devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
@ 2012-08-23  7:35 Tony Prisk
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  0 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel
  Cc: Tony Prisk, Russell King, Alessandro Zummo, Alan Cox,
	Greg Kroah-Hartman, Florian Tobias Schandinat, Arnd Bergmann,
	Grant Likely, Rob Herring, Rob Landley, Linus Walleij,
	Mike Turquette, Stephen Warren, linux-arm-kernel, linux-kernel,
	linux-fbdev, linux-usb, linux-serial, rtc-linux,
	devicetree-discuss

This patchset updates arch-vt8500 to devicetree and removes all the old-style
code. Support for WM8650 has also been added.

Example dts/dtsi files are given for the three currently supported models.

Major changes:

GPIO code has been converted to a platform_device and rewritten as WM8505
support was broken. Add support for WM8650 gpio controller.

UHCI support was missing. Added this as a generic non-pci uhci controller as
it doesn't require anything special. Should be usable by any system that doesn't
have special requirements to get the UHCI controller working.

Framebuffer code patched to support WM8650. The bindings for this are of concern
but there doesn't seem to be a formalized binding yet. This patch is based off
Sascha Hauer's current patch on the dri-devel mailing list and should be easily
patched out when its finalized.

Patchset based on Arnd's arm-soc/for-next branch.


Could I get this reviewed, hopefully for inclusion into v3.7.

Regards
Tony Prisk

Changes
v2:
Cleanup style/formatting errors
Removed erroneous commit message about GPIO not being converted to devicetree
Corrected arch-vt8500/irq.c header to correct filename
Changed GPIO driver to use module_platform_driver()
Renamed vt8500_gpio_bank_regs -> vt8500_gpio_bank_regoffsets
Changed vt8500_gpio_bank_regoffset fields to unsigned int
Changed bit-setting code to use BIT() macro
Removed of_find_compatible() and use pdev->dev.of_node in _probe()
Removed regoff field and related code - leftover from old design
Added kerneldoc regarding struct vt8500_gpio_bank_regoffsets fields
Update MODULE_LICENSE on all platform devices to "GPL v2" to match their headers
Renamed dts board files to clarify product names

v3:
Corrected serial driver issue after porting to device tree. pdev->id no longer
valid.
Corrected irq.c to properly initialize slaved interrupt controller.
Updated framebuffer drivers to use phandles for display node.
Corrected dts definitions for updated framebuffer driver.

EHCI/UHCI patch (Patch 4/9) already in -next via usb-next tree.

Included common clock frame support.
Added initialization code to arch/arm/mach-vt8500/vt8500.c for clocks.
Updated wm8650.dtsi to include basic clocks.

v4:
Added missing GPL header to clk-vt8500.c
Corrected unsigned variables in gpio-vt8500.c
Changed gpio-vt8500.c to use readl/writel _relaxed variants.
Update serial driver to get clock source from device tree.
Update dtsi files for uart clock sources.
Renamed vt8500_gpio.txt to vt8500-gpio.txt
Describe gpio flags property - currently no flags are defined, but will need
to be when gpio interrupts are supported. Kept for future compatibility.

Stephen W: I've taken a look on dri-devel mailing list and -next but haven't
seen a new binding document for Sascha's of_videomode_helper yet. I've left the
code as is for now - hopefully the OF helper will be formalized in this cycle.
I took a look at the GPIO flags - this was added on Arnd's recommendation as it
will be needed later once the GPIO controller is also an interrupt-controller.
I've add documentation that it should be =0 for now.


Tony Prisk (9):
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  rtc: vt8500: Add devicetree support for vt8500-rtc
  serial: vt8500: Add devicetree support for vt8500-serial
  usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: clk: Add Common Clock Framework support

 Documentation/devicetree/bindings/arm/vt8500.txt   |   15 +
 .../bindings/arm/vt8500/via,vt8500-intc.txt        |   16 +
 .../bindings/arm/vt8500/via,vt8500-pmc.txt         |   13 +
 .../bindings/arm/vt8500/via,vt8500-timer.txt       |   15 +
 Documentation/devicetree/bindings/clock/vt8500.txt |   72 +++
 .../devicetree/bindings/gpio/gpio-vt8500.txt       |   24 +
 .../devicetree/bindings/rtc/via,vt8500-rtc.txt     |   15 +
 .../bindings/tty/serial/via,vt8500-uart.txt        |   17 +
 .../devicetree/bindings/usb/platform-uhci.txt      |   15 +
 .../devicetree/bindings/usb/via,vt8500-ehci.txt    |   15 +
 .../devicetree/bindings/vendor-prefixes.txt        |    2 +
 .../devicetree/bindings/video/via,vt8500-fb.txt    |   48 ++
 .../devicetree/bindings/video/wm,prizm-ge-rops.txt |   13 +
 .../devicetree/bindings/video/wm,wm8505-fb.txt     |   22 +
 arch/arm/Kconfig                                   |    5 +
 arch/arm/boot/dts/vt8500-bv07.dts                  |   31 ++
 arch/arm/boot/dts/vt8500.dtsi                      |  115 +++++
 arch/arm/boot/dts/wm8505-ref.dts                   |   31 ++
 arch/arm/boot/dts/wm8505.dtsi                      |  142 ++++++
 arch/arm/boot/dts/wm8650-mid.dts                   |   31 ++
 arch/arm/boot/dts/wm8650.dtsi                      |  146 ++++++
 arch/arm/mach-vt8500/Kconfig                       |   72 +--
 arch/arm/mach-vt8500/Makefile                      |    9 +-
 arch/arm/mach-vt8500/bv07.c                        |   80 ---
 arch/arm/mach-vt8500/common.h                      |   28 ++
 arch/arm/mach-vt8500/devices-vt8500.c              |   91 ----
 arch/arm/mach-vt8500/devices-wm8505.c              |   99 ----
 arch/arm/mach-vt8500/devices.c                     |  270 -----------
 arch/arm/mach-vt8500/devices.h                     |   88 ----
 arch/arm/mach-vt8500/gpio.c                        |  240 ---------
 arch/arm/mach-vt8500/include/mach/restart.h        |    4 +-
 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h    |   88 ----
 arch/arm/mach-vt8500/include/mach/vt8500_regs.h    |   79 ---
 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h    |  115 -----
 arch/arm/mach-vt8500/include/mach/wm8505_regs.h    |   78 ---
 arch/arm/mach-vt8500/irq.c                         |  209 ++++----
 arch/arm/mach-vt8500/restart.c                     |   54 ---
 arch/arm/mach-vt8500/timer.c                       |   67 ++-
 arch/arm/mach-vt8500/vt8500.c                      |  196 ++++++++
 arch/arm/mach-vt8500/wm8505_7in.c                  |   79 ---
 drivers/clk/Makefile                               |    1 +
 drivers/clk/clk-vt8500.c                           |  511 ++++++++++++++++++++
 drivers/gpio/Kconfig                               |    6 +
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/gpio-vt8500.c                         |  316 ++++++++++++
 drivers/rtc/rtc-vt8500.c                           |    9 +-
 drivers/tty/serial/vt8500_serial.c                 |   58 ++-
 drivers/usb/host/Kconfig                           |    4 +-
 drivers/usb/host/ehci-vt8500.c                     |   25 +-
 drivers/usb/host/uhci-hcd.c                        |    5 +
 drivers/usb/host/uhci-platform.c                   |  169 +++++++
 drivers/video/Kconfig                              |    6 +-
 drivers/video/vt8500lcdfb.c                        |   79 ++-
 drivers/video/wm8505fb.c                           |   97 +++-
 drivers/video/wmt_ge_rops.c                        |    9 +-
 55 files changed, 2463 insertions(+), 1582 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
 create mode 100644 Documentation/devicetree/bindings/clock/vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
 create mode 100644 Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
 create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
 create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
 create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt
 create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
 create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
 create mode 100644 arch/arm/boot/dts/vt8500-bv07.dts
 create mode 100644 arch/arm/boot/dts/vt8500.dtsi
 create mode 100644 arch/arm/boot/dts/wm8505-ref.dts
 create mode 100644 arch/arm/boot/dts/wm8505.dtsi
 create mode 100644 arch/arm/boot/dts/wm8650-mid.dts
 create mode 100644 arch/arm/boot/dts/wm8650.dtsi
 delete mode 100644 arch/arm/mach-vt8500/bv07.c
 create mode 100644 arch/arm/mach-vt8500/common.h
 delete mode 100644 arch/arm/mach-vt8500/devices-vt8500.c
 delete mode 100644 arch/arm/mach-vt8500/devices-wm8505.c
 delete mode 100644 arch/arm/mach-vt8500/devices.c
 delete mode 100644 arch/arm/mach-vt8500/devices.h
 delete mode 100644 arch/arm/mach-vt8500/gpio.c
 delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h
 delete mode 100644 arch/arm/mach-vt8500/restart.c
 create mode 100644 arch/arm/mach-vt8500/vt8500.c
 delete mode 100644 arch/arm/mach-vt8500/wm8505_7in.c
 create mode 100644 drivers/clk/clk-vt8500.c
 create mode 100644 drivers/gpio/gpio-vt8500.c
 create mode 100644 drivers/usb/host/uhci-platform.c

-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc Tony Prisk
                     ` (9 subsequent siblings)
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Add device tree files for VT8500, WM8505 and WM8650 SoC's and
reference boards.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 arch/arm/boot/dts/vt8500-bv07.dts |   31 ++++++++
 arch/arm/boot/dts/vt8500.dtsi     |  115 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/wm8505-ref.dts  |   31 ++++++++
 arch/arm/boot/dts/wm8505.dtsi     |  142 ++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/wm8650-mid.dts  |   31 ++++++++
 arch/arm/boot/dts/wm8650.dtsi     |  146 +++++++++++++++++++++++++++++++++++++
 6 files changed, 496 insertions(+)
 create mode 100644 arch/arm/boot/dts/vt8500-bv07.dts
 create mode 100644 arch/arm/boot/dts/vt8500.dtsi
 create mode 100644 arch/arm/boot/dts/wm8505-ref.dts
 create mode 100644 arch/arm/boot/dts/wm8505.dtsi
 create mode 100644 arch/arm/boot/dts/wm8650-mid.dts
 create mode 100644 arch/arm/boot/dts/wm8650.dtsi

diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts
new file mode 100644
index 0000000..339a664
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500-bv07.dts
@@ -0,0 +1,31 @@
+/*
+ * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "vt8500.dtsi"
+
+/ {
+	model = "Benign BV07 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display {
+		xres = <800>;
+		yres = <480>;
+		left-margin = <88>;
+		right-margin = <40>;
+		hsync-len = <0>;
+		upper-margin = <32>;
+		lower-margin = <11>;
+		vsync-len = <1>;
+		bpp = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
new file mode 100644
index 0000000..17a1d0d
--- /dev/null
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -0,0 +1,115 @@
+/*
+ * vt8500.dtsi - Device tree file for VIA VT8500 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "via,vt8500";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		intc: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "via,vt8500-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d800e400 {
+			compatible = "via,vt8500-fb";
+			reg = <0xd800e400 0x400>;
+			interrupts = <12>;
+			via,display = <&display>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts
new file mode 100644
index 0000000..fcd9836
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505-ref.dts
@@ -0,0 +1,31 @@
+/*
+ * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8505.dtsi"
+
+/ {
+	model = "Wondermedia WM8505 Netbook";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display {
+		xres = <800>;
+		yres = <480>;
+		left-margin = <88>;
+		right-margin = <40>;
+		hsync-len = <0>;
+		upper-margin = <32>;
+		lower-margin = <11>;
+		vsync-len = <1>;
+		bpp = <32>;
+	};
+};
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
new file mode 100644
index 0000000..aa6d492
--- /dev/null
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -0,0 +1,142 @@
+/*
+ * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8505";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8505-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007100 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007100 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007300 {
+			compatible = "platform-uhci";
+			reg = <0xd8007300 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			via,display = <&display>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8370000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8370000 0x1040>;
+			interrupts = <31>;
+			clocks = <&ref24>;
+		};
+
+		uart@d8380000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8380000 0x1040>;
+			interrupts = <30>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts
new file mode 100644
index 0000000..d37dbf0
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650-mid.dts
@@ -0,0 +1,31 @@
+/*
+ * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8650.dtsi"
+
+/ {
+	model = "Wondermedia WM8650-MID Tablet";
+
+	/*
+	 * Display node is based on Sascha Hauer's patch on dri-devel.
+	 * Added a bpp property to calculate the size of the framebuffer
+	 * until the binding is formalized.
+	 */
+	display: display {
+		xres = <800>;
+		yres = <480>;
+		left-margin = <88>;
+		right-margin = <40>;
+		hsync-len = <0>;
+		upper-margin = <32>;
+		lower-margin = <11>;
+		vsync-len = <1>;
+		bpp = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
new file mode 100644
index 0000000..372a734
--- /dev/null
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -0,0 +1,146 @@
+/*
+ * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8650";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		gpio: gpio-controller@d8110000 {
+			compatible = "wm,wm8650-gpio";
+			gpio-controller;
+			reg = <0xd8110000 0x10000>;
+			#gpio-cells = <3>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				arm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				sdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+			via,display = <&display>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&ref24>;
+		};
+
+		uart@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&ref24>;
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+	};
+};
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  2012-08-23  7:35   ` [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial Tony Prisk
                     ` (8 subsequent siblings)
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/rtc/rtc-vt8500.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c
index 9e94fb1..07bf193 100644
--- a/drivers/rtc/rtc-vt8500.c
+++ b/drivers/rtc/rtc-vt8500.c
@@ -23,6 +23,7 @@
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /*
  * Register definitions
@@ -302,12 +303,18 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "via,vt8500-rtc", },
+	{}
+};
+
 static struct platform_driver vt8500_rtc_driver = {
 	.probe		= vt8500_rtc_probe,
 	.remove		= __devexit_p(vt8500_rtc_remove),
 	.driver		= {
 		.name	= "vt8500-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -315,5 +322,5 @@ module_platform_driver(vt8500_rtc_driver);
 
 MODULE_AUTHOR("Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
 MODULE_DESCRIPTION("VIA VT8500 SoC Realtime Clock Driver (RTC)");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:vt8500-rtc");
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  2012-08-23  7:35   ` [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23 10:53     ` Alan Cox
  2012-08-23  7:35   ` [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci Tony Prisk
                     ` (7 subsequent siblings)
  10 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Increase vt8500_max_ports to 6 as the WM8505 as 6 available uarts.
Use devicetree port id as primary addressing for ports but allow
auto-allocation if id not specified.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/tty/serial/vt8500_serial.c |   58 ++++++++++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 2be006f..205d4cf 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 /*
  * UART Register offsets
@@ -76,6 +77,8 @@
 #define RX_FIFO_INTS	(RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
 #define TX_FIFO_INTS	(TXFAE | TXFE | TXUDR)
 
+#define VT8500_MAX_PORTS	6
+
 struct vt8500_port {
 	struct uart_port	uart;
 	char			name[16];
@@ -83,6 +86,13 @@ struct vt8500_port {
 	unsigned int		ier;
 };
 
+/*
+ * we use this variable to keep track of which ports
+ * have been allocated as we can't use pdev->id in
+ * devicetree
+ */
+static unsigned long vt8500_ports_in_use;
+
 static inline void vt8500_write(struct uart_port *port, unsigned int val,
 			     unsigned int off)
 {
@@ -431,7 +441,7 @@ static int vt8500_verify_port(struct uart_port *port,
 	return 0;
 }
 
-static struct vt8500_port *vt8500_uart_ports[4];
+static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS];
 static struct uart_driver vt8500_uart_driver;
 
 #ifdef CONFIG_SERIAL_VT8500_CONSOLE
@@ -548,7 +558,9 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 {
 	struct vt8500_port *vt8500_port;
 	struct resource *mmres, *irqres;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
+	int port;
 
 	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -559,16 +571,46 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 	if (!vt8500_port)
 		return -ENOMEM;
 
+	if (np)
+		port = of_alias_get_id(np, "serial");
+		if (port > VT8500_MAX_PORTS)
+			port = -1;
+	else
+		port = -1;
+
+	if (port < 0) {
+		/* calculate the port id */
+		port = find_first_zero_bit(&vt8500_ports_in_use,
+					sizeof(vt8500_ports_in_use));
+	}
+
+	if (port > VT8500_MAX_PORTS)
+		return -ENODEV;
+
+	/* reserve the port id */
+	if (test_and_set_bit(port, &vt8500_ports_in_use)) {
+		/* port already in use - shouldn't really happen */
+		return -EBUSY;
+	}
+
 	vt8500_port->uart.type = PORT_VT8500;
 	vt8500_port->uart.iotype = UPIO_MEM;
 	vt8500_port->uart.mapbase = mmres->start;
 	vt8500_port->uart.irq = irqres->start;
 	vt8500_port->uart.fifosize = 16;
 	vt8500_port->uart.ops = &vt8500_uart_pops;
-	vt8500_port->uart.line = pdev->id;
+	vt8500_port->uart.line = port;
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-	vt8500_port->uart.uartclk = 24000000;
+
+	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (vt8500_port->clk) {
+		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
+	} else {
+		/* use the default of 24Mhz if not specified and warn */
+		pr_warn("%s: serial clock source not specified\n", __func__);
+		vt8500_port->uart.uartclk = 24000000;
+	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
@@ -579,7 +621,7 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	vt8500_uart_ports[pdev->id] = vt8500_port;
+	vt8500_uart_ports[port] = vt8500_port;
 
