[PATCH v3 0/6] support gpmi on i.MX6UL/7D and HW bitflip on i.MX6QP/7D

[PATCH v3 0/6] support gpmi on i.MX6UL/7D and HW bitflip on i.MX6QP/7D

[Han Xu]

add support for gpmi nand on i.MX6UL and i.MX7D, document the related
properties in DT and add the HW bitflip detection and correction for
i.MX6QP and i.MX7D.

v1 ---> v2:
fix several indent and open parenthesis issues
drop off the void cast
rebase to latest code and adopt to SW bitflip code
split bitflip and i.MX6QP code

v2 ---> v3:
calculate erased chunks and fix bitflip after loop
add more details for i.MX7 clock name
fix the patch name for documentation

Han Xu (6):
  mtd: nand: gpmi: add GPMI NAND support for i.MX7D
  Documentation: dt: mtd: gpmi: document the clocks and clock-names in
    DT property
  mtd: nand: gpmi: add GPMI NAND support for i.MX6QP
  mtd: nand: gpmi: correct bitflip for erased NAND page
  mtd: nand: gpmi: support NAND on i.MX6UL
  Documentation: dt: mtd: gpmi: document the new supported chip in DT

 .../devicetree/bindings/mtd/gpmi-nand.txt          | 12 ++-
 drivers/mtd/nand/gpmi-nand/bch-regs.h              | 24 ++++--
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c              | 15 +++-
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c             | 85 +++++++++++++++++++---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h             | 15 +++-
 5 files changed, 127 insertions(+), 24 deletions(-)

-- 
1.9.1

[PATCH v3 1/6] mtd: nand: gpmi: add GPMI NAND support for i.MX7D

[Han Xu]

support GPMI NAND on i.MX7D

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 drivers/mtd/nand/gpmi-nand/bch-regs.h  | 14 +++++++-------
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c  | 10 ++++++----
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 30 ++++++++++++++++++++++++------
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h |  7 +++++--
 4 files changed, 42 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 05bb91f..228142c 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2016 Freescale Semiconductor, Inc.
  * Copyright 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -54,7 +54,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
 #define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
-	(GPMI_IS_MX6(x)					\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
@@ -65,7 +65,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT0_GF(v, x)				\
-	((GPMI_IS_MX6(x) && ((v) == 14))			\
+	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))	\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14)	\
 		: 0						\
@@ -77,7 +77,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
 #define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
-	(GPMI_IS_MX6(x)						\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
 	)
@@ -96,7 +96,7 @@
 #define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
 #define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
-	(GPMI_IS_MX6(x)					\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))				\
 		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
 		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
@@ -107,7 +107,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14			\
 				(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
 #define BF_BCH_FLASH0LAYOUT1_GF(v, x)				\
-	((GPMI_IS_MX6(x) && ((v) == 14))			\
+	(((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14))	\
 		? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)	\
 			& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14)	\
 		: 0						\
@@ -119,7 +119,7 @@
 #define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
 			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
 #define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
-	(GPMI_IS_MX6(x)						\
+	((GPMI_IS_MX6(x) || GPMI_IS_MX7(x))	\
 		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
 		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
 	)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 0f68a99..358ff5d 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008-2016 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -971,7 +971,8 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
 	struct nand_chip *chip = &this->nand;
 
 	/* Enable the asynchronous EDO feature. */
-	if (GPMI_IS_MX6(this) && chip->onfi_version) {
+	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+	    chip->onfi_version) {
 		int mode = onfi_get_async_timing_mode(chip);
 
 		/* We only support the timing mode 4 and mode 5. */
@@ -1093,12 +1094,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 	if (GPMI_IS_MX23(this)) {
 		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
 		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this) ||
+	           GPMI_IS_MX7(this)) {
 		/*
 		 * In the imx6, all the ready/busy pins are bound
 		 * together. So we only need to check chip 0.
 		 */
-		if (GPMI_IS_MX6(this))
+		if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
 			chip = 0;
 
