrote: > > From: Eric Biggers <ebiggers@google.com> > > > > In preparation for adding architecture-specific implementations of > > BLAKE2b, create a header <crypto/blake2b.h> that contains common > > constants, structs, and helper functions for BLAKE2b. > > > > Furthermore, export the BLAKE2b generic setkey(), init(), update(), and > > final() functions, and add functions __crypto_blake2b_update() and > > __crypto_blake2b_final() which take a pointer to a > > blake2b_compress_blocks_t function. > > > > This way, optimized implementations of BLAKE2b only have to provide an > > implementation of blake2b_compress_blocks_t. (This is modeled on how > > the nhpoly1305 implementations work. Also, the prototype of > > blake2b_compress_blocks_t is meant to be similar to that of > > blake2s_compress_arch().) > > > > Signed-off-by: Eric Biggers <ebiggers@google.com> > > Reviewed-by: David Sterba <dsterba@suse.com> I ended up making some changes to this patch in v2, to keep things consistent with what I decided to do for BLAKE2s, so I didn't add your Reviewed-by to this patch. If you could review the new version too that would be great -- thanks! - Eric ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 4/5] crypto: blake2b - update file comment 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers ` (2 preceding siblings ...) 2020-12-15 23:47 ` [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations Eric Biggers @ 2020-12-15 23:47 ` Eric Biggers 2020-12-17 17:17 ` David Sterba 2020-12-15 23:47 ` [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation Eric Biggers 2020-12-16 20:47 ` [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley From: Eric Biggers <ebiggers@google.com> The file comment for blake2b_generic.c makes it sound like it's the reference implementation of BLAKE2b with only minor changes. But it's actually been changed a lot. Update the comment to make this clearer. Signed-off-by: Eric Biggers <ebiggers@google.com> --- crypto/blake2b_generic.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/crypto/blake2b_generic.c b/crypto/blake2b_generic.c index fd5159b7aa9f2..c82a12dd47f17 100644 --- a/crypto/blake2b_generic.c +++ b/crypto/blake2b_generic.c @@ -1,21 +1,18 @@ // SPDX-License-Identifier: (GPL-2.0-only OR Apache-2.0) /* - * BLAKE2b reference source code package - reference C implementations + * Generic implementation of the BLAKE2b digest algorithm. Based on the BLAKE2b + * reference implementation, but it has been heavily modified for use in the + * kernel. The reference implementation was: * - * Copyright 2012, Samuel Neves <sneves@dei.uc.pt>. You may use this under the - * terms of the CC0, the OpenSSL Licence, or the Apache Public License 2.0, at - * your option. The terms of these licenses can be found at: + * Copyright 2012, Samuel Neves <sneves@dei.uc.pt>. You may use this under + * the terms of the CC0, the OpenSSL Licence, or the Apache Public License + * 2.0, at your option. The terms of these licenses can be found at: * - * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 - * - OpenSSL license : https://www.openssl.org/source/license.html - * - Apache 2.0 : https://www.apache.org/licenses/LICENSE-2.0 + * - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0 + * - OpenSSL license : https://www.openssl.org/source/license.html + * - Apache 2.0 : https://www.apache.org/licenses/LICENSE-2.0 * - * More information about the BLAKE2 hash function can be found at - * https://blake2.net. - * - * Note: the original sources have been modified for inclusion in linux kernel - * in terms of coding style, using generic helpers and simplifications of error - * handling. + * More information about BLAKE2 can be found at https://blake2.net. */ #include <asm/unaligned.h> -- 2.29.2 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 4/5] crypto: blake2b - update file comment 2020-12-15 23:47 ` [PATCH 4/5] crypto: blake2b - update file comment Eric Biggers @ 2020-12-17 17:17 ` David Sterba 0 siblings, 0 replies; 17+ messages in thread From: David Sterba @ 2020-12-17 17:17 UTC (permalink / raw) To: Eric Biggers Cc: linux-crypto, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:07PM -0800, Eric Biggers wrote: > From: Eric Biggers <ebiggers@google.com> > > The file comment for blake2b_generic.c makes it sound like it's the > reference implementation of BLAKE2b with only minor changes. But it's > actually been changed a lot. Update the comment to make this clearer. After your changes I agree it appropriate to reword it. > Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: David Sterba <dsterba@suse.com> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers ` (3 preceding siblings ...) 