[PATCH] crypto: caam - adjust RNG timing to support more devices

[PATCH] crypto: caam - adjust RNG timing to support more devices

[meenakshi.aggarwal]

From: Victoria Milhoan <vicki.milhoan@freescale.com>

Adjust RNG timing parameters to support more i.MX6 devices.

Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
---
 drivers/crypto/caam/ctrl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 5fed3cf354c0..62dd069942e4 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int ent_delay)
 	wr_reg32(&r4tst->rtsdctl, val);
 	/* min. freq. count, equal to 1/4 of the entropy sample length */
 	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
-	/* disable maximum frequency count */
-	wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
+	/* max. freq. count, equal to 16 times the entropy sample length */
+	wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
 	/* read the control register */
 	val = rd_reg32(&r4tst->rtmctl);
 start_rng:
-- 
2.25.1

RE: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Gaurav Jain]

Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>

> -----Original Message-----
> From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> Sent: Monday, June 12, 2023 1:56 PM
> To: Horia Geanta <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>;
> Pankaj Gupta <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
> herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Victoria Milhoan <vicki.milhoan@freescale.com>; Dan Douglass
> <dan.douglass@nxp.com>; Vipul Kumar <vipul_kumar@mentor.com>
> Subject: [PATCH] crypto: caam - adjust RNG timing to support more devices
> 
> From: Victoria Milhoan <vicki.milhoan@freescale.com>
> 
> Adjust RNG timing parameters to support more i.MX6 devices.
> 
> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> ---
>  drivers/crypto/caam/ctrl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index
> 5fed3cf354c0..62dd069942e4 100644
> --- a/drivers/crypto/caam/ctrl.c
> +++ b/drivers/crypto/caam/ctrl.c
> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int ent_delay)
>  	wr_reg32(&r4tst->rtsdctl, val);
>  	/* min. freq. count, equal to 1/4 of the entropy sample length */
>  	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
> -	/* disable maximum frequency count */
> -	wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
> +	/* max. freq. count, equal to 16 times the entropy sample length */
> +	wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
>  	/* read the control register */
>  	val = rd_reg32(&r4tst->rtmctl);
>  start_rng:
> --
> 2.25.1

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Herbert Xu]

On Mon, Jun 12, 2023 at 10:26:15AM +0200, meenakshi.aggarwal@nxp.com wrote:
> From: Victoria Milhoan <vicki.milhoan@freescale.com>
> 
> Adjust RNG timing parameters to support more i.MX6 devices.
> 
> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> ---
>  drivers/crypto/caam/ctrl.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Patch applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Bastian Krause]

On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
> From: Victoria Milhoan <vicki.milhoan@freescale.com>
> 
> Adjust RNG timing parameters to support more i.MX6 devices.
> 
> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> ---
>   drivers/crypto/caam/ctrl.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my end:

caam 30900000.crypto: Entropy delay = 3200
caam 30900000.crypto: Entropy delay = 3600
[...]
caam 30900000.crypto: Entropy delay = 12400
caam 30900000.crypto: failed to instantiate RNG
caam: probe of 30900000.crypto failed with error -11

If I revert this patch or increase RTSDCTL_ENT_DLY_MAX to a value > 
66800, it works again:

caam 30900000.crypto: Entropy delay = 32800
caam 30900000.crypto: Entropy delay = 33200
[...]
caam 30900000.crypto: Entropy delay = 66800
caam 30900000.crypto: Instantiated RNG4 SH0
caam 30900000.crypto: Instantiated RNG4 SH1
caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
caam 30900000.crypto: job rings = 2, qi = 0
caam algorithms registered in /proc/crypto
caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
caam 30900000.crypto: registering rng-caam
Executing RNG SELF-TEST with wait
random: crng init done
caam 30900000.crypto: rng crypto API alg registered prng-caam

Regards,
Bastian

> 
> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
> index 5fed3cf354c0..62dd069942e4 100644
> --- a/drivers/crypto/caam/ctrl.c
> +++ b/drivers/crypto/caam/ctrl.c
> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int ent_delay)
>   	wr_reg32(&r4tst->rtsdctl, val);
>   	/* min. freq. count, equal to 1/4 of the entropy sample length */
>   	wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
> -	/* disable maximum frequency count */
> -	wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
> +	/* max. freq. count, equal to 16 times the entropy sample length */
> +	wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
>   	/* read the control register */
>   	val = rd_reg32(&r4tst->rtmctl);
>   start_rng:

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Bastian Krause]

On 7/17/23 14:43, Bastian Krause wrote:
> On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
>> From: Victoria Milhoan <vicki.milhoan@freescale.com>
>>
>> Adjust RNG timing parameters to support more i.MX6 devices.
>>
>> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
>> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
>> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
>> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
>> ---
>>   drivers/crypto/caam/ctrl.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my end:
> 
> caam 30900000.crypto: Entropy delay = 3200
> caam 30900000.crypto: Entropy delay = 3600
> [...]
> caam 30900000.crypto: Entropy delay = 12400
> caam 30900000.crypto: failed to instantiate RNG
> caam: probe of 30900000.crypto failed with error -11
> 
> If I revert this patch or increase RTSDCTL_ENT_DLY_MAX to a value > 
> 66800, it works again:
> 
> caam 30900000.crypto: Entropy delay = 32800
> caam 30900000.crypto: Entropy delay = 33200
> [...]
> caam 30900000.crypto: Entropy delay = 66800
> caam 30900000.crypto: Instantiated RNG4 SH0
> caam 30900000.crypto: Instantiated RNG4 SH1
> caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
> caam 30900000.crypto: job rings = 2, qi = 0
> caam algorithms registered in /proc/crypto
> caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
> caam 30900000.crypto: registering rng-caam
> Executing RNG SELF-TEST with wait
> random: crng init done
> caam 30900000.crypto: rng crypto API alg registered prng-caam

This ^ was the kernel log for..


--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@@ -522,7 -522,7 +522,7 @@@ struct rng4tst
   #define RTSDCTL_ENT_DLY_SHIFT 16
   #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
   #define RTSDCTL_ENT_DLY_MIN 3200
--#define RTSDCTL_ENT_DLY_MAX 12800
++#define RTSDCTL_ENT_DLY_MAX 70000
   #define RTSDCTL_SAMP_SIZE_MASK 0xffff
   #define RTSDCTL_SAMP_SIZE_VAL 512
         u32 rtsdctl;            /* seed control register */


For completion's sake: Reverting this patch..