 		/* MX28 shares the same R/B register as MX6Q. */
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 6e46156..a8936fd 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2016 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -110,6 +110,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx7d = {
+	.type = IS_MX7D,
+	.bch_max_ecc_strength = 62,
+	.max_chain_delay = 12,
+};
+
 static irqreturn_t bch_irq(int irq, void *cookie)
 {
 	struct gpmi_nand_data *this = cookie;
@@ -601,6 +607,10 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
 	"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
 };
 
+static char *extra_clks_for_mx7d[GPMI_CLK_MAX] = {
+	"gpmi_bch_apb",
+};
+
 static int gpmi_get_clks(struct gpmi_nand_data *this)
 {
 	struct resources *r = &this->resources;
@@ -618,6 +628,8 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 	/* Get extra clocks */
 	if (GPMI_IS_MX6(this))
 		extra_clks = extra_clks_for_mx6q;
+	if (GPMI_IS_MX7(this))
+		extra_clks = extra_clks_for_mx7d;
 	if (!extra_clks)
 		return 0;
 
@@ -634,7 +646,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6(this))
+	if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
 		/*
 		 * Set the default value for the gpmi clock.
 		 *
@@ -1965,8 +1977,8 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	 *  (1) the chip is imx6, and
 	 *  (2) the size of the ECC parity is byte aligned.
 	 */
-	if (GPMI_IS_MX6(this) &&
-		((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+	if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+	    ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
 		ecc->read_subpage = gpmi_ecc_read_subpage;
 		chip->options |= NAND_SUBPAGE_READ;
 	}
@@ -1987,6 +1999,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	struct nand_chip *chip = &this->nand;
 	struct mtd_info  *mtd = nand_to_mtd(chip);
 	int ret;
+	int max_chips;
 
 	/* init current chip */
 	this->current_chip	= -1;
@@ -2021,7 +2034,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
+	max_chips = (GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) ? 2 : 1;
+	ret = nand_scan_ident(mtd, max_chips, NULL);
 	if (ret)
 		goto err_out;
 
@@ -2074,7 +2088,11 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 	}, {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
-	}, {}
+	}, {
+		.compatible = "fsl,imx7d-gpmi-nand",
+		.data = &gpmi_devdata_imx7d,
+	}, { /* sentinel */ }
+
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
 
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f..04a3584 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2016 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -123,7 +123,8 @@ enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
-	IS_MX6SX
+	IS_MX6SX,
+	IS_MX7D,
 };
 
 struct gpmi_devdata {
@@ -305,6 +306,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
+#define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

[PATCH v3 2/6] Documentation: dt: mtd: gpmi: document the clocks and clock-names in DT property

[Han Xu]

add the clocks and clock-names in DT property, gpmi-io clock is
mandatory for all platforms, but some platforms, such as i.MX6Q may
need more extra clocks for submodules. More details please refer to the
SoC reference manual.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index d02acaf..a2fd034 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -13,6 +13,13 @@ Required properties:
     and GPMI DMA channel ID.
     Refer to dma.txt and fsl-mxs-dma.txt for details.
   - dma-names: Must be "rx-tx".
+  - clocks : The clocks needed by the gpmi controller. This field varies
+    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
+    need several extra clocks, such as i.MX6 series, which requires "gpmi_apb,
+    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules, while i.MX7 only
+    need gpmi_bch_apb. Please refer to the HW design manual.
+  - clock-names : the name of the clocks, please refer to the HW design
+    manual.
 