 	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
 
@@ -603,12 +645,18 @@ static int __devexit vt8500_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "via,vt8500-uart", },
+	{}
+};
+
 static struct platform_driver vt8500_platform_driver = {
 	.probe  = vt8500_serial_probe,
 	.remove = __devexit_p(vt8500_serial_remove),
 	.driver = {
 		.name = "vt8500_serial",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -642,4 +690,4 @@ module_exit(vt8500_serial_exit);
 
 MODULE_AUTHOR("Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
 MODULE_DESCRIPTION("Driver for vt8500 serial device");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (2 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb Tony Prisk
                     ` (6 subsequent siblings)
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Add devicetree support for vt8500-ehci.
Convert vt8500-uhci to a generic non-pci platform-uhci with
device tree support.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/usb/host/Kconfig         |    4 +-
 drivers/usb/host/ehci-vt8500.c   |   25 ++++--
 drivers/usb/host/uhci-hcd.c      |    5 ++
 drivers/usb/host/uhci-platform.c |  169 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 195 insertions(+), 8 deletions(-)
 create mode 100644 drivers/usb/host/uhci-platform.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index dcfaaa9..d7a6b10 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on USB && (PCI || SPARC_LEON)
+	depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,7 @@ config USB_UHCI_HCD
 config USB_UHCI_SUPPORT_NON_PCI_HC
 	bool
 	depends on USB_UHCI_HCD
-	default y if SPARC_LEON
+	default y if (SPARC_LEON  || ARCH_VT8500)
 
 config USB_UHCI_BIG_ENDIAN_MMIO
 	bool
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
index c1eda73..0e1637b 100644
--- a/drivers/usb/host/ehci-vt8500.c
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -16,6 +16,7 @@
  *
  */
 
+#include <linux/of.h>
 #include <linux/platform_device.h>
 
 static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
@@ -84,20 +85,23 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
 	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
+static u64 wmt_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
 	struct resource *res;
+	int irq;
 	int ret;
 
 	if (usb_disabled())
 		return -ENODEV;
 
-	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
-		pr_debug("resource[1] is not IORESOURCE_IRQ");
-		return -ENOMEM;
-	}
+	/* devicetree created devices don't specify a dma mask */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &wmt_ehci_dma_mask;
+
 	hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
 	if (!hcd)
 		return -ENOMEM;
@@ -134,8 +138,9 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev)
 
 	ehci_reset(ehci);
 
-	ret = usb_add_hcd(hcd, pdev->resource[1].start,
-			  IRQF_SHARED);
+	irq = platform_get_irq(pdev, 0);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret == 0) {
 		platform_set_drvdata(pdev, hcd);
 		return ret;
@@ -162,6 +167,11 @@ static int vt8500_ehci_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id vt8500_ehci_ids[] = {
+	{ .compatible = "via,vt8500-ehci", },
+	{}
+};
+
 static struct platform_driver vt8500_ehci_driver = {
 	.probe		= vt8500_ehci_drv_probe,
 	.remove		= vt8500_ehci_drv_remove,
@@ -169,7 +179,10 @@ static struct platform_driver vt8500_ehci_driver = {
 	.driver = {
 		.name	= "vt8500-ehci",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(vt8500_ehci_ids),
 	}
 };
 
 MODULE_ALIAS("platform:vt8500-ehci");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e4db350..5da5c99 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd";
 #define PLATFORM_DRIVER		uhci_grlib_driver
 #endif
 
+#ifdef CONFIG_ARCH_VT8500
+#include "uhci-platform.c"
+#define PLATFORM_DRIVER		uhci_platform_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
 #error "missing bus glue for uhci-hcd"
 #endif
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
new file mode 100644
index 0000000..35ca094
--- /dev/null
+++ b/drivers/usb/host/uhci-platform.c
@@ -0,0 +1,169 @@
+/*
+ * Generic UHCI HCD (Host Controller Driver) for Platform Devices
+ *
+ * Copyright (c) 2011 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * This file is based on uhci-grlib.c
+ * (C) Copyright 2004-2007 Alan Stern, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int uhci_platform_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Set up pointers to to generic functions */
+	uhci->reset_hc = uhci_generic_reset_hc;
+	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+	/* No special actions need to be taken for the functions below */
+	uhci->configure_hc = NULL;
+	uhci->resume_detect_interrupts_are_broken = NULL;
+	uhci->global_suspend_mode_is_broken = NULL;
+
+	/* Reset if the controller isn't already safely quiescent. */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+static const struct hc_driver uhci_platform_hc_driver = {
+	.description =          hcd_name,
+	.product_desc =         "Generic UHCI Host Controller",
+	.hcd_priv_size =        sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =                  uhci_irq,
+	.flags =                HCD_MEMORY | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =                uhci_platform_init,
+	.start =                uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =          NULL,
+	.pci_resume =           NULL,
+	.bus_suspend =          uhci_rh_suspend,
+	.bus_resume =           uhci_rh_resume,
+#endif
+	.stop =                 uhci_stop,
+
+	.urb_enqueue =          uhci_urb_enqueue,
+	.urb_dequeue =          uhci_urb_dequeue,
+
+	.endpoint_disable =     uhci_hcd_endpoint_disable,
+	.get_frame_number =     uhci_hcd_get_frame_number,
+
+	.hub_status_data =      uhci_hub_status_data,
+	.hub_control =          uhci_hub_control,
+};
+
+static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
+
+static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct uhci_hcd *uhci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &platform_uhci_dma_mask;
+
+	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
+				pdev->name);
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_err("%s: request_mem_region failed\n", __func__);
+		ret = -EBUSY;
+		goto err_rmr;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_err("%s: ioremap failed\n", __func__);
+		ret = -ENOMEM;
+		goto err_irq;
+	}
+	uhci = hcd_to_uhci(hcd);
+
+	uhci->regs = hcd->regs;
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
+								IRQF_SHARED);
+	if (ret)
+		goto err_uhci;
+
+	return 0;
+
+err_uhci:
+	iounmap(hcd->regs);
+err_irq:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int uhci_hcd_platform_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_platform_shutdown(struct platform_device *op)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id platform_uhci_ids[] = {
+	{ .compatible = "platform-uhci", },
+	{}
+};
+
+static struct platform_driver uhci_platform_driver = {
+	.probe          = uhci_hcd_platform_probe,
+	.remove         = uhci_hcd_platform_remove,
+	.shutdown       = uhci_hcd_platform_shutdown,
+	.driver = {
+		.name = "platform-uhci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(platform_uhci_ids),
+	},
+};
+
+MODULE_ALIAS("platform:platform-uhci");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, platform_uhci_ids);
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (3 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support Tony Prisk
                     ` (5 subsequent siblings)
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Update vt8500-fb, wm8505-fb and wmt-ge-rops to support device
tree bindings.
Small change in wm8505-fb.c to support WM8650 framebuffer color
format.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/video/Kconfig       |    6 +--
 drivers/video/vt8500lcdfb.c |   79 ++++++++++++++++++++++++++++++-----
 drivers/video/wm8505fb.c    |   97 ++++++++++++++++++++++++++++++++++++-------
 drivers/video/wmt_ge_rops.c |    9 +++-
 4 files changed, 161 insertions(+), 30 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0217f74..b66d951 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1788,7 +1788,7 @@ config FB_AU1200
 
 config FB_VT8500
 	bool "VT8500 LCD Driver"
-	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500
+	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_WMT_GE_ROPS
 	select FB_SYS_IMAGEBLIT
 	help
@@ -1797,11 +1797,11 @@ config FB_VT8500
 
 config FB_WM8505
 	bool "WM8505 frame buffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505
+	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_WMT_GE_ROPS
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505
+	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
 source "drivers/video/geode/Kconfig"
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index 2a5fe6e..758e359 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -35,6 +35,13 @@
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
 
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+#endif
+
+
 #define to_vt8500lcd_info(__info) container_of(__info, \
 						struct vt8500lcd_info, fb)
 
@@ -270,15 +277,21 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 {
 	struct vt8500lcd_info *fbi;
 	struct resource *res;
-	struct vt8500fb_platform_data *pdata = pdev->dev.platform_data;
 	void *addr;
 	int irq, ret;
 
+	struct fb_videomode	of_mode;
+	struct device_node	*np;
+	u32			bpp;
+	dma_addr_t fb_mem_phys;
+	unsigned long fb_mem_len;
+	void *fb_mem_virt;
+
 	ret = -ENOMEM;
 	fbi = NULL;
 
-	fbi = kzalloc(sizeof(struct vt8500lcd_info) + sizeof(u32) * 16,
-							GFP_KERNEL);
+	fbi = devm_kzalloc(&pdev->dev, sizeof(struct vt8500lcd_info)
+			+ sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
 		ret = -ENOMEM;
@@ -333,9 +346,45 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
-	fbi->fb.fix.smem_len	= pdata->video_mem_len;
-	fbi->fb.screen_base	= pdata->video_mem_virt;
+	np = of_parse_phandle(pdev->dev.of_node, "via,display", 0);
+	if (!np) {
+		pr_err("%s: No display description in Device Tree\n", __func__);
+		ret = -EINVAL;
+		goto failed_free_res;
+	}
+
+	/*
+	 * This code is copied from Sascha Hauer's of_videomode helper
+	 * and can be replaced with a call to the helper once mainlined
+	 */
+	ret = 0;
+	ret |= of_property_read_u32(np, "xres", &of_mode.xres);
+	ret |= of_property_read_u32(np, "yres", &of_mode.yres);
+	ret |= of_property_read_u32(np, "left-margin", &of_mode.left_margin);
+	ret |= of_property_read_u32(np, "right-margin", &of_mode.right_margin);
+	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
+	ret |= of_property_read_u32(np, "upper-margin", &of_mode.upper_margin);
+	ret |= of_property_read_u32(np, "lower-margin", &of_mode.lower_margin);
+	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
+	ret |= of_property_read_u32(np, "bpp", &bpp);
+	if (ret) {
+		pr_err("%s: Unable to read display properties\n", __func__);
+		goto failed_free_res;
+	}
+	of_mode.vmode = FB_VMODE_NONINTERLACED;
+
+	/* try allocating the framebuffer */
+	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+				GFP_KERNEL);
+	if (!fb_mem_virt) {
+		pr_err("%s: Failed to allocate framebuffer\n", __func__);
+		return -ENOMEM;
+	};
+
+	fbi->fb.fix.smem_start	= fb_mem_phys;
+	fbi->fb.fix.smem_len	= fb_mem_len;
+	fbi->fb.screen_base	= fb_mem_virt;
 
 	fbi->palette_size	= PAGE_ALIGN(512);
 	fbi->palette_cpu	= dma_alloc_coherent(&pdev->dev,
@@ -370,10 +419,11 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_irq;
 	}
 
-	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
-	fbi->fb.var.bits_per_pixel	= pdata->bpp;
-	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
-	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
+	fb_videomode_to_var(&fbi->fb.var, &of_mode);
+
+	fbi->fb.var.xres_virtual	= of_mode.xres;
+	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.bits_per_pixel	= bpp;
 
 	ret = vt8500lcd_set_par(&fbi->fb);
 	if (ret) {
@@ -448,12 +498,18 @@ static int __devexit vt8500lcd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id via_dt_ids[] = {
+	{ .compatible = "via,vt8500-fb", },
+	{}
+};
+
 static struct platform_driver vt8500lcd_driver = {
 	.probe		= vt8500lcd_probe,
 	.remove		= __devexit_p(vt8500lcd_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "vt8500-lcd",
+		.of_match_table = of_match_ptr(via_dt_ids),
 	},
 };
 
@@ -461,4 +517,5 @@ module_platform_driver(vt8500lcd_driver);
 
 MODULE_AUTHOR("Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
 MODULE_DESCRIPTION("LCD controller driver for VIA VT8500");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, via_dt_ids);
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index c8703bd..d4448b0 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -28,6 +28,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/wait.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
 
 #include <mach/vt8500fb.h>
 
@@ -59,8 +62,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
 	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
 	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
 
-	/* Set in-memory picture format to RGB 32bpp */
-	writel(0x1c,		       fbi->regbase + WMT_GOVR_COLORSPACE);
+	/*
+	 * Set in-memory picture format to RGB
+	 * 0x31C sets the correct color mode (RGB565) for WM8650
+	 * Bit 8+9 (0x300) are ignored on WM8505 as reserved
+	 */
+	writel(0x31c,		       fbi->regbase + WMT_GOVR_COLORSPACE);
 	writel(1,		       fbi->regbase + WMT_GOVR_COLORSPACE1);
 
 	/* Virtual buffer size */
@@ -127,6 +134,18 @@ static int wm8505fb_set_par(struct fb_info *info)
 		info->var.blue.msb_right = 0;
 		info->fix.visual = FB_VISUAL_TRUECOLOR;
 		info->fix.line_length = info->var.xres_virtual << 2;
+	} else if (info->var.bits_per_pixel == 16) {
+		info->var.red.offset = 11;
+		info->var.red.length = 5;
+		info->var.red.msb_right = 0;
+		info->var.green.offset = 5;
+		info->var.green.length = 6;
+		info->var.green.msb_right = 0;
+		info->var.blue.offset = 0;
+		info->var.blue.length = 5;
+		info->var.blue.msb_right = 0;
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.line_length = info->var.xres_virtual << 1;
 	}
 
 	wm8505fb_set_timing(info);
@@ -246,16 +265,20 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
 	struct wm8505fb_info	*fbi;
 	struct resource		*res;
 	void			*addr;
-	struct vt8500fb_platform_data *pdata;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
+	struct fb_videomode	of_mode;
+	struct device_node	*np;
+	u32			bpp;
+	dma_addr_t fb_mem_phys;
+	unsigned long fb_mem_len;
+	void *fb_mem_virt;
 
 	ret = -ENOMEM;
 	fbi = NULL;
 
-	fbi = kzalloc(sizeof(struct wm8505fb_info) + sizeof(u32) * 16,
-							GFP_KERNEL);
+	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
+			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
 		ret = -ENOMEM;
@@ -305,21 +328,58 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
+	np = of_parse_phandle(pdev->dev.of_node, "via,display", 0);
+	if (!np) {
+		pr_err("%s: No display description in Device Tree\n", __func__);
+		ret = -EINVAL;
+		goto failed_free_res;
+	}
+
+	/*
+	 * This code is copied from Sascha Hauer's of_videomode helper
+	 * and can be replaced with a call to the helper once mainlined
+	 */
+	ret = 0;
+	ret |= of_property_read_u32(np, "xres", &of_mode.xres);
+	ret |= of_property_read_u32(np, "yres", &of_mode.yres);
+	ret |= of_property_read_u32(np, "left-margin", &of_mode.left_margin);
+	ret |= of_property_read_u32(np, "right-margin", &of_mode.right_margin);
+	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
+	ret |= of_property_read_u32(np, "upper-margin", &of_mode.upper_margin);
+	ret |= of_property_read_u32(np, "lower-margin", &of_mode.lower_margin);
+	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
+	ret |= of_property_read_u32(np, "bpp", &bpp);
+	if (ret) {
+		pr_err("%s: Unable to read display properties\n", __func__);
+		goto failed_free_res;
+	}
+
+	of_mode.vmode = FB_VMODE_NONINTERLACED;
+	fb_videomode_to_var(&fbi->fb.var, &of_mode);
 
 	fbi->fb.var.nonstd		= 0;
 	fbi->fb.var.activate		= FB_ACTIVATE_NOW;
 
 	fbi->fb.var.height		= -1;
 	fbi->fb.var.width		= -1;
-	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
-	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
-	fbi->fb.var.bits_per_pixel	= pdata->bpp;
 
-	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
-	fbi->fb.fix.smem_len	= pdata->video_mem_len;
-	fbi->fb.screen_base	= pdata->video_mem_virt;
-	fbi->fb.screen_size	= pdata->video_mem_len;
+	/* try allocating the framebuffer */
+	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+				GFP_KERNEL);
+	if (!fb_mem_virt) {
+		pr_err("%s: Failed to allocate framebuffer\n", __func__);
+		return -ENOMEM;
+	};
+
+	fbi->fb.var.xres_virtual	= of_mode.xres;
+	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.bits_per_pixel	= bpp;
+
+	fbi->fb.fix.smem_start		= fb_mem_phys;
+	fbi->fb.fix.smem_len		= fb_mem_len;
+	fbi->fb.screen_base		= fb_mem_virt;
+	fbi->fb.screen_size		= fb_mem_len;
 
 	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
 		dev_err(&pdev->dev, "Failed to allocate color map\n");
@@ -395,12 +455,18 @@ static int __devexit wm8505fb_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "wm,wm8505-fb", },
+	{}
+};
+
 static struct platform_driver wm8505fb_driver = {
 	.probe		= wm8505fb_probe,
 	.remove		= __devexit_p(wm8505fb_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -408,4 +474,5 @@ module_platform_driver(wm8505fb_driver);
 
 MODULE_AUTHOR("Ed Spiridonov <edo.rus-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
 MODULE_DESCRIPTION("Framebuffer driver for WMT WM8505");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_dt_ids);
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
index 55be386..ba025b4 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/wmt_ge_rops.c
@@ -158,12 +158,18 @@ static int __devexit wmt_ge_rops_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "wm,prizm-ge-rops", },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver wmt_ge_rops_driver = {
 	.probe		= wmt_ge_rops_probe,
 	.remove		= __devexit_p(wmt_ge_rops_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "wmt_ge_rops",
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -172,4 +178,5 @@ module_platform_driver(wmt_ge_rops_driver);
 MODULE_AUTHOR("Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org");
 MODULE_DESCRIPTION("Accelerators for raster operations using "
 		   "WonderMedia Graphics Engine");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_dt_ids);
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (4 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23  7:35   ` [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices Tony Prisk
                     ` (4 subsequent siblings)
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

Merged existing board files to a single dt-capable file.
Converted irq and timer code to devicetree.
Removed existing device files that are no longer required with
devicetree support.
All existing platform devices are converted to devicetree nodes
except PWM.