2020-12-15 23:47 ` [PATCH 4/5] crypto: blake2b - update file comment Eric Biggers @ 2020-12-15 23:47 ` Eric Biggers 2020-12-16 20:57 ` Eric Biggers 2020-12-16 20:47 ` [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-15 23:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley From: Eric Biggers <ebiggers@google.com> Add a NEON-optimized implementation of BLAKE2b. On Cortex-A7 (which these days is the most common ARM processor that doesn't have the ARMv8 Crypto Extensions), this is over twice as fast as SHA-256, and slightly faster than SHA-1. It is also almost three times as fast as the generic implementation of BLAKE2b: Algorithm Cycles per byte (on 4096-byte messages) =================== ======================================= blake2b-256-neon 14.1 sha1-neon 16.4 sha1-asm 20.8 blake2s-256-generic 26.1 sha256-neon 28.9 sha256-asm 32.1 blake2b-256-generic 39.9 This implementation isn't directly based on any other implementation, but it borrows some ideas from previous NEON code I've written as well as from chacha-neon-core.S. At least on Cortex-A7, it is faster than the other NEON implementations of BLAKE2b I'm aware of (the implementation in the BLAKE2 official repository using intrinsics, and Andrew Moon's implementation which can be found in SUPERCOP). NEON-optimized BLAKE2b is useful because there is interest in using BLAKE2b-256 for dm-verity on low-end Android devices (specifically, devices that lack the ARMv8 Crypto Extensions) to replace SHA-1. On these devices, the performance cost of upgrading to SHA-256 may be unacceptable, whereas BLAKE2b-256 would actually improve performance. Although BLAKE2b is intended for 64-bit platforms (unlike BLAKE2s which is intended for 32-bit platforms), on 32-bit ARM processors with NEON, BLAKE2b is actually faster than BLAKE2s. This is because NEON supports 64-bit operations, and because BLAKE2s's block size is too small for NEON to be helpful for it. The best I've been able to do with BLAKE2s on Cortex-A7 is 19.0 cpb with an optimized scalar implementation. (I didn't try BLAKE2sp and BLAKE3, which in theory would be faster, but they're more complex as they require running multiple hashes at once. Note that BLAKE2b already uses all the NEON bandwidth on the Cortex-A7, so I expect that any speedup from BLAKE2sp or BLAKE3 would come only from the smaller number of rounds, not from the extra parallelism.) Signed-off-by: Eric Biggers <ebiggers@google.com> --- arch/arm/crypto/Kconfig | 10 + arch/arm/crypto/Makefile | 2 + arch/arm/crypto/blake2b-neon-core.S | 357 ++++++++++++++++++++++++++++ arch/arm/crypto/blake2b-neon-glue.c | 105 ++++++++ 4 files changed, 474 insertions(+) create mode 100644 arch/arm/crypto/blake2b-neon-core.S create mode 100644 arch/arm/crypto/blake2b-neon-glue.c diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index c9bf2df85cb90..f6a14c186b4ec 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -62,6 +62,16 @@ config CRYPTO_SHA512_ARM SHA-512 secure hash standard (DFIPS 180-2) implemented using optimized ARM assembler and NEON, when available. +config CRYPTO_BLAKE2B_NEON + tristate "BLAKE2b digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_BLAKE2B + help + BLAKE2b digest algorithm optimized with ARM NEON instructions. + On ARM processors that have NEON support but not the ARMv8 + Crypto Extensions, typically this BLAKE2b implementation is + much faster than SHA-2 and slightly faster than SHA-1. + config CRYPTO_AES_ARM tristate "Scalar AES