[RESEND PATCH 1/4] dt-bindings: display: amlogic,meson-vpu: Add optional power domain property

[RESEND PATCH 1/4] dt-bindings: display: amlogic,meson-vpu: Add optional power domain property

[Neil Armstrong]

The Video Processing Unit power domain was setup by the Vendor U-Boot,
add support for an optional Power Domain phandle to setup it from the kernel.

Acked-by: Rob Herring <robh@kernel.org> 
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 00f74ba..057b813 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -64,6 +64,10 @@ Required properties:
 - reg-names: should contain the names of the previous memory regions
 - interrupts: should contain the VENC Vsync interrupt number
 
+Optional properties:
+- power-domains: Optional phandle to associated power domain as described in
+	the file ../power/power_domain.txt
+
 Required nodes:
 
 The connections to the VPU output video ports are modeled using the OF graph
-- 
2.7.4

[RESEND PATCH 2/4] dt-bindings: display: amlogic,meson-dw-hdmi: Add optional HDMI 5V regulator

[Neil Armstrong]

On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index 7f040ed..bf4a180 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -48,6 +48,10 @@ Required properties:
   Documentation/devicetree/bindings/reset/reset.txt,
   the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
 
+Optional properties:
+- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
+  logic, as described in the file ../regulator/regulator.txt
+
 Required nodes:
 
 The connections to the HDMI ports are modeled using the OF graph
-- 
2.7.4