Removed restart.c and moved code into vt8500.c to remove
duplicate PMC code.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 arch/arm/Kconfig                                |    5 +
 arch/arm/mach-vt8500/Kconfig                    |   72 +-----
 arch/arm/mach-vt8500/Makefile                   |    9 +-
 arch/arm/mach-vt8500/bv07.c                     |   80 -------
 arch/arm/mach-vt8500/common.h                   |   28 +++
 arch/arm/mach-vt8500/devices-vt8500.c           |   91 --------
 arch/arm/mach-vt8500/devices-wm8505.c           |   99 ---------
 arch/arm/mach-vt8500/devices.c                  |  270 -----------------------
 arch/arm/mach-vt8500/devices.h                  |   88 --------
 arch/arm/mach-vt8500/gpio.c                     |  240 --------------------
 arch/arm/mach-vt8500/include/mach/restart.h     |    4 +-
 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h |   88 --------
 arch/arm/mach-vt8500/include/mach/vt8500_regs.h |   79 -------
 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h |  115 ----------
 arch/arm/mach-vt8500/include/mach/wm8505_regs.h |   78 -------
 arch/arm/mach-vt8500/irq.c                      |  209 +++++++++++-------
 arch/arm/mach-vt8500/restart.c                  |   54 -----
 arch/arm/mach-vt8500/timer.c                    |   67 ++++--
 arch/arm/mach-vt8500/vt8500.c                   |  196 ++++++++++++++++
 arch/arm/mach-vt8500/wm8505_7in.c               |   79 -------
 20 files changed, 413 insertions(+), 1538 deletions(-)
 delete mode 100644 arch/arm/mach-vt8500/bv07.c
 create mode 100644 arch/arm/mach-vt8500/common.h
 delete mode 100644 arch/arm/mach-vt8500/devices-vt8500.c
 delete mode 100644 arch/arm/mach-vt8500/devices-wm8505.c
 delete mode 100644 arch/arm/mach-vt8500/devices.c
 delete mode 100644 arch/arm/mach-vt8500/devices.h
 delete mode 100644 arch/arm/mach-vt8500/gpio.c
 delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
 delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h
 delete mode 100644 arch/arm/mach-vt8500/restart.c
 create mode 100644 arch/arm/mach-vt8500/vt8500.c
 delete mode 100644 arch/arm/mach-vt8500/wm8505_7in.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6774c80..ea8ec75 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -996,6 +996,10 @@ config ARCH_VT8500
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_PWM
+	select USE_OF
+	select COMMON_CLK
+	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
@@ -1613,6 +1617,7 @@ config ARCH_NR_GPIO
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 288 if ARCH_VT8500
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2c20a34..44f9f9d 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,73 +1,15 @@
 if ARCH_VT8500
 
-config VTWM_VERSION_VT8500
+config VTWM_VERSION_WMT_DT
 	bool
 
-config VTWM_VERSION_WM8505
-	bool
-
-config MACH_BV07
-	bool "Benign BV07-8500 Mini Netbook"
-	depends on ARCH_VT8500
-	select VTWM_VERSION_VT8500
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a VIA VT8500 chip.
-
-config MACH_WM8505_7IN_NETBOOK
-	bool "WM8505 7-inch generic netbook"
+config MACH_WMT_DT
+	bool "VIA/Wondermedia SoC based boards (Device Tree Support)"
 	depends on ARCH_VT8500
-	select VTWM_VERSION_WM8505
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a WonderMedia WM8505 chip.
-
-comment "LCD panel size"
-
-config WMT_PANEL_800X480
-	bool "7-inch with 800x480 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	default y
-	help
-	  These are found in most of the netbooks in generic cases, as
-	  well as in Eken M001 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x480' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_800X600
-	bool "8-inch with 800x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M003 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X576
-	bool "10-inch with 1024x576 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
+	select VTWM_VERSION_WMT_DT
 	help
-	  These are found in CherryPal netbooks and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x576' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X600
-	bool "10-inch with 1024x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M006 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
+	  Add support for netbooks, tablets and other devices based on
+	  the reference board design as produced by VIA/WonderMedia, using
+	  VT8500/WM8505/WM8650 System-on-Chip.
 
 endif
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 54e6997..1966183 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1,9 +1,4 @@
-obj-y += devices.o gpio.o irq.o timer.o restart.o
-
-obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
-obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
-
-obj-$(CONFIG_MACH_BV07) += bv07.o
-obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+obj-$(CONFIG_VTWM_VERSION_WMT_DT) += irq.o timer.o
+obj-$(CONFIG_MACH_WMT_DT) += vt8500.o
 
 obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
deleted file mode 100644
index f9fbeb2..0000000
--- a/arch/arm/mach-vt8500/bv07.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/bv07.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/restart.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_lcdc,
-	&vt8500_device_ehci,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init bv07_init(void)
-{
-#ifdef CONFIG_FB_VT8500
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-
-	wmt_setup_restart();
-	vt8500_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-	.atag_offset	= 0x100,
-	.restart	= wmt_restart,
-	.reserve	= vt8500_reserve_mem,
-	.map_io		= vt8500_map_io,
-	.init_irq	= vt8500_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= bv07_init,
-MACHINE_END
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
new file mode 100644
index 0000000..2b24196
--- /dev/null
+++ b/arch/arm/mach-vt8500/common.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/mach-vt8500/dt_common.h
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H
+#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H
+
+#include <linux/of.h>
+
+void __init vt8500_timer_init(void);
+int __init vt8500_irq_init(struct device_node *node,
+				struct device_node *parent);
+
+/* defined in drivers/clk/clk-vt8500.c */
+void __init vtwm_clk_init(void __iomem *pmc_base);
+
+#endif
diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c
deleted file mode 100644
index 19519ae..0000000
--- a/arch/arm/mach-vt8500/devices-vt8500.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-vt8500.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/vt8500_regs.h>
-#include <mach/vt8500_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init vt8500_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
-	tmp[1] = wmt_irq_res(IRQ_LCDC);
-	wmt_res_add(&vt8500_device_lcdc, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init vt8500_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = VT8500_IC_BASE;
-	wmt_gpio_base = VT8500_GPIO_BASE;
-	wmt_pmc_base = VT8500_PMC_BASE;
-	wmt_i8042_base = VT8500_PS2_BASE;
-
-	wmt_nr_irqs = VT8500_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init vt8500_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	vt8500_set_externs();
-}
diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c
deleted file mode 100644
index db4594e..0000000
--- a/arch/arm/mach-vt8500/devices-wm8505.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-wm8505.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/wm8505_regs.h>
-#include <mach/wm8505_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init wm8505_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
-	wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART4);
-	wmt_res_add(&vt8500_device_uart4, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART5);
-	wmt_res_add(&vt8500_device_uart5, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init wm8505_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = WM8505_IC_BASE;
-	wmt_sic_base = WM8505_SIC_BASE;
-	wmt_gpio_base = WM8505_GPIO_BASE;
-	wmt_pmc_base = WM8505_PMC_BASE;
-	wmt_i8042_base = WM8505_PS2_BASE;
-
-	wmt_nr_irqs = WM8505_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init wm8505_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	wm8505_set_externs();
-}
diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c
deleted file mode 100644
index 1fcdc36..0000000
--- a/arch/arm/mach-vt8500/devices.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/vt8500fb.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-/* These can't use resources currently */
-unsigned long wmt_ic_base __initdata;
-unsigned long wmt_sic_base __initdata;
-unsigned long wmt_gpio_base __initdata;
-unsigned long wmt_pmc_base __initdata;
-unsigned long wmt_i8042_base __initdata;
-
-int wmt_nr_irqs __initdata;
-int wmt_timer_irq __initdata;
-int wmt_gpio_ext_irq[8] __initdata;
-
-/* Should remain accessible after init.
- * i8042 driver desperately calls for attention...
- */
-int wmt_i8042_kbd_irq;
-int wmt_i8042_aux_irq;
-
-static u64 fb_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_lcdc = {
-	.name           = "vt8500-lcd",
-	.id             = 0,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_wm8505_fb = {
-	.name           = "wm8505-fb",
-	.id             = 0,
-};
-
-/* Smallest to largest */
-static struct vt8500fb_platform_data panels[] = {
-#ifdef CONFIG_WMT_PANEL_800X480
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 480 * 2,
-	.mode		= {
-		.name		= "800x480",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_800X600
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "800x600",
-		.xres		= 800,
-		.yres		= 600,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X576
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 576 * 2,
-	.mode		= {
-		.name		= "1024x576",
-		.xres		= 1024,
-		.yres		= 576,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X600
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "1024x600",
-		.xres		= 1024,
-		.yres		= 600,
-		.left_margin	= 66,
-		.right_margin	= 2,
-		.upper_margin	= 19,
-		.lower_margin	= 1,
-		.hsync_len	= 23,
-		.vsync_len	= 8,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-};
-
-static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
-
-static int __init panel_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(panels); i++) {
-		if (strcmp(panels[i].mode.name, str) == 0) {
-			current_panel_idx = i;
-			break;
-		}
-	}
-	return 0;
-}
-
-early_param("panel", panel_setup);
-
-static inline void preallocate_fb(struct vt8500fb_platform_data *p,
-				  unsigned long align) {
-	p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
-			(p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
-					(8 / p->bpp) + 1));
-	p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
-							  align);
-	p->video_mem_virt = phys_to_virt(p->video_mem_phys);
-}
-
-struct platform_device vt8500_device_uart0 = {
-	.name		= "vt8500_serial",
-	.id		= 0,
-};
-
-struct platform_device vt8500_device_uart1 = {
-	.name		= "vt8500_serial",
-	.id		= 1,
-};
-
-struct platform_device vt8500_device_uart2 = {
-	.name		= "vt8500_serial",
-	.id		= 2,
-};
-
-struct platform_device vt8500_device_uart3 = {
-	.name		= "vt8500_serial",
-	.id		= 3,
-};
-
-struct platform_device vt8500_device_uart4 = {
-	.name		= "vt8500_serial",
-	.id		= 4,
-};
-
-struct platform_device vt8500_device_uart5 = {
-	.name		= "vt8500_serial",
-	.id		= 5,
-};
-
-static u64 ehci_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_ehci = {
-	.name		= "vt8500-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask	= &ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_ge_rops = {
-	.name		= "wmt_ge_rops",
-	.id		= -1,
-};
-
-struct platform_device vt8500_device_pwm = {
-	.name		= "vt8500-pwm",
-	.id		= 0,
-};
-
-static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 128,
-	.dft_brightness = 70,
-	.pwm_period_ns	= 250000, /* revisit when clocks are implemented */
-};
-
-struct platform_device vt8500_device_pwmbl = {
-	.name		= "pwm-backlight",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &vt8500_pwmbl_data,
-	},
-};
-
-struct platform_device vt8500_device_rtc = {
-	.name		= "vt8500-rtc",
-	.id		= 0,
-};
-
-struct map_desc wmt_io_desc[] __initdata = {
-	/* SoC MMIO registers */
-	[0] = {
-		.virtual	= 0xf8000000,
-		.pfn		= __phys_to_pfn(0xd8000000),
-		.length		= 0x00390000, /* max of all chip variants */
-		.type		= MT_DEVICE
-	},
-	/* PCI I/O space, numbers tied to those in <mach/io.h> */
-	[1] = {
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xc0000000),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init vt8500_reserve_mem(void)
-{
-#ifdef CONFIG_FB_VT8500
-	panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
-	preallocate_fb(&panels[current_panel_idx], SZ_4M);
-	vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
-
-void __init wm8505_reserve_mem(void)
-{
-#if defined CONFIG_FB_WM8505
-	panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
-	preallocate_fb(&panels[current_panel_idx], 32);
-	vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h
deleted file mode 100644
index 188d4e1..0000000
--- a/arch/arm/mach-vt8500/devices.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
-#define __ARCH_ARM_MACH_VT8500_DEVICES_H
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-
-void __init vt8500_init_irq(void);
-void __init wm8505_init_irq(void);
-void __init vt8500_map_io(void);
-void __init wm8505_map_io(void);
-void __init vt8500_reserve_mem(void);
-void __init wm8505_reserve_mem(void);
-void __init vt8500_gpio_init(void);
-void __init vt8500_set_resources(void);
-void __init wm8505_set_resources(void);
-
-extern unsigned long wmt_ic_base __initdata;
-extern unsigned long wmt_sic_base __initdata;
-extern unsigned long wmt_gpio_base __initdata;
-extern unsigned long wmt_pmc_base __initdata;
-
-extern int wmt_nr_irqs __initdata;
-extern int wmt_timer_irq __initdata;
-extern int wmt_gpio_ext_irq[8] __initdata;
-
-extern struct map_desc wmt_io_desc[2] __initdata;
-
-static inline struct resource wmt_mmio_res(u32 start, u32 size)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_MEM,
-		.start = start,
-		.end = start + size - 1,
-	};
-
-	return tmp;
-}
-
-static inline struct resource wmt_irq_res(int irq)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_IRQ,
-		.start = irq,
-		.end = irq,
-	};
-
-	return tmp;
-}
-
-static inline void wmt_res_add(struct platform_device *pdev,
-			       const struct resource *res, unsigned int num)
-{
-	if (unlikely(platform_device_add_resources(pdev, res, num)))
-		pr_err("Failed to assign resources\n");
-}
-
-extern struct sys_timer vt8500_timer;
-
-extern struct platform_device vt8500_device_uart0;
-extern struct platform_device vt8500_device_uart1;
-extern struct platform_device vt8500_device_uart2;
-extern struct platform_device vt8500_device_uart3;
-extern struct platform_device vt8500_device_uart4;
-extern struct platform_device vt8500_device_uart5;
-
-extern struct platform_device vt8500_device_lcdc;
-extern struct platform_device vt8500_device_wm8505_fb;
-extern struct platform_device vt8500_device_ehci;
-extern struct platform_device vt8500_device_ge_rops;
-extern struct platform_device vt8500_device_pwm;
-extern struct platform_device vt8500_device_pwmbl;
-extern struct platform_device vt8500_device_rtc;
-#endif
diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c
deleted file mode 100644
index 2bcc0ec..0000000
--- a/arch/arm/mach-vt8500/gpio.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/* linux/arch/arm/mach-vt8500/gpio.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include "devices.h"
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-#define ENABLE_REGS	0x0
-#define DIRECTION_REGS	0x20
-#define OUTVALUE_REGS	0x40
-#define INVALUE_REGS	0x60
-
-#define EXT_REGOFF	0x1c
-
-static void __iomem *regbase;
-
-struct vt8500_gpio_chip {
-	struct gpio_chip	chip;
-	unsigned int		shift;
-	unsigned int		regoff;
-};
-
-static int gpio_to_irq_map[8];
-
-static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
-				     unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
-				   unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-}
-
-static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-		val |= (1 << vt8500_chip->shift << offset);
-		writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-	}
-	return 0;
-}
-
-static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
-	return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
-		>> vt8500_chip->shift >> offset) & 1;
-}
-
-static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
-
-	if (value)
-		val |= (1 << vt8500_chip->shift << offset);
-	else
-		val &= ~(1 << vt8500_chip->shift << offset);
-
-	writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
-}
-
-#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num)		\
-{									\
-	.chip = {							\
-		.label			= __name,			\
-		.request		= vt8500_muxed_gpio_request,	\
-		.free			= vt8500_muxed_gpio_free,	\
-		.direction_input  = vt8500_muxed_gpio_direction_input,	\
-		.direction_output = vt8500_muxed_gpio_direction_output,	\
-		.get			= vt8500_muxed_gpio_get_value,	\
-		.set			= vt8500_muxed_gpio_set_value,	\
-		.can_sleep		= 0,				\
-		.base			= __base,			\
-		.ngpio			= __num,			\
-	},								\
-	.shift		= __shift,					\
-	.regoff		= __off,					\
-}
-
-static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
-	VT8500_GPIO_BANK("uart0",	0,	0x0,	8,	4),
-	VT8500_GPIO_BANK("uart1",	4,	0x0,	12,	4),
-	VT8500_GPIO_BANK("spi0",	8,	0x0,	16,	4),
-	VT8500_GPIO_BANK("spi1",	12,	0x0,	20,	4),
-	VT8500_GPIO_BANK("spi2",	16,	0x0,	24,	4),
-	VT8500_GPIO_BANK("pwmout",	24,	0x0,	28,	2),
-
-	VT8500_GPIO_BANK("sdmmc",	0,	0x4,	30,	11),
-	VT8500_GPIO_BANK("ms",		16,	0x4,	41,	7),
-	VT8500_GPIO_BANK("i2c0",	24,	0x4,	48,	2),
-	VT8500_GPIO_BANK("i2c1",	26,	0x4,	50,	2),
-
-	VT8500_GPIO_BANK("mii",		0,	0x8,	52,	20),
-	VT8500_GPIO_BANK("see",		20,	0x8,	72,	4),
-	VT8500_GPIO_BANK("ide",		24,	0x8,	76,	7),
-
-	VT8500_GPIO_BANK("ccir",	0,	0xc,	83,	19),
-
-	VT8500_GPIO_BANK("ts",		8,	0x10,	102,	11),
-
-	VT8500_GPIO_BANK("lcd",		0,	0x14,	113,	23),
-};
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val &= ~(1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-	return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val |= (1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-		val |= (1 << offset);
-		writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-	}
-	return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-
-	if (value)
-		val |= (1 << offset);
-	else
-		val &= ~(1 << offset);
-
-	writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-}
-
-static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 7)
-		return -EINVAL;
-
-	return gpio_to_irq_map[offset];
-}
-
-static struct gpio_chip vt8500_external_gpios = {
-	.label			= "extgpio",
-	.direction_input	= vt8500_gpio_direction_input,
-	.direction_output	= vt8500_gpio_direction_output,
-	.get			= vt8500_gpio_get_value,
-	.set			= vt8500_gpio_set_value,
-	.to_irq			= vt8500_gpio_to_irq,
-	.can_sleep		= 0,
-	.base			= 0,
-	.ngpio			= 8,
-};
-
-void __init vt8500_gpio_init(void)
-{
-	int i;
-
-	for (i = 0; i < 8; i++)
-		gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
-
-	regbase = ioremap(wmt_gpio_base, SZ_64K);
-	if (!regbase) {
-		printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
-		return;
-	}
-
-	gpiochip_add(&vt8500_external_gpios);
-
-	for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
-		gpiochip_add(&vt8500_muxed_gpios[i].chip);
-}
diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h
index 89f9b78..7389795 100644
--- a/arch/arm/mach-vt8500/include/mach/restart.h
+++ b/arch/arm/mach-vt8500/include/mach/restart.h
@@ -13,5 +13,5 @@
  *
  */
 