--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -383,7 +383,7 @@ static void kick_trng(struct device *dev, int ent_delay)
                 /* min. freq. count, equal to 1/4 of the entropy sample length */
                 wr_reg32(&r4tst->rtfrqmin, val >> 2);
                 /* max. freq. count, equal to 16 times the entropy sample length */
-               wr_reg32(&r4tst->rtfrqmax, val << 4);
+               wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
         }
  
         wr_reg32(&r4tst->rtsdctl, (val << RTSDCTL_ENT_DLY_SHIFT) |


..produces this kernel log (without RNG SELF-TEST):

caam 30900000.crypto: Entropy delay = 3200
caam 30900000.crypto: Entropy delay = 3600
caam 30900000.crypto: Instantiated RNG4 SH0
caam 30900000.crypto: Instantiated RNG4 SH1
caam 30900000.crypto: device ID = 0x0a16040100000000 (Era 9)
caam 30900000.crypto: job rings = 2, qi = 0
caam algorithms registered in /proc/crypto
caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto
caam 30900000.crypto: registering rng-caam
caam 30900000.crypto: rng crypto API alg registered prng-caam
random: crng init done

Regards,
Bastian

>>
>> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
>> index 5fed3cf354c0..62dd069942e4 100644
>> --- a/drivers/crypto/caam/ctrl.c
>> +++ b/drivers/crypto/caam/ctrl.c
>> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int 
>> ent_delay)
>>       wr_reg32(&r4tst->rtsdctl, val);
>>       /* min. freq. count, equal to 1/4 of the entropy sample length */
>>       wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
>> -    /* disable maximum frequency count */
>> -    wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
>> +    /* max. freq. count, equal to 16 times the entropy sample length */
>> +    wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
>>       /* read the control register */
>>       val = rd_reg32(&r4tst->rtmctl);
>>   start_rng:
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

RE: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Meenakshi Aggarwal]

Hi Bastian,

We have tested the patch on i.mx8mm board and we did not face any issue with the patch.

Please share your imx8mm board revision and complete logs (including bootloader logs),
It will help in investigating the issue you are facing.

Thanks,
Meenakshi

> -----Original Message-----
> From: Bastian Krause <bst@pengutronix.de>
> Sent: Tuesday, July 18, 2023 3:13 PM
> To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
> herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Victoria Milhoan <vicki.milhoan@freescale.com>; Dan Douglass
> <dan.douglass@nxp.com>; Vipul Kumar <vipul_kumar@mentor.com>;
> kernel@pengutronix.de
> Subject: Re: [PATCH] crypto: caam - adjust RNG timing to support more devices
>
> On 7/17/23 14:43, Bastian Krause wrote:
> > On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
> >> From: Victoria Milhoan <vicki.milhoan@freescale.com>
> >>
> >> Adjust RNG timing parameters to support more i.MX6 devices.
> >>
> >> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
> >> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
> >> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
> >> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> >> ---
> >>   drivers/crypto/caam/ctrl.c | 4 ++--
> >>   1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my end:
> >
> > caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto:
> > Entropy delay = 3600 [...] caam 30900000.crypto: Entropy delay = 12400
> > caam 30900000.crypto: failed to instantiate RNG
> > caam: probe of 30900000.crypto failed with error -11
> >
> > If I revert this patch or increase RTSDCTL_ENT_DLY_MAX to a value >
> > 66800, it works again:
> >
> > caam 30900000.crypto: Entropy delay = 32800 caam 30900000.crypto:
> > Entropy delay = 33200 [...] caam 30900000.crypto: Entropy delay =
> > 66800 caam 30900000.crypto: Instantiated RNG4 SH0 caam
> > 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device ID
> > = 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2, qi =
> > 0 caam algorithms registered in /proc/crypto caam 30900000.crypto:
> > caam pkc algorithms registered in /proc/crypto caam 30900000.crypto:
> > registering rng-caam Executing RNG SELF-TEST with wait
> > random: crng init done
> > caam 30900000.crypto: rng crypto API alg registered prng-caam
>
> This ^ was the kernel log for..
>
>
> --- a/drivers/crypto/caam/regs.h
> +++ b/drivers/crypto/caam/regs.h
> @@@ -522,7 -522,7 +522,7 @@@ struct rng4tst
>    #define RTSDCTL_ENT_DLY_SHIFT 16
>    #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
>    #define RTSDCTL_ENT_DLY_MIN 3200
> --#define RTSDCTL_ENT_DLY_MAX 12800
> ++#define RTSDCTL_ENT_DLY_MAX 70000
>    #define RTSDCTL_SAMP_SIZE_MASK 0xffff
>    #define RTSDCTL_SAMP_SIZE_VAL 512
>          u32 rtsdctl;            /* seed control register */
>
>
> For completion's sake: Reverting this patch..
>
>
> --- a/drivers/crypto/caam/ctrl.c
> +++ b/drivers/crypto/caam/ctrl.c
> @@ -383,7 +383,7 @@ static void kick_trng(struct device *dev, int ent_delay)
>                  /* min. freq. count, equal to 1/4 of the entropy sample length */
>                  wr_reg32(&r4tst->rtfrqmin, val >> 2);
>                  /* max. freq. count, equal to 16 times the entropy sample length */
> -               wr_reg32(&r4tst->rtfrqmax, val << 4);
> +               wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
>          }
>
>          wr_reg32(&r4tst->rtsdctl, (val << RTSDCTL_ENT_DLY_SHIFT) |
>
>
> ..produces this kernel log (without RNG SELF-TEST):
>
> caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto: Entropy
> delay = 3600 caam 30900000.crypto: Instantiated RNG4 SH0 caam
> 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device ID =
> 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2, qi = 0 caam
> algorithms registered in /proc/crypto caam 30900000.crypto: caam pkc
> algorithms registered in /proc/crypto caam 30900000.crypto: registering rng-
> caam caam 30900000.crypto: rng crypto API alg registered prng-caam
> random: crng init done
>
> Regards,
> Bastian
>
> >>
> >> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
> >> index 5fed3cf354c0..62dd069942e4 100644
> >> --- a/drivers/crypto/caam/ctrl.c
> >> +++ b/drivers/crypto/caam/ctrl.c
> >> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int
> >> ent_delay)
> >>       wr_reg32(&r4tst->rtsdctl, val);
> >>       /* min. freq. count, equal to 1/4 of the entropy sample length
> >> */
> >>       wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
> >> -    /* disable maximum frequency count */
> >> -    wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
> >> +    /* max. freq. count, equal to 16 times the entropy sample length
> >> +*/
> >> +    wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
> >>       /* read the control register */
> >>       val = rd_reg32(&r4tst->rtmctl);
> >>   start_rng:
> >
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       |
> http://www.pen/
> gutronix.de%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C1f556
> d6802434c00ef4f08db87736527%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C638252701909887583%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> %7C%7C&sdata=2vCBBdo%2FAkyz%2BaLXcDyeursw3Gle%2FKosiO%2FdPysOd3
> Q%3D&reserved=0  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

RE: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Meenakshi Aggarwal]

Hi Bastian,

Please share the required information.

