* [PATCH v3 1/2] dt: binding: Add Qualcomm WCNSS control binding
@ 2016-06-06 23:46 Bjorn Andersson
2016-06-06 23:46 ` [PATCH v3 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
0 siblings, 2 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-06-06 23:46 UTC (permalink / raw)
To: Andy Gross, Rob Herring
Cc: linux-arm-msm, linux-soc, linux-kernel, devicetree
This binding describes the control interface for the Qualcomm WCNSS.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- Fixup some misstakes in the document pointed out by Rob
Changes since v1:
- Introduce reference to wcnss block node for register block definition
- Use wcnss block node compatible for hw version detection (riva vs pronto)
- Clean up compatible name for bt node
.../devicetree/bindings/soc/qcom/qcom,wcnss.txt | 116 +++++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
new file mode 100644
index 000000000000..c2a45043b971
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -0,0 +1,116 @@
+Qualcomm WCNSS Binding
+
+This binding describes the Qualcomm WCNSS hardware. It consists of control
+block and a BT, WiFi and FM radio block, all using SMD as command channels.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be: "qcom,wcnss",
+
+- qcom,smd-channel:
+ Usage: required
+ Value type: <string>
+ Definition: standard SMD property specifying the SMD channel used for
+ communication with the WiFi firmware.
+ Should be "WCNSS_CTRL".
+
+- qcom,mmio:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a node specifying the wcnss "ccu" and "dxe"
+ register blocks. The node must be compatible with one of
+ the following:
+ "qcom,riva",
+ "qcom,pronto"
+
+= SUBNODES
+The subnodes of the wcnss node are optional and describe the individual blocks in
+the WCNSS.
+
+== Bluetooth
+The following properties are defined to the bluetooth node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,wcnss-bt"
+
+== WiFi
+The following properties are defined to the WiFi node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,wcnss-wlan",
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the "rx" and "tx" interrupts
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "rx" and "tx"
+
+- qcom,smem-state:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should reference the tx-enable and tx-rings-empty SMEM states
+
+- qcom,state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "tx-enable" and "tx-rings-empty"
+
+= EXAMPLE
+The following example represents a SMD node, with one edge representing the
+"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
+described; as found on the 8974 platform.
+
+smd {
+ compatible = "qcom,smd";
+
+ pronto-edge {
+ interrupts = <0 142 1>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wlan {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <0 145 0>, <0 146 0>;
+ interrupt-names = "tx", "rx";
+
+ qcom,state = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+};
+
+soc {
+ pronto: pronto {
+ compatible = "qcom,pronto";
+
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+ };
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
2016-06-06 23:46 [PATCH v3 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
@ 2016-06-06 23:46 ` Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
1 sibling, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-06-06 23:46 UTC (permalink / raw)
To: Andy Gross, Rob Herring
Cc: linux-arm-msm, linux-soc, linux-kernel, devicetree
We need the signal from wcnss_ctrl indicating that the firmware is up
and running before we can communicate with the other components of the
chip. So make these other components children of the wcnss_ctrl device,
so they can be probed in order.