-void wmt_setup_restart(void);
-void wmt_restart(char mode, const char *cmd);
+void vt8500_setup_restart(void);
+void vt8500_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
deleted file mode 100644
index ecfee91..0000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* VT8500 Interrupt Sources */
-
-#define IRQ_JPEGENC	0	/* JPEG Encoder */
-#define IRQ_JPEGDEC	1	/* JPEG Decoder */
-				/* Reserved */
-#define IRQ_PATA	3	/* PATA Controller */
-				/* Reserved */
-#define IRQ_DMA		5	/* DMA Controller */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_GE		8	/* Graphic Engine */
-#define IRQ_GOV		9	/* Graphic Overlay Engine */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-#define IRQ_MPEGTS	11	/* Transport Stream Interface */
-#define IRQ_LCDC	12	/* LCD Controller */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_CIPHER	16	/* Cipher */
-#define IRQ_VPP		17	/* Video Post-Processor */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-				/* Reserved */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_LCDDF	27	/* LCD Data Formatter */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_MS		30	/* MemoryStick Controller */
-#define IRQ_MS_DMA	31	/* MemoryStick Controller DMA */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_I2S		34	/* I2S */
-#define IRQ_PCM		35	/* PCM */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_VPU		40	/* Video Processing Unit */
-#define IRQ_VID		41	/* Video Digital Input Interface */
-#define IRQ_AC97	42	/* AC97 Interface */
-#define IRQ_EHCI	43	/* USB */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_PS2MOUSE	45	/* PS/2 Mouse */
-#define IRQ_PS2KBD	46	/* PS/2 Keyboard */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_ADC		51	/* ADC */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_DMA0	56	/* DMA Channel 0 */
-#define IRQ_DMA1	57	/* DMA Channel 1 */
-#define IRQ_DMA2	58	/* DMA Channel 2 */
-#define IRQ_DMA3	59	/* DMA Channel 3 */
-#define IRQ_DMA4	60	/* DMA Channel 4 */
-#define IRQ_DMA5	61	/* DMA Channel 5 */
-#define IRQ_DMA6	62	/* DMA Channel 6 */
-#define IRQ_DMA7	63	/* DMA Channel 7 */
-
-#define VT8500_NR_IRQS		64
diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
deleted file mode 100644
index 29c63ec..0000000
--- a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
-#define __ASM_ARM_ARCH_VT8500_REGS_H
-
-/* VT8500 Registers Map */
-
-#define VT8500_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define VT8500_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define VT8500_DDR_BASE		0xd8000000	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define VT8500_DMA_BASE		0xd8001000	/* 1k	DMA Controller */
-#define VT8500_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define VT8500_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define VT8500_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define VT8500_USB_BASE		0xd8007800	/* 2k	USB OTG */
-# define VT8500_EHCI_BASE	0xd8007900	/*	EHCI */
-# define VT8500_UHCI_BASE	0xd8007b01	/*	UHCI */
-#define VT8500_PATA_BASE	0xd8008000	/* 512	PATA */
-#define VT8500_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define VT8500_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define VT8500_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define VT8500_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define VT8500_MS_BASE		0xd800b000	/* 1k	MS/MSPRO Controller */
-#define VT8500_LCDC_BASE	0xd800e400	/* 1k	LCD Controller */
-#define VT8500_VPU_BASE		0xd8050000	/* 256	VPU */
-#define VT8500_GOV_BASE		0xd8050300	/* 256	GOV */
-#define VT8500_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define VT8500_LCDF_BASE	0xd8050900	/* 256	LCD Formatter */
-#define VT8500_VID_BASE		0xd8050a00	/* 256	VID */
-#define VT8500_VPP_BASE		0xd8050b00	/* 256	VPP */
-#define VT8500_TSBK_BASE	0xd80f4000	/* 4k	TSBK */
-#define VT8500_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define VT8500_JPEGENC_BASE	0xd80ff000	/* 4k	JPEG Encoder */
-#define VT8500_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define VT8500_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define VT8500_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define VT8500_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define VT8500_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define VT8500_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define VT8500_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define VT8500_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define VT8500_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define VT8500_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define VT8500_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define VT8500_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define VT8500_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define VT8500_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define VT8500_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define VT8500_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define VT8500_PCM_BASE		0xd82d0000	/* 64k	PCM */
-#define VT8500_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define VT8500_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define VT8500_ADC_BASE		0xd8340000	/* 64k	ADC */
-
-#define VT8500_REGS_END_PHYS	0xd834ffff	/* End of MMIO registers */
-#define VT8500_REGS_LENGTH	(VT8500_REGS_END_PHYS \
-				- VT8500_REGS_START_PHYS + 1)
-
-#endif
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
deleted file mode 100644
index 6128627..0000000
--- a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* WM8505 Interrupt Sources */
-
-#define IRQ_UHCI	0	/* UHC FS (UHCI?) */
-#define IRQ_EHCI	1	/* UHC HS */
-#define IRQ_UDCDMA	2	/* UDC DMA */
-				/* Reserved */
-#define IRQ_PS2MOUSE	4	/* PS/2 Mouse */
-#define IRQ_UDC		5	/* UDC */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_KEYPAD	8	/* Keypad */
-#define IRQ_DMA		9	/* DMA Controller */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-				/* Reserved */
-				/* Reserved */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_APB		16	/* APB Bridge */
-#define IRQ_DMA0	17	/* DMA Channel 0 */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-#define IRQ_PS2KBD	23	/* PS/2 Keyboard */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_DMA1	27	/* DMA Channel 1 */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_UART5	30	/* UART 5 */
-#define IRQ_UART4	31	/* UART 4 */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_DMA2	34	/* DMA Channel 2 */
-#define IRQ_I2S		35	/* I2S */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_DMA3	40	/* DMA Channel 3 */
-#define IRQ_DMA4	41	/* DMA Channel 4 */
-#define IRQ_AC97	42	/* AC97 Interface */
-				/* Reserved */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_DMA5	45	/* DMA Channel 5 */
-#define IRQ_DMA6	46	/* DMA Channel 6 */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_DMA7	51	/* DMA Channel 7 */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_SIC0	56	/* SIC IRQ0 */
-#define IRQ_SIC1	57	/* SIC IRQ1 */
-#define IRQ_SIC2	58	/* SIC IRQ2 */
-#define IRQ_SIC3	59	/* SIC IRQ3 */
-#define IRQ_SIC4	60	/* SIC IRQ4 */
-#define IRQ_SIC5	61	/* SIC IRQ5 */
-#define IRQ_SIC6	62	/* SIC IRQ6 */
-#define IRQ_SIC7	63	/* SIC IRQ7 */
-				/* Reserved */
-#define IRQ_JPEGDEC	65	/* JPEG Decoder */
-#define IRQ_SAE		66	/* SAE (?) */
-				/* Reserved */
-#define IRQ_VPU		79	/* Video Processing Unit */
-#define IRQ_VPP		80	/* Video Post-Processor */
-#define IRQ_VID		81	/* Video Digital Input Interface */
-#define IRQ_SPU		82	/* SPU (?) */
-#define IRQ_PIP		83	/* PIP Error */
-#define IRQ_GE		84	/* Graphic Engine */
-#define IRQ_GOV		85	/* Graphic Overlay Engine */
-#define IRQ_DVO		86	/* Digital Video Output */
-				/* Reserved */
-#define IRQ_DMA8	92	/* DMA Channel 8 */
-#define IRQ_DMA9	93	/* DMA Channel 9 */
-#define IRQ_DMA10	94	/* DMA Channel 10 */
-#define IRQ_DMA11	95	/* DMA Channel 11 */
-#define IRQ_DMA12	96	/* DMA Channel 12 */
-#define IRQ_DMA13	97	/* DMA Channel 13 */
-#define IRQ_DMA14	98	/* DMA Channel 14 */
-#define IRQ_DMA15	99	/* DMA Channel 15 */
-				/* Reserved */
-#define IRQ_GOVW	111	/* GOVW (?) */
-#define IRQ_GOVRSDSCD	112	/* GOVR SDSCD (?) */
-#define IRQ_GOVRSDMIF	113	/* GOVR SDMIF (?) */
-#define IRQ_GOVRHDSCD	114	/* GOVR HDSCD (?) */
-#define IRQ_GOVRHDMIF	115	/* GOVR HDMIF (?) */
-
-#define WM8505_NR_IRQS		116
diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
deleted file mode 100644
index df15509..0000000
--- a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
-#define __ASM_ARM_ARCH_WM8505_REGS_H
-
-/* WM8505 Registers Map */
-
-#define WM8505_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define WM8505_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define WM8505_DDR_BASE		0xd8000400	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define WM8505_DMA_BASE		0xd8001800	/* 1k	DMA Controller */
-#define WM8505_VDMA_BASE	0xd8001c00	/* 1k	VDMA */
-#define WM8505_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define WM8505_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define WM8505_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define WM8505_USB_BASE		0xd8007000	/* 2k	USB 2.0 Host */
-# define WM8505_EHCI_BASE	0xd8007100	/*	EHCI */
-# define WM8505_UHCI_BASE	0xd8007301	/*	UHCI */
-#define WM8505_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define WM8505_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define WM8505_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define WM8505_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define WM8505_VPU_BASE		0xd8050000	/* 256	VPU */
-#define WM8505_GOV_BASE		0xd8050300	/* 256	GOV */
-#define WM8505_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define WM8505_GOVR_BASE	0xd8050800	/* 512	GOVR (frambuffer) */
-#define WM8505_VID_BASE		0xd8050a00	/* 256	VID */
-#define WM8505_SCL_BASE		0xd8050d00	/* 256	SCL */
-#define WM8505_VPP_BASE		0xd8050f00	/* 256	VPP */
-#define WM8505_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define WM8505_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define WM8505_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define WM8505_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define WM8505_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define WM8505_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define WM8505_SIC_BASE		0xd8150000	/* 64k	Secondary IC */
-#define WM8505_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define WM8505_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define WM8505_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define WM8505_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define WM8505_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define WM8505_KEYPAD_BASE	0xd8260000	/* 64k	Keypad control */
-#define WM8505_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define WM8505_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define WM8505_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define WM8505_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define WM8505_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define WM8505_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define WM8505_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define WM8505_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define WM8505_UART4_BASE	0xd8370000	/* 64k	UART 4 */
-#define WM8505_UART5_BASE	0xd8380000	/* 64k	UART 5 */
-
-#define WM8505_REGS_END_PHYS	0xd838ffff	/* End of MMIO registers */
-#define WM8505_REGS_LENGTH	(WM8505_REGS_END_PHYS \
-				- WM8505_REGS_START_PHYS + 1)
-
-#endif
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index 642de04..f8f9ab9 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -1,6 +1,7 @@
 /*
  *  arch/arm/mach-vt8500/irq.c
  *
+ *  Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,81 +19,102 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This file is copied and modified from the original irq.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 
 #include <asm/irq.h>
 
-#include "devices.h"
 
-#define VT8500_IC_DCTR		0x40		/* Destination control
-						register, 64*u8 */
-#define VT8500_INT_ENABLE	(1 << 3)
-#define VT8500_TRIGGER_HIGH	(0 << 4)
-#define VT8500_TRIGGER_RISING	(1 << 4)
-#define VT8500_TRIGGER_FALLING	(2 << 4)
+#define VT8500_ICPC_IRQ		0x20
+#define VT8500_ICPC_FIQ		0x24
+#define VT8500_ICDC		0x40		/* Destination Control 64*u32 */
+#define VT8500_ICIS		0x80		/* Interrupt status, 16*u32 */
+
+/* ICPC */
+#define ICPC_MASK		0x3F
+#define ICPC_ROTATE		BIT(6)
+
+/* IC_DCTR */
+#define ICDC_IRQ		0x00
+#define ICDC_FIQ		0x01
+#define ICDC_DSS0		0x02
+#define ICDC_DSS1		0x03
+#define ICDC_DSS2		0x04
+#define ICDC_DSS3		0x05
+#define ICDC_DSS4		0x06
+#define ICDC_DSS5		0x07
+
+#define VT8500_INT_DISABLE	0
+#define VT8500_INT_ENABLE	BIT(3)
+
+#define VT8500_TRIGGER_HIGH	0
+#define VT8500_TRIGGER_RISING	BIT(5)
+#define VT8500_TRIGGER_FALLING	BIT(6)
 #define VT8500_EDGE		( VT8500_TRIGGER_RISING \
 				| VT8500_TRIGGER_FALLING)
-#define VT8500_IC_STATUS	0x80		/* Interrupt status, 2*u32 */
 
-static void __iomem *ic_regbase;
-static void __iomem *sic_regbase;
+static int irq_cnt;
+
+struct vt8500_irq_priv {
+	void __iomem *base;
+};
 
 static void vt8500_irq_mask(struct irq_data *d)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 edge;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+	edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
 	if (edge) {
-		void __iomem *stat_reg = base + VT8500_IC_STATUS
-						+ (irq < 32 ? 0 : 4);
+		void __iomem *stat_reg = base + VT8500_ICIS
+						+ (d->hwirq < 32 ? 0 : 4);
 		unsigned status = readl(stat_reg);
 
-		status |= (1 << (irq & 0x1f));
+		status |= (1 << (d->hwirq & 0x1f));
 		writel(status, stat_reg);
 	} else {
-		u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+		u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
 
 		dctr &= ~VT8500_INT_ENABLE;
-		writeb(dctr, base + VT8500_IC_DCTR + irq);
+		writeb(dctr, base + VT8500_ICDC + d->hwirq);
 	}
 }
 
 static void vt8500_irq_unmask(struct irq_data *d)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 dctr;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	dctr = readb(base + VT8500_IC_DCTR + irq);
+	dctr = readb(base + VT8500_ICDC + d->hwirq);
 	dctr |= VT8500_INT_ENABLE;
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
+	writeb(dctr, base + VT8500_ICDC + d->hwirq);
 }
 
 static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
-	unsigned orig_irq = irq;
+	struct vt8500_irq_priv *priv =
+			(struct vt8500_irq_priv *)(d->domain->host_data);
+	void __iomem *base = priv->base;
 	u8 dctr;
 
