Linux-csky Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] csky: Add setup_initrd check code
@ 2019-10-08  6:25 guoren
  0 siblings, 0 replies; only message in thread
From: guoren @ 2019-10-08  6:25 UTC (permalink / raw)
  To: linux-csky
  Cc: linux-kernel, linux-arch, arnd, akpm, mhocko, rppt, arunks, Guo Ren

From: Guo Ren <ren_guo@c-sky.com>

We should give some necessary check for initrd just like other
architectures and it seems that setup_initrd() could be a common
code for all architectures.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
---
 arch/csky/kernel/setup.c |  3 ---
 arch/csky/mm/init.c      | 44 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+), 3 deletions(-)

diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 23ee604..a00f8a0 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -47,9 +47,6 @@ static void __init csky_memblock_init(void)
 	signed long size;
 
 	memblock_reserve(__pa(_stext), _end - _stext);
-#ifdef CONFIG_BLK_DEV_INITRD
-	memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
-#endif
 
 	early_init_fdt_reserve_self();
 	early_init_fdt_scan_reserved_mem();
diff --git a/arch/csky/mm/init.c b/arch/csky/mm/init.c
index d4c2292..48f791d 100644
--- a/arch/csky/mm/init.c
+++ b/arch/csky/mm/init.c
@@ -35,6 +35,45 @@ unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]
 						__page_aligned_bss;
 EXPORT_SYMBOL(empty_zero_page);
 
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init setup_initrd(void)
+{
+	unsigned long size;
+
+	if (initrd_start >= initrd_end) {
+		pr_err("initrd not found or empty");
+		goto disable;
+	}
+
+	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+		pr_err("initrd extends beyond end of memory");
+		goto disable;
+	}
+
+	size = initrd_end - initrd_start;
+
+	if (memblock_is_region_reserved(__pa(initrd_start), size)) {
+		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region",
+		       __pa(initrd_start), size);
+		goto disable;
+	}
+
+	memblock_reserve(__pa(initrd_start), size);
+
+	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
+		(void *)(initrd_start), size);
+
+	initrd_below_start_ok = 1;
+
+	return;
+
+disable:
+	initrd_start = initrd_end = 0;
+
+	pr_err(" - disabling initrd\n");
+}
+#endif
+
 void __init mem_init(void)
 {
 #ifdef CONFIG_HIGHMEM
@@ -57,6 +96,11 @@ void __init mem_init(void)
 			free_highmem_page(page);
 	}
 #endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	setup_initrd();
+#endif
+
 	mem_init_print_info(NULL);
 }
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-08  6:25 [PATCH] csky: Add setup_initrd check code guoren

Linux-csky Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-csky/0 linux-csky/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-csky linux-csky/ https://lore.kernel.org/linux-csky \
		linux-csky@vger.kernel.org
	public-inbox-index linux-csky

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-csky


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git