The process seems to take between 1/2-5 seconds, so this is done in a
worker, instead of holding up the probe.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- None
Changes since v1:
- Clean up return information from wcnss_download_nv (success vs cbc expected)
drivers/soc/qcom/wcnss_ctrl.c | 125 ++++++++++++++++++++++++++++++------
include/linux/soc/qcom/wcnss_ctrl.h | 8 +++
2 files changed, 114 insertions(+), 19 deletions(-)
create mode 100644 include/linux/soc/qcom/wcnss_ctrl.h
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index c544f3d2c6ee..520aedd29965 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2016, Linaro Ltd.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -14,8 +15,16 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
#define WCNSS_REQUEST_TIMEOUT (5 * HZ)
+#define WCNSS_CBC_TIMEOUT (10 * HZ)
+
+#define WCNSS_ACK_DONE_BOOTING 1
+#define WCNSS_ACK_COLD_BOOTING 2
#define NV_FRAGMENT_SIZE 3072
#define NVBIN_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin"
@@ -25,17 +34,19 @@
* @dev: device handle
* @channel: SMD channel handle
* @ack: completion for outstanding requests
+ * @cbc: completion for cbc complete indication
* @ack_status: status of the outstanding request
- * @download_nv_work: worker for uploading nv binary
+ * @probe_work: worker for uploading nv binary
*/
struct wcnss_ctrl {
struct device *dev;
struct qcom_smd_channel *channel;
struct completion ack;
+ struct completion cbc;
int ack_status;
- struct work_struct download_nv_work;
+ struct work_struct probe_work;
};
/* message types */
@@ -48,6 +59,11 @@ enum {
WCNSS_UPLOAD_CAL_RESP,
WCNSS_DOWNLOAD_CAL_REQ,
WCNSS_DOWNLOAD_CAL_RESP,
+ WCNSS_VBAT_LEVEL_IND,
+ WCNSS_BUILD_VERSION_REQ,
+ WCNSS_BUILD_VERSION_RESP,
+ WCNSS_PM_CONFIG_REQ,
+ WCNSS_CBC_COMPLETE_IND,
};
/**
@@ -128,7 +144,7 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
version->major, version->minor,
version->version, version->revision);
- schedule_work(&wcnss->download_nv_work);
+ complete(&wcnss->ack);
break;
case WCNSS_DOWNLOAD_NV_RESP:
if (count != sizeof(*nvresp)) {
@@ -141,6 +157,10 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
wcnss->ack_status = nvresp->status;
complete(&wcnss->ack);
break;
+ case WCNSS_CBC_COMPLETE_IND:
+ dev_dbg(wcnss->dev, "cold boot complete\n");
+ complete(&wcnss->cbc);
+ break;
default:
dev_info(wcnss->dev, "unknown message type %d\n", hdr->type);
break;
@@ -156,20 +176,32 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
static int wcnss_request_version(struct wcnss_ctrl *wcnss)
{
struct wcnss_msg_hdr msg;
+ int ret;
msg.type = WCNSS_VERSION_REQ;
msg.len = sizeof(msg);
+ ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_CBC_TIMEOUT);
+ if (!ret) {
+ dev_err(wcnss->dev, "timeout waiting for version response\n");
+ return -ETIMEDOUT;
+ }
- return qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ return 0;
}
/**
* wcnss_download_nv() - send nv binary to WCNSS
- * @work: work struct to acquire wcnss context
+ * @wcnss: wcnss_ctrl state handle
+ * @expect_cbc: indicator to caller that an cbc event is expected
+ *
+ * Returns 0 on success. Negative errno on failure.
*/
-static void wcnss_download_nv(struct work_struct *work)
+static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
{
- struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work);
struct wcnss_download_nv_req *req;
const struct firmware *fw;
const void *data;
@@ -178,10 +210,10 @@ static void wcnss_download_nv(struct work_struct *work)
req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL);
if (!req)
- return;
+ return -ENOMEM;
ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
NVBIN_FILE, ret);
goto free_req;
@@ -207,7 +239,7 @@ static void wcnss_download_nv(struct work_struct *work)
memcpy(req->fragment, data, req->frag_size);
ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "failed to send smd packet\n");
goto release_fw;
}
@@ -220,16 +252,58 @@ static void wcnss_download_nv(struct work_struct *work)
} while (left > 0);
ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
- if (!ret)
+ if (!ret) {
dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
- else if (wcnss->ack_status != 1)
- dev_err(wcnss->dev, "nv upload response failed err: %d\n",
- wcnss->ack_status);
+ ret = -ETIMEDOUT;
+ } else {
+ *expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