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-
-	dctr = readb(base + VT8500_IC_DCTR + irq);
+	dctr = readb(base + VT8500_ICDC + d->hwirq);
 	dctr &= ~VT8500_EDGE;
 
 	switch (flow_type) {
@@ -100,18 +122,18 @@ static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
 		return -EINVAL;
 	case IRQF_TRIGGER_HIGH:
 		dctr |= VT8500_TRIGGER_HIGH;
-		__irq_set_handler_locked(orig_irq, handle_level_irq);
+		__irq_set_handler_locked(d->irq, handle_level_irq);
 		break;
 	case IRQF_TRIGGER_FALLING:
 		dctr |= VT8500_TRIGGER_FALLING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 		break;
 	case IRQF_TRIGGER_RISING:
 		dctr |= VT8500_TRIGGER_RISING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 		break;
 	}
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
+	writeb(dctr, base + VT8500_ICDC + d->hwirq);
 
 	return 0;
 }
@@ -124,57 +146,76 @@ static struct irq_chip vt8500_irq_chip = {
 	.irq_set_type = vt8500_irq_set_type,
 };
 
-void __init vt8500_init_irq(void)
+static void __init vt8500_init_irq_hw(void __iomem *base)
 {
 	unsigned int i;
 
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+	/* Enable rotating priority for IRQ */
+	writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
+	writel(0x00, base + VT8500_ICPC_FIQ);
 
-	if (ic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
+	for (i = 0; i < 64; i++) {
+		/* Disable all interrupts and route them to IRQ */
+		writeb(VT8500_INT_DISABLE | ICDC_IRQ,
+						base + VT8500_ICDC + i);
+	}
+}
 
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID);
 
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
-		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
-	}
+	return 0;
 }
 
-void __init wm8505_init_irq(void)
+static struct irq_domain_ops vt8500_irq_domain_ops = {
+	.map = vt8500_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
 {
-	unsigned int i;
+	struct irq_domain *vt8500_irq_domain;
+	struct vt8500_irq_priv *priv;
+	int irq, i;
+	struct device_node *np = node;
+
+	priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
+	priv->base = of_iomap(np, 0);
+
+	vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
+				&vt8500_irq_domain_ops, priv);
+	if (!vt8500_irq_domain)
+		pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+
+	irq_set_default_host(vt8500_irq_domain);
+
+	vt8500_init_irq_hw(priv->base);
 
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
-	sic_regbase = ioremap(wmt_sic_base, SZ_64K);
-
-	if (ic_regbase && sic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
-		writel((1 << 6), sic_regbase + 0x20);
-		writel(0, sic_regbase + 0x24);
-
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			if (i < 64)
-				writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
-			else
-				writeb(0x00, sic_regbase + VT8500_IC_DCTR
-								+ i - 64);
-
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
+	pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
+						(u32)(priv->base), irq_cnt);
+
+	/* check if this is a slaved controller */
+	if (of_irq_count(np) != 0) {
+		/* check that we have the correct number of interrupts */
+		if (of_irq_count(np) != 8) {
+			pr_err("%s: Incorrect IRQ map for slave controller\n",
+					__func__);
+			return -EINVAL;
 		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+
+		for (i = 0; i < 8; i++) {
+			irq = irq_of_parse_and_map(np, i);
+			enable_irq(irq);
+		}
+
+		pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
 	}
+
+	irq_cnt += 64;
+
+	return 0;
 }
+
diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c
deleted file mode 100644
index 497e89a..0000000
--- a/arch/arm/mach-vt8500/restart.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-vt8500/restart.c
- *
- * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <asm/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#define LEGACY_PMC_BASE		0xD8130000
-#define WMT_PRIZM_PMSR_REG	0x60
-
-static void __iomem *pmc_base;
-
-void wmt_setup_restart(void)
-{
-	struct device_node *np;
-
-	/*
-	 * Check if Power Mgmt Controller node is present in device tree. If no
-	 * device tree node, use the legacy PMSR value (valid for all current
-	 * SoCs).
-	 */
-	np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc");
-	if (np) {
-		pmc_base = of_iomap(np, 0);
-
-		if (!pmc_base)
-			pr_err("%s:of_iomap(pmc) failed\n", __func__);
-
-		of_node_put(np);
-	} else {
-		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
-		if (!pmc_base) {
-			pr_err("%s:ioremap(rstc) failed\n", __func__);
-			return;
-		}
-	}
-}
-
-void wmt_restart(char mode, const char *cmd)
-{
-	if (pmc_base)
-		writel(1, pmc_base + WMT_PRIZM_PMSR_REG);
-}
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
index d5376c5..050e183 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/arch/arm/mach-vt8500/timer.c
@@ -1,6 +1,7 @@
 /*
- *  arch/arm/mach-vt8500/timer.c
+ *  arch/arm/mach-vt8500/timer_dt.c
  *
+ *  Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,18 +19,25 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/*
+ * This file is copied and modified from the original timer.c provided by
+ * Alexey Charkov. Minor changes have been made for Device Tree Support.
+ */
+
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/delay.h>
-
 #include <asm/mach/time.h>
 
-#include "devices.h"
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #define VT8500_TIMER_OFFSET	0x0100
+#define VT8500_TIMER_HZ		3000000
 #define TIMER_MATCH_VAL		0x0000
 #define TIMER_COUNT_VAL		0x0010
 #define TIMER_STATUS_VAL	0x0014
@@ -39,7 +47,6 @@
 #define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
 #define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
 #define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
-#define VT8500_TIMER_HZ		3000000
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 
@@ -55,7 +62,7 @@ static cycle_t vt8500_timer_read(struct clocksource *cs)
 	return readl(regbase + TIMER_COUNT_VAL);
 }
 
-struct clocksource clocksource = {
+static struct clocksource clocksource = {
 	.name           = "vt8500_timer",
 	.rating         = 200,
 	.read           = vt8500_timer_read,
@@ -98,7 +105,7 @@ static void vt8500_timer_set_mode(enum clock_event_mode mode,
 	}
 }
 
-struct clock_event_device clockevent = {
+static struct clock_event_device clockevent = {
 	.name           = "vt8500_timer",
 	.features       = CLOCK_EVT_FEAT_ONESHOT,
 	.rating         = 200,
@@ -115,26 +122,51 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-struct irqaction irq = {
+static struct irqaction irq = {
 	.name    = "vt8500_timer",
 	.flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler = vt8500_timer_interrupt,
 	.dev_id  = &clockevent,
 };
 
-static void __init vt8500_timer_init(void)
+static struct of_device_id vt8500_timer_ids[] = {
+	{ .compatible = "via,vt8500-timer" },
+	{ }
+};
+
+void __init vt8500_timer_init(void)
 {
-	regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
-	if (!regbase)
-		printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+	struct device_node *np;
+	int timer_irq;
+
+	np = of_find_matching_node(NULL, vt8500_timer_ids);
+	if (!np) {
+		pr_err("%s: Timer description missing from Device Tree\n",
+								__func__);
+		return;
+	}
+	regbase = of_iomap(np, 0);
+	if (!regbase) {
+		pr_err("%s: Missing iobase description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
+	timer_irq = irq_of_parse_and_map(np, 0);
+	if (!timer_irq) {
+		pr_err("%s: Missing irq description in Device Tree\n",
+								__func__);
+		of_node_put(np);
+		return;
+	}
 
 	writel(1, regbase + TIMER_CTRL_VAL);
 	writel(0xf, regbase + TIMER_STATUS_VAL);
 	writel(~0, regbase + TIMER_MATCH_VAL);
 
 	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
-		printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
-					clocksource.name);
+		pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
+					__func__, clocksource.name);
 
 	clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
 
@@ -144,12 +176,9 @@ static void __init vt8500_timer_init(void)
 	clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
 	clockevent.cpumask = cpumask_of(0);
 
-	if (setup_irq(wmt_timer_irq, &irq))
-		printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
-					clockevent.name);
+	if (setup_irq(timer_irq, &irq))
+		pr_err("%s: setup_irq failed for %s\n", __func__,
+							clockevent.name);
 	clockevents_register_device(&clockevent);
 }
 
-struct sys_timer vt8500_timer = {
-	.init = vt8500_timer_init
-};
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
new file mode 100644
index 0000000..4494993
--- /dev/null
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -0,0 +1,196 @@
+/*
+ *  arch/arm/mach-vt8500/vt8500.c
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/restart.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+#define LEGACY_GPIO_BASE	0xD8110000
+#define LEGACY_PMC_BASE		0xD8130000
+
+/* Registers in GPIO Controller */
+#define VT8500_GPIO_MUX_REG	0x200
+
+/* Registers in Power Management Controller */
+#define VT8500_HCR_REG		0x12
+#define VT8500_PMSR_REG		0x60
+
+static void __iomem *pmc_base;
+
+void vt8500_restart(char mode, const char *cmd)
+{
+	if (pmc_base)
+		writel(1, pmc_base + VT8500_PMSR_REG);
+}
+
+static struct map_desc vt8500_io_desc[] __initdata = {
+	/* SoC MMIO registers */
+	[0] = {
+		.virtual	= 0xf8000000,
+		.pfn		= __phys_to_pfn(0xd8000000),
+		.length		= 0x00390000, /* max of all chip variants */
+		.type		= MT_DEVICE
+	},
+};
+
+void __init vt8500_map_io(void)
+{
+	iotable_init(vt8500_io_desc, ARRAY_SIZE(vt8500_io_desc));
+}
+
+static void vt8500_power_off(void)
+{
+	local_irq_disable();
+	writew(5, pmc_base + VT8500_HCR_REG);
+	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init vt8500_init(void)
+{
+	struct device_node *np, *fb;
+	void __iomem *gpio_base;
+
+#ifdef CONFIG_FB_VT8500
+	fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb");
+	if (fb) {
+		np = of_find_compatible_node(NULL, NULL, "via,vt8500-gpio");
+		if (np) {
+			gpio_base = of_iomap(np, 0);
+
+			if (!gpio_base)
+				pr_err("%s: of_iomap(gpio_mux) failed\n",
+								__func__);
+
+			of_node_put(np);
+		} else {
+			gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000);
+			if (!gpio_base)
+				pr_err("%s: ioremap(legacy_gpio_mux) failed\n",
+								__func__);
+		}
+		if (gpio_base) {
+			writel(readl(gpio_base + VT8500_GPIO_MUX_REG) | 1,
+				gpio_base + VT8500_GPIO_MUX_REG);
+			iounmap(gpio_base);
+		} else
+			pr_err("%s: Could not remap GPIO mux\n", __func__);
+
+		of_node_put(fb);
+	}
+#endif
+
+#ifdef CONFIG_FB_WM8505
+	fb = of_find_compatible_node(NULL, NULL, "wm,wm8505-fb");
+	if (fb) {
+		np = of_find_compatible_node(NULL, NULL, "wm,wm8505-gpio");
+		if (!np)
+			np = of_find_compatible_node(NULL, NULL,
+							"wm,wm8650-gpio");
+		if (np) {
+			gpio_base = of_iomap(np, 0);
+
+			if (!gpio_base)
+				pr_err("%s: of_iomap(gpio_mux) failed\n",
+								__func__);
+
+			of_node_put(np);
+		} else {
+			gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000);
+			if (!gpio_base)
+				pr_err("%s: ioremap(legacy_gpio_mux) failed\n",
+								__func__);
+		}
+		if (gpio_base) {
+			writel(readl(gpio_base + VT8500_GPIO_MUX_REG) |
+				0x80000000, gpio_base + VT8500_GPIO_MUX_REG);
+			iounmap(gpio_base);
+		} else
+			pr_err("%s: Could not remap GPIO mux\n", __func__);
+
+		of_node_put(fb);
+	}
+#endif
+
+	np = of_find_compatible_node(NULL, NULL, "via,vt8500-pmc");
+	if (np) {
+		pmc_base = of_iomap(np, 0);
+
+		if (!pmc_base)
+			pr_err("%s:of_iomap(pmc) failed\n", __func__);
+
+		of_node_put(np);
+	} else {
+		pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000);
+		if (!pmc_base)
+			pr_err("%s:ioremap(power_off) failed\n", __func__);
+	}
+	if (pmc_base)
+		pm_power_off = &vt8500_power_off;
+	else
+		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
+
+	vtwm_clk_init(pmc_base);
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const struct of_device_id vt8500_irq_match[] __initconst = {
+	{ .compatible = "via,vt8500-intc", .data = vt8500_irq_init, },
+	{ /* sentinel */ },
+};
+
+static void __init vt8500_init_irq(void)
+{
+	of_irq_init(vt8500_irq_match);
+};
+
+static struct sys_timer vt8500_timer = {
+	.init = vt8500_timer_init,
+};
+
+static const char * const vt8500_dt_compat[] = {
+	"via,vt8500",
+	"wm,wm8650",
+	"wm,wm8505",
+};
+
+DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
+	.dt_compat	= vt8500_dt_compat,
+	.map_io		= vt8500_map_io,
+	.init_irq	= vt8500_init_irq,
+	.timer		= &vt8500_timer,
+	.init_machine	= vt8500_init,
+	.restart	= vt8500_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
deleted file mode 100644
index db19886..0000000
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/wm8505_7in.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/restart.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_ehci,
-	&vt8500_device_wm8505_fb,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init wm8505_7in_init(void)
-{
-#ifdef CONFIG_FB_WM8505
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-	wmt_setup_restart();
-	wm8505_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-	.atag_offset	= 0x100,
-	.restart	= wmt_restart,
-	.reserve	= wm8505_reserve_mem,
-	.map_io		= wm8505_map_io,
-	.init_irq	= wm8505_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= wm8505_7in_init,
-MACHINE_END
-- 
1.7.9.5

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (5 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
       [not found]     ` <1345707346-9035-8-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  2012-08-23  7:35   ` [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500 Tony Prisk
                     ` (3 subsequent siblings)
  10 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Tony Prisk, Russell King, Alessandro Zummo, Alan Cox,
	Greg Kroah-Hartman, Florian Tobias Schandinat, Arnd Bergmann,
	Grant Likely, Rob Herring, Rob Landley, Linus Walleij,
	Mike Turquette, Stephen Warren,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ

Bindings for gpio, interrupt controller, power management controller,
timer, realtime clock, serial uart, ehci and uhci controllers and
framebuffer controllers used on the arch-vt8500 platform.

Framebuffer binding also specifies a 'display' node which is required
for determining the lcd panel data.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 Documentation/devicetree/bindings/arm/vt8500.txt   |   15 ++++
 .../bindings/arm/vt8500/via,vt8500-intc.txt        |   16 +++++
 .../bindings/arm/vt8500/via,vt8500-pmc.txt         |   13 ++++
 .../bindings/arm/vt8500/via,vt8500-timer.txt       |   15 ++++
 Documentation/devicetree/bindings/clock/vt8500.txt |   72 ++++++++++++++++++++
 .../devicetree/bindings/gpio/gpio-vt8500.txt       |   24 +++++++
 .../devicetree/bindings/rtc/via,vt8500-rtc.txt     |   15 ++++
 .../bindings/tty/serial/via,vt8500-uart.txt        |   17 +++++
 .../devicetree/bindings/usb/platform-uhci.txt      |   15 ++++
 .../devicetree/bindings/usb/via,vt8500-ehci.txt    |   15 ++++
 .../devicetree/bindings/vendor-prefixes.txt        |    2 +
 .../devicetree/bindings/video/via,vt8500-fb.txt    |   48 +++++++++++++
 .../devicetree/bindings/video/wm,prizm-ge-rops.txt |   13 ++++
 .../devicetree/bindings/video/wm,wm8505-fb.txt     |   22 ++++++
 14 files changed, 302 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
 create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
 create mode 100644 Documentation/devicetree/bindings/clock/vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
 create mode 100644 Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
 create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
 create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
 create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt
 create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
 create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt

diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt
new file mode 100644
index 0000000..1b3b187
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the VIA VT8500 SoC shall have the following properties:
+Required root node property:
+compatible = "via,vt8500";
+
+Boards with the Wondermedia WM8505 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8505";
+
+Boards with the Wondermedia WM8650 SoC shall have the following properties:
+Required root node property:
+compatible = "wm,wm8650";
+
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
new file mode 100644
index 0000000..0a4ce10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt
@@ -0,0 +1,16 @@
+VIA/Wondermedia VT8500 Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-intc"
+- reg : Should contain 1 register ranges(address and length)
+- #interrupt-cells : should be <1>
+
+Example:
+
+	intc: interrupt-controller@d8140000 {
+		compatible = "via,vt8500-intc";
+		interrupt-controller;
+		reg = <0xd8140000 0x10000>;
+		#interrupt-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
new file mode 100644
index 0000000..521b9c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia VT8500 Power Management Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-pmc"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+	pmc@d8130000 {
+		compatible = "via,vt8500-pmc";
+		reg = <0xd8130000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
new file mode 100644
index 0000000..901c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Timer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-timer"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : interrupt for the timer
+
+Example:
+
+	timer@d8130100 {
+		compatible = "via,vt8500-timer";
+		reg = <0xd8130100 0x28>;
+		interrupts = <36>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt
new file mode 100644
index 0000000..a880c70
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/vt8500.txt
@@ -0,0 +1,72 @@
+Device Tree Clock bindings for arch-vt8500
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock
+	"wm,wm8650-pll-clock" - for a WM8650 PLL clock
+	"via,vt8500-device-clock" - for a VT/WM device clock
+
+Required properties for PLL clocks:
+- reg : shall be the control register offset from PMC base for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+Required properties for device clocks:
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be a pll output.
+- #clock-cells : from common clock binding; shall be set to 0.
+
+
+Device Clocks
+
+Device clocks are required to have one or both of the following sets of
+properties:
+
+
+Gated device clocks:
+
+Required properties:
+- enable-reg : shall be the register offset from PMC base for the enable
+	register.
+- enable-bit : shall be the bit within enable-reg to enable/disable the clock.
+
+
+Divisor device clocks:
+
+Required property:
+- divisor-reg : shall be the register offset from PMC base for the divisor
+	register.
+Optional property:
+- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f
+	if not specified.
+
+
+For example:
+
+ref25: ref25M {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <25000000>;
+};
+
+plla: plla {
+	#clock-cells = <0>;
+	compatible = "wm,wm8650-pll-clock";
+	clocks = <&ref25>;
+	reg = <0x200>;
+};
+
+sdhc: sdhc {
+	#clock-cells = <0>;
+	compatible = "via,vt8500-device-clock";
+	clocks = <&pllb>;
+	divisor-reg = <0x328>;
+	divisor-mask = <0x3f>;
+	enable-reg = <0x254>;
+	enable-bit = <18>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
new file mode 100644
index 0000000..f4dc523
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
@@ -0,0 +1,24 @@
+VIA/Wondermedia VT8500 GPIO Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
+	or "wm,wm8650-gpio" depending on your SoC
+- reg : Should contain 1 register range (address and length)
+- #gpio-cells : should be <3>.
+	1) bank
+	2) pin number
+	3) flags - should be 0
+
+Example:
+
+	gpio: gpio-controller@d8110000 {
+		compatible = "via,vt8500-gpio";
+		gpio-controller;
+		reg = <0xd8110000 0x10000>;
+		#gpio-cells = <3>;
+	};
+
+	vibrate {
+		gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
+	};
diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
new file mode 100644
index 0000000..3c0484c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 Realtime Clock Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-rtc"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : alarm interrupt
+
+Example:
+
+	rtc@d8100000 {
+		compatible = "via,vt8500-rtc";
+		reg = <0xd8100000 0x10000>;
+		interrupts = <48>;
+	};
diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
new file mode 100644
index 0000000..5feef1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt
@@ -0,0 +1,17 @@
+VIA/Wondermedia VT8500 UART Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-uart"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UART interrupt
+- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock)
+
+Example:
+
+	uart@d8210000 {
+		compatible = "via,vt8500-uart";
+		reg = <0xd8210000 0x1040>;
+		interrupts = <47>;
+		clocks = <&ref24>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt
new file mode 100644
index 0000000..a4fb071
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt
@@ -0,0 +1,15 @@
+Generic Platform UHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "platform-uhci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
+
+Example:
+
+	uhci@d8007b00 {
+		compatible = "platform-uhci";
+		reg = <0xd8007b00 0x200>;
+		interrupts = <43>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
new file mode 100644
index 0000000..17b3ad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
@@ -0,0 +1,15 @@
+VIA/Wondermedia VT8500 EHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-ehci"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : ehci controller interrupt
+
+Example:
+
+	ehci@d8007900 {
+		compatible = "via,vt8500-ehci";
+		reg = <0xd8007900 0x200>;
+		interrupts = <43>;
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index db4d3af..5c63da2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -47,5 +47,7 @@ sirf	SiRF Technology, Inc.
 st	STMicroelectronics
 stericsson	ST-Ericsson
 ti	Texas Instruments
+via	VIA Technologies, Inc.
 wlf	Wolfson Microelectronics
+wm	Wondermedia Technologies, Inc.
 xlnx	Xilinx
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
new file mode 100644
index 0000000..98ad14c
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt
@@ -0,0 +1,48 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- via,display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+	This should be in the board dts.
+
+Example:
+
+	fb@d800e400 {
+		compatible = "via,vt8500-fb";
+		reg = <0xd800e400 0x400>;
+		interrupts = <12>;
+		via,display = <&display>;
+	};
+
+VIA VT8500 Display
+-----------------------------------------------------
+Required properties:
+- xres : lcd panel horizontal resolution
+- yres : lcd panel vertical resolution
+- left-margin,
+- right-margin,
+- hsync-len: lcd panel horizontal timings in pixels
+- upper-margin,
+- lower-margin,
+- vsync-len: lcd panel verticals timings in pixels
+- bpp: lcd panel bit-depth.
+	<16> for RGB565, <32> for RGB888
+
+Example:
+	display {
+		xres = <800>;
+		yres = <480>;
+		left-margin = <88>;
+		right-margin = <40>;
+		hsync-len = <0>;
+		upper-margin = <32>;
+		lower-margin = <11>;
+		vsync-len = <1>;
+		bpp = <16>;
+	};
diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
new file mode 100644
index 0000000..a850fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+	ge_rops@d8050400 {
+		compatible = "wm,prizm-ge-rops";
+		reg = <0xd8050400 0x100>;
+	};
diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
new file mode 100644
index 0000000..64f016a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt
@@ -0,0 +1,22 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+- via,display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+	This should be in the board dts. See definition in
+	Documentation/devicetree/bindings/video/via,vt8500-fb.txt
+
+
+Example:
+
+	fb@d8050800 {
+		compatible = "wm,wm8505-fb";
+		reg = <0xd8050800 0x200>;
+		via,display = <&display>;
+	};
+
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (6 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
       [not found]     ` <1345707346-9035-9-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
  2012-08-23  7:35   ` [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support Tony Prisk
                     ` (2 subsequent siblings)
  10 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Tony Prisk, Russell King, Alessandro Zummo, Alan Cox,
	Greg Kroah-Hartman, Florian Tobias Schandinat, Arnd Bergmann,
	Grant Likely, Rob Herring, Rob Landley, Linus Walleij,
	Mike Turquette, Stephen Warren,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ

Converted the existing arch-vt8500 gpio to a platform_device.
Added support for WM8505 and WM8650 GPIO controllers.
Replaced existing readl/writel calls with _relaxed variants.
Replaced existing unsigned variables with u32 to match register size.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/gpio/Kconfig       |    6 +
 drivers/gpio/Makefile      |    1 +
 drivers/gpio/gpio-vt8500.c |  316 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 323 insertions(+)
 create mode 100644 drivers/gpio/gpio-vt8500.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 542f0c0..3c8897a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -183,6 +183,12 @@ config GPIO_STA2X11
 	  Say yes here to support the STA2x11/ConneXt GPIO device.
 	  The GPIO module has 128 GPIO pins with alternate functions.
 
+config GPIO_VT8500
+	bool "VIA/Wondermedia SoC GPIO Support"
+	depends on ARCH_VT8500
+	help
+	  Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
+
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
 	depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 0f55662..2c014b9 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
 obj-$(CONFIG_GPIO_UCB1400)	+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_VR41XX)	+= gpio-vr41xx.o
+obj-$(CONFIG_GPIO_VT8500)	+= gpio-vt8500.o
 obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
 obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
new file mode 100644
index 0000000..bcd8e4a
--- /dev/null
+++ b/drivers/gpio/gpio-vt8500.c
@@ -0,0 +1,316 @@
+/* drivers/gpio/gpio-vt8500.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ * Based on arch/arm/mach-vt8500/gpio.c:
+ * - Copyright (C) 2010 Alexey Charkov <alchark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+
+/*
+	We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
+	by one set of registers (although not all may be valid).
+
+	Because different SoC's have different register offsets, we pass the
+	register offsets as data in vt8500_gpio_dt_ids[].
+
+	A value of NO_REG is used to indicate that this register is not
+	supported. Only used for ->en at the moment.
+*/
+
+#define NO_REG	0xFFFF
+
+/*
+ * struct vt8500_gpio_bank_regoffsets
+ * @en: offset to enable register of the bank
+ * @dir: offset to direction register of the bank
+ * @data_out: offset to the data out register of the bank
+ * @data_in: offset to the data in register of the bank
+ * @ngpio: highest valid pin in this bank
+ */
+
+struct vt8500_gpio_bank_regoffsets {
+	unsigned int	en;
+	unsigned int	dir;
+	unsigned int	data_out;
+	unsigned int	data_in;
+	unsigned char	ngpio;
+};
+
+struct vt8500_gpio_data {
+	unsigned int				num_banks;
+	struct vt8500_gpio_bank_regoffsets	banks[];
+};
+
+#define VT8500_BANK(__en, __dir, __out, __in, __ngpio)		\
+{								\
+	.en = __en,						\
+	.dir = __dir,						\
+	.data_out = __out,					\
+	.data_in = __in,					\
+	.ngpio = __ngpio,					\
+}
+
+static struct vt8500_gpio_data vt8500_data = {
+	.num_banks	= 7,
+	.banks	= {
+		VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
+		VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
+		VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
+		VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
+		VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
+		VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
+		VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
+	},
+};
+
+static struct vt8500_gpio_data wm8505_data = {
+	.num_banks	= 10,
+	.banks	= {
+		VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
+		VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
+		VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
+		VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
+		VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
+		VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
+		VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
+		VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
+		VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
+		VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
+	},
+};
+
+/*
+ * No information about which bits are valid so we just make
+ * them all available until its figured out.
+ */
+static struct vt8500_gpio_data wm8650_data = {
+	.num_banks	= 9,
+	.banks	= {
+		VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
+		VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
+		VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
+		VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
+		VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
+		VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
+		VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
+		VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
+		VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
+	},
+};
+
+struct vt8500_gpio_chip {
+	struct gpio_chip		chip;
+
+	const struct vt8500_gpio_bank_regoffsets *regs;
+	void __iomem	*base;
+};
+
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	u32 val;
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	if (vt8500_chip->regs->en == NO_REG)
+		return 0;
+
+	val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
+	val |= BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
+
+	return 0;
+}
+
+static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+	u32 val;
+
+	if (vt8500_chip->regs->en == NO_REG)
+		return;
+
+	val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
+	val &= ~BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
+}
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
+	val &= ~BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
+
+	return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+								int value)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
+	val |= BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
+
+	if (value) {
+		val = readl_relaxed(vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+		val |= BIT(offset);
+		writel_relaxed(val, vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+	}
+	return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
+								offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+								int value)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+	if (value)
+		val |= BIT(offset);
+	else
+		val &= ~BIT(offset);
+
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
+}
+
+static int vt8500_of_xlate(struct gpio_chip *gc,
+			    const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	/* bank if specificed in gpiospec->args[0] */
+	if (flags)
+		*flags = gpiospec->args[2];
+
+	return gpiospec->args[1];
+}
+
+static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
+				const struct vt8500_gpio_data *data)
+{
+	struct vt8500_gpio_chip *vtchip;
+	struct gpio_chip *chip;
+	int i;
+	int pin_cnt = 0;
+
+	vtchip = devm_kzalloc(&pdev->dev,
+			sizeof(struct vt8500_gpio_chip) * data->num_banks,
+			GFP_KERNEL);
+	if (!vtchip) {
+		pr_err("%s: failed to allocate chip memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < data->num_banks; i++) {
+		vtchip[i].base = base;
+		vtchip[i].regs = &data->banks[i];
+
+		chip = &vtchip[i].chip;
+
+		chip->of_xlate = vt8500_of_xlate;
+		chip->of_gpio_n_cells = 3;
+		chip->of_node = pdev->dev.of_node;
+
+		chip->request = vt8500_gpio_request;
+		chip->free = vt8500_gpio_free;
+		chip->direction_input = vt8500_gpio_direction_input;
+		chip->direction_output = vt8500_gpio_direction_output;
+		chip->get = vt8500_gpio_get_value;
+		chip->set = vt8500_gpio_set_value;
+		chip->can_sleep = 0;
+		chip->base = pin_cnt;
+		chip->ngpio = data->banks[i].ngpio;
+
+		pin_cnt += data->banks[i].ngpio;
+
+		gpiochip_add(chip);
+	}
+	return 0;
+}
+
+static struct of_device_id vt8500_gpio_dt_ids[] = {
+	{ .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
+	{ .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
+	{ .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
+	{ /* Sentinel */ },
+};
+
+static int __devinit vt8500_gpio_probe(struct platform_device *pdev)
+{
+	void __iomem *gpio_base;
+	struct device_node *np;
+	const struct of_device_id *of_id =
+				of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id) {
+		dev_err(&pdev->dev, "Failed to find gpio controller\n");
+		return -ENODEV;
+	}
+
+	np = pdev->dev.of_node;
+	if (!np) {
+		dev_err(&pdev->dev, "Missing GPIO description in devicetree\n");
+		return -EFAULT;
+	}
+
+	gpio_base = of_iomap(np, 0);
+	if (!gpio_base) {
+		dev_err(&pdev->dev, "Unable to map GPIO registers\n");
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	vt8500_add_chips(pdev, gpio_base, of_id->data);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_gpio_driver = {
+	.probe		= vt8500_gpio_probe,
+	.driver		= {
+		.name	= "vt8500-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_gpio_dt_ids,
+	},
+};
+
+module_platform_driver(vt8500_gpio_driver);
+
+MODULE_DESCRIPTION("VT8500 GPIO Driver");
+MODULE_AUTHOR("Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (7 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500 Tony Prisk
@ 2012-08-23  7:35   ` Tony Prisk
  2012-08-23 10:40   ` [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree *** Arnd Bergmann
  2012-08-25  3:32   ` Stephen Warren
  10 siblings, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-23  7:35 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: Tony Prisk, Russell King, Alessandro Zummo, Alan Cox,
	Greg Kroah-Hartman, Florian Tobias Schandinat, Arnd Bergmann,
	Grant Likely, Rob Herring, Rob Landley, Linus Walleij,
	Mike Turquette, Stephen Warren,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ

This patch adds common clock framework support for arch-vt8500.
Support for PLL and device clocks on VT8500, WM8505 and WM8650
are included.

Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
---
 drivers/clk/Makefile     |    1 +
 drivers/clk/clk-vt8500.c |  511 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 512 insertions(+)
 create mode 100644 drivers/clk/clk-vt8500.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5869ea3..42fb173 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SOCFPGA)	+= socfpga/
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/
 obj-$(CONFIG_ARCH_U300)		+= clk-u300.o
 obj-$(CONFIG_ARCH_INTEGRATOR)	+= versatile/
+obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
new file mode 100644
index 0000000..2f7c77d
--- /dev/null
+++ b/drivers/clk/clk-vt8500.c
@@ -0,0 +1,511 @@
+/* drivers/clk/clk-vt8500.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+/* All clocks share the same lock as none can be changed concurrently */
+static DEFINE_SPINLOCK(_lock);
+
+struct clk_device {
+	struct clk_hw	hw;
+	void __iomem	*div_reg;
+	unsigned int	div_mask;
+	void __iomem	*en_reg;
+	int		en_bit;
+	spinlock_t	*lock;
+};
+
+/*
+ * Add new PLL_TYPE_x definitions here as required. Use the first known model
+ * to support the new type as the name.
+ * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and
+ * vtwm_pll_set_rate() to handle the new PLL_TYPE_x
+ */
+
+#define PLL_TYPE_VT8500		0
+#define PLL_TYPE_WM8650		1
+
+struct clk_pll {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	spinlock_t	*lock;
+	int		type;
+};
+
+static void __iomem *pmc_base;
+
+#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
+
+
+#define VT8500_PMC_BUSY_MASK		0x18
+
+static void vt8500_pmc_wait_busy(void)
+{
+	while (readl(pmc_base) & VT8500_PMC_BUSY_MASK)
+		cpu_relax();
+}
+
+static void vt8500_dclk_endisable(struct clk_hw *hw, int enable)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 en_val;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	en_val = readl(cdev->en_reg);
+
+	if (enable)
+		en_val |= BIT(cdev->en_bit);
+	else
+		en_val &= ~BIT(cdev->en_bit);
+
+	writel(en_val, cdev->en_reg);
+
+	spin_unlock_irqrestore(cdev->lock, flags);
+}
+
+static int vt8500_dclk_enable(struct clk_hw *hw)
+{
+	vt8500_dclk_endisable(hw, 1);
+	return 0;
+}
+
+static void vt8500_dclk_disable(struct clk_hw *hw)
+{
+	vt8500_dclk_endisable(hw, 0);
+}
+
+static int vt8500_dclk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit));
+
+	return en_val ? 1 : 0;
+}
+
+static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 div = readl(cdev->div_reg) & cdev->div_mask;
+
+	/* Special case for SDMMC devices */
+	if ((cdev->div_mask == 0x3F) && (div & BIT(5)))
+		div = 64 * (div & 0x1f);
+
+	/* div == 0 is actually the highest divisor */
+	if (div == 0)
+		div = (cdev->div_mask + 1);
+
+	return parent_rate / div;
+}
+
+static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	u32 divisor = rate / *prate;
+
+	return *prate / divisor;
+}
+
+static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 divisor = rate / parent_rate;
+	unsigned long flags = 0;
+
+	if (divisor == cdev->div_mask + 1)
+		divisor = 0;
+
+	if (divisor > cdev->div_mask) {
+		pr_err("%s: invalid divisor for clock\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	vt8500_pmc_wait_busy();
+	writel(divisor, cdev->div_reg);
+	vt8500_pmc_wait_busy();
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	return 0;
+}
+
+
+static const struct clk_ops vt8500_gated_clk_ops = {
+	.enable = vt8500_dclk_enable,
+	.disable = vt8500_dclk_disable,
+	.is_enabled = vt8500_dclk_is_enabled,
+};
+
+static const struct clk_ops vt8500_divisor_clk_ops = {
+	.round_rate = vt8500_dclk_round_rate,
+	.set_rate = vt8500_dclk_set_rate,
+	.recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+static const struct clk_ops vt8500_gated_divisor_clk_ops = {
+	.enable = vt8500_dclk_enable,
+	.disable = vt8500_dclk_disable,
+	.is_enabled = vt8500_dclk_is_enabled,
+	.round_rate = vt8500_dclk_round_rate,
+	.set_rate = vt8500_dclk_set_rate,
+	.recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+#define CLK_INIT_GATED			BIT(0)
+#define CLK_INIT_DIVISOR		BIT(1)
+#define CLK_INIT_GATED_DIVISOR		(CLK_INIT_DIVISOR | CLK_INIT_GATED)
+
+static __init void vtwm_device_clk_init(struct device_node *node)
+{
+	u32 en_reg, div_reg;
+	struct clk *clk;
+	struct clk_device *dev_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+	int clk_init_flags = 0;
+
+	dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
+	if (WARN_ON(!dev_clk))
+		return;
+
+	dev_clk->lock = &_lock;
+
+	rc = of_property_read_u32(node, "enable-reg", &en_reg);
+	if (!rc) {
+		dev_clk->en_reg = pmc_base + en_reg;
+		rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit);
+		if (rc) {
+			pr_err("%s: enable-bit property required for gated clock\n",
+								__func__);
+			return;
+		}
+		clk_init_flags |= CLK_INIT_GATED;
+	}
+
+	rc = of_property_read_u32(node, "divisor-reg", &div_reg);
+	if (!rc) {
+		dev_clk->div_reg = pmc_base + div_reg;
+		/*
+		 * use 0x1f as the default mask since it covers
+		 * almost all the clocks and reduces dts properties
+		 */
+		dev_clk->div_mask = 0x1f;
+
+		of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask);
+		clk_init_flags |= CLK_INIT_DIVISOR;
+	}
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	switch (clk_init_flags) {
+	case CLK_INIT_GATED:
+		init.ops = &vt8500_gated_clk_ops;
+		break;
+	case CLK_INIT_DIVISOR:
+		init.ops = &vt8500_divisor_clk_ops;
+		break;
+	case CLK_INIT_GATED_DIVISOR:
+		init.ops = &vt8500_gated_divisor_clk_ops;
+		break;
+	default:
+		pr_err("%s: Invalid clock description in device tree\n",
+								__func__);
+		kfree(dev_clk);
+		return;
+	}
+
+	init.name = clk_name;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	dev_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &dev_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(dev_clk);
+		return;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* PLL clock related functions */
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Helper macros for PLL_VT8500 */
+#define VT8500_PLL_MUL(x)	((x & 0x1F) << 1)
+#define VT8500_PLL_DIV(x)	((x & 0x100) ? 1 : 2)
+
+#define VT8500_BITS_TO_FREQ(r, m, d)					\
+				((r / d) * m)
+
+#define VT8500_BITS_TO_VAL(m, d)					\
+				((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F))
+
+/* Helper macros for PLL_WM8650 */
+#define WM8650_PLL_MUL(x)	(x & 0x3FF)
+#define WM8650_PLL_DIV(x)	(((x >> 10) & 7) * (1 << ((x >> 13) & 3)))
+
+#define WM8650_BITS_TO_FREQ(r, m, d1, d2)				\
+				(r * m / (d1 * (1 << d2)))
+
+#define WM8650_BITS_TO_VAL(m, d1, d2)					\
+				((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+
+
+static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+				u32 *multiplier, u32 *prediv)
+{
+	unsigned long tclk;
+
+	/* sanity check */
+	if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) {
+		pr_err("%s: requested rate out of range\n", __func__);
+		*multiplier = 0;
+		*prediv = 1;
+		return;
+	}
+	if (rate <= parent_rate * 31)
+		/* use the prediv to double the resolution */
+		*prediv = 2;
+	else
+		*prediv = 1;
+
+	*multiplier = rate / (parent_rate / *prediv);
+	tclk = (parent_rate / *prediv) * *multiplier;
+
+	if (tclk != rate)
+		pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,
+								rate, tclk);
+}
+
+static void wm8650_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+				u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+	u32 mul, div1, div2;
+	u32 best_mul, best_div1, best_div2;
+	unsigned long tclk, rate_err, best_err;
+
+	best_err = (unsigned long)-1;
+
+	/* Find the closest match (lower or equal to requested) */
+	for (div1 = 5; div1 >= 3; div1--)
+		for (div2 = 3; div2 >= 0; div2--)
+			for (mul = 3; mul <= 1023; mul++) {
+				tclk = parent_rate * mul / (div1 * (1 << div2));
+				if (tclk > rate)
+					continue;
+				/* error will always be +ve */
+				rate_err = rate - tclk;
+				if (rate_err == 0) {
+					*multiplier = mul;
+					*divisor1 = div1;
+					*divisor2 = div2;
+					return;
+				}
+
+				if (rate_err < best_err) {
+					best_err = rate_err;
+					best_mul = mul;
+					best_div1 = div1;
+					best_div2 = div2;
+				}
+			}
+
+	/* if we got here, it wasn't an exact match */
+	pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+							rate - best_err);
+	*multiplier = mul;
+	*divisor1 = div1;
+	*divisor2 = div2;
+}
+
+static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 mul, div1, div2;
+	u32 pll_val;
+	unsigned long flags = 0;
+
+	/* sanity check */
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		vt8500_find_pll_bits(rate, parent_rate, &mul, &div1);
+		pll_val = VT8500_BITS_TO_VAL(mul, div1);
+		break;
+	case PLL_TYPE_WM8650:
+		wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+		pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
+		break;
+	default:
+		pr_err("%s: invalid pll type\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(pll->lock, flags);
+
+	vt8500_pmc_wait_busy();
+	writel(pll_val, pll->reg);
+	vt8500_pmc_wait_busy();
+
+	spin_unlock_irqrestore(pll->lock, flags);
+
+	return 0;
+}
+
+static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 mul, div1, div2;
+	long round_rate;
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		vt8500_find_pll_bits(rate, *prate, &mul, &div1);
+		round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1);
+		break;
+	case PLL_TYPE_WM8650:
+		wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+		round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
+		break;
+	default:
+		round_rate = 0;
+	}
+
+	return round_rate;
+}
+
+static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 pll_val = readl(pll->reg);
+	unsigned long pll_freq;
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		pll_freq = parent_rate * VT8500_PLL_MUL(pll_val);
+		pll_freq /= VT8500_PLL_DIV(pll_val);
+		break;
+	case PLL_TYPE_WM8650:
+		pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
+		pll_freq /= WM8650_PLL_DIV(pll_val);
+		break;
+	default:
+		pll_freq = 0;
+	}
+
+	return pll_freq;
+}
+
+const struct clk_ops vtwm_pll_ops = {
+	.round_rate = vtwm_pll_round_rate,
+	.set_rate = vtwm_pll_set_rate,
+	.recalc_rate = vtwm_pll_recalc_rate,
+};
+
+static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
+{
+	u32 reg;
+	struct clk *clk;
+	struct clk_pll *pll_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+
+	rc = of_property_read_u32(node, "reg", &reg);
+	if (WARN_ON(rc))
+		return;
+
+	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+	if (WARN_ON(!pll_clk))
+		return;
+
+	pll_clk->reg = pmc_base + reg;
+	pll_clk->lock = &_lock;
+	pll_clk->type = pll_type;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	init.name = clk_name;
+	init.ops = &vtwm_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &pll_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(pll_clk);
+		return;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* Wrappers for initialization functions */
+
+static void __init vt8500_pll_init(struct device_node *node)
+{
+	vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
+}
+
+static void __init wm8650_pll_init(struct device_node *node)
+{
+	vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, },
+	{ .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, },
+	{ .compatible = "via,vt8500-device-clock",
+					.data = vtwm_device_clk_init, },
+	{ /* sentinel */ }
+};
+
+void __init vtwm_clk_init(void __iomem *base)
+{
+	if (!base)
+		return;
+
+	pmc_base = base;
+
+	of_clk_init(clk_match);
+}
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (8 preceding siblings ...)
  2012-08-23  7:35   ` [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support Tony Prisk
@ 2012-08-23 10:40   ` Arnd Bergmann
       [not found]     ` <201208231040.16702.arnd-r2nGTMty4D4@public.gmane.org>
  2012-08-25  3:32   ` Stephen Warren
  10 siblings, 1 reply; 24+ messages in thread
From: Arnd Bergmann @ 2012-08-23 10:40 UTC (permalink / raw)
  To: Tony Prisk
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	Florian Tobias Schandinat, Greg Kroah-Hartman,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

On Thursday 23 August 2012, Tony Prisk wrote:
> Patchset based on Arnd's arm-soc/for-next branch.
> 
> 
> Could I get this reviewed, hopefully for inclusion into v3.7.

I can take them into the arm-soc tree if there are no new comments.
For the last two patches, you need to get an Acked-by comment from the
gpio and clk maintainers, respectively, or you should send them
the patches for inclusion in those subsystem trees.

	Arnd

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
  2012-08-23  7:35   ` [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial Tony Prisk
@ 2012-08-23 10:53     ` Alan Cox
  0 siblings, 0 replies; 24+ messages in thread
From: Alan Cox @ 2012-08-23 10:53 UTC (permalink / raw)
  To: Tony Prisk
  Cc: vt8500-wm8505-linux-kernel, Russell King, Alessandro Zummo,
	Greg Kroah-Hartman, Florian Tobias Schandinat, Arnd Bergmann,
	Grant Likely, Rob Herring, Rob Landley, Linus Walleij,
	Mike Turquette, Stephen Warren, linux-arm-kernel, linux-kernel,
	linux-fbdev, linux-usb, linux-serial, rtc-linux,
	devicetree-discuss

On Thu, 23 Aug 2012 19:35:39 +1200
Tony Prisk <linux@prisktech.co.nz> wrote:

> Increase vt8500_max_ports to 6 as the WM8505 as 6 available uarts.
> Use devicetree port id as primary addressing for ports but allow
> auto-allocation if id not specified.

Acked-by: Alan Cox <alan@linux.intel.com>

for the serial bits

^ permalink raw reply	[flat|nested] 24+ messages in thread

* RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]     ` <201208231040.16702.arnd-r2nGTMty4D4@public.gmane.org>
@ 2012-08-23 12:58       ` Tony Prisk
       [not found]         ` <76F764B079F92A4E843589C893D0A022DAF68C14-A1+cU8XkcJSYgi1/3OOQJ8krCUz0bFs7@public.gmane.org>
  0 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23 12:58 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	Florian Tobias Schandinat, Greg Kroah-Hartman,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org

>On Thursday 23 August 2012, Tony Prisk wrote:
>> Patchset based on Arnd's arm-soc/for-next branch.
>>
>>
>> Could I get this reviewed, hopefully for inclusion into v3.7.

>I can take them into the arm-soc tree if there are no new comments.
>For the last two patches, you need to get an Acked-by comment from the
>gpio and clk maintainers, respectively, or you should send them
>the patches for inclusion in those subsystem trees.

>        Arnd


Linus W has provided some feedback on the gpio driver - I missed the
issues he raised the first time around so just waiting for him to take a look
at v4 when he's got time.

I haven't heard from Mike T in regards to the new clock code - He did
reply about the original patch (pre-devicetree) but I asked him to hold off
reviewing it because it was going to be rewritten.

EHCI/UHCI has gone to -next (on patchv2) via usb-next
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
There haven't been any changes to it in v3/v4.

GPIO going via another tree isn't really an issue if necessary.

Without the clock patch (9/9), the mach-vt8500 patch (6/9) won't compile
due to unresolved symbols.

In arch/arm/mach-vt8500/vt8500.c - you will get an unresolved symbol
for 'vtwm_clk_init'

Not sure if this matters, thought I should point it out.
Does it need to compile cleanly in your tree (which is what I would assume),
or just once its all combined in -next?
Does it matter that the usb patches are already in -next?

I don't really understand the requirements around submitting to individual
trees and which (if any) of these points are actually issues.

Regards

Tony Prisk

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]         ` <76F764B079F92A4E843589C893D0A022DAF68C14-A1+cU8XkcJSYgi1/3OOQJ8krCUz0bFs7@public.gmane.org>
@ 2012-08-23 13:22           ` Arnd Bergmann
       [not found]             ` <201208231322.23077.arnd-r2nGTMty4D4@public.gmane.org>
  2012-08-23 13:34           ` [rtc-linux] " Linus Walleij
  1 sibling, 1 reply; 24+ messages in thread
From: Arnd Bergmann @ 2012-08-23 13:22 UTC (permalink / raw)
  To: Tony Prisk
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, rtc-linux-/JYPxA39Uh5TLH3MbocFFw,
	Florian Tobias Schandinat, Greg Kroah-Hartman,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org

On Thursday 23 August 2012, Tony Prisk wrote:
> >On Thursday 23 August 2012, Tony Prisk wrote:

> 
> Without the clock patch (9/9), the mach-vt8500 patch (6/9) won't compile
> due to unresolved symbols.
> 
> In arch/arm/mach-vt8500/vt8500.c - you will get an unresolved symbol
> for 'vtwm_clk_init'
> 
> Not sure if this matters, thought I should point it out.
> Does it need to compile cleanly in your tree (which is what I would assume),
> or just once its all combined in -next?
> Does it matter that the usb patches are already in -next?
> 
> I don't really understand the requirements around submitting to individual
> trees and which (if any) of these points are actually issues.

The rule is that each changeset should be free of regressions compared
to the version before. So if you have a set of 7 patches in one branch
that you want me to pick up, the result after applying those 7 patches
should work, and each previous step should also work. You cannot for
instance add a call to a function in one patch and then provide that
function in the following patch.

There are multiple ways to achieve this:

* when you have dependencies, get everything merged through one
maintainer tree, and get Acks for each patch that belongs to another
maintainer.

* submit a branch with the patches that other stuff depends on to
both the subsystem maintainer who is responsible for it and to
the subsystem maintainer who gets the other patches that are built
on top of this branch. If you do this, you have to make sure that
the first branch never gets rebased and that the second branch is
not sent before the first one is upstream.

* change the code so that no dependencies exist, e.g. by introducing
a dummy implementation in one patch and the proper one in another.
This can generate merge conflicts, but that's usually ok.

	Arnd

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
       [not found]     ` <1345707346-9035-9-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
@ 2012-08-23 13:31       ` Linus Walleij
  0 siblings, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2012-08-23 13:31 UTC (permalink / raw)
  To: Tony Prisk
  Cc: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw, Russell King,
	Alessandro Zummo, Alan Cox, Greg Kroah-Hartman,
	Florian Tobias Schandinat, Arnd Bergmann, Grant Likely,
	Rob Herring, Rob Landley, Linus Walleij, Mike Turquette,
	Stephen Warren,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ

On Thu, Aug 23, 2012 at 9:35 AM, Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org> wrote:

> Converted the existing arch-vt8500 gpio to a platform_device.
> Added support for WM8505 and WM8650 GPIO controllers.
> Replaced existing readl/writel calls with _relaxed variants.
> Replaced existing unsigned variables with u32 to match register size.
>
> Signed-off-by: Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>

Sweet!
Reviewed-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]         ` <76F764B079F92A4E843589C893D0A022DAF68C14-A1+cU8XkcJSYgi1/3OOQJ8krCUz0bFs7@public.gmane.org>
  2012-08-23 13:22           ` Arnd Bergmann
@ 2012-08-23 13:34           ` Linus Walleij
  1 sibling, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2012-08-23 13:34 UTC (permalink / raw)
  To: Tony Prisk
  Cc: Arnd Bergmann, vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Russell King, Alessandro Zummo, Alan Cox, Greg Kroah-Hartman,
	Florian Tobias Schandinat, Grant Likely, Rob Herring,
	Rob Landley, Linus Walleij, Mike Turquette, Stephen Warren,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org

On Thu, Aug 23, 2012 at 2:58 PM, Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org> wrote:

> Linus W has provided some feedback on the gpio driver - I missed the
> issues he raised the first time around so just waiting for him to take a look
> at v4 when he's got time.