Thanks,
Meenakshi

> -----Original Message-----
> From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> Sent: Wednesday, July 19, 2023 12:31 PM
> To: Bastian Krause <bst@pengutronix.de>; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
> herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Victoria Milhoan <vicki.milhoan@freescale.com>; Dan Douglass
> <dan.douglass@nxp.com>; Vipul Kumar <vipul_kumar@mentor.com>;
> kernel@pengutronix.de
> Subject: RE: [PATCH] crypto: caam - adjust RNG timing to support more devices
>
> Hi Bastian,
>
> We have tested the patch on i.mx8mm board and we did not face any issue with
> the patch.
>
> Please share your imx8mm board revision and complete logs (including
> bootloader logs), It will help in investigating the issue you are facing.
>
> Thanks,
> Meenakshi
>
> > -----Original Message-----
> > From: Bastian Krause <bst@pengutronix.de>
> > Sent: Tuesday, July 18, 2023 3:13 PM
> > To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Horia Geanta
> > <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> > <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
> > herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> > crypto@vger.kernel.org; linux-kernel@vger.kernel.org
> > Cc: Victoria Milhoan <vicki.milhoan@freescale.com>; Dan Douglass
> > <dan.douglass@nxp.com>; Vipul Kumar <vipul_kumar@mentor.com>;
> > kernel@pengutronix.de
> > Subject: Re: [PATCH] crypto: caam - adjust RNG timing to support more
> > devices
> >
> > On 7/17/23 14:43, Bastian Krause wrote:
> > > On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
> > >> From: Victoria Milhoan <vicki.milhoan@freescale.com>
> > >>
> > >> Adjust RNG timing parameters to support more i.MX6 devices.
> > >>
> > >> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
> > >> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
> > >> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
> > >> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
> > >> ---
> > >>   drivers/crypto/caam/ctrl.c | 4 ++--
> > >>   1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my
> end:
> > >
> > > caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto:
> > > Entropy delay = 3600 [...] caam 30900000.crypto: Entropy delay =
> > > 12400 caam 30900000.crypto: failed to instantiate RNG
> > > caam: probe of 30900000.crypto failed with error -11
> > >
> > > If I revert this patch or increase RTSDCTL_ENT_DLY_MAX to a value >
> > > 66800, it works again:
> > >
> > > caam 30900000.crypto: Entropy delay = 32800 caam 30900000.crypto:
> > > Entropy delay = 33200 [...] caam 30900000.crypto: Entropy delay =
> > > 66800 caam 30900000.crypto: Instantiated RNG4 SH0 caam
> > > 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device
> > > ID = 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2,
> > > qi =
> > > 0 caam algorithms registered in /proc/crypto caam 30900000.crypto:
> > > caam pkc algorithms registered in /proc/crypto caam 30900000.crypto:
> > > registering rng-caam Executing RNG SELF-TEST with wait
> > > random: crng init done
> > > caam 30900000.crypto: rng crypto API alg registered prng-caam
> >
> > This ^ was the kernel log for..
> >
> >
> > --- a/drivers/crypto/caam/regs.h
> > +++ b/drivers/crypto/caam/regs.h
> > @@@ -522,7 -522,7 +522,7 @@@ struct rng4tst
> >    #define RTSDCTL_ENT_DLY_SHIFT 16
> >    #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
> >    #define RTSDCTL_ENT_DLY_MIN 3200
> > --#define RTSDCTL_ENT_DLY_MAX 12800
> > ++#define RTSDCTL_ENT_DLY_MAX 70000
> >    #define RTSDCTL_SAMP_SIZE_MASK 0xffff
> >    #define RTSDCTL_SAMP_SIZE_VAL 512
> >          u32 rtsdctl;            /* seed control register */
> >
> >
> > For completion's sake: Reverting this patch..
> >
> >
> > --- a/drivers/crypto/caam/ctrl.c
> > +++ b/drivers/crypto/caam/ctrl.c
> > @@ -383,7 +383,7 @@ static void kick_trng(struct device *dev, int ent_delay)
> >                  /* min. freq. count, equal to 1/4 of the entropy sample length */
> >                  wr_reg32(&r4tst->rtfrqmin, val >> 2);
> >                  /* max. freq. count, equal to 16 times the entropy sample length */
> > -               wr_reg32(&r4tst->rtfrqmax, val << 4);
> > +               wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
> >          }
> >
> >          wr_reg32(&r4tst->rtsdctl, (val << RTSDCTL_ENT_DLY_SHIFT) |
> >
> >
> > ..produces this kernel log (without RNG SELF-TEST):
> >
> > caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto:
> > Entropy delay = 3600 caam 30900000.crypto: Instantiated RNG4 SH0 caam
> > 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device ID
> > =
> > 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2, qi = 0
> > caam algorithms registered in /proc/crypto caam 30900000.crypto: caam
> > pkc algorithms registered in /proc/crypto caam 30900000.crypto:
> > registering rng- caam caam 30900000.crypto: rng crypto API alg
> > registered prng-caam
> > random: crng init done
> >
> > Regards,
> > Bastian
> >
> > >>
> > >> diff --git a/drivers/crypto/caam/ctrl.c
> > >> b/drivers/crypto/caam/ctrl.c index 5fed3cf354c0..62dd069942e4
> > >> 100644
> > >> --- a/drivers/crypto/caam/ctrl.c
> > >> +++ b/drivers/crypto/caam/ctrl.c
> > >> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int
> > >> ent_delay)
> > >>       wr_reg32(&r4tst->rtsdctl, val);
> > >>       /* min. freq. count, equal to 1/4 of the entropy sample
> > >> length */
> > >>       wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
> > >> -    /* disable maximum frequency count */
> > >> -    wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
> > >> +    /* max. freq. count, equal to 16 times the entropy sample
> > >> +length */
> > >> +    wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
> > >>       /* read the control register */
> > >>       val = rd_reg32(&r4tst->rtmctl);
> > >>   start_rng:
> > >
> >
> > --
> > Pengutronix e.K.                           |                             |
> > Steuerwalder Str. 21                       |
> > http://www.p/
> >
> en%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C3e036baed8c9
> 4cf104
> >
> 4008db8825e5ce%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6382
> 534685
> >
> 76971721%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2l
> uMzIiL
> >
> CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vbtE1IciakfHjf
> JQiB
> > VxOGN%2Bm7JBlT%2B1obDRf0eyOuM%3D&reserved=0
> >
> gutronix.de%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C1f556
> >
> d6802434c00ef4f08db87736527%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> >
> 0%7C0%7C638252701909887583%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
> >
> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> > %7C%7C&sdata=2vCBBdo%2FAkyz%2BaLXcDyeursw3Gle%2FKosiO%2FdPysOd
> 3
> > Q%3D&reserved=0  |
> > 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Bastian Krause]

Hi Meenakshi,

On 7/19/23 09:00, Meenakshi Aggarwal wrote:
> We have tested the patch on i.mx8mm board and we did not face any issue with the patch.
> 
> Please share your imx8mm board revision and complete logs (including bootloader logs),
> It will help in investigating the issue you are facing.