cipher for ARM" select CRYPTO_ALGAPI diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index b745c17d356fe..ab835ceeb4f2e 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o +obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o @@ -29,6 +30,7 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y) sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y) +blake2b-neon-y := blake2b-neon-core.o blake2b-neon-glue.o sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o diff --git a/arch/arm/crypto/blake2b-neon-core.S b/arch/arm/crypto/blake2b-neon-core.S new file mode 100644 index 0000000000000..734d9d3a161f7 --- /dev/null +++ b/arch/arm/crypto/blake2b-neon-core.S @@ -0,0 +1,357 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * BLAKE2b digest algorithm, NEON accelerated + * + * Copyright 2020 Google LLC + * + * Author: Eric Biggers <ebiggers@google.com> + */ + +#include <linux/linkage.h> + + .text + .fpu neon + + // The arguments to blake2b_compress_blocks_neon() + STATE .req r0 + IN .req r1 + NBLOCKS .req r2 + INC .req r3 + + // Pointers to the rotation tables + ROR24_TABLE .req r4 + ROR16_TABLE .req r5 + + // The original stack pointer + ORIG_SP .req r6 + + // NEON registers which contain the message words of the current block. + // M_0-M_3 are occasionally used for other purposes too. + M_0 .req d16 + M_1 .req d17 + M_2 .req d18 + M_3 .req d19 + M_4 .req d20 + M_5 .req d21 + M_6 .req d22 + M_7 .req d23 + M_8 .req d24 + M_9 .req d25 + M_10 .req d26 + M_11 .req d27 + M_12 .req d28 + M_13 .req d29 + M_14 .req d30 + M_15 .req d31 + + .align 4 + // Tables for computing ror64(x, 24) and ror64(x, 16) using the vtbl.8 + // instruction. This is the most efficient way to implement these + // rotation amounts with NEON. (On Cortex-A53 it's the same speed as + // vshr.u64 + vsli.u64, while on Cortex-A7 it's faster.) +.Lror24_table: + .byte 3, 4, 5, 6, 7, 0, 1, 2 +.Lror16_table: + .byte 2, 3, 4, 5, 6, 7, 0, 1 + // The BLAKE2b initialization vector +.Lblake2b_IV: + .quad 0x6a09e667f3bcc908, 0xbb67ae8584caa73b + .quad 0x3c6ef372fe94f82b, 0xa54ff53a5f1d36f1 + .quad 0x510e527fade682d1, 0x9b05688c2b3e6c1f + .quad 0x1f83d9abfb41bd6b, 0x5be0cd19137e2179 + +// Execute one round of BLAKE2b by updating the state matrix v[0..15] in the +// NEON registers q0-q7. The message block is in q8..q15. The stack pointer +// points to a 32-byte aligned buffer containing a copy of q8 and q9, so that +// they can be reloaded if q8 and q9 are used as temporary registers. The macro +// arguments s0-s15 give the order in which the message words are used in this +// round. 'final' is "true" if this is the final round, i.e. round 12 of 12. +.macro _blake2b_round s0, s1, s2, s3, s4, s5, s6, s7, \ + s8, s9, s10, s11, s12, s13, s14, s15, final="false" + + // Mix the columns: + // (v[0], v[4], v[8], v[12]), (v[1], v[5], v[9], v[13]), + // (v[2], v[6], v[10], v[14]), and (v[3], v[7], v[11], v[15]). + + // a += b + m[blake2b_sigma[r][2*i + 0]]; + vadd.u64 q0, q0, q2 + vadd.u64 q1, q1, q3 + vadd.u64 d0, d0, M_\s0 + vadd.u64 d1, d1, M_\s2 + vadd.u64 d2, d2, M_\s4 + vadd.u64 d3, d3, M_\s6 + + // d = ror64(d ^ a, 32); + veor q6, q6, q0 + veor q7, q7, q1 + vrev64.32 q6, q6 + vrev64.32 q7, q7 + + // c += d; + vadd.u64 q4, q4, q6 + vadd.u64 q5, q5, q7 + + // b = ror64(b ^ c, 24); + vld1.8 {M_0}, [ROR24_TABLE, :64] + veor q2, q2, q4 + veor q3, q3, q5 + vtbl.8 d4, {d4}, M_0 + vtbl.8 d5, {d5}, M_0 + vtbl.8 d6, {d6}, M_0 + vtbl.8 d7, {d7}, M_0 + + // a += b + m[blake2b_sigma[r][2*i + 1]]; + // + // M_0 got clobbered above, so we have to reload it if any of the four + // message words this step needs happens to be M_0. Otherwise we don't + // need to reload it here, as it will just get clobbered again below. +.if \s1 == 0 || \s3 == 0 || \s5 == 0 || \s7 == 0 + vld1.8 {M_0}, [sp, :64] +.endif + vadd.u64 q0, q0, q2 + vadd.u64 q1, q1, q3 + vadd.u64 d0, d0, M_\s1 + vadd.u64 d1, d1, M_\s3 + vadd.u64 d2, d2, M_\s5 + vadd.u64 d3, d3, M_\s7 + + // d = ror64(d ^ a, 16); + vld1.8 {M_0}, [ROR16_TABLE, :64] + veor q6, q6, q0 + veor q7, q7, q1 + vtbl.8 d12, {d12}, M_0 + vtbl.8 