+ ret = 0;
+ }
release_fw:
release_firmware(fw);
free_req:
kfree(req);
+
+ return ret;
+}
+
+/**
+ * qcom_wcnss_open_channel() - open additional SMD channel to WCNSS
+ * @wcnss: wcnss handle, retrieved from drvdata
+ * @name: SMD channel name
+ * @cb: callback to handle incoming data on the channel
+ */
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+ struct wcnss_ctrl *_wcnss = wcnss;
+
+ return qcom_smd_open_channel(_wcnss->channel, name, cb);
+}
+EXPORT_SYMBOL(qcom_wcnss_open_channel);
+
+static void wcnss_async_probe(struct work_struct *work)
+{
+ struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, probe_work);
+ bool expect_cbc;
+ int ret;
+
+ ret = wcnss_request_version(wcnss);
+ if (ret < 0)
+ return;
+
+ ret = wcnss_download_nv(wcnss, &expect_cbc);
+ if (ret < 0)
+ return;
+
+ /* Wait for pending cold boot completion if indicated by the nv downloader */
+ if (expect_cbc) {
+ ret = wait_for_completion_timeout(&wcnss->cbc, WCNSS_REQUEST_TIMEOUT);
+ if (!ret)
+ dev_err(wcnss->dev, "expected cold boot completion\n");
+ }
+
+ of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
}
static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
@@ -244,25 +318,38 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
wcnss->channel = sdev->channel;
init_completion(&wcnss->ack);
- INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
+ init_completion(&wcnss->cbc);
+ INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
qcom_smd_set_drvdata(sdev->channel, wcnss);
+ dev_set_drvdata(&sdev->dev, wcnss);
+
+ schedule_work(&wcnss->probe_work);
+
+ return 0;
+}
+
+static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+{
+ struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
- return wcnss_request_version(wcnss);
+ cancel_work_sync(&wcnss->probe_work);
+ of_platform_depopulate(&sdev->dev);
}
-static const struct qcom_smd_id wcnss_ctrl_smd_match[] = {
- { .name = "WCNSS_CTRL" },
+static const struct of_device_id wcnss_ctrl_of_match[] = {
+ { .compatible = "qcom,wcnss", },
{}
};
static struct qcom_smd_driver wcnss_ctrl_driver = {
.probe = wcnss_ctrl_probe,
+ .remove = wcnss_ctrl_remove,
.callback = wcnss_ctrl_smd_callback,
- .smd_match_table = wcnss_ctrl_smd_match,
.driver = {
.name = "qcom_wcnss_ctrl",
.owner = THIS_MODULE,
+ .of_match_table = wcnss_ctrl_of_match,
},
};
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
new file mode 100644
index 000000000000..a37bc5538f19
--- /dev/null
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -0,0 +1,8 @@
+#ifndef __WCNSS_CTRL_H__
+#define __WCNSS_CTRL_H__
+
+#include <linux/soc/qcom/smd.h>
+
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+
+#endif
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding
2016-06-06 23:46 [PATCH v3 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
2016-06-06 23:46 ` [PATCH v3 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
@ 2016-06-06 23:58 ` Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
2016-06-08 19:50 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Rob Herring
1 sibling, 2 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-06-06 23:58 UTC (permalink / raw)
To: Andy Gross, Rob Herring
Cc: linux-arm-msm, linux-soc, linux-kernel, devicetree
This binding describes the control interface for the Qualcomm WCNSS.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v3:
- Included missed fixup of the smem-state properties
Changes since v2:
- Fixup some misstakes in the document pointed out by Rob
Changes since v1:
- Introduce reference to wcnss block node for register block definition
- Use wcnss block node compatible for hw version detection (riva vs pronto)
- Clean up compatible name for bt node
.../devicetree/bindings/soc/qcom/qcom,wcnss.txt | 116 +++++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
new file mode 100644
index 000000000000..4ea39e9186a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -0,0 +1,116 @@
+Qualcomm WCNSS Binding
+
+This binding describes the Qualcomm WCNSS hardware. It consists of control
+block and a BT, WiFi and FM radio block, all using SMD as command channels.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be: "qcom,wcnss",
+
+- qcom,smd-channel:
+ Usage: required
+ Value type: <string>
+ Definition: standard SMD property specifying the SMD channel used for
+ communication with the WiFi firmware.