SoC: i.MX8MM revision 1.0
MSC OSM-MF-IMX8MINI [1] on MSC OSM-SM2F-AD-001 on a customer baseboard.

[1] https://embedded.avnet.com/product/msc-osm-mf-imx8mini/

These are the logs booting v6.5-rc3 via barebox 2023.07.1:


NOTICE:  BL31: v2.8(release):v2.8-dirty
NOTICE:  BL31: Built : 18:12:00, Nov 21 2022

barebox 2023.07.1-20230712-1 #1 Tue Jul 18 14:38:43 UTC 2023
Buildsystem version: 00ded5f

Board: MSC OSM-MF-IMX8MINI on MSC OSM-SM2F-AD-001 on customer baseboard
deep-probe: supported due to customer-imx8mm
detected i.MX8MM revision 1.0
i.MX8MM unique ID: 272b41aac2a4060c
rn5t568-i2c rn5t5680: Found NMD RN5T568 LSI 1, OTP: 6f
imx-esdhc 30b50000.mmc@30b50000.of: registered as mmc1
imx-esdhc 30b60000.mmc@30b60000.of: registered as mmc2
mdio_bus: miibus0: probed
malloc space: 0xbfdfd1c0 -> 0xffdfd1bf (size 1 GiB)
eth0: Got preset MAC address from device tree: 00:11:22:33:44:55

Hit m for menu or any to stop autoboot:    0
mmc1: detected SD card version 2.0
mmc1: registered mmc1
ext4 ext40: EXT2 rev 1, inode_size 256, descriptor size 64
ext4 ext40: EXT2 rev 1, inode_size 256, descriptor size 64
Booting entry 'Customer Image (/mnt/mmc1.0/loader/entries/imx8mm-customer.conf)'
blspec: booting Customer Image from mmc1
Adding "root=PARTUUID=076c4a2a-01" to Kernel commandline