d13, {d13}, M_0 + vtbl.8 d14, {d14}, M_0 + vtbl.8 d15, {d15}, M_0 + + // c += d; + vadd.u64 q4, q4, q6 + vadd.u64 q5, q5, q7 + + // b = ror64(b ^ c, 63); + // + // This rotation amount isn't a multiple of 8, so it has to be + // implemented using a pair of shifts, which requires temporary + // registers. Use q8-q9 (M_0-M_3) for this, and reload them afterwards. + veor q8, q2, q4 + veor q9, q3, q5 + vshr.u64 q2, q8, #63 + vshr.u64 q3, q9, #63 + vsli.u64 q2, q8, #1 + vsli.u64 q3, q9, #1 + vld1.8 {q8-q9}, [sp, :256] + + // Mix the diagonals: + // (v[0], v[5], v[10], v[15]), (v[1], v[6], v[11], v[12]), + // (v[2], v[7], v[8], v[13]), and (v[3], v[4], v[9], v[14]). + // + // There are two possible ways to do this: use 'vext' instructions to + // shift the rows of the matrix so that the diagonals become columns, + // and undo it afterwards; or just use 64-bit operations on 'd' + // registers instead of 128-bit operations on 'q' registers. We use the + // latter approach, as it performs much better on Cortex-A7. + + // a += b + m[blake2b_sigma[r][2*i + 0]]; + vadd.u64 d0, d0, d5 + vadd.u64 d1, d1, d6 + vadd.u64 d2, d2, d7 + vadd.u64 d3, d3, d4 + vadd.u64 d0, d0, M_\s8 + vadd.u64 d1, d1, M_\s10 + vadd.u64 d2, d2, M_\s12 + vadd.u64 d3, d3, M_\s14 + + // d = ror64(d ^ a, 32); + veor d15, d15, d0 + veor d12, d12, d1 + veor d13, d13, d2 + veor d14, d14, d3 + vrev64.32 d15, d15 + vrev64.32 d12, d12 + vrev64.32 d13, d13 + vrev64.32 d14, d14 + + // c += d; + vadd.u64 d10, d10, d15 + vadd.u64 d11, d11, d12 + vadd.u64 d8, d8, d13 + vadd.u64 d9, d9, d14 + + // b = ror64(b ^ c, 24); + vld1.8 {M_0}, [ROR24_TABLE, :64] + veor d5, d5, d10 + veor d6, d6, d11 + veor d7, d7, d8 + veor d4, d4, d9 + vtbl.8 d5, {d5}, M_0 + vtbl.8 d6, {d6}, M_0 + vtbl.8 d7, {d7}, M_0 + vtbl.8 d4, {d4}, M_0 + + // a += b + m[blake2b_sigma[r][2*i + 1]]; +.if \s9 == 0 || \s11 == 0 || \s13 == 0 || \s15 == 0 + vld1.8 {M_0}, [sp, :64] +.endif + vadd.u64 d0, d0, d5 + vadd.u64 d1, d1, d6 + vadd.u64 d2, d2, d7 + vadd.u64 d3, d3, d4 + vadd.u64 d0, d0, M_\s9 + vadd.u64 d1, d1, M_\s11 + vadd.u64 d2, d2, M_\s13 + vadd.u64 d3, d3, M_\s15 + + // d = ror64(d ^ a, 16); + vld1.8 {M_0}, [ROR16_TABLE, :64] + veor d15, d15, d0 + veor d12, d12, d1 + veor d13, d13, d2 + veor d14, d14, d3 + vtbl.8 d12, {d12}, M_0 + vtbl.8 d13, {d13}, M_0 + vtbl.8 d14, {d14}, M_0 + vtbl.8 d15, {d15}, M_0 + + // c += d; + vadd.u64 d10, d10, d15 + vadd.u64 d11, d11, d12 + vadd.u64 d8, d8, d13 + vadd.u64 d9, d9, d14 + + // b = ror64(b ^ c, 63); + veor d16, d4, d9 + veor d17, d5, d10 + veor d18, d6, d11 + veor d19, d7, d8 + vshr.u64 q2, q8, #63 + vshr.u64 q3, q9, #63 + vsli.u64 q2, q8, #1 + vsli.u64 q3, q9, #1 + // Reloading q8-q9 can be skipped on the final round. +.if \final != "true" + vld1.8 {q8-q9}, [sp, :256] +.endif +.endm + +// +// void blake2b_compress_blocks_neon(struct blake2b_state *S, +// const u8 *in, size_t nblocks, +// unsigned int inc); +// +// Only the first three fields of struct blake2b_state are used: +// u64 h[8]; (inout) +// u64 t[2]; (in) +// u64 f[2]; (in) +// + .align 5 +ENTRY(blake2b_compress_blocks_neon) + push {r4-r10} + + // Allocate a 32-byte stack buffer that is 32-byte aligned. + mov ORIG_SP, sp + sub ip, sp, #32 + bic ip, ip, #31 + mov sp, ip + + adr ROR24_TABLE, .Lror24_table + adr ROR16_TABLE, .Lror16_table + + mov ip, STATE + vld1.64 {q0-q1}, [ip]! // Load h[0..3] + vld1.64 {q2-q3}, [ip]! // Load h[4..7] +.Lnext_block: + adr r10, .Lblake2b_IV + vld1.64 {q14-q15}, [ip] // Load t[0..1] and f[0..1] + vld1.64 {q4-q5}, [r10]! // Load IV[0..3] + vmov r7, r8, d28 // Copy t[0] to (r7, r8) + vld1.64 {q6-q7}, [r10] // Load IV[4..7] + adds r7, r7, INC // Increment counter + bcs .Lslow_inc_ctr + vmov.i32 d28[0], r7 + vst1.64 {d28}, [ip] // Update t[0] +.Linc_ctr_done: + + // Load the next message block and finish initializing the state matrix + // 'v'. Fortunately, there are exactly enough NEON registers to fit the + // entire state matrix in q0-q7 and the entire message block in q8-15. + // + // However, _blake2b_round also needs some extra registers for rotates, + // so we have