From: Baruch Siach <baruch@tkos.co.il>
To: Dave Stevenson <dave.stevenson@raspberrypi.org>,
Eric Anholt <eric@anholt.net>,
Stefan Wahren <stefan.wahren@i2se.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, Baruch Siach <baruch@tkos.co.il>,
linux-gpio@vger.kernel.org, Michael Zoran <mzoran@crowfest.net>,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>
Subject: [PATCH v3 1/4] ARM: bcm2835: sync firmware properties with downstream
Date: Tue, 16 Jan 2018 14:45:07 +0200 [thread overview]
Message-ID: <061d2f80ebcd7e983411ef3b243229eff0b13186.1516105893.git.baruch@tkos.co.il> (raw)
In-Reply-To: <cover.1516105893.git.baruch@tkos.co.il>
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed for the GPIO tags, so we can control the GPIO
multiplexor lines.
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
v3: Add Stefan's ack
v2: No change
---
include/soc/bcm2835/raspberrypi-firmware.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index cb979ad90401..50df5b28d2c9 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -63,6 +63,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_GET_MIN_VOLTAGE = 0x00030008,
RPI_FIRMWARE_GET_TURBO = 0x00030009,
RPI_FIRMWARE_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FIRMWARE_GET_STC = 0x0003000b,
RPI_FIRMWARE_ALLOCATE_MEMORY = 0x0003000c,
RPI_FIRMWARE_LOCK_MEMORY = 0x0003000d,
RPI_FIRMWARE_UNLOCK_MEMORY = 0x0003000e,
@@ -72,12 +73,22 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_SET_ENABLE_QPU = 0x00030012,
RPI_FIRMWARE_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
RPI_FIRMWARE_GET_EDID_BLOCK = 0x00030020,
+ RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021,
RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030,
RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001,
RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002,
RPI_FIRMWARE_SET_VOLTAGE = 0x00038003,
RPI_FIRMWARE_SET_TURBO = 0x00038009,
+ RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021,
RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030,
+ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041,
+ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041,
+ RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042,
+ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043,
+ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043,
+ RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045,
+ RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045,
+
/* Dispmanx TAGS */
RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,
@@ -91,6 +102,8 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
RPI_FIRMWARE_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
RPI_FIRMWARE_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
+ RPI_FIRMWARE_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
RPI_FIRMWARE_FRAMEBUFFER_RELEASE = 0x00048001,
RPI_FIRMWARE_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
@@ -100,6 +113,7 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
RPI_FIRMWARE_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
RPI_FIRMWARE_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FIRMWARE_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
RPI_FIRMWARE_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
RPI_FIRMWARE_FRAMEBUFFER_SET_DEPTH = 0x00048005,
@@ -108,6 +122,10 @@ enum rpi_firmware_property_tag {
RPI_FIRMWARE_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
RPI_FIRMWARE_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
RPI_FIRMWARE_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
+ RPI_FIRMWARE_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
RPI_FIRMWARE_VCHIQ_INIT = 0x00048010,
--
2.15.1
next prev parent reply other threads:[~2018-01-16 12:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-16 12:45 [PATCH v3 0/4] gpio: driver for the RPi3 GPIO expander Baruch Siach
2018-01-16 12:45 ` Baruch Siach [this message]
[not found] ` <cover.1516105893.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
2018-01-16 12:45 ` [PATCH v3 2/4] dt-bindings: gpio: add raspberry pi GPIO expander binding Baruch Siach
2018-01-29 16:11 ` Rob Herring
2018-01-29 16:30 ` Baruch Siach
2018-02-06 13:42 ` [PATCH v3 0/4] gpio: driver for the RPi3 GPIO expander Linus Walleij
[not found] ` <CACRpkdZAtVfAU-k9EUihH6peY2d1Ntn3jboVMBn9adReNLupow-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-06 16:27 ` Baruch Siach
2018-02-07 9:13 ` Linus Walleij
2018-02-07 9:33 ` Stefan Wahren
[not found] ` <a3e4ba9a-60bf-5038-7385-8cb3d2667ed2-eS4NqCHxEME@public.gmane.org>
2018-02-07 9:38 ` Baruch Siach
2018-02-07 10:20 ` Stefan Wahren
2018-01-16 12:45 ` [PATCH v3 3/4] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service Baruch Siach
[not found] ` <1a2829a6cb5edc951f9d8f322882916ab9cea67c.1516105893.git.baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>
2018-01-19 18:50 ` Stefan Wahren
2018-01-16 12:45 ` [PATCH v3 4/4] ARM: dts: bcm2837-rpi-3-b: add GPIO expander Baruch Siach
2018-01-17 8:30 ` Stefan Wahren
[not found] ` <6c07ab6a-a2c6-284e-6205-58d2512d0256-eS4NqCHxEME@public.gmane.org>
2018-01-17 9:39 ` Linus Walleij
2018-01-19 18:52 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=061d2f80ebcd7e983411ef3b243229eff0b13186.1516105893.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=dave.stevenson@raspberrypi.org \
--cc=devicetree@vger.kernel.org \
--cc=eric@anholt.net \
--cc=frowand.list@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=mzoran@crowfest.net \
--cc=robh+dt@kernel.org \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).