Loading ARM aarch64 Linux image '/mnt/mmc1.0//boot/Image'
Loading devicetree from '/mnt/mmc1.0//boot/devicetree/imx8mm-customer.dtb'
commandline: root=PARTUUID=076c4a2a-01 console=ttymxc1,115200n8  6 rootwait
Loaded kernel to 0x40000000, devicetree at 0x0000000041590000
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.5.0-rc3 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.40.0.20230620) #1 SMP PREEMPT Sun Jul 23 22:24:10 UTC 2023
[    0.000000] Machine model: MSC OSM-MF-IMX8MINI on MSC OSM-SM2F-AD-001 on Customer baseboard
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[    0.000000] cma: Reserved 16 MiB at 0x00000000ff000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 29 pages/cpu s77992 r8192 d32600 u118784
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: root=PARTUUID=076c4a2a-01 console=ttymxc1,115200n8  6 rootwait
[    0.000000] Unknown kernel command line parameters "6", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032192
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fb000000-0x00000000ff000000] (64MB)
[    0.000000] Memory: 4008812K/4194304K available (11200K kernel code, 1910K rwdata, 4088K rodata, 4352K init, 326K bss, 169108K reserved, 16384K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 38151 entries in 150 pages
[    0.000000] ftrace: allocated 150 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[    0.000001] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[    0.000533] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000)
[    0.000543] pid_max: default: 32768 minimum: 301
[    0.003503] LSM: initializing lsm=capability
[    0.004347] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.004370] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.008065] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.008139] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.008225] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.008395] rcu: Hierarchical SRCU implementation.
[    0.008399] rcu: 	Max phase no-delay instances is 1000.
[    0.009412] smp: Bringing up secondary CPUs ...
[    0.009912] Detected VIPT I-cache on CPU1
[    0.009981] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000
[    0.010023] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.010589] Detected VIPT I-cache on CPU2
[    0.010637] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000
[    0.010664] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.011147] Detected VIPT I-cache on CPU3
[    0.011190] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000
[    0.011211] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.011268] smp: Brought up 1 node, 4 CPUs
[    0.011274] SMP: Total of 4 processors activated.
[    0.011279] CPU features: detected: 32-bit EL0 Support
[    0.011282] CPU features: detected: CRC32 instructions
[    0.011330] CPU: All CPU(s) started at EL2
[    0.011332] alternatives: applying system-wide alternatives
[    0.013395] devtmpfs: initialized
[    0.020093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.020119] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.021492] pinctrl core: initialized pinctrl subsystem
[    0.024561] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.025369] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.025472] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.025630] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.026034] thermal_sys: Registered thermal governor 'step_wise'
[    0.026064] cpuidle: using governor menu
[    0.026169] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.026241] ASID allocator initialised with 65536 entries
[    0.030673] platform soc@0: Fixed dependency cycle(s) with /soc@0/bus@30000000/efuse@30350000/unique-id@4
[    0.032280] platform 30330000.pinctrl: Fixed dependency cycle(s) with /soc@0/bus@30000000/pinctrl@30330000/hoggrp
[    0.032900] imx8mm-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver
[    0.033610] platform 30350000.efuse: Fixed dependency cycle(s) with /soc@0/bus@30000000/clock-controller@30380000
[    0.043065] Modules: 27248 pages in range for non-PLT usage
[    0.043077] Modules: 518768 pages in range for PLT usage
[    0.043889] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.043897] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.043902] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.043906] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.043910] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.043915] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.043919] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.043922] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.044367] cryptd: max_cpu_qlen set to 1000
[    0.047344] iommu: Default domain type: Translated
[    0.047351] iommu: DMA domain TLB invalidation policy: strict mode
[    0.047695] SCSI subsystem initialized
[    0.047855] usbcore: registered new interface driver usbfs
[    0.047882] usbcore: registered new interface driver hub
[    0.047911] usbcore: registered new device driver usb
[    0.048582] pps_core: LinuxPPS API ver. 1 registered
[    0.048586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.048600] PTP clock support registered
[    0.049014] FPGA manager framework
[    0.049909] clocksource: Switched to clocksource arch_sys_counter
[    0.059522] NET: Registered PF_INET protocol family
[    0.059758] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.063403] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.063496] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.063512] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.063726] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.064752] TCP: Hash tables configured (established 32768 bind 32768)
[    0.064930] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.065021] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.065471] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.066080] RPC: Registered named UNIX socket transport module.
[    0.066086] RPC: Registered udp transport module.
[    0.066089] RPC: Registered tcp transport module.
[    0.066091] RPC: Registered tcp-with-tls transport module.
[    0.066094] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.066108] PCI: CLS 0 bytes, default 64
[    0.067346] Initialise system trusted keyrings
[    0.067490] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.073825] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.074391] NFS: Registering the id_resolver key type
[    0.074417] Key type id_resolver registered
[    0.074421] Key type id_legacy registered
[    0.074514] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.074524] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.106201] NET: Registered PF_ALG protocol family
[    0.106212] Key type asymmetric registered
[    0.106217] Asymmetric key parser 'x509' registered
[    0.106222] Asymmetric key parser 'pkcs8' registered
[    0.106274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.106280] io scheduler mq-deadline registered
[    0.106284] io scheduler kyber registered
[    0.114502] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.114524] imx-sdma 302c0000.dma-controller: external firmware not found, using ROM firmware
[    0.116312] imx-sdma 302b0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.116323] imx-sdma 302b0000.dma-controller: external firmware not found, using ROM firmware
[    0.118302] imx-sdma 30bd0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.118313] imx-sdma 30bd0000.dma-controller: external firmware not found, using ROM firmware
[    0.122348] SoC: i.MX8MM revision 1.0
[    0.125491] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 18, base_baud = 1500000) is a IMX
[    0.126259] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 19, base_baud = 1500000) is a IMX
[    0.126300] printk: console [ttymxc1] enabled
[    1.102185] loop: module loaded
[    1.107963] usbcore: registered new interface driver usb-storage
[    1.115875] input: 30370000.snvs:snvs-powerkey as /devices/platform/soc@0/30000000.bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
[    1.129313] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1
[    1.135624] i2c_dev: i2c /dev entries driver
[    1.141791] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.151331] sdhci: Secure Digital Host Controller Interface driver
[    1.157540] sdhci: Copyright(c) Pierre Ossman
[    1.161905] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.169109] caam 30900000.crypto: Entropy delay = 3200
[    1.174385] caam 30900000.crypto: Entropy delay = 3600
[    1.179620] caam 30900000.crypto: Entropy delay = 4000
[    1.184849] caam 30900000.crypto: Entropy delay = 4400
[    1.190084] caam 30900000.crypto: Entropy delay = 4800
[    1.195317] caam 30900000.crypto: Entropy delay = 5200
[    1.200559] caam 30900000.crypto: Entropy delay = 5600
[    1.201193] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA
[    1.205800] caam 30900000.crypto: Entropy delay = 6000
[    1.218018] caam 30900000.crypto: Entropy delay = 6400
[    1.223280] caam 30900000.crypto: Entropy delay = 6800
[    1.228530] caam 30900000.crypto: Entropy delay = 7200
[    1.233788] caam 30900000.crypto: Entropy delay = 7600
[    1.239043] caam 30900000.crypto: Entropy delay = 8000
[    1.244300] caam 30900000.crypto: Entropy delay = 8400
[    1.249562] caam 30900000.crypto: Entropy delay = 8800
[    1.254839] caam 30900000.crypto: Entropy delay = 9200
[    1.260113] caam 30900000.crypto: Entropy delay = 9600
[    1.265389] caam 30900000.crypto: Entropy delay = 10000
[    1.270749] caam 30900000.crypto: Entropy delay = 10400
[    1.276117] caam 30900000.crypto: Entropy delay = 10800
[    1.281498] caam 30900000.crypto: Entropy delay = 11200
[    1.286875] caam 30900000.crypto: Entropy delay = 11600
[    1.292254] caam 30900000.crypto: Entropy delay = 12000
[    1.297636] caam 30900000.crypto: Entropy delay = 12400
[    1.303022] caam 30900000.crypto: failed to instantiate RNG
[    1.308603] caam: probe of 30900000.crypto failed with error -11
[    1.315519] usbcore: registered new interface driver usbhid
[    1.321132] usbhid: USB HID core driver
[    1.326846] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.336090] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[    1.338504] NET: Registered PF_INET6 protocol family
[    1.343376] mmcblk2: mmc2:0001 IB2916 14.6 GiB
[    1.348881] Segment Routing with IPv6
[    1.353939]  mmcblk2: p1
[    1.355629] In-situ OAM (IOAM) with IPv6
[    1.358931] mmcblk2boot0: mmc2:0001 IB2916 4.00 MiB
[    1.362135] NET: Registered PF_PACKET protocol family
[    1.368312] mmcblk2boot1: mmc2:0001 IB2916 4.00 MiB
[    1.372035] 8021q: 802.1Q VLAN Support v1.8
[    1.378226] mmcblk2rpmb: mmc2:0001 IB2916 4.00 MiB, chardev (245:0)
[    1.381146] Key type dns_resolver registered
[    1.397532] registered taskstats version 1
[    1.402197] Loading compiled-in X.509 certificates
[    1.429427] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.439918] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.450145] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.460417] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.470760] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
[    1.481645] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
[    1.490090] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
[    1.499490] i2c i2c-0: IMX I2C adapter registered
[    1.504938] i2c i2c-1: IMX I2C adapter registered
[    1.510651] at24 2-0050: supply vcc not found, using dummy regulator
[    1.545479] i2c i2c-2: IMX I2C adapter registered
[    1.551234] i2c i2c-3: IMX I2C adapter registered
[    1.560291] pps pps0: new PPS source ptp0
[    1.568244] fec 30be0000.ethernet eth0: registered PHC device 0
[    1.575795] sdhci-esdhc-imx 30b50000.mmc: Got WP GPIO
[    1.576803] clk: Disabling unused clocks
[    1.612537] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[    1.643039] EXT4-fs (mmcblk2p1): orphan cleanup on readonly fs
[    1.649085] EXT4-fs (mmcblk2p1): mounted filesystem c6b21368-2d43-4e41-b554-1b5ee3851e5c ro with ordered data mode. Quota mode: disabled.
[    1.656832] mmc1: new high speed SDHC card at address 0001
[    1.661547] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    1.667859] mmcblk1: mmc1:0001 ASTC 29.1 GiB (ro)
[    1.674414] devtmpfs: mounted
[    1.681206]  mmcblk1: p1
[    1.684863] Freeing unused kernel memory: 4352K
[    1.689502] Run /sbin/init as init process
[    1.817750] systemd[1]: System time before build time, advancing clock.
[    1.850220] systemd[1]: systemd 253.1^ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL -ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[    1.882000] systemd[1]: Detected architecture arm64.