to spill some registers. It's better to spill the message + // registers than the state registers, as the message doesn't change. + // Therefore we store a copy of the first 32 bytes of the message block + // (q8-q9) in an aligned buffer on the stack so that they can be + // reloaded when needed. (We could just reload directly from the + // message buffer, but it's faster to use aligned loads.) + vld1.8 {q8-q9}, [IN]! + veor q6, q6, q14 // v[12..13] = IV[4..5] ^ t[0..1] + vld1.8 {q10-q11}, [IN]! + veor q7, q7, q15 // v[14..15] = IV[6..7] ^ f[0..1] + vld1.8 {q12-q13}, [IN]! + vst1.8 {q8-q9}, [sp, :256] + mov ip, STATE + vld1.8 {q14-q15}, [IN]! + + // Execute the rounds. Each round is provided the order in which it + // needs to use the message words. + _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, \ + 8, 9, 10, 11, 12, 13, 14, 15 + _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, \ + 1, 12, 0, 2, 11, 7, 5, 3 + _blake2b_round 11, 8, 12, 0, 5, 2, 15, 13, \ + 10, 14, 3, 6, 7, 1, 9, 4 + _blake2b_round 7, 9, 3, 1, 13, 12, 11, 14, \ + 2, 6, 5, 10, 4, 0, 15, 8 + _blake2b_round 9, 0, 5, 7, 2, 4, 10, 15, \ + 14, 1, 11, 12, 6, 8, 3, 13 + _blake2b_round 2, 12, 6, 10, 0, 11, 8, 3, \ + 4, 13, 7, 5, 15, 14, 1, 9 + _blake2b_round 12, 5, 1, 15, 14, 13, 4, 10, \ + 0, 7, 6, 3, 9, 2, 8, 11 + _blake2b_round 13, 11, 7, 14, 12, 1, 3, 9, \ + 5, 0, 15, 4, 8, 6, 2, 10 + _blake2b_round 6, 15, 14, 9, 11, 3, 0, 8, \ + 12, 2, 13, 7, 1, 4, 10, 5 + _blake2b_round 10, 2, 8, 4, 7, 6, 1, 5, \ + 15, 11, 9, 14, 3, 12, 13, 0 + _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, \ + 8, 9, 10, 11, 12, 13, 14, 15 + _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, \ + 1, 12, 0, 2, 11, 7, 5, 3, "true" + + // Fold the final state matrix into the hash chaining value: + // + // for (i = 0; i < 8; i++) + // h[i] ^= v[i] ^ v[i + 8]; + // + vld1.64 {q8-q9}, [ip]! // Load old h[0..3] + veor q0, q0, q4 // v[0..1] ^= v[8..9] + veor q1, q1, q5 // v[2..3] ^= v[10..11] + vld1.64 {q10-q11}, [ip] // Load old h[4..7] + veor q2, q2, q6 // v[4..5] ^= v[12..13] + veor q3, q3, q7 // v[6..7] ^= v[14..15] + veor q0, q0, q8 // v[0..1] ^= h[0..1] + veor q1, q1, q9 // v[2..3] ^= h[2..3] + mov ip, STATE + subs NBLOCKS, NBLOCKS, #1 // nblocks-- + vst1.64 {q0-q1}, [ip]! // Store new h[0..3] + veor q2, q2, q10 // v[4..5] ^= h[4..5] + veor q3, q3, q11 // v[6..7] ^= h[6..7] + vst1.64 {q2-q3}, [ip]! // Store new h[4..7] + bne .Lnext_block // nblocks != 0? + + mov sp, ORIG_SP + pop {r4-r10} + mov pc, lr + +.Lslow_inc_ctr: + // Handle the case where the counter overflowed its low 32 bits, by + // carrying the overflow bit into the full 128-bit counter. + vmov r9, r10, d29 + adcs r8, r8, #0 + adcs r9, r9, #0 + adc r10, r10, #0 + vmov d28, r7, r8 + vmov d29, r9, r10 + vst1.64 {q14}, [ip] // Update t[0] and t[1] + b .Linc_ctr_done +ENDPROC(blake2b_compress_blocks_neon) diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c new file mode 100644 index 0000000000000..27620d7a8bcb7 --- /dev/null +++ b/arch/arm/crypto/blake2b-neon-glue.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BLAKE2b digest algorithm, NEON accelerated + * + * Copyright 2020 Google LLC + */ + +#include <asm/neon.h> +#include <asm/simd.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> +#include <crypto/blake2b.h> +#include <linux/module.h> + +asmlinkage void blake2b_compress_blocks_neon(struct blake2b_state *S, + const u8 *in, size_t nblocks, + unsigned int inc); + +static int blake2b_neon_update(struct shash_desc *desc, + const u8 *in, unsigned int inlen) +{ + struct blake2b_state *S = shash_desc_ctx(desc); + + if (S->buflen + inlen < BLAKE2B_BLOCK_SIZE || !crypto_simd_usable()) + return crypto_blake2b_update(desc, in, inlen); + + do { + unsigned int n = min_t(unsigned int, inlen, SZ_4K); + + kernel_neon_begin(); + __crypto_blake2b_update(desc, in, n, + blake2b_compress_blocks_neon); + kernel_neon_end(); + in += n; + inlen -= n; + } while (inlen); + return 0; +} + +static int blake2b_neon_final(struct shash_desc *desc, u8 *out) +{ + int err; + + if (!crypto_simd_usable()) + return crypto_blake2b_final(desc, out); + + kernel_neon_begin(); + err = __crypto_blake2b_final(desc, out, blake2b_compress_blocks_neon); + kernel_neon_end(); + return err; +} + +#define BLAKE2B_ALG(name, driver_name, digest_size) \ + { \ + .base.cra_name = name, \ + .base.cra_driver_name = driver_name, \ + .base.cra_priority = 200, \ + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \ + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, \ + .