 Optional properties:
   - nand-on-flash-bbt: boolean to enable on flash bbt option if not
@@ -51,6 +58,8 @@ gpmi-nand@8000c000 {
 	interrupt-names = "bch";
 	dmas = <&dma_apbh 4>;
 	dma-names = "rx-tx";
+	clocks = <&clks 50>,;
+	clock-names = "gpmi_io";
 
 	partition@0 {
 	...
-- 
1.9.1

[PATCH v3 3/6] mtd: nand: gpmi: add GPMI NAND support for i.MX6QP

[Han Xu]

support GPMI NAND on i.MX6QP

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 5 ++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a8936fd..aedaff3 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -104,6 +104,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx6qp = {
+	.type = IS_MX6QP,
+	.bch_max_ecc_strength = 40,
+	.max_chain_delay = 12,
+};
+
 static const struct gpmi_devdata gpmi_devdata_imx6sx = {
 	.type = IS_MX6SX,
 	.bch_max_ecc_strength = 62,
@@ -2086,6 +2092,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 		.compatible = "fsl,imx6q-gpmi-nand",
 		.data = &gpmi_devdata_imx6q,
 	}, {
+		.compatible = "fsl,imx6qp-gpmi-nand",
+		.data = &gpmi_devdata_imx6qp,
+	}, {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
 	}, {
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 04a3584..1cee620 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -123,6 +123,7 @@ enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
+	IS_MX6QP,
 	IS_MX6SX,
 	IS_MX7D,
 };
@@ -305,9 +306,11 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
 
-#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)	\
+				|| GPMI_IS_MX6SX(x))
 #define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

[PATCH v3 4/6] mtd: nand: gpmi: correct bitflip for erased NAND page

[Han Xu]

i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
bitflip number for erased NAND page. So for these two platform, set the
erase threshold to ecc_strength and if bitflip detected, GPMI driver
will correct the data to all 0xFF.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 drivers/mtd/nand/gpmi-nand/bch-regs.h  | 10 +++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c  |  5 +++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 37 +++++++++++++++++++++++++++++++---
 3 files changed, 49 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 228142c..2c44b88 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -30,7 +30,13 @@
 #define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
 
 #define HW_BCH_STATUS0				0x00000010
+
 #define HW_BCH_MODE				0x00000020
+#define BP_BCH_MODE_ERASE_THRESHOLD		0
+#define BM_BCH_MODE_ERASE_THRESHOLD	(0xff << BP_BCH_MODE_ERASE_THRESHOLD)
+#define BF_BCH_MODE_ERASE_THRESHOLD(v)		\
+	(((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
+
 #define HW_BCH_ENCODEPTR			0x00000030
 #define HW_BCH_DATAPTR				0x00000040
 #define HW_BCH_METAPTR				0x00000050
@@ -125,4 +131,8 @@
 	)
 
 #define HW_BCH_VERSION				0x00000160
+#define HW_BCH_DEBUG1				0x00000170
+#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT	0
+#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT		\
+		(0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
 #endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 358ff5d..0b5666a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
 
+	/* Set erase threshold to ecc_strength for mx6qp and mx7 */
+	if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
+		writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
+			r->bch_regs + HW_BCH_MODE);
+
 	/* Set *all* chip selects to use layout 0. */
 	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
 
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index aedaff3..db8e546 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1043,11 +1043,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	struct gpmi_nand_data *this = nand_get_controller_data(chip);
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
+	void __iomem *bch_regs = this->resources.bch_regs;
 	void          *payload_virt;
 	dma_addr_t    payload_phys;
 	void          *auxiliary_virt;
 	dma_addr_t    auxiliary_phys;
-	unsigned int  i;
+	unsigned int  i, j;
 	unsigned char *status;
 	unsigned int  max_bitflips = 0;
 	int           ret;
@@ -1087,9 +1088,14 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			   nfc_geo->payload_size,
 			   payload_virt, payload_phys);
 
-	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
-		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+	for (i = 0, j = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+		if (*status == STATUS_GOOD)
+			continue;
+		if (*status == STATUS_ERASED) {
+			/* count the number of erased chunks */
+			j++;
 			continue;
+		}
 
 		if (*status == STATUS_UNCORRECTABLE) {
 			int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
@@ -1098,6 +1104,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			int eccbytes;
 			int flips;
 
+			/* shortcut for i.MX7 and i.MX6QP */
+			if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this)) {
+				mtd->ecc_stats.failed++;
+				continue;
+			}
+
 			/* Read ECC bytes into our internal raw_buffer */
 			offset = nfc_geo->metadata_size * 8;
 			offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
@@ -1167,6 +1179,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		max_bitflips = max_t(unsigned int, max_bitflips, *status);
 	}
 
