devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sricharan R <sricharan@codeaurora.org>
To: mturquette@baylibre.com, sboyd@codeaurora.org,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
Cc: sricharan@codeaurora.org
Subject: [PATCH v4 02/12] clk: mux: Split out register accessors for reuse
Date: Fri,  8 Dec 2017 15:12:20 +0530	[thread overview]
Message-ID: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org> (raw)
In-Reply-To: <1512726150-7204-1-git-send-email-sricharan@codeaurora.org>

From: Stephen Boyd <sboyd@codeaurora.org>

We want to reuse the logic in clk-mux.c for other clock drivers
that don't use readl as register accessors. Fortunately, there
really isn't much to the mux code besides the table indirection
and quirk flags if you assume any bit shifting and masking has
been done already. Pull that logic out into reusable functions
that operate on an optional table and some flags so that other
drivers can use the same logic.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/clk-mux.c        | 75 +++++++++++++++++++++++++++-----------------
 include/linux/clk-provider.h |  9 ++++--
 2 files changed, 54 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 39cabe1..22ebf99 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -26,35 +26,24 @@
  * parent - parent is adjustable through clk_set_parent
  */
 
-static u8 clk_mux_get_parent(struct clk_hw *hw)
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags)
 {
-	struct clk_mux *mux = to_clk_mux(hw);
 	int num_parents = clk_hw_get_num_parents(hw);
-	u32 val;
-
-	/*
-	 * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-	 * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-	 * to 0x7 (index starts at one)
-	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-	 * val = 0x4 really means "bit 2, index starts at bit 0"
-	 */
-	val = clk_readl(mux->reg) >> mux->shift;
-	val &= mux->mask;
 
-	if (mux->table) {
+	if (table) {
 		int i;
 
 		for (i = 0; i < num_parents; i++)
-			if (mux->table[i] == val)
+			if (table[i] == val)
 				return i;
 		return -EINVAL;
 	}
 
-	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
+	if (val && (flags & CLK_MUX_INDEX_BIT))
 		val = ffs(val) - 1;
 
-	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
+	if (val && (flags & CLK_MUX_INDEX_ONE))
 		val--;
 
 	if (val >= num_parents)
@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 
 	return val;
 }
+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
 
-static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+static u8 _clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
 	u32 val;
-	unsigned long flags = 0;
 
-	if (mux->table) {
-		index = mux->table[index];
+	/*
+	 * FIXME need a mux-specific flag to determine if val is bitwise or
+	 * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide,
+	 * but ranges from 0x1 to 0x7 (index starts at one)
+	 * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
+	 * val = 0x4 really means "bit 2, index starts at bit 0"
+	 */
+	val = clk_readl(mux->reg) >> mux->shift;
+	val &= mux->mask;
+
+	return clk_mux_get_parent(hw, val, mux->table, mux->flags);
+}
+
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags)
+{
+	unsigned int val = index;
+
+	if (table) {
+		val = table[val];
 	} else {
-		if (mux->flags & CLK_MUX_INDEX_BIT)
-			index = 1 << index;
+		if (flags & CLK_MUX_INDEX_BIT)
+			val = 1 << index;
 
-		if (mux->flags & CLK_MUX_INDEX_ONE)
-			index++;
+		if (flags & CLK_MUX_INDEX_ONE)
+			val++;
 	}
 
+	return val;
+}
+EXPORT_SYMBOL_GPL(clk_mux_reindex);
+
+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+	u32 val;
+	unsigned long flags = 0;
+
+	index = clk_mux_reindex(index, mux->table, mux->flags);
+
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
 	else
@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 }
 
 const struct clk_ops clk_mux_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 	.set_parent = clk_mux_set_parent,
 	.determine_rate = __clk_mux_determine_rate,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
 const struct clk_ops clk_mux_ro_ops = {
-	.get_parent = clk_mux_get_parent,
+	.get_parent = _clk_mux_get_parent,
 };
 EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
 
@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table(struct device *dev, const char *name,
 		const char * const *parent_names, u8 num_parents,
 		unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
 {
 	struct clk_mux *mux;
 	struct clk_hw *hw;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7c925e6..9578411 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -468,7 +468,7 @@ struct clk_hw *clk_hw_register_divider_table(struct device *dev,
 struct clk_mux {
 	struct clk_hw	hw;
 	void __iomem	*reg;
-	u32		*table;
+	unsigned int	*table;
 	u32		mask;
 	u8		shift;
 	u8		flags;
@@ -486,6 +486,11 @@ struct clk_mux {
 extern const struct clk_ops clk_mux_ops;
 extern const struct clk_ops clk_mux_ro_ops;
 
+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
+				unsigned int *table, unsigned long flags);
+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
+			     unsigned long flags);
+
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char * const *parent_names, u8 num_parents,
 		unsigned long flags,
@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table(struct device *dev, const char *name,
 		const char * const *parent_names, u8 num_parents,
 		unsigned long flags,
 		void __iomem *reg, u8 shift, u32 mask,
-		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+		u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
 
 void clk_unregister_mux(struct clk *clk);
 void clk_hw_unregister_mux(struct clk_hw *hw);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2017-12-08  9:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-08  9:42 [RESEND PATCH v4 00/12] Krait clocks + Krait CPUfreq Sricharan R
2017-12-08  9:42 ` [PATCH v4 01/12] ARM: Add Krait L2 register accessor functions Sricharan R
2017-12-08  9:42 ` Sricharan R [this message]
2017-12-08  9:42 ` [PATCH v4 03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2017-12-08  9:42 ` [PATCH v4 04/12] clk: qcom: Add HFPLL driver Sricharan R
2017-12-12 20:35   ` Rob Herring
2017-12-13 11:10     ` Sricharan R
2017-12-08  9:42 ` [PATCH v4 05/12] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2017-12-12 20:36   ` Rob Herring
2017-12-13 11:10     ` Sricharan R
2017-12-08  9:42 ` [PATCH v4 06/12] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2017-12-08  9:42 ` [PATCH v4 07/12] clk: qcom: Add support for Krait clocks Sricharan R
2017-12-08  9:42 ` [PATCH v4 08/12] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2017-12-12 20:38   ` Rob Herring
2017-12-13 11:42     ` Sricharan R
2017-12-08  9:42 ` [PATCH v4 09/12] clk: qcom: Add Krait clock controller driver Sricharan R
2017-12-12 20:51   ` Rob Herring
2017-12-13 11:11     ` Sricharan R
     [not found] ` <1512726150-7204-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-08  9:42   ` [PATCH v4 10/12] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2017-12-08  9:42 ` [PATCH v4 11/12] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2017-12-11  8:39   ` Viresh Kumar
2017-12-11 13:22     ` Sricharan R
2017-12-08  9:42 ` [PATCH v4 12/12] cpufreq: dt: Reintroduce independent_clocks platform data Sricharan R
2017-12-11  8:33   ` Viresh Kumar
2017-12-11 13:24     ` Sricharan R
  -- strict thread matches above, loose matches on Subject: below --
2017-12-08  9:29 [PATCH v4 00/12] Krait clocks + Krait CPUfreq Sricharan R
     [not found] ` <1512725401-4944-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-08  9:29   ` [PATCH v4 02/12] clk: mux: Split out register accessors for reuse Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1512726150-7204-3-git-send-email-sricharan@codeaurora.org \
    --to=sricharan@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).