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ + .base.cra_module = THIS_MODULE, \ + .digestsize = digest_size, \ + .setkey = crypto_blake2b_setkey, \ + .init = crypto_blake2b_init, \ + .update = blake2b_neon_update, \ + .final = blake2b_neon_final, \ + .descsize = sizeof(struct blake2b_state), \ + } + +static struct shash_alg blake2b_neon_algs[] = { + BLAKE2B_ALG("blake2b-160", "blake2b-160-neon", BLAKE2B_160_HASH_SIZE), + BLAKE2B_ALG("blake2b-256", "blake2b-256-neon", BLAKE2B_256_HASH_SIZE), + BLAKE2B_ALG("blake2b-384", "blake2b-384-neon", BLAKE2B_384_HASH_SIZE), + BLAKE2B_ALG("blake2b-512", "blake2b-512-neon", BLAKE2B_512_HASH_SIZE), +}; + +static int __init blake2b_neon_mod_init(void) +{ + if (!(elf_hwcap & HWCAP_NEON)) + return -ENODEV; + + return crypto_register_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); +} + +static void __exit blake2b_neon_mod_exit(void) +{ + return crypto_unregister_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); +} + +module_init(blake2b_neon_mod_init); +module_exit(blake2b_neon_mod_exit); + +MODULE_DESCRIPTION("BLAKE2b digest algorithm, NEON accelerated"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>"); +MODULE_ALIAS_CRYPTO("blake2b-160"); +MODULE_ALIAS_CRYPTO("blake2b-160-neon"); +MODULE_ALIAS_CRYPTO("blake2b-256"); +MODULE_ALIAS_CRYPTO("blake2b-256-neon"); +MODULE_ALIAS_CRYPTO("blake2b-384"); +MODULE_ALIAS_CRYPTO("blake2b-384-neon"); +MODULE_ALIAS_CRYPTO("blake2b-512"); +MODULE_ALIAS_CRYPTO("blake2b-512-neon"); -- 2.29.2 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation 2020-12-15 23:47 ` [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation Eric Biggers @ 2020-12-16 20:57 ` Eric Biggers 0 siblings, 0 replies; 17+ messages in thread From: Eric Biggers @ 2020-12-16 20:57 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:08PM -0800, Eric Biggers wrote: > +// Execute one round of BLAKE2b by updating the state matrix v[0..15] in the > +// NEON registers q0-q7. The message block is in q8..q15. The stack pointer > +// points to a 32-byte aligned buffer containing a copy of q8 and q9, so that > +// they can be reloaded if q8 and q9 are used as temporary registers. The macro > +// arguments s0-s15 give the order in which the message words are used in this > +// round. 'final' is "true" if this is the final round, i.e. round 12 of 12. > +.macro _blake2b_round s0, s1, s2, s3, s4, s5, s6, s7, \ > + s8, s9, s10, s11, s12, s13, s14, s15, final="false" [...] > + // Reloading q8-q9 can be skipped on the final round. > +.if \final != "true" > + vld1.8 {q8-q9}, [sp, :256] > +.endif > +.endm [...] > + _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, \ > + 1, 12, 0, 2, 11, 7, 5, 3, "true" Apparently using the strings "true" and "false" here sometimes causes a build error where they get treated as symbols (https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/2JPD4H3VFBSKWPUCPEPRAXBVMSR2UCQI/), though somehow it worked fine for me. I'll change this to use 1 and 0 instead. - Eric ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/5] crypto: add NEON-optimized BLAKE2b 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers ` (4 preceding siblings ...) 