Regards,
Bastian

> 
>> -----Original Message-----
>> From: Bastian Krause <bst@pengutronix.de>
>> Sent: Tuesday, July 18, 2023 3:13 PM
>> To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>; Horia Geanta
>> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
>> <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>;
>> herbert@gondor.apana.org.au; davem@davemloft.net; linux-
>> crypto@vger.kernel.org; linux-kernel@vger.kernel.org
>> Cc: Victoria Milhoan <vicki.milhoan@freescale.com>; Dan Douglass
>> <dan.douglass@nxp.com>; Vipul Kumar <vipul_kumar@mentor.com>;
>> kernel@pengutronix.de
>> Subject: Re: [PATCH] crypto: caam - adjust RNG timing to support more devices
>>
>> On 7/17/23 14:43, Bastian Krause wrote:
>>> On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
>>>> From: Victoria Milhoan <vicki.milhoan@freescale.com>
>>>>
>>>> Adjust RNG timing parameters to support more i.MX6 devices.
>>>>
>>>> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
>>>> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
>>>> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
>>>> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
>>>> ---
>>>>    drivers/crypto/caam/ctrl.c | 4 ++--
>>>>    1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my end:
>>>
>>> caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto:
>>> Entropy delay = 3600 [...] caam 30900000.crypto: Entropy delay = 12400
>>> caam 30900000.crypto: failed to instantiate RNG
>>> caam: probe of 30900000.crypto failed with error -11
>>>
>>> If I revert this patch or increase RTSDCTL_ENT_DLY_MAX to a value >
>>> 66800, it works again:
>>>
>>> caam 30900000.crypto: Entropy delay = 32800 caam 30900000.crypto:
>>> Entropy delay = 33200 [...] caam 30900000.crypto: Entropy delay =
>>> 66800 caam 30900000.crypto: Instantiated RNG4 SH0 caam
>>> 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device ID
>>> = 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2, qi =
>>> 0 caam algorithms registered in /proc/crypto caam 30900000.crypto:
>>> caam pkc algorithms registered in /proc/crypto caam 30900000.crypto:
>>> registering rng-caam Executing RNG SELF-TEST with wait
>>> random: crng init done
>>> caam 30900000.crypto: rng crypto API alg registered prng-caam
>>
>> This ^ was the kernel log for..
>>
>>
>> --- a/drivers/crypto/caam/regs.h
>> +++ b/drivers/crypto/caam/regs.h
>> @@@ -522,7 -522,7 +522,7 @@@ struct rng4tst
>>     #define RTSDCTL_ENT_DLY_SHIFT 16
>>     #define RTSDCTL_ENT_DLY_MASK (0xffff << RTSDCTL_ENT_DLY_SHIFT)
>>     #define RTSDCTL_ENT_DLY_MIN 3200
>> --#define RTSDCTL_ENT_DLY_MAX 12800
>> ++#define RTSDCTL_ENT_DLY_MAX 70000
>>     #define RTSDCTL_SAMP_SIZE_MASK 0xffff
>>     #define RTSDCTL_SAMP_SIZE_VAL 512
>>           u32 rtsdctl;            /* seed control register */
>>
>>
>> For completion's sake: Reverting this patch..
>>
>>
>> --- a/drivers/crypto/caam/ctrl.c
>> +++ b/drivers/crypto/caam/ctrl.c
>> @@ -383,7 +383,7 @@ static void kick_trng(struct device *dev, int ent_delay)
>>                   /* min. freq. count, equal to 1/4 of the entropy sample length */
>>                   wr_reg32(&r4tst->rtfrqmin, val >> 2);
>>                   /* max. freq. count, equal to 16 times the entropy sample length */
>> -               wr_reg32(&r4tst->rtfrqmax, val << 4);
>> +               wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
>>           }
>>
>>           wr_reg32(&r4tst->rtsdctl, (val << RTSDCTL_ENT_DLY_SHIFT) |
>>
>>
>> ..produces this kernel log (without RNG SELF-TEST):
>>
>> caam 30900000.crypto: Entropy delay = 3200 caam 30900000.crypto: Entropy
>> delay = 3600 caam 30900000.crypto: Instantiated RNG4 SH0 caam
>> 30900000.crypto: Instantiated RNG4 SH1 caam 30900000.crypto: device ID =
>> 0x0a16040100000000 (Era 9) caam 30900000.crypto: job rings = 2, qi = 0 caam
>> algorithms registered in /proc/crypto caam 30900000.crypto: caam pkc
>> algorithms registered in /proc/crypto caam 30900000.crypto: registering rng-
>> caam caam 30900000.crypto: rng crypto API alg registered prng-caam
>> random: crng init done
>>
>> Regards,
>> Bastian
>>
>>>>
>>>> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
>>>> index 5fed3cf354c0..62dd069942e4 100644
>>>> --- a/drivers/crypto/caam/ctrl.c
>>>> +++ b/drivers/crypto/caam/ctrl.c
>>>> @@ -383,8 +383,8 @@ static void kick_trng(struct device *dev, int
>>>> ent_delay)
>>>>        wr_reg32(&r4tst->rtsdctl, val);
>>>>        /* min. freq. count, equal to 1/4 of the entropy sample length
>>>> */
>>>>        wr_reg32(&r4tst->rtfrqmin, ent_delay >> 2);
>>>> -    /* disable maximum frequency count */
>>>> -    wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE);
>>>> +    /* max. freq. count, equal to 16 times the entropy sample length
>>>> +*/
>>>> +    wr_reg32(&r4tst->rtfrqmax, ent_delay << 4);
>>>>        /* read the control register */
>>>>        val = rd_reg32(&r4tst->rtmctl);
>>>>    start_rng:
>>>
>>
>> --
>> Pengutronix e.K.                           |                             |
>> Steuerwalder Str. 21                       |
>> http://www.pen/
>> gutronix.de%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C1f556
>> d6802434c00ef4f08db87736527%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
>> 0%7C0%7C638252701909887583%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
>> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
>> %7C%7C&sdata=2vCBBdo%2FAkyz%2BaLXcDyeursw3Gle%2FKosiO%2FdPysOd3
>> Q%3D&reserved=0  |
>> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
>> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Herbert Xu]

On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
> Hi Bastian,
> 
> Please share the required information.

Any progress on this?

Should we revert the offending patch?

Thanks,
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Gaurav Jain]

> -----Original Message-----
> From: Herbert Xu <herbert@gondor.apana.org.au>
> Sent: Friday, August 4, 2023 2:44 PM
> To: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
> <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>; Gaurav Jain <gaurav.jain@nxp.com>
> Subject: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more
> devices
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report this
> email' button
>
>
> On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
> > Hi Bastian,
> >
> > Please share the required information.
>
> Any progress on this?
>
> Should we revert the offending patch?

Debugging is in progress. There should be some mismatch in TRNG configuration in customer board.
Will be sharing a patch to dump the same.