Reviewed and OK:ed, looking good now.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]             ` <201208231322.23077.arnd-r2nGTMty4D4@public.gmane.org>
@ 2012-08-23 21:48               ` Tony Prisk
  2012-08-24  5:40                 ` Arnd Bergmann
  0 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-23 21:48 UTC (permalink / raw)
  To: arnd-r2nGTMty4D4
  Cc: a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, FlorianSchandinat-Mmb7MZpHnFY,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	swarren-DDmLM1+adcrQT0dZR+AlfA,
	mturquette-l0cyMroinI0@public.gmane.org

On Thu, 2012-08-23 at 13:22 +0000, Arnd Bergmann wrote:
> On Thursday 23 August 2012, Tony Prisk wrote:
> > >On Thursday 23 August 2012, Tony Prisk wrote:
> 
> > 
> > Without the clock patch (9/9), the mach-vt8500 patch (6/9) won't compile
> > due to unresolved symbols.
> > 
> > In arch/arm/mach-vt8500/vt8500.c - you will get an unresolved symbol
> > for 'vtwm_clk_init'
> > 
> > Not sure if this matters, thought I should point it out.
> > Does it need to compile cleanly in your tree (which is what I would assume),
> > or just once its all combined in -next?
> > Does it matter that the usb patches are already in -next?
> > 
> > I don't really understand the requirements around submitting to individual
> > trees and which (if any) of these points are actually issues.
> 
> The rule is that each changeset should be free of regressions compared
> to the version before. So if you have a set of 7 patches in one branch
> that you want me to pick up, the result after applying those 7 patches
> should work, and each previous step should also work. You cannot for
> instance add a call to a function in one patch and then provide that
> function in the following patch.
> 
> There are multiple ways to achieve this:
> 
> * when you have dependencies, get everything merged through one
> maintainer tree, and get Acks for each patch that belongs to another
> maintainer.
> 
> * submit a branch with the patches that other stuff depends on to
> both the subsystem maintainer who is responsible for it and to
> the subsystem maintainer who gets the other patches that are built
> on top of this branch. If you do this, you have to make sure that
> the first branch never gets rebased and that the second branch is
> not sent before the first one is upstream.
> 
> * change the code so that no dependencies exist, e.g. by introducing
> a dummy implementation in one patch and the proper one in another.
> This can generate merge conflicts, but that's usually ok.
> 
> 	Arnd
> 

I was about to say that if Mike has any issues with the driver that I
can fix the patch conflict at the same time, but I just realised that
its more work than I originally thought :)

I was going to move the arch-vt8500 part of the clocks patch back into
the clocks patch - but that will just move the issue from arm-soc to
clocks because Mike's branch won't have the arch-vt8500 patch so the
patch will fail.

If Mike is OK with it once the clocks driver is reviewed, it will be a
lot easier for the whole lot to go in via arm-soc, otherwise I can try
figuring out how to get the arch-vt8500 patch to Mike first, and then
the clocks patch.


Regards
Tony Prisk

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  2012-08-23 21:48               ` Tony Prisk
@ 2012-08-24  5:40                 ` Arnd Bergmann
       [not found]                   ` <201208240540.12316.arnd-r2nGTMty4D4@public.gmane.org>
  0 siblings, 1 reply; 24+ messages in thread
From: Arnd Bergmann @ 2012-08-24  5:40 UTC (permalink / raw)
  To: Tony Prisk
  Cc: a.zummo, linux-fbdev, linux, linus.walleij, rtc-linux,
	FlorianSchandinat, gregkh, devicetree-discuss, linux-usb,
	linux-kernel, rob.herring, grant.likely, rob, linux-serial,
	vt8500-wm8505-linux-kernel@googlegroups.com

On Thursday 23 August 2012, Tony Prisk wrote:
> I was about to say that if Mike has any issues with the driver that I
> can fix the patch conflict at the same time, but I just realised that
> its more work than I originally thought :)
> 
> I was going to move the arch-vt8500 part of the clocks patch back into
> the clocks patch - but that will just move the issue from arm-soc to
> clocks because Mike's branch won't have the arch-vt8500 patch so the
> patch will fail.

But that's ok, because without the arch-v8500 part, nothing uses
the vt8500-clock driver, so nothing breaks. You can introduce broken
code in the meantime as long as it's impossible to enable and it will
work afterwards.

	Arnd

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]                   ` <201208240540.12316.arnd-r2nGTMty4D4@public.gmane.org>
@ 2012-08-24  5:52                     ` Tony Prisk
  2012-08-24  5:54                       ` Alexey Charkov
  0 siblings, 1 reply; 24+ messages in thread
From: Tony Prisk @ 2012-08-24  5:52 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw
  Cc: a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, FlorianSchandinat-Mmb7MZpHnFY,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	swarren-DDmLM1+adcrQT0dZR+AlfA, mturquette-l0cyMroinI0,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, alan

On Fri, 2012-08-24 at 05:40 +0000, Arnd Bergmann wrote:
> On Thursday 23 August 2012, Tony Prisk wrote:
> > I was about to say that if Mike has any issues with the driver that I
> > can fix the patch conflict at the same time, but I just realised that
> > its more work than I originally thought :)
> > 
> > I was going to move the arch-vt8500 part of the clocks patch back into
> > the clocks patch - but that will just move the issue from arm-soc to
> > clocks because Mike's branch won't have the arch-vt8500 patch so the
> > patch will fail.
> 
> But that's ok, because without the arch-v8500 part, nothing uses
> the vt8500-clock driver, so nothing breaks. You can introduce broken
> code in the meantime as long as it's impossible to enable and it will
> work afterwards.
> 
> 	Arnd

You lost me a little bit there :)
If it stays as is now, the arch-vt8500 patch will introduce an
unresolved symbol.
If I move the clock code from the arch-vt8500 patch to the clock patch,
then the clock patch won't apply because it needs the arch-vt8500 patch
first and Mike won't have that patch, but it would be fine if both
patches went in via your tree.

Or are you saying to apply the clock patch as is before the arch-vt8500
patch?

Tony P

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
  2012-08-24  5:52                     ` Tony Prisk
@ 2012-08-24  5:54                       ` Alexey Charkov
       [not found]                         ` <CABjd4Yxxf5XDc6gs0WABZgF3SOd89J7CfjsU9uitOg4qpQ4WEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
  0 siblings, 1 reply; 24+ messages in thread
From: Alexey Charkov @ 2012-08-24  5:54 UTC (permalink / raw)
  To: vt8500-wm8505-linux-kernel
  Cc: a.zummo, linux-fbdev, linux, linus.walleij, rtc-linux,
	FlorianSchandinat, gregkh, devicetree-discuss, linux-usb,
	linux-kernel, rob.herring, grant.likely, rob, linux-serial,
	swarren, mturquette@ti.com

2012/8/24 Tony Prisk <linux@prisktech.co.nz>:
> On Fri, 2012-08-24 at 05:40 +0000, Arnd Bergmann wrote:
>> On Thursday 23 August 2012, Tony Prisk wrote:
>> > I was about to say that if Mike has any issues with the driver that I
>> > can fix the patch conflict at the same time, but I just realised that
>> > its more work than I originally thought :)
>> >
>> > I was going to move the arch-vt8500 part of the clocks patch back into
>> > the clocks patch - but that will just move the issue from arm-soc to
>> > clocks because Mike's branch won't have the arch-vt8500 patch so the
>> > patch will fail.
>>
>> But that's ok, because without the arch-v8500 part, nothing uses
>> the vt8500-clock driver, so nothing breaks. You can introduce broken
>> code in the meantime as long as it's impossible to enable and it will
>> work afterwards.
>>
>>       Arnd
>
> You lost me a little bit there :)
> If it stays as is now, the arch-vt8500 patch will introduce an
> unresolved symbol.
> If I move the clock code from the arch-vt8500 patch to the clock patch,
> then the clock patch won't apply because it needs the arch-vt8500 patch
> first and Mike won't have that patch, but it would be fine if both
> patches went in via your tree.

Why don't you add a #define in the first patch that makes your
to-be-unresolved symbol a no-op and then drop it within the clock
patch?

Best,
Alexey

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]                         ` <CABjd4Yxxf5XDc6gs0WABZgF3SOd89J7CfjsU9uitOg4qpQ4WEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2012-08-24  7:14                           ` Tony Prisk
  2012-08-24  7:18                           ` Tony Prisk
  1 sibling, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-24  7:14 UTC (permalink / raw)
  To: Alexey Charkov
  Cc: a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, FlorianSchandinat-Mmb7MZpHnFY,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	swarren-DDmLM1+adcrQT0dZR+AlfA, alan-VuQAYsv1563Yd54FQh9/CA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

On Fri, 2012-08-24 at 09:54 +0400, Alexey Charkov wrote:
> 2012/8/24 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>:
> > On Fri, 2012-08-24 at 05:40 +0000, Arnd Bergmann wrote:
> >> On Thursday 23 August 2012, Tony Prisk wrote:
> >> > I was about to say that if Mike has any issues with the driver that I
> >> > can fix the patch conflict at the same time, but I just realised that
> >> > its more work than I originally thought :)
> >> >
> >> > I was going to move the arch-vt8500 part of the clocks patch back into
> >> > the clocks patch - but that will just move the issue from arm-soc to
> >> > clocks because Mike's branch won't have the arch-vt8500 patch so the
> >> > patch will fail.
> >>
> >> But that's ok, because without the arch-v8500 part, nothing uses
> >> the vt8500-clock driver, so nothing breaks. You can introduce broken
> >> code in the meantime as long as it's impossible to enable and it will
> >> work afterwards.
> >>
> >>       Arnd
> >
> > You lost me a little bit there :)
> > If it stays as is now, the arch-vt8500 patch will introduce an
> > unresolved symbol.
> > If I move the clock code from the arch-vt8500 patch to the clock patch,
> > then the clock patch won't apply because it needs the arch-vt8500 patch
> > first and Mike won't have that patch, but it would be fine if both
> > patches went in via your tree.
> 
> Why don't you add a #define in the first patch that makes your
> to-be-unresolved symbol a no-op and then drop it within the clock
> patch?
> 
> Best,
> Alexey
> 
I knew we kept you around for a reason :)

Cheers,
Tony P

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found]                         ` <CABjd4Yxxf5XDc6gs0WABZgF3SOd89J7CfjsU9uitOg4qpQ4WEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
  2012-08-24  7:14                           ` Tony Prisk
@ 2012-08-24  7:18                           ` Tony Prisk
  1 sibling, 0 replies; 24+ messages in thread
From: Tony Prisk @ 2012-08-24  7:18 UTC (permalink / raw)
  To: Alexey Charkov
  Cc: a.zummo-BfzFCNDTiLLj+vYz1yj4TQ,
	linux-fbdev-u79uwXL29TY76Z2rM5mHXA, linux-lFZ/pmaqli7XmaaqVzeoHQ,
	linus.walleij-0IS4wlFg1OjSUeElwK9/Pw,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, FlorianSchandinat-Mmb7MZpHnFY,
	gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	swarren-DDmLM1+adcrQT0dZR+AlfA, alan-VuQAYsv1563Yd54FQh9/CA,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

On Fri, 2012-08-24 at 09:54 +0400, Alexey Charkov wrote:
> 2012/8/24 Tony Prisk <linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>:
> > On Fri, 2012-08-24 at 05:40 +0000, Arnd Bergmann wrote:
> >> On Thursday 23 August 2012, Tony Prisk wrote:
> >> > I was about to say that if Mike has any issues with the driver that I
> >> > can fix the patch conflict at the same time, but I just realised that
> >> > its more work than I originally thought :)
> >> >
> >> > I was going to move the arch-vt8500 part of the clocks patch back into
> >> > the clocks patch - but that will just move the issue from arm-soc to
> >> > clocks because Mike's branch won't have the arch-vt8500 patch so the
> >> > patch will fail.
> >>
> >> But that's ok, because without the arch-v8500 part, nothing uses
> >> the vt8500-clock driver, so nothing breaks. You can introduce broken
> >> code in the meantime as long as it's impossible to enable and it will
> >> work afterwards.
> >>
> >>       Arnd
> >
> > You lost me a little bit there :)
> > If it stays as is now, the arch-vt8500 patch will introduce an
> > unresolved symbol.
> > If I move the clock code from the arch-vt8500 patch to the clock patch,
> > then the clock patch won't apply because it needs the arch-vt8500 patch
> > first and Mike won't have that patch, but it would be fine if both
> > patches went in via your tree.
> 
> Why don't you add a #define in the first patch that makes your
> to-be-unresolved symbol a no-op and then drop it within the clock
> patch?
> 
> Best,
> Alexey
> 
Actually - that doesn't resolve the problem unless it all goes in via
the same tree still because the clock patch can only drop the #define if
the arch-vt8500 patch exists still - same as problem #2 I mentioned.

If the clock patch goes via Mikes tree he will need the arch-vt8500
patch as well - don't think it can be avoided.

Still easier to send the whole lot via arm-soc, then at least we can
resolve the patch conflicts without having to apply the patches twice.

Regards
Tony P

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
       [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
                     ` (9 preceding siblings ...)
  2012-08-23 10:40   ` [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree *** Arnd Bergmann
@ 2012-08-25  3:32   ` Stephen Warren
  10 siblings, 0 replies; 24+ messages in thread
From: Stephen Warren @ 2012-08-25  3:32 UTC (permalink / raw)
  To: Tony Prisk
  Cc: Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Greg Kroah-Hartman,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox

On 08/23/2012 01:35 AM, Tony Prisk wrote:
> This patchset updates arch-vt8500 to devicetree and removes all the old-style
> code. Support for WM8650 has also been added.
> 
> Example dts/dtsi files are given for the three currently supported models.
> 
> Major changes:
> 
> GPIO code has been converted to a platform_device and rewritten as WM8505
> support was broken. Add support for WM8650 gpio controller.
> 
> UHCI support was missing. Added this as a generic non-pci uhci controller as
> it doesn't require anything special. Should be usable by any system that doesn't
> have special requirements to get the UHCI controller working.
> 
> Framebuffer code patched to support WM8650. The bindings for this are of concern
> but there doesn't seem to be a formalized binding yet. This patch is based off
> Sascha Hauer's current patch on the dri-devel mailing list and should be easily
> patched out when its finalized.
> 
> Patchset based on Arnd's arm-soc/for-next branch.

I believe all the issues I pointed out are fixed in this series. I'm not
sure I reviewed it in enough detail to ack it, but I'm fine with what I saw.

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
       [not found]     ` <1345707346-9035-8-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
@ 2012-09-20 23:13       ` Rob Herring
  0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2012-09-20 23:13 UTC (permalink / raw)
  To: Tony Prisk
  Cc: vt8500-wm8505-linux-kernel-/JYPxA39Uh5TLH3MbocFFw,
	Alessandro Zummo, linux-fbdev-u79uwXL29TY76Z2rM5mHXA,
	Russell King, Linus Walleij, Florian Tobias Schandinat,
	Greg Kroah-Hartman, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
	linux-usb-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring,
	linux-serial-u79uwXL29TY76Z2rM5mHXA,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw, Stephen Warren, Mike Turquette,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Alan Cox,
	Olof Johansson

On 08/23/2012 02:35 AM, Tony Prisk wrote:
> Bindings for gpio, interrupt controller, power management controller,
> timer, realtime clock, serial uart, ehci and uhci controllers and
> framebuffer controllers used on the arch-vt8500 platform.
> 
> Framebuffer binding also specifies a 'display' node which is required
> for determining the lcd panel data.

Overall, these bindings look okay, but there is some effort to
standardize a binding for displays:

http://comments.gmane.org/gmane.linux.drivers.devicetree/21386

I would like to see that used rather than something custom.

Rob

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2012-09-20 23:13 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-08-23  7:35 [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree *** Tony Prisk
     [not found] ` <1345707346-9035-1-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
2012-08-23  7:35   ` [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's Tony Prisk
2012-08-23  7:35   ` [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc Tony Prisk
2012-08-23  7:35   ` [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial Tony Prisk
2012-08-23 10:53     ` Alan Cox
2012-08-23  7:35   ` [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci Tony Prisk
2012-08-23  7:35   ` [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb Tony Prisk
2012-08-23  7:35   ` [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support Tony Prisk
2012-08-23  7:35   ` [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices Tony Prisk
     [not found]     ` <1345707346-9035-8-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
2012-09-20 23:13       ` Rob Herring
2012-08-23  7:35   ` [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500 Tony Prisk
     [not found]     ` <1345707346-9035-9-git-send-email-linux-ci5G2KO2hbZ+pU9mqzGVBQ@public.gmane.org>
2012-08-23 13:31       ` [rtc-linux] " Linus Walleij
2012-08-23  7:35   ` [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support Tony Prisk
2012-08-23 10:40   ` [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree *** Arnd Bergmann
     [not found]     ` <201208231040.16702.arnd-r2nGTMty4D4@public.gmane.org>
2012-08-23 12:58       ` Tony Prisk
     [not found]         ` <76F764B079F92A4E843589C893D0A022DAF68C14-A1+cU8XkcJSYgi1/3OOQJ8krCUz0bFs7@public.gmane.org>
2012-08-23 13:22           ` Arnd Bergmann
     [not found]             ` <201208231322.23077.arnd-r2nGTMty4D4@public.gmane.org>
2012-08-23 21:48               ` Tony Prisk
2012-08-24  5:40                 ` Arnd Bergmann
     [not found]                   ` <201208240540.12316.arnd-r2nGTMty4D4@public.gmane.org>
2012-08-24  5:52                     ` Tony Prisk
2012-08-24  5:54                       ` Alexey Charkov
     [not found]                         ` <CABjd4Yxxf5XDc6gs0WABZgF3SOd89J7CfjsU9uitOg4qpQ4WEQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2012-08-24  7:14                           ` Tony Prisk
2012-08-24  7:18                           ` Tony Prisk
2012-08-23 13:34           ` [rtc-linux] " Linus Walleij
2012-08-25  3:32   ` Stephen Warren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).