2020-12-15 23:47 ` [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation Eric Biggers @ 2020-12-16 20:47 ` Eric Biggers 2020-12-16 22:32 ` Jason A. Donenfeld 5 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-16 20:47 UTC (permalink / raw) To: linux-crypto Cc: linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Jason A . Donenfeld, Paul Crowley On Tue, Dec 15, 2020 at 03:47:03PM -0800, Eric Biggers wrote: > This patchset adds a NEON implementation of BLAKE2b for 32-bit ARM. > Patches 1-4 prepare for it by making some updates to the generic > implementation, while patch 5 adds the actual NEON implementation. > > On Cortex-A7 (which these days is the most common ARM processor that > doesn't have the ARMv8 Crypto Extensions), this is over twice as fast as > SHA-256, and slightly faster than SHA-1. It is also almost three times > as fast as the generic implementation of BLAKE2b: > > Algorithm Cycles per byte (on 4096-byte messages) > =================== ======================================= > blake2b-256-neon 14.1 > sha1-neon 16.4 > sha1-asm 20.8 > blake2s-256-generic 26.1 > sha256-neon 28.9 > sha256-asm 32.1 > blake2b-256-generic 39.9 > > This implementation isn't directly based on any other implementation, > but it borrows some ideas from previous NEON code I've written as well > as from chacha-neon-core.S. At least on Cortex-A7, it is faster than > the other NEON implementations of BLAKE2b I'm aware of (the > implementation in the BLAKE2 official repository using intrinsics, and > Andrew Moon's implementation which can be found in SUPERCOP). > > NEON-optimized BLAKE2b is useful because there is interest in using > BLAKE2b-256 for dm-verity on low-end Android devices (specifically, > devices that lack the ARMv8 Crypto Extensions) to replace SHA-1. On > these devices, the performance cost of upgrading to SHA-256 may be > unacceptable, whereas BLAKE2b-256 would actually improve performance. > > Although BLAKE2b is intended for 64-bit platforms (unlike BLAKE2s which > is intended for 32-bit platforms), on 32-bit ARM processors with NEON, > BLAKE2b is actually faster than BLAKE2s. This is because NEON supports > 64-bit operations, and because BLAKE2s's block size is too small for > NEON to be helpful for it. The best I've been able to do with BLAKE2s > on Cortex-A7 is 19.0 cpb with an optimized scalar implementation. By the way, if people are interested in having my ARM scalar implementation of BLAKE2s in the kernel too, I can send a patchset for that too. It just ended up being slower than BLAKE2b and SHA-1, so it wasn't as good for the use case mentioned above. If it were to be added as "blake2s-256-arm", we'd have: Algorithm Cycles per byte (on 4096-byte messages) =================== ======================================= blake2b-256-neon 14.1 sha1-neon 16.4 blake2s-256-arm 19.0 sha1-asm 20.8 blake2s-256-generic 26.1 sha256-neon 28.9 sha256-asm 32.1 blake2b-256-generic 39.9 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/5] crypto: add NEON-optimized BLAKE2b 2020-12-16 20:47 ` [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers @ 2020-12-16 22:32 ` Jason A. Donenfeld 2020-12-17 3:54 ` Eric Biggers 0 siblings, 1 reply; 17+ messages in thread From: Jason A. Donenfeld @ 2020-12-16 22:32 UTC (permalink / raw) To: Eric Biggers Cc: Linux Crypto Mailing List, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Paul Crowley Hi Eric, On Wed, Dec 16, 2020 at 9:48 PM Eric Biggers <ebiggers@kernel.org> wrote: > By the way, if people are interested in having my ARM scalar implementation of > BLAKE2s in the kernel too, I can send a patchset for that too. It just ended up > being slower than BLAKE2b and SHA-1, so it wasn't as good for the use case > mentioned above. If it were to be added as "blake2s-256-arm", we'd have: I'd certainly be interested in this. Any rough idea how it performs for pretty small messages compared to the generic implementation? 100-140 byte ranges? Is the speedup about the same as for longer messages because this doesn't parallelize across multiple blocks? Jason ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/5] crypto: add NEON-optimized BLAKE2b 2020-12-16 22:32 ` Jason A. Donenfeld @ 2020-12-17 3:54 ` Eric Biggers 2020-12-17 14:01 ` Jason A. Donenfeld 0 siblings, 1 reply; 17+ messages in thread From: Eric Biggers @ 2020-12-17 3:54 UTC (permalink / raw) To: Jason A. Donenfeld Cc: Linux Crypto Mailing List, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Paul Crowley On Wed, Dec 16, 2020 at 11:32:44PM +0100, Jason A. Donenfeld