Regards
Gaurav Jain

>
> Thanks,
> --
> Email: Herbert Xu <herbert@gondor.apana.org.au> Home Page:
> http://gondor.ap/
> ana.org.au%2F~herbert%2F&data=05%7C01%7Cgaurav.jain%40nxp.com%7C3d
> b657e628254a7a992a08db94cb2ba6%7C686ea1d3bc2b4c6fa92cd99c5c301635
> %7C0%7C0%7C638267372562927851%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000
> %7C%7C%7C&sdata=kypjQ4eyWAw1NNMvnZ7bbF7cMdFUmU6PFWFSaOanw6
> w%3D&reserved=0
> PGP Key:
> http://gondor.ap/
> ana.org.au%2F~herbert%2Fpubkey.txt&data=05%7C01%7Cgaurav.jain%40nxp.c
> om%7C3db657e628254a7a992a08db94cb2ba6%7C686ea1d3bc2b4c6fa92cd99c
> 5c301635%7C0%7C0%7C638267372562927851%7CUnknown%7CTWFpbGZsb3d
> 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D
> %7C3000%7C%7C%7C&sdata=WsPJZj%2BGnC0CJoZS0YPNA6TxsN%2BAIXeuvRh
> nDY%2FPouQ%3D&reserved=0

Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Linux regression tracking #adding (Thorsten Leemhuis)]

[CCing the regression list, as it should be in the loop for regressions:
https://docs.kernel.org/admin-guide/reporting-regressions.html]

[TLDR: I'm adding this report to the list of tracked Linux kernel
regressions; the text you find below is based on a few templates
paragraphs you might have encountered already in similar form.
See link in footer if these mails annoy you.]

On 17.07.23 14:43, Bastian Krause wrote:
> On 6/12/23 10:26, meenakshi.aggarwal@nxp.com wrote:
>> From: Victoria Milhoan <vicki.milhoan@freescale.com>
>>
>> Adjust RNG timing parameters to support more i.MX6 devices.
>>
>> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
>> Signed-off-by: Dan Douglass <dan.douglass@nxp.com>
>> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
>> Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
>> ---
>>   drivers/crypto/caam/ctrl.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> This patch seems to breaks CAAM RNG instantiation on an i.MX8MM at my end:
> [...]

Thanks for the report. I see that people are working on it already. But
to be sure the issue doesn't fall through the cracks unnoticed, I'm
adding it to regzbot, the Linux kernel regression tracking bot:

#regzbot ^introduced ef492d08030
#regzbot title crypto: broke CAAM RNG instantiation on an i.MX8MM
#regzbot ignore-activity

This isn't a regression? This issue or a fix for it are already
discussed somewhere else? It was fixed already? You want to clarify when
the regression started to happen? Or point out I got the title or
something else totally wrong? Then just reply and tell me -- ideally
while also telling regzbot about it, as explained by the page listed in
the footer of this mail.

Developers: When fixing the issue, remember to add 'Link:' tags pointing
to the report (the parent of this mail). See page linked in footer for
details.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
That page also explains what to do if mails like this annoy you.

Re: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Linux regression tracking (Thorsten Leemhuis)]

[CCing the regression list, as it should be in the loop for regressions:
https://docs.kernel.org/admin-guide/reporting-regressions.html]

On 04.08.23 14:02, Gaurav Jain wrote:
> From: Herbert Xu <herbert@gondor.apana.org.au>
>> On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
>>> Please share the required information.
>> Any progress on this?
>>
>> Should we revert the offending patch?
> 
> Debugging is in progress. There should be some mismatch in TRNG configuration in customer board.
> Will be sharing a patch to dump the same.

Any progress on this? Afaics would be good to have either the fix or the
revert in by -rc7 to ensure things get at least one week of proper
testing before the final release.

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.

#regzbot poke

RE: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Meenakshi Aggarwal]

Hi,

we have tested this patch on multiple variants of imx board and it is working fine.

We are actively debugging the issue, it is taking time as we are not able to reproduce it at our end.

Thanks,
Meenakshi

> -----Original Message-----
> From: Linux regression tracking (Thorsten Leemhuis)
> <regressions@leemhuis.info>
> Sent: Friday, August 11, 2023 2:18 PM
> To: Gaurav Jain <gaurav.jain@nxp.com>; Herbert Xu
> <herbert@gondor.apana.org.au>; Meenakshi Aggarwal
> <meenakshi.aggarwal@nxp.com>
> Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
> <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>; Linux kernel regressions list
> <regressions@lists.linux.dev>
> Subject: Re: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support
> more devices
>
> [CCing the regression list, as it should be in the loop for regressions:
> https://docs.ker/
> nel.org%2Fadmin-guide%2Freporting-
> regressions.html&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7Cfde9
> ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> C0%7C0%7C638273404742560069%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
> 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> %7C%7C&sdata=lt7nphOXYXc3GRfOquvM5jmqNszQkDd%2BuSRdAbJd8Ec%3D&r
> eserved=0]
>
> On 04.08.23 14:02, Gaurav Jain wrote:
> > From: Herbert Xu <herbert@gondor.apana.org.au>
> >> On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
> >>> Please share the required information.
> >> Any progress on this?
> >>
> >> Should we revert the offending patch?
> >
> > Debugging is in progress. There should be some mismatch in TRNG
> configuration in customer board.
> > Will be sharing a patch to dump the same.
>
> Any progress on this? Afaics would be good to have either the fix or the revert in
> by -rc7 to ensure things get at least one week of proper testing before the final
> release.
>
> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> --
> Everything you wanna know about Linux kernel regression tracking:
> https://linux-/
> regtracking.leemhuis.info%2Fabout%2F%23tldr&data=05%7C01%7Cmeenakshi.
> aggarwal%40nxp.com%7Cfde9ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3b
> c2b4c6fa92cd99c5c301635%7C0%7C0%7C638273404742560069%7CUnknown
> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwi
> LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Xg3ZCWObptmF6xLKO7dpaIYB
> A17eKK5wNhlPZ6FR2XA%3D&reserved=0
> If I did something stupid, please tell me, as explained on that page.
>
> #regzbot poke

RE: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Meenakshi Aggarwal]

Hi,

We discussed about it and lets revert the patch for now, as the tag is to be applied this weekend.