+ Should be "WCNSS_CTRL".
+
+- qcom,mmio:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a node specifying the wcnss "ccu" and "dxe"
+ register blocks. The node must be compatible with one of
+ the following:
+ "qcom,riva",
+ "qcom,pronto"
+
+= SUBNODES
+The subnodes of the wcnss node are optional and describe the individual blocks in
+the WCNSS.
+
+== Bluetooth
+The following properties are defined to the bluetooth node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,wcnss-bt"
+
+== WiFi
+The following properties are defined to the WiFi node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,wcnss-wlan",
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the "rx" and "tx" interrupts
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "rx" and "tx"
+
+- qcom,smem-state:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should reference the tx-enable and tx-rings-empty SMEM states
+
+- qcom,smem-state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "tx-enable" and "tx-rings-empty"
+
+= EXAMPLE
+The following example represents a SMD node, with one edge representing the
+"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
+described; as found on the 8974 platform.
+
+smd {
+ compatible = "qcom,smd";
+
+ pronto-edge {
+ interrupts = <0 142 1>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wlan {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <0 145 0>, <0 146 0>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+};
+
+soc {
+ pronto: pronto {
+ compatible = "qcom,pronto";
+
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+ };
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
2016-06-06 23:58 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
@ 2016-06-06 23:58 ` Bjorn Andersson
2016-06-08 19:50 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Bjorn Andersson @ 2016-06-06 23:58 UTC (permalink / raw)
To: Andy Gross, Rob Herring
Cc: linux-arm-msm, linux-soc, linux-kernel, devicetree
We need the signal from wcnss_ctrl indicating that the firmware is up
and running before we can communicate with the other components of the
chip. So make these other components children of the wcnss_ctrl device,
so they can be probed in order.
The process seems to take between 1/2-5 seconds, so this is done in a
worker, instead of holding up the probe.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v3:
- None
Changes since v2:
- None
Changes since v1:
- Clean up return information from wcnss_download_nv (success vs cbc expected)
drivers/soc/qcom/wcnss_ctrl.c | 125 ++++++++++++++++++++++++++++++------
include/linux/soc/qcom/wcnss_ctrl.h | 8 +++
2 files changed, 114 insertions(+), 19 deletions(-)
create mode 100644 include/linux/soc/qcom/wcnss_ctrl.h
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index c544f3d2c6ee..520aedd29965 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -1,4 +1,5 @@
/*
+ * Copyright (c) 2016, Linaro Ltd.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -14,8 +15,16 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/wcnss_ctrl.h>
#define WCNSS_REQUEST_TIMEOUT (5 * HZ)
+#define WCNSS_CBC_TIMEOUT (10 * HZ)
+
+#define WCNSS_ACK_DONE_BOOTING 1
+#define WCNSS_ACK_COLD_BOOTING 2
#define NV_FRAGMENT_SIZE 3072
#define NVBIN_FILE "wlan/prima/WCNSS_qcom_wlan_nv.bin"
@@ -25,17 +34,19 @@
* @dev: device handle
* @channel: SMD channel handle
* @ack: completion for outstanding requests
+ * @cbc: completion for cbc complete indication
* @ack_status: status of the outstanding request
- * @download_nv_work: worker for uploading nv binary
+ * @probe_work: worker for uploading nv binary
*/
struct wcnss_ctrl {
struct device *dev;
struct qcom_smd_channel *channel;
struct completion ack;
+ struct completion cbc;
int ack_status;
- struct work_struct download_nv_work;
+ struct work_struct probe_work;
};
/* message types */
@@ -48,6 +59,11 @@ enum {
WCNSS_UPLOAD_CAL_RESP,
WCNSS_DOWNLOAD_CAL_REQ,
WCNSS_DOWNLOAD_CAL_RESP,
+ WCNSS_VBAT_LEVEL_IND,
+ WCNSS_BUILD_VERSION_REQ,
+ WCNSS_BUILD_VERSION_RESP,
+ WCNSS_PM_CONFIG_REQ,
+ WCNSS_CBC_COMPLETE_IND,
};
/**
@@ -128,7 +144,7 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
version->major, version->minor,
version->version, version->revision);
- schedule_work(&wcnss->download_nv_work);
+ complete(&wcnss->ack);
break;
case WCNSS_DOWNLOAD_NV_RESP:
if (count != sizeof(*nvresp)) {
@@ -141,6 +157,10 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
wcnss->ack_status = nvresp->status;
complete(&wcnss->ack);
break;
+ case WCNSS_CBC_COMPLETE_IND:
+ dev_dbg(wcnss->dev, "cold boot complete\n");
+ complete(&wcnss->cbc);
+ break;
default:
dev_info(wcnss->dev, "unknown message type %d\n", hdr->type);
break;
@@ -156,20 +176,32 @@ static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
static int wcnss_request_version(struct wcnss_ctrl *wcnss)
{
struct wcnss_msg_hdr msg;
+ int ret;
msg.type = WCNSS_VERSION_REQ;
msg.len = sizeof(msg);
+ ret = qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_CBC_TIMEOUT);
+ if (!ret) {
+ dev_err(wcnss->dev, "timeout waiting for version response\n");
+ return -ETIMEDOUT;
+ }
- return qcom_smd_send(wcnss->channel, &msg, sizeof(msg));
+ return 0;
}
/**
* wcnss_download_nv() - send nv binary to WCNSS
- * @work: work struct to acquire wcnss context
+ * @wcnss: wcnss_ctrl state handle
+ * @expect_cbc: indicator to caller that an cbc event is expected
+ *
+ * Returns 0 on success. Negative errno on failure.
*/
-static void wcnss_download_nv(struct work_struct *work)
+static int wcnss_download_nv(struct wcnss_ctrl *wcnss, bool *expect_cbc)
{
- struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, download_nv_work);
struct wcnss_download_nv_req *req;
const struct firmware *fw;
const void *data;
@@ -178,10 +210,10 @@ static void wcnss_download_nv(struct work_struct *work)
req = kzalloc(sizeof(*req) + NV_FRAGMENT_SIZE, GFP_KERNEL);
if (!req)
- return;
+ return -ENOMEM;
ret = request_firmware(&fw, NVBIN_FILE, wcnss->dev);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "Failed to load nv file %s: %d\n",
NVBIN_FILE, ret);
goto free_req;
@@ -207,7 +239,7 @@ static void wcnss_download_nv(struct work_struct *work)
memcpy(req->fragment, data, req->frag_size);
ret = qcom_smd_send(wcnss->channel, req, req->hdr.len);
- if (ret) {
+ if (ret < 0) {
dev_err(wcnss->dev, "failed to send smd packet\n");
goto release_fw;
}
@@ -220,16 +252,58 @@ static void wcnss_download_nv(struct work_struct *work)
} while (left > 0);
ret = wait_for_completion_timeout(&wcnss->ack, WCNSS_REQUEST_TIMEOUT);
- if (!ret)
+ if (!ret) {
dev_err(wcnss->dev, "timeout waiting for nv upload ack\n");
- else if (wcnss->ack_status != 1)
- dev_err(wcnss->dev, "nv upload response failed err: %d\n",
- wcnss->ack_status);
+ ret = -ETIMEDOUT;
+ } else {
+ *expect_cbc = wcnss->ack_status == WCNSS_ACK_COLD_BOOTING;
+ ret = 0;
+ }
release_fw:
release_firmware(fw);
free_req:
kfree(req);
+
+ return ret;
+}
+
+/**
+ * qcom_wcnss_open_channel() - open additional SMD channel to WCNSS
+ * @wcnss: wcnss handle, retrieved from drvdata
+ * @name: SMD channel name
+ * @cb: callback to handle incoming data on the channel
+ */
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+ struct wcnss_ctrl *_wcnss = wcnss;
+
+ return qcom_smd_open_channel(_wcnss->channel, name, cb);
+}
+EXPORT_SYMBOL(qcom_wcnss_open_channel);
+