wrote: > Hi Eric, > > On Wed, Dec 16, 2020 at 9:48 PM Eric Biggers <ebiggers@kernel.org> wrote: > > By the way, if people are interested in having my ARM scalar implementation of > > BLAKE2s in the kernel too, I can send a patchset for that too. It just ended up > > being slower than BLAKE2b and SHA-1, so it wasn't as good for the use case > > mentioned above. If it were to be added as "blake2s-256-arm", we'd have: > > I'd certainly be interested in this. Any rough idea how it performs > for pretty small messages compared to the generic implementation? > 100-140 byte ranges? Is the speedup about the same as for longer > messages because this doesn't parallelize across multiple blocks? > It does one block at a time, and there isn't much overhead, so yes the speedup on short messages should be about the same as on long messages. I did a couple quick userspace benchmarks and got (still on Cortex-A7): 100-byte messages: BLAKE2s ARM: 28.9 cpb BLAKE2s generic: 42.4 cpb 140-byte messages: BLAKE2s ARM: 29.5 cpb BLAKE2s generic: 44.0 cpb The results in the kernel may differ a bit, but probably not by much. - Eric ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/5] crypto: add NEON-optimized BLAKE2b 2020-12-17 3:54 ` Eric Biggers @ 2020-12-17 14:01 ` Jason A. Donenfeld 0 siblings, 0 replies; 17+ messages in thread From: Jason A. Donenfeld @ 2020-12-17 14:01 UTC (permalink / raw) To: Eric Biggers Cc: Linux Crypto Mailing List, linux-arm-kernel, Ard Biesheuvel, Herbert Xu, David Sterba, Paul Crowley On Thu, Dec 17, 2020 at 4:54 AM Eric Biggers <ebiggers@kernel.org> wrote: > > On Wed, Dec 16, 2020 at 11:32:44PM +0100, Jason A. Donenfeld wrote: > > Hi Eric, > > > > On Wed, Dec 16, 2020 at 9:48 PM Eric Biggers <ebiggers@kernel.org> wrote: > > > By the way, if people are interested in having my ARM scalar implementation of > > > BLAKE2s in the kernel too, I can send a patchset for that too. It just ended up > > > being slower than BLAKE2b and SHA-1, so it wasn't as good for the use case > > > mentioned above. If it were to be added as "blake2s-256-arm", we'd have: > > > > I'd certainly be interested in this. Any rough idea how it performs > > for pretty small messages compared to the generic implementation? > > 100-140 byte ranges? Is the speedup about the same as for longer > > messages because this doesn't parallelize across multiple blocks? > > > > It does one block at a time, and there isn't much overhead, so yes the speedup > on short messages should be about the same as on long messages. > > I did a couple quick userspace benchmarks and got (still on Cortex-A7): > > 100-byte messages: > BLAKE2s ARM: 28.9 cpb > BLAKE2s generic: 42.4 cpb > > 140-byte messages: > BLAKE2s ARM: 29.5 cpb > BLAKE2s generic: 44.0 cpb > > The results in the kernel may differ a bit, but probably not by much. That's certainly a nice improvement though, and I'd very much welcome the faster implementation. Jason ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2020-12-17 22:34 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-15 23:47 [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 2020-12-15 23:47 ` [PATCH 1/5] crypto: blake2b - rename constants for consistency with blake2s Eric Biggers 2020-12-17 17:13 ` David Sterba 2020-12-15 23:47 ` [PATCH 2/5] crypto: blake2b - define shash_alg structs using macros Eric Biggers 2020-12-17 17:15 ` David Sterba 2020-12-17 18:35 ` Eric Biggers 2020-12-15 23:47 ` [PATCH 3/5] crypto: blake2b - export helpers for optimized implementations Eric Biggers 2020-12-17 17:15 ` David Sterba 2020-12-17 22:33 ` Eric Biggers 2020-12-15 23:47 ` [PATCH 4/5] crypto: blake2b - update file comment Eric Biggers 2020-12-17 17:17 ` David Sterba 2020-12-15 23:47 ` [PATCH 5/5] crypto: arm/blake2b - add NEON-optimized BLAKE2b implementation Eric Biggers 2020-12-16 20:57 ` Eric Biggers 2020-12-16 20:47 ` [PATCH 0/5] crypto: add NEON-optimized BLAKE2b Eric Biggers 2020-12-16 22:32 ` Jason A. Donenfeld 2020-12-17 3:54 ` Eric Biggers 2020-12-17 14:01 ` Jason A. Donenfeld
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).