Thanks,
Meenakshi

> -----Original Message-----
> From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> Sent: Friday, August 11, 2023 5:25 PM
> To: Linux regressions mailing list <regressions@lists.linux.dev>; Gaurav Jain
> <gaurav.jain@nxp.com>; Herbert Xu <herbert@gondor.apana.org.au>
> Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
> <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> <pankaj.gupta@nxp.com>
> Subject: RE: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support
> more devices
> 
> Hi,
> 
> we have tested this patch on multiple variants of imx board and it is working fine.
> 
> We are actively debugging the issue, it is taking time as we are not able to
> reproduce it at our end.
> 
> Thanks,
> Meenakshi
> 
> > -----Original Message-----
> > From: Linux regression tracking (Thorsten Leemhuis)
> > <regressions@leemhuis.info>
> > Sent: Friday, August 11, 2023 2:18 PM
> > To: Gaurav Jain <gaurav.jain@nxp.com>; Herbert Xu
> > <herbert@gondor.apana.org.au>; Meenakshi Aggarwal
> > <meenakshi.aggarwal@nxp.com>
> > Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
> > crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
> > <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
> > <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
> > <pankaj.gupta@nxp.com>; Linux kernel regressions list
> > <regressions@lists.linux.dev>
> > Subject: Re: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to
> > support more devices
> >
> > [CCing the regression list, as it should be in the loop for regressions:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs
> > .ker%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C84b2ed6da
> ac44625
> >
> 779408db9a61d801%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63
> 827351
> >
> 7248142302%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi
> V2luMzI
> >
> iLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=OWH18Cwu
> h8zyAFqn
> > I6iiL3Kewpj5NiWaQorKcmiYrr0%3D&reserved=0
> > nel.org%2Fadmin-guide%2Freporting-
> >
> regressions.html&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7Cfde9
> >
> ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
> >
> C0%7C0%7C638273404742560069%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
> >
> 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> > %7C%7C&sdata=lt7nphOXYXc3GRfOquvM5jmqNszQkDd%2BuSRdAbJd8Ec%3D
> &r
> > eserved=0]
> >
> > On 04.08.23 14:02, Gaurav Jain wrote:
> > > From: Herbert Xu <herbert@gondor.apana.org.au>
> > >> On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
> > >>> Please share the required information.
> > >> Any progress on this?
> > >>
> > >> Should we revert the offending patch?
> > >
> > > Debugging is in progress. There should be some mismatch in TRNG
> > configuration in customer board.
> > > Will be sharing a patch to dump the same.
> >
> > Any progress on this? Afaics would be good to have either the fix or
> > the revert in by -rc7 to ensure things get at least one week of proper
> > testing before the final release.
> >
> > Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker'
> > hat)
> > --
> > Everything you wanna know about Linux kernel regression tracking:
> > https://linux-/
> >
> regtracking.leemhuis.info%2Fabout%2F%23tldr&data=05%7C01%7Cmeenakshi.
> >
> aggarwal%40nxp.com%7Cfde9ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3b
> >
> c2b4c6fa92cd99c5c301635%7C0%7C0%7C638273404742560069%7CUnknown
> > %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
> wi
> >
> LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Xg3ZCWObptmF6xLKO7dpaIYB
> > A17eKK5wNhlPZ6FR2XA%3D&reserved=0
> > If I did something stupid, please tell me, as explained on that page.
> >
> > #regzbot poke

Re: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support more devices

[Linux regression tracking (Thorsten Leemhuis)]

On 11.08.23 14:58, Meenakshi Aggarwal wrote:
> 
> We discussed about it and lets revert the patch for now,

Okay. So who will submit the revert?

> as the tag is to be applied this weekend.

/me can't follow, but whatever, likely not that imporant

Ciao, Thorsten

>> -----Original Message-----
>> From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
>> Sent: Friday, August 11, 2023 5:25 PM
>> To: Linux regressions mailing list <regressions@lists.linux.dev>; Gaurav Jain
>> <gaurav.jain@nxp.com>; Herbert Xu <herbert@gondor.apana.org.au>
>> Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
>> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
>> <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
>> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
>> <pankaj.gupta@nxp.com>
>> Subject: RE: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to support
>> more devices
>>
>> Hi,
>>
>> we have tested this patch on multiple variants of imx board and it is working fine.
>>
>> We are actively debugging the issue, it is taking time as we are not able to
>> reproduce it at our end.
>>
>> Thanks,
>> Meenakshi
>>
>>> -----Original Message-----
>>> From: Linux regression tracking (Thorsten Leemhuis)
>>> <regressions@leemhuis.info>
>>> Sent: Friday, August 11, 2023 2:18 PM
>>> To: Gaurav Jain <gaurav.jain@nxp.com>; Herbert Xu
>>> <herbert@gondor.apana.org.au>; Meenakshi Aggarwal
>>> <meenakshi.aggarwal@nxp.com>
>>> Cc: Bastian Krause <bst@pengutronix.de>; davem@davemloft.net; linux-
>>> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Dan Douglass
>>> <dan.douglass@nxp.com>; kernel@pengutronix.de; Horia Geanta
>>> <horia.geanta@nxp.com>; Varun Sethi <V.Sethi@nxp.com>; Pankaj Gupta
>>> <pankaj.gupta@nxp.com>; Linux kernel regressions list
>>> <regressions@lists.linux.dev>
>>> Subject: Re: RE: [EXT] Re: [PATCH] crypto: caam - adjust RNG timing to
>>> support more devices
>>>
>>> [CCing the regression list, as it should be in the loop for regressions:
>>> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdocs
>>> .ker%2F&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7C84b2ed6da
>> ac44625
>>>
>> 779408db9a61d801%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63
>> 827351
>>>
>> 7248142302%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoi
>> V2luMzI
>>>
>> iLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=OWH18Cwu
>> h8zyAFqn
>>> I6iiL3Kewpj5NiWaQorKcmiYrr0%3D&reserved=0
>>> nel.org%2Fadmin-guide%2Freporting-
>>>
>> regressions.html&data=05%7C01%7Cmeenakshi.aggarwal%40nxp.com%7Cfde9
>>>
>> ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
>>>
>> C0%7C0%7C638273404742560069%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
>>>
>> 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
>>> %7C%7C&sdata=lt7nphOXYXc3GRfOquvM5jmqNszQkDd%2BuSRdAbJd8Ec%3D
>> &r
>>> eserved=0]
>>>
>>> On 04.08.23 14:02, Gaurav Jain wrote:
>>>> From: Herbert Xu <herbert@gondor.apana.org.au>
>>>>> On Mon, Jul 24, 2023 at 05:13:23AM +0000, Meenakshi Aggarwal wrote:
>>>>>> Please share the required information.
>>>>> Any progress on this?
>>>>>
>>>>> Should we revert the offending patch?
>>>>
>>>> Debugging is in progress. There should be some mismatch in TRNG
>>> configuration in customer board.
>>>> Will be sharing a patch to dump the same.
>>>
>>> Any progress on this? Afaics would be good to have either the fix or
>>> the revert in by -rc7 to ensure things get at least one week of proper
>>> testing before the final release.
>>>
>>> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker'
>>> hat)
>>> --
>>> Everything you wanna know about Linux kernel regression tracking:
>>> https://linux-/
>>>
>> regtracking.leemhuis.info%2Fabout%2F%23tldr&data=05%7C01%7Cmeenakshi.
>>>
>> aggarwal%40nxp.com%7Cfde9ceeb9e0d40d4f77d08db9a47a5e1%7C686ea1d3b
>>>
>> c2b4c6fa92cd99c5c301635%7C0%7C0%7C638273404742560069%7CUnknown
>>> %7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haW
>> wi
>>>
>> LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Xg3ZCWObptmF6xLKO7dpaIYB
>>> A17eKK5wNhlPZ6FR2XA%3D&reserved=0
>>> If I did something stupid, please tell me, as explained on that page.
>>>
>>> #regzbot poke
> 
>