+static void wcnss_async_probe(struct work_struct *work)
+{
+ struct wcnss_ctrl *wcnss = container_of(work, struct wcnss_ctrl, probe_work);
+ bool expect_cbc;
+ int ret;
+
+ ret = wcnss_request_version(wcnss);
+ if (ret < 0)
+ return;
+
+ ret = wcnss_download_nv(wcnss, &expect_cbc);
+ if (ret < 0)
+ return;
+
+ /* Wait for pending cold boot completion if indicated by the nv downloader */
+ if (expect_cbc) {
+ ret = wait_for_completion_timeout(&wcnss->cbc, WCNSS_REQUEST_TIMEOUT);
+ if (!ret)
+ dev_err(wcnss->dev, "expected cold boot completion\n");
+ }
+
+ of_platform_populate(wcnss->dev->of_node, NULL, NULL, wcnss->dev);
}
static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
@@ -244,25 +318,38 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
wcnss->channel = sdev->channel;
init_completion(&wcnss->ack);
- INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
+ init_completion(&wcnss->cbc);
+ INIT_WORK(&wcnss->probe_work, wcnss_async_probe);
qcom_smd_set_drvdata(sdev->channel, wcnss);
+ dev_set_drvdata(&sdev->dev, wcnss);
+
+ schedule_work(&wcnss->probe_work);
+
+ return 0;
+}
+
+static void wcnss_ctrl_remove(struct qcom_smd_device *sdev)
+{
+ struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(sdev->channel);
- return wcnss_request_version(wcnss);
+ cancel_work_sync(&wcnss->probe_work);
+ of_platform_depopulate(&sdev->dev);
}
-static const struct qcom_smd_id wcnss_ctrl_smd_match[] = {
- { .name = "WCNSS_CTRL" },
+static const struct of_device_id wcnss_ctrl_of_match[] = {
+ { .compatible = "qcom,wcnss", },
{}
};
static struct qcom_smd_driver wcnss_ctrl_driver = {
.probe = wcnss_ctrl_probe,
+ .remove = wcnss_ctrl_remove,
.callback = wcnss_ctrl_smd_callback,
- .smd_match_table = wcnss_ctrl_smd_match,
.driver = {
.name = "qcom_wcnss_ctrl",
.owner = THIS_MODULE,
+ .of_match_table = wcnss_ctrl_of_match,
},
};
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
new file mode 100644
index 000000000000..a37bc5538f19
--- /dev/null
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -0,0 +1,8 @@
+#ifndef __WCNSS_CTRL_H__
+#define __WCNSS_CTRL_H__
+
+#include <linux/soc/qcom/smd.h>
+
+struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+
+#endif
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding
2016-06-06 23:58 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
@ 2016-06-08 19:50 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2016-06-08 19:50 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, linux-arm-msm, linux-soc, linux-kernel, devicetree
On Mon, Jun 06, 2016 at 04:58:19PM -0700, Bjorn Andersson wrote:
> This binding describes the control interface for the Qualcomm WCNSS.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v3:
> - Included missed fixup of the smem-state properties
>
> Changes since v2:
> - Fixup some misstakes in the document pointed out by Rob
>
> Changes since v1:
> - Introduce reference to wcnss block node for register block definition
> - Use wcnss block node compatible for hw version detection (riva vs pronto)
> - Clean up compatible name for bt node
>
> .../devicetree/bindings/soc/qcom/qcom,wcnss.txt | 116 +++++++++++++++++++++
> 1 file changed, 116 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-06-08 19:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-06-06 23:46 [PATCH v3 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
2016-06-06 23:46 ` [PATCH v3 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Bjorn Andersson
2016-06-06 23:58 ` [PATCH v4 2/2] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson
2016-06-08 19:50 ` [PATCH v4 1/2] dt: binding: Add Qualcomm WCNSS control binding Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).