+	/*
+	 * i.MX6QP and i.MX7 have dedicate register to check bitflips in the
+	 * page, while it cannot tell in which chunk bitflips locate, memset
+	 * all the data if bitflips exist and all chunks are erased.
+	 */
+	if (j == nfc_geo->ecc_chunk_count &&
+		(GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))) {
+		int flips;
+
+		flips = readl(bch_regs + HW_BCH_DEBUG1);
+		if (flips) {
+			max_bitflips = max_t(unsigned int, max_bitflips,
+					flips);
+			memset(buf, ~0, nfc_geo->payload_size);
+			memset(chip->oob_poi, ~0, mtd->oobsize);
+			mtd->ecc_stats.corrected += flips;
+		}
+	}
+
 	if (oob_required) {
 		/*
 		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
-- 
1.9.1

[PATCH v3 5/6] mtd: nand: gpmi: support NAND on i.MX6UL

[Han Xu]

support GPMI NAND on i.MX6UL

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++++++
 drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 5 ++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index db8e546..f061163 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -122,6 +122,12 @@ static const struct gpmi_devdata gpmi_devdata_imx7d = {
 	.max_chain_delay = 12,
 };
 
+static const struct gpmi_devdata gpmi_devdata_imx6ul = {
+	.type = IS_MX6UL,
+	.bch_max_ecc_strength = 40,
+	.max_chain_delay = 12,
+};
+
 static irqreturn_t bch_irq(int irq, void *cookie)
 {
 	struct gpmi_nand_data *this = cookie;
@@ -2129,6 +2135,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 		.compatible = "fsl,imx6sx-gpmi-nand",
 		.data = &gpmi_devdata_imx6sx,
 	}, {
+		.compatible = "fsl,imx6ul-gpmi-nand",
+		.data = &gpmi_devdata_imx6ul,
+	}, {
 		.compatible = "fsl,imx7d-gpmi-nand",
 		.data = &gpmi_devdata_imx7d,
 	}, { /* sentinel */ }
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 1cee620..8de122e 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -126,6 +126,7 @@ enum gpmi_type {
 	IS_MX6QP,
 	IS_MX6SX,
 	IS_MX7D,
+	IS_MX6UL,
 };
 
 struct gpmi_devdata {
@@ -309,8 +310,10 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 #define GPMI_IS_MX6QP(x)	((x)->devdata->type == IS_MX6QP)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)
 #define GPMI_IS_MX7D(x)		((x)->devdata->type == IS_MX7D)
+#define GPMI_IS_MX6UL(x)	((x)->devdata->type == IS_MX6UL)
 
 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)	\
-				|| GPMI_IS_MX6SX(x))
+				|| GPMI_IS_MX6SX(x) || GPMI_IS_MX6UL(x))
+
 #define GPMI_IS_MX7(x)		(GPMI_IS_MX7D(x))
 #endif
-- 
1.9.1

[PATCH v3 6/6] Documentation: dt: mtd: gpmi: document the new supported chip in DT

[Han Xu]

listed all supported chips in DT.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
 Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index a2fd034..4997a00 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,8 @@ The GPMI nand controller provides an interface to control the
 NAND flash chips.
 
 Required properties:
-  - compatible : should be "fsl,<chip>-gpmi-nand"
+  - compatible : should be "fsl,<chip>-gpmi-nand", the chip should be imx23,
+    imx28, imx6q, imx6qp, imx6sx, imx6ul or imx7d.
   - reg : should contain registers location and length for gpmi and bch.
   - reg-names: Should contain the reg names "gpmi-nand" and "bch"
   - interrupts : BCH interrupt number.
-- 
1.9.1

Re: [PATCH v3 2/6] Documentation: dt: mtd: gpmi: document the clocks and clock-names in DT property

[Rob Herring]

On Fri, Jun 24, 2016 at 04:40:07PM -0500, Han Xu wrote:
> add the clocks and clock-names in DT property, gpmi-io clock is
> mandatory for all platforms, but some platforms, such as i.MX6Q may
> need more extra clocks for submodules. More details please refer to the
> SoC reference manual.
> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> index d02acaf..a2fd034 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
> @@ -13,6 +13,13 @@ Required properties:
>      and GPMI DMA channel ID.
>      Refer to dma.txt and fsl-mxs-dma.txt for details.
>    - dma-names: Must be "rx-tx".
> +  - clocks : The clocks needed by the gpmi controller. This field varies
> +    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
> +    need several extra clocks, such as i.MX6 series, which requires "gpmi_apb,
> +    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules, while i.MX7 only
> +    need gpmi_bch_apb. Please refer to the HW design manual.
> +  - clock-names : the name of the clocks, please refer to the HW design
> +    manual.

No please list the names here (I assume what is above?). Also need to 
specify the order of the clocks. It would be clearest if you list things 
by exact compatible strings.

Rob

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v3 6/6] Documentation: dt: mtd: gpmi: document the new supported chip in DT

[Rob Herring]

On Fri, Jun 24, 2016 at 04:40:11PM -0500, Han Xu wrote:
> listed all supported chips in DT.
> 
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 2/6] Documentation: dt: mtd: gpmi: document the clocks and clock-names in DT property

[Han Xu]

On Tue, Jun 28, 2016 at 3:55 PM, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> On Fri, Jun 24, 2016 at 04:40:07PM -0500, Han Xu wrote:
>> add the clocks and clock-names in DT property, gpmi-io clock is
>> mandatory for all platforms, but some platforms, such as i.MX6Q may
>> need more extra clocks for submodules. More details please refer to the
>> SoC reference manual.
>>
>> Signed-off-by: Han Xu <han.xu-3arQi8VN3Tc@public.gmane.org>
>> ---
>>  Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> index d02acaf..a2fd034 100644
>> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> @@ -13,6 +13,13 @@ Required properties:
>>      and GPMI DMA channel ID.
>>      Refer to dma.txt and fsl-mxs-dma.txt for details.
>>    - dma-names: Must be "rx-tx".
>> +  - clocks : The clocks needed by the gpmi controller. This field varies
>> +    depends on the SoC design, "gpmi-io" is mandatory but some platforms may
>> +    need several extra clocks, such as i.MX6 series, which requires "gpmi_apb,
>> +    gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules, while i.MX7 only
>> +    need gpmi_bch_apb. Please refer to the HW design manual.
>> +  - clock-names : the name of the clocks, please refer to the HW design
>> +    manual.
>
> No please list the names here (I assume what is above?). Also need to
> specify the order of the clocks. It would be clearest if you list things
> by exact compatible strings.

These are the exact clocks needed by i.MX6 and i.MX7. Order doesn't matter.

>
> Rob
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



-- 
Sincerely,

Han XU
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 4/6] mtd: nand: gpmi: correct bitflip for erased NAND page

[Boris Brezillon]

On Fri, 24 Jun 2016 16:40:09 -0500
Han Xu <han.xu-3arQi8VN3Tc@public.gmane.org> wrote:

> i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
> bitflip number for erased NAND page. So for these two platform, set the
> erase threshold to ecc_strength and if bitflip detected, GPMI driver
> will correct the data to all 0xFF.
> 
> Signed-off-by: Han Xu <han.xu-3arQi8VN3Tc@public.gmane.org>
> ---
>  drivers/mtd/nand/gpmi-nand/bch-regs.h  | 10 +++++++++
>  drivers/mtd/nand/gpmi-nand/gpmi-lib.c  |  5 +++++
>  drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 37 +++++++++++++++++++++++++++++++---
>  3 files changed, 49 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 228142c..2c44b88 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -30,7 +30,13 @@
>  #define BM_BCH_CTRL_COMPLETE_IRQ		(1 << 0)
>  
>  #define HW_BCH_STATUS0				0x00000010
> +
>  #define HW_BCH_MODE				0x00000020
> +#define BP_BCH_MODE_ERASE_THRESHOLD		0
> +#define BM_BCH_MODE_ERASE_THRESHOLD	(0xff << BP_BCH_MODE_ERASE_THRESHOLD)
> +#define BF_BCH_MODE_ERASE_THRESHOLD(v)		\
> +	(((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
> +
>  #define HW_BCH_ENCODEPTR			0x00000030
>  #define HW_BCH_DATAPTR				0x00000040
>  #define HW_BCH_METAPTR				0x00000050
> @@ -125,4 +131,8 @@
>  	)
>  
>  #define HW_BCH_VERSION				0x00000160
> +#define HW_BCH_DEBUG1				0x00000170
> +#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT	0
> +#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT		\
> +		(0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
>  #endif
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 358ff5d..0b5666a 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
>  			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
>  			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
>  
> +	/* Set erase threshold to ecc_strength for mx6qp and mx7 */
> +	if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> +		writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
> +			r->bch_regs + HW_BCH_MODE);
> +
>  	/* Set *all* chip selects to use layout 0. */
>  	writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
>  
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index aedaff3..db8e546 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1043,11 +1043,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  {
>  	struct gpmi_nand_data *this = nand_get_controller_data(chip);
>  	struct bch_geometry *nfc_geo = &this->bch_geometry;
> +	void __iomem *bch_regs = this->resources.bch_regs;
>  	void          *payload_virt;
>  	dma_addr_t    payload_phys;
>  	void          *auxiliary_virt;
>  	dma_addr_t    auxiliary_phys;
> -	unsigned int  i;
> +	unsigned int  i, j;
>  	unsigned char *status;
>  	unsigned int  max_bitflips = 0;
>  	int           ret;
> @@ -1087,9 +1088,14 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  			   nfc_geo->payload_size,
>  			   payload_virt, payload_phys);
>  
> -	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> -		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
> +	for (i = 0, j = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> +		if (*status == STATUS_GOOD)
> +			continue;
> +		if (*status == STATUS_ERASED) {
> +			/* count the number of erased chunks */
> +			j++;
>  			continue;
> +		}
>  
>  		if (*status == STATUS_UNCORRECTABLE) {
>  			int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
> @@ -1098,6 +1104,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  			int eccbytes;
>  			int flips;
>  
> +			/* shortcut for i.MX7 and i.MX6QP */
> +			if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this)) {
> +				mtd->ecc_stats.failed++;
> +				continue;
> +			}
> +
>  			/* Read ECC bytes into our internal raw_buffer */
>  			offset = nfc_geo->metadata_size * 8;
>  			offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
> @@ -1167,6 +1179,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
>  		max_bitflips = max_t(unsigned int, max_bitflips, *status);
>  	}
>  
> +	/*
> +	 * i.MX6QP and i.MX7 have dedicate register to check bitflips in the
> +	 * page, while it cannot tell in which chunk bitflips locate, memset
> +	 * all the data if bitflips exist and all chunks are erased.

Hm, that's a big problem: how can we decide if the number of bitflips
per ECC chunk exceed the bitflips threshold?

> +	 */
> +	if (j == nfc_geo->ecc_chunk_count &&
> +		(GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))) {
> +		int flips;
> +
> +		flips = readl(bch_regs + HW_BCH_DEBUG1);
> +		if (flips) {
> +			max_bitflips = max_t(unsigned int, max_bitflips,
> +					flips);

max_bitflips is supposed to contain the maximum number of bitflips per
ECC chunk not per page, so nand_base might return -EUCLEAN while it
should have returned zero in some cases.

Given this new information I'm not sure the HW solution to count
bitflips in erased pages is appropriate.

> +			memset(buf, ~0, nfc_geo->payload_size);
> +			memset(chip->oob_poi, ~0, mtd->oobsize);
> +			mtd->ecc_stats.corrected += flips;
> +		}
> +	}
> +
>  	if (oob_required) {